* [PATCH 0/2] riscv: ptrace: NT_PRFPREG regset access fixes
@ 2020-07-23 23:21 Maciej W. Rozycki
2020-07-23 23:22 ` [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access Maciej W. Rozycki
2020-07-23 23:22 ` [PATCH 2/2] riscv: ptrace: Improve the style in NT_PRFPREG regset handling Maciej W. Rozycki
0 siblings, 2 replies; 12+ messages in thread
From: Maciej W. Rozycki @ 2020-07-23 23:21 UTC (permalink / raw)
To: linux-riscv; +Cc: Paul Walmsley, Palmer Dabbelt, Albert Ou, linux-kernel
Hi,
In the course of adding RISC-V/Linux support to `gdbserver' I examined
our Linux regset code to make sure I get the userland side right and
discovered a discrepancy between how our internal `user_regset_copyout'
and `user_regset_copyout' API has been defined and how we call it in the
RISC-V backend in the handling of the NT_PRFPREG regset. Additionally I
found that code violating our coding style.
To address these issues I made this small patch set, addressing each of
them separately. See individual change descriptions for details.
These changes are hopefully obviously correct, however to make sure I
have verified them manually with a HiFive Unleashed board running
`gdbserver' controlled remotely by GDB and also by running the full GDB
testsuite in the same environment using the lp64d ABI, without and with
the changes applied.
Please apply.
Maciej
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access
2020-07-23 23:21 [PATCH 0/2] riscv: ptrace: NT_PRFPREG regset access fixes Maciej W. Rozycki
@ 2020-07-23 23:22 ` Maciej W. Rozycki
2020-08-05 2:01 ` Palmer Dabbelt
2020-07-23 23:22 ` [PATCH 2/2] riscv: ptrace: Improve the style in NT_PRFPREG regset handling Maciej W. Rozycki
1 sibling, 1 reply; 12+ messages in thread
From: Maciej W. Rozycki @ 2020-07-23 23:22 UTC (permalink / raw)
To: linux-riscv
Cc: Paul Walmsley, Palmer Dabbelt, Albert Ou, linux-kernel, stable
Adjust the calls to `user_regset_copyout' and `user_regset_copyin' in
`riscv_fpr_get' and `riscv_fpr_set' respectively so as to use @start_pos
and @end_pos according to API documentation in <linux/regset.h>, that is
to point at the beginning and the end respectively of the data chunk to
be copied. Update @data accordingly, also for the first call, to make
it clear which structure member is accessed.
We currently have @start_pos fixed at 0 across all calls, which works as
a result of the implementation, in particular because we have no padding
between the FP general registers and the FP control and status register,
but appears not to have been the intent of the API and is not what other
ports do, requiring one to study the copy handlers to understand what is
going on here.
Signed-off-by: Maciej W. Rozycki <macro@wdc.com>
Fixes: b8c8a9590e4f ("RISC-V: Add FP register ptrace support for gdb.")
Cc: stable@vger.kernel.org # 4.20+
---
arch/riscv/kernel/ptrace.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
linux-riscv-ptrace-fcsr.diff
Index: linux-hv/arch/riscv/kernel/ptrace.c
===================================================================
--- linux-hv.orig/arch/riscv/kernel/ptrace.c
+++ linux-hv/arch/riscv/kernel/ptrace.c
@@ -61,10 +61,13 @@ static int riscv_fpr_get(struct task_str
int ret;
struct __riscv_d_ext_state *fstate = &target->thread.fstate;
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, fstate, 0,
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &fstate->f, 0,
offsetof(struct __riscv_d_ext_state, fcsr));
if (!ret) {
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, fstate, 0,
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &fstate->fcsr,
+ offsetof(struct __riscv_d_ext_state,
+ fcsr),
offsetof(struct __riscv_d_ext_state, fcsr) +
sizeof(fstate->fcsr));
}
@@ -80,10 +83,13 @@ static int riscv_fpr_set(struct task_str
int ret;
struct __riscv_d_ext_state *fstate = &target->thread.fstate;
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, fstate, 0,
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fstate->f, 0,
offsetof(struct __riscv_d_ext_state, fcsr));
if (!ret) {
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, fstate, 0,
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &fstate->fcsr,
+ offsetof(struct __riscv_d_ext_state,
+ fcsr),
offsetof(struct __riscv_d_ext_state, fcsr) +
sizeof(fstate->fcsr));
}
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] riscv: ptrace: Improve the style in NT_PRFPREG regset handling
2020-07-23 23:21 [PATCH 0/2] riscv: ptrace: NT_PRFPREG regset access fixes Maciej W. Rozycki
2020-07-23 23:22 ` [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access Maciej W. Rozycki
@ 2020-07-23 23:22 ` Maciej W. Rozycki
2020-08-05 2:01 ` Palmer Dabbelt
1 sibling, 1 reply; 12+ messages in thread
From: Maciej W. Rozycki @ 2020-07-23 23:22 UTC (permalink / raw)
To: linux-riscv; +Cc: Paul Walmsley, Palmer Dabbelt, Albert Ou, linux-kernel
Use an auxiliary variable for the size taken by floating point general
registers in `struct __riscv_d_ext_state' to improve the readability of
code in the `riscv_fpr_get' and `riscv_fpr_set' handlers, by avoiding
excessive line wrapping and extending beyond 80 columns. Also shuffle
local variables in the reverse Christmas tree order. No functional
change.
Signed-off-by: Maciej W. Rozycki <macro@wdc.com>
---
arch/riscv/kernel/ptrace.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
linux-riscv-ptrace-fpr-style.diff
Index: linux-hv/arch/riscv/kernel/ptrace.c
===================================================================
--- linux-hv.orig/arch/riscv/kernel/ptrace.c
+++ linux-hv/arch/riscv/kernel/ptrace.c
@@ -58,18 +58,16 @@ static int riscv_fpr_get(struct task_str
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
- int ret;
+ const size_t fgr_size = offsetof(struct __riscv_d_ext_state, fcsr);
struct __riscv_d_ext_state *fstate = &target->thread.fstate;
+ int ret;
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &fstate->f, 0,
- offsetof(struct __riscv_d_ext_state, fcsr));
+ fgr_size);
if (!ret) {
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &fstate->fcsr,
- offsetof(struct __riscv_d_ext_state,
- fcsr),
- offsetof(struct __riscv_d_ext_state, fcsr) +
- sizeof(fstate->fcsr));
+ &fstate->fcsr, fgr_size,
+ fgr_size + sizeof(fstate->fcsr));
}
return ret;
@@ -80,18 +78,16 @@ static int riscv_fpr_set(struct task_str
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
- int ret;
+ const size_t fgr_size = offsetof(struct __riscv_d_ext_state, fcsr);
struct __riscv_d_ext_state *fstate = &target->thread.fstate;
+ int ret;
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fstate->f, 0,
- offsetof(struct __riscv_d_ext_state, fcsr));
+ fgr_size);
if (!ret) {
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &fstate->fcsr,
- offsetof(struct __riscv_d_ext_state,
- fcsr),
- offsetof(struct __riscv_d_ext_state, fcsr) +
- sizeof(fstate->fcsr));
+ &fstate->fcsr, fgr_size,
+ fgr_size + sizeof(fstate->fcsr));
}
return ret;
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access
2020-07-23 23:22 ` [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access Maciej W. Rozycki
@ 2020-08-05 2:01 ` Palmer Dabbelt
2020-08-05 2:07 ` Al Viro
0 siblings, 1 reply; 12+ messages in thread
From: Palmer Dabbelt @ 2020-08-05 2:01 UTC (permalink / raw)
To: macro; +Cc: linux-riscv, Paul Walmsley, aou, linux-kernel, stable
On Thu, 23 Jul 2020 16:22:15 PDT (-0700), macro@wdc.com wrote:
> Adjust the calls to `user_regset_copyout' and `user_regset_copyin' in
> `riscv_fpr_get' and `riscv_fpr_set' respectively so as to use @start_pos
> and @end_pos according to API documentation in <linux/regset.h>, that is
> to point at the beginning and the end respectively of the data chunk to
> be copied. Update @data accordingly, also for the first call, to make
> it clear which structure member is accessed.
>
> We currently have @start_pos fixed at 0 across all calls, which works as
> a result of the implementation, in particular because we have no padding
> between the FP general registers and the FP control and status register,
> but appears not to have been the intent of the API and is not what other
> ports do, requiring one to study the copy handlers to understand what is
> going on here.
>
> Signed-off-by: Maciej W. Rozycki <macro@wdc.com>
> Fixes: b8c8a9590e4f ("RISC-V: Add FP register ptrace support for gdb.")
> Cc: stable@vger.kernel.org # 4.20+
> ---
> arch/riscv/kernel/ptrace.c | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> linux-riscv-ptrace-fcsr.diff
> Index: linux-hv/arch/riscv/kernel/ptrace.c
> ===================================================================
> --- linux-hv.orig/arch/riscv/kernel/ptrace.c
> +++ linux-hv/arch/riscv/kernel/ptrace.c
> @@ -61,10 +61,13 @@ static int riscv_fpr_get(struct task_str
> int ret;
> struct __riscv_d_ext_state *fstate = &target->thread.fstate;
>
> - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, fstate, 0,
> + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &fstate->f, 0,
> offsetof(struct __riscv_d_ext_state, fcsr));
As far as I can tell the current code works correctly, it just requires
knowledge of the layout of __riscv_d_ext_state to determine that it functions
correctly. This new code still requires that knowledge: the first blob copies
the F registers, but only works if the CSR is after the registers. If we fix
both of those the code seems easier to read, but I don't think splitting the
difference helps any.
So I guess what I'm saying is: maybe that second line should be changed to
something like "ARRAY_SIZE(fstate->f)"?
> if (!ret) {
> - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, fstate, 0,
> + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
> + &fstate->fcsr,
> + offsetof(struct __riscv_d_ext_state,
> + fcsr),
> offsetof(struct __riscv_d_ext_state, fcsr) +
> sizeof(fstate->fcsr));
> }
> @@ -80,10 +83,13 @@ static int riscv_fpr_set(struct task_str
> int ret;
> struct __riscv_d_ext_state *fstate = &target->thread.fstate;
>
> - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, fstate, 0,
> + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fstate->f, 0,
> offsetof(struct __riscv_d_ext_state, fcsr));
> if (!ret) {
> - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, fstate, 0,
> + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
> + &fstate->fcsr,
> + offsetof(struct __riscv_d_ext_state,
> + fcsr),
> offsetof(struct __riscv_d_ext_state, fcsr) +
> sizeof(fstate->fcsr));
> }
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] riscv: ptrace: Improve the style in NT_PRFPREG regset handling
2020-07-23 23:22 ` [PATCH 2/2] riscv: ptrace: Improve the style in NT_PRFPREG regset handling Maciej W. Rozycki
@ 2020-08-05 2:01 ` Palmer Dabbelt
0 siblings, 0 replies; 12+ messages in thread
From: Palmer Dabbelt @ 2020-08-05 2:01 UTC (permalink / raw)
To: macro; +Cc: linux-riscv, Paul Walmsley, aou, linux-kernel
On Thu, 23 Jul 2020 16:22:30 PDT (-0700), macro@wdc.com wrote:
> Use an auxiliary variable for the size taken by floating point general
> registers in `struct __riscv_d_ext_state' to improve the readability of
> code in the `riscv_fpr_get' and `riscv_fpr_set' handlers, by avoiding
> excessive line wrapping and extending beyond 80 columns. Also shuffle
> local variables in the reverse Christmas tree order. No functional
> change.
>
> Signed-off-by: Maciej W. Rozycki <macro@wdc.com>
> ---
> arch/riscv/kernel/ptrace.c | 24 ++++++++++--------------
> 1 file changed, 10 insertions(+), 14 deletions(-)
>
> linux-riscv-ptrace-fpr-style.diff
> Index: linux-hv/arch/riscv/kernel/ptrace.c
> ===================================================================
> --- linux-hv.orig/arch/riscv/kernel/ptrace.c
> +++ linux-hv/arch/riscv/kernel/ptrace.c
> @@ -58,18 +58,16 @@ static int riscv_fpr_get(struct task_str
> unsigned int pos, unsigned int count,
> void *kbuf, void __user *ubuf)
> {
> - int ret;
> + const size_t fgr_size = offsetof(struct __riscv_d_ext_state, fcsr);
> struct __riscv_d_ext_state *fstate = &target->thread.fstate;
> + int ret;
>
> ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &fstate->f, 0,
> - offsetof(struct __riscv_d_ext_state, fcsr));
> + fgr_size);
> if (!ret) {
> ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
> - &fstate->fcsr,
> - offsetof(struct __riscv_d_ext_state,
> - fcsr),
> - offsetof(struct __riscv_d_ext_state, fcsr) +
> - sizeof(fstate->fcsr));
> + &fstate->fcsr, fgr_size,
> + fgr_size + sizeof(fstate->fcsr));
> }
>
> return ret;
> @@ -80,18 +78,16 @@ static int riscv_fpr_set(struct task_str
> unsigned int pos, unsigned int count,
> const void *kbuf, const void __user *ubuf)
> {
> - int ret;
> + const size_t fgr_size = offsetof(struct __riscv_d_ext_state, fcsr);
> struct __riscv_d_ext_state *fstate = &target->thread.fstate;
> + int ret;
>
> ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fstate->f, 0,
> - offsetof(struct __riscv_d_ext_state, fcsr));
> + fgr_size);
> if (!ret) {
> ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
> - &fstate->fcsr,
> - offsetof(struct __riscv_d_ext_state,
> - fcsr),
> - offsetof(struct __riscv_d_ext_state, fcsr) +
> - sizeof(fstate->fcsr));
> + &fstate->fcsr, fgr_size,
> + fgr_size + sizeof(fstate->fcsr));
> }
>
> return ret;
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
(Though the comments in the first patch apply here)
Thanks!
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access
2020-08-05 2:01 ` Palmer Dabbelt
@ 2020-08-05 2:07 ` Al Viro
2020-08-05 2:20 ` Palmer Dabbelt
0 siblings, 1 reply; 12+ messages in thread
From: Al Viro @ 2020-08-05 2:07 UTC (permalink / raw)
To: Palmer Dabbelt
Cc: macro, linux-riscv, Paul Walmsley, aou, linux-kernel, stable
On Tue, Aug 04, 2020 at 07:01:01PM -0700, Palmer Dabbelt wrote:
> > We currently have @start_pos fixed at 0 across all calls, which works as
> > a result of the implementation, in particular because we have no padding
> > between the FP general registers and the FP control and status register,
> > but appears not to have been the intent of the API and is not what other
> > ports do, requiring one to study the copy handlers to understand what is
> > going on here.
start_pos *is* fixed at 0 and it's going to go away, along with the
sodding user_regset_copyout() very shortly. ->get() is simply a bad API.
See vfs.git#work.regset for replacement. And ->put() is also going to be
taken out and shot (next cycle, most likely).
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access
2020-08-05 2:07 ` Al Viro
@ 2020-08-05 2:20 ` Palmer Dabbelt
2020-08-05 2:48 ` Al Viro
0 siblings, 1 reply; 12+ messages in thread
From: Palmer Dabbelt @ 2020-08-05 2:20 UTC (permalink / raw)
To: viro; +Cc: macro, linux-riscv, Paul Walmsley, aou, linux-kernel, stable
On Tue, 04 Aug 2020 19:07:45 PDT (-0700), viro@zeniv.linux.org.uk wrote:
> On Tue, Aug 04, 2020 at 07:01:01PM -0700, Palmer Dabbelt wrote:
>
>> > We currently have @start_pos fixed at 0 across all calls, which works as
>> > a result of the implementation, in particular because we have no padding
>> > between the FP general registers and the FP control and status register,
>> > but appears not to have been the intent of the API and is not what other
>> > ports do, requiring one to study the copy handlers to understand what is
>> > going on here.
>
> start_pos *is* fixed at 0 and it's going to go away, along with the
> sodding user_regset_copyout() very shortly. ->get() is simply a bad API.
> See vfs.git#work.regset for replacement. And ->put() is also going to be
> taken out and shot (next cycle, most likely).
I'm not sure I understand what you're saying, but given that branch replaces
all of this I guess it's best to just do nothing on our end here?
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access
2020-08-05 2:20 ` Palmer Dabbelt
@ 2020-08-05 2:48 ` Al Viro
2020-08-05 3:15 ` Palmer Dabbelt
2020-08-05 10:25 ` Maciej W. Rozycki
0 siblings, 2 replies; 12+ messages in thread
From: Al Viro @ 2020-08-05 2:48 UTC (permalink / raw)
To: Palmer Dabbelt
Cc: macro, linux-riscv, Paul Walmsley, aou, linux-kernel, stable
On Tue, Aug 04, 2020 at 07:20:05PM -0700, Palmer Dabbelt wrote:
> On Tue, 04 Aug 2020 19:07:45 PDT (-0700), viro@zeniv.linux.org.uk wrote:
> > On Tue, Aug 04, 2020 at 07:01:01PM -0700, Palmer Dabbelt wrote:
> >
> > > > We currently have @start_pos fixed at 0 across all calls, which works as
> > > > a result of the implementation, in particular because we have no padding
> > > > between the FP general registers and the FP control and status register,
> > > > but appears not to have been the intent of the API and is not what other
> > > > ports do, requiring one to study the copy handlers to understand what is
> > > > going on here.
> >
> > start_pos *is* fixed at 0 and it's going to go away, along with the
> > sodding user_regset_copyout() very shortly. ->get() is simply a bad API.
> > See vfs.git#work.regset for replacement. And ->put() is also going to be
> > taken out and shot (next cycle, most likely).
>
> I'm not sure I understand what you're saying, but given that branch replaces
> all of this I guess it's best to just do nothing on our end here?
It doesn't replace ->put() (for now); it _does_ replace ->get() and AFAICS the
replacement is much saner:
static int riscv_fpr_get(struct task_struct *target,
const struct user_regset *regset,
struct membuf to)
{
struct __riscv_d_ext_state *fstate = &target->thread.fstate;
membuf_write(&to, fstate, offsetof(struct __riscv_d_ext_state, fcsr));
membuf_store(&to, fstate->fcsr);
return membuf_zero(&to, 4); // explicitly pad
}
user_regset_copyout() calling conventions are atrocious and so are those of
regset ->get(). The best thing to do with both is to take them out of their
misery and be done with that. Do you see any problems with riscv gdbserver
on current linux-next? If not, I'd rather see that "API" simply go away...
If there are problems, I would very much prefer fixes on top of what's done
in that branch.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access
2020-08-05 2:48 ` Al Viro
@ 2020-08-05 3:15 ` Palmer Dabbelt
2020-08-05 10:25 ` Maciej W. Rozycki
1 sibling, 0 replies; 12+ messages in thread
From: Palmer Dabbelt @ 2020-08-05 3:15 UTC (permalink / raw)
To: viro; +Cc: macro, linux-riscv, Paul Walmsley, aou, linux-kernel, stable
On Tue, 04 Aug 2020 19:48:07 PDT (-0700), viro@zeniv.linux.org.uk wrote:
> On Tue, Aug 04, 2020 at 07:20:05PM -0700, Palmer Dabbelt wrote:
>> On Tue, 04 Aug 2020 19:07:45 PDT (-0700), viro@zeniv.linux.org.uk wrote:
>> > On Tue, Aug 04, 2020 at 07:01:01PM -0700, Palmer Dabbelt wrote:
>> >
>> > > > We currently have @start_pos fixed at 0 across all calls, which works as
>> > > > a result of the implementation, in particular because we have no padding
>> > > > between the FP general registers and the FP control and status register,
>> > > > but appears not to have been the intent of the API and is not what other
>> > > > ports do, requiring one to study the copy handlers to understand what is
>> > > > going on here.
>> >
>> > start_pos *is* fixed at 0 and it's going to go away, along with the
>> > sodding user_regset_copyout() very shortly. ->get() is simply a bad API.
>> > See vfs.git#work.regset for replacement. And ->put() is also going to be
>> > taken out and shot (next cycle, most likely).
>>
>> I'm not sure I understand what you're saying, but given that branch replaces
>> all of this I guess it's best to just do nothing on our end here?
>
> It doesn't replace ->put() (for now); it _does_ replace ->get() and AFAICS the
> replacement is much saner:
>
> static int riscv_fpr_get(struct task_struct *target,
> const struct user_regset *regset,
> struct membuf to)
> {
> struct __riscv_d_ext_state *fstate = &target->thread.fstate;
>
> membuf_write(&to, fstate, offsetof(struct __riscv_d_ext_state, fcsr));
> membuf_store(&to, fstate->fcsr);
> return membuf_zero(&to, 4); // explicitly pad
> }
>
> user_regset_copyout() calling conventions are atrocious and so are those of
> regset ->get(). The best thing to do with both is to take them out of their
> misery and be done with that. Do you see any problems with riscv gdbserver
> on current linux-next? If not, I'd rather see that "API" simply go away...
> If there are problems, I would very much prefer fixes on top of what's done
> in that branch.
I guess my confusion was about "start_pos *is* fixed at 0": it certainly is
zero in the code right now, but when poking around while review the patch I
didn't see any reason that must be so. Admittedly all I did was read the
prototype and function, so maybe I'm just missing something. That said, if
it's all going away anyway then I don't really care either way.
As far as I can tell the patch set in question (the RISC-V one) doesn't change
any functionality. I don't actually use GDB, but I haven't seen any issues
reported in a few years so if there is one I've missed it.
I did this ptrace stuff many years ago (IIRC it was actually my first RISC-V
Linux patch), and all I really remember is that it seemed way more complicated
than it needed to be. I'm happy to just drop our patch set, as yours looks way
cleaner to me and if you're already planning on fixing put() then it doesn't
seem worth the churn.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access
2020-08-05 2:48 ` Al Viro
2020-08-05 3:15 ` Palmer Dabbelt
@ 2020-08-05 10:25 ` Maciej W. Rozycki
2020-08-05 19:48 ` Palmer Dabbelt
1 sibling, 1 reply; 12+ messages in thread
From: Maciej W. Rozycki @ 2020-08-05 10:25 UTC (permalink / raw)
To: Al Viro
Cc: Palmer Dabbelt, linux-riscv, Paul Walmsley, aou, linux-kernel, stable
On Wed, 5 Aug 2020, Al Viro wrote:
> > I'm not sure I understand what you're saying, but given that branch replaces
> > all of this I guess it's best to just do nothing on our end here?
>
> It doesn't replace ->put() (for now); it _does_ replace ->get() and AFAICS the
> replacement is much saner:
>
> static int riscv_fpr_get(struct task_struct *target,
> const struct user_regset *regset,
> struct membuf to)
> {
> struct __riscv_d_ext_state *fstate = &target->thread.fstate;
>
> membuf_write(&to, fstate, offsetof(struct __riscv_d_ext_state, fcsr));
> membuf_store(&to, fstate->fcsr);
> return membuf_zero(&to, 4); // explicitly pad
> }
I'm glad to see the old interface go, it was cumbersome.
> user_regset_copyout() calling conventions are atrocious and so are those of
> regset ->get(). The best thing to do with both is to take them out of their
> misery and be done with that. Do you see any problems with riscv gdbserver
> on current linux-next? If not, I'd rather see that "API" simply go away...
> If there are problems, I would very much prefer fixes on top of what's done
> in that branch.
I can push linux-next through regression-testing with RISC-V gdbserver
and/or native GDB if that would help. This is also used with core dumps,
but honestly I don't know what state RISC-V support is in in the BFD/GDB's
core dump interpreter, as people tend to forget about the core dump
feature nowadays.
Maciej
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access
2020-08-05 10:25 ` Maciej W. Rozycki
@ 2020-08-05 19:48 ` Palmer Dabbelt
2020-08-19 20:00 ` Maciej W. Rozycki
0 siblings, 1 reply; 12+ messages in thread
From: Palmer Dabbelt @ 2020-08-05 19:48 UTC (permalink / raw)
To: macro; +Cc: viro, linux-riscv, Paul Walmsley, aou, linux-kernel, stable
On Wed, 05 Aug 2020 03:25:11 PDT (-0700), macro@wdc.com wrote:
> On Wed, 5 Aug 2020, Al Viro wrote:
>
>> > I'm not sure I understand what you're saying, but given that branch replaces
>> > all of this I guess it's best to just do nothing on our end here?
>>
>> It doesn't replace ->put() (for now); it _does_ replace ->get() and AFAICS the
>> replacement is much saner:
>>
>> static int riscv_fpr_get(struct task_struct *target,
>> const struct user_regset *regset,
>> struct membuf to)
>> {
>> struct __riscv_d_ext_state *fstate = &target->thread.fstate;
>>
>> membuf_write(&to, fstate, offsetof(struct __riscv_d_ext_state, fcsr));
>> membuf_store(&to, fstate->fcsr);
>> return membuf_zero(&to, 4); // explicitly pad
>> }
>
> I'm glad to see the old interface go, it was cumbersome.
>
>> user_regset_copyout() calling conventions are atrocious and so are those of
>> regset ->get(). The best thing to do with both is to take them out of their
>> misery and be done with that. Do you see any problems with riscv gdbserver
>> on current linux-next? If not, I'd rather see that "API" simply go away...
>> If there are problems, I would very much prefer fixes on top of what's done
>> in that branch.
>
> I can push linux-next through regression-testing with RISC-V gdbserver
> and/or native GDB if that would help. This is also used with core dumps,
> but honestly I don't know what state RISC-V support is in in the BFD/GDB's
> core dump interpreter, as people tend to forget about the core dump
> feature nowadays.
IIRC Andrew does GDB test suite runs sometimes natively on Linux as part of
general GDB maintiance and we don't see major issues, but I'm pretty checked
out of GDB development these days so he would know better than I do. It's
always great to have someone test stuff, though -- and I doubt he's testing
linux-next. It's been on my TODO list for a long time now to put together
tip-of-tree testing for the various projects but I've never gotten around to
doing it.
Oddly enough, despite not really using GDB I have used it for core dumps -- I
was writing a tool to convert commit logs to coredumps with the GDB reverse
debugging annotations, but I never got around to finishing it.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access
2020-08-05 19:48 ` Palmer Dabbelt
@ 2020-08-19 20:00 ` Maciej W. Rozycki
0 siblings, 0 replies; 12+ messages in thread
From: Maciej W. Rozycki @ 2020-08-19 20:00 UTC (permalink / raw)
To: Palmer Dabbelt
Cc: viro, linux-riscv, Paul Walmsley, aou, linux-kernel, stable
On Wed, 5 Aug 2020, Palmer Dabbelt wrote:
> > I can push linux-next through regression-testing with RISC-V gdbserver
> > and/or native GDB if that would help. This is also used with core dumps,
> > but honestly I don't know what state RISC-V support is in in the BFD/GDB's
> > core dump interpreter, as people tend to forget about the core dump
> > feature nowadays.
>
> IIRC Andrew does GDB test suite runs sometimes natively on Linux as part of
> general GDB maintiance and we don't see major issues, but I'm pretty checked
> out of GDB development these days so he would know better than I do. It's
> always great to have someone test stuff, though -- and I doubt he's testing
> linux-next. It's been on my TODO list for a long time now to put together
> tip-of-tree testing for the various projects but I've never gotten around to
> doing it.
I have now run GDB regression testing with remote `gdbserver' on a HiFive
Unleashed, lp64d ABI only, comparing 5.8.0-next-20200814 against 5.8.0-rc5
with no issues observed.
> Oddly enough, despite not really using GDB I have used it for core dumps -- I
> was writing a tool to convert commit logs to coredumps with the GDB reverse
> debugging annotations, but I never got around to finishing it.
I fiddled with core dump handling verification for GDB back in my MIPS
days expanding an existing test case to interpret an OS-generated core
dump in addition to one produced by GDB's `gcore' command, although in the
case of local testing only (i.e. either native or running `gdbserver' on
the same test machine GDB runs); this restriction is due to the need to
isolate the core file produced, as it may or may not have a .$pid suffix
attached (or may have yet another name variation with non-Linux targets),
which is somewhat complicated with commands run remotely (though I imagine
the restriction could be lifted by someone sufficiently inclined).
The relevant tests results are as follows (on a successful run):
PASS: gdb.threads/tls-core.exp: native: load core file
PASS: gdb.threads/tls-core.exp: native: print thread-local storage variable
PASS: gdb.threads/tls-core.exp: gcore: load core file
PASS: gdb.threads/tls-core.exp: gcore: print thread-local storage variable
and the binutils-gdb change is commit d9f6d7f8b636 ("testsuite: Extend TLS
core file testing with an OS-generated dump"). So that part should be
covered at least to some extent by automated testing.
However something is not exactly right and I recall having an issue
recorded for later investigation (which may not happen given the recent
turn of events) that RISC-V/Linux does not actually dump cores even in the
circumstances it is supposed to (i.e. the combination of the specific
signal delivered and RLIMIT_CORE set to infinity imply it).
Indeed I have run the test natively now and I got:
PASS: gdb.threads/tls-core.exp: successfully compiled posix threads test case
WARNING: can't generate a core file - core tests suppressed - check ulimit -c
PASS: gdb.threads/tls-core.exp: gcore
UNSUPPORTED: gdb.threads/tls-core.exp: native: load core file
UNSUPPORTED: gdb.threads/tls-core.exp: native: print thread-local storage variable
PASS: gdb.threads/tls-core.exp: gcore: load core file
PASS: gdb.threads/tls-core.exp: gcore: print thread-local storage variable
which means things are not actually sound. Likewise if I run the test
program manually:
$ ulimit -c
unlimited
$ ./tls-core
Aborted (core dumped)
$ ls -la core*
ls: cannot access 'core*': No such file or directory
$
-- oops!
[As it turned out MIPS core dump handling was completely messed up both
on the Linux and the GDB side. See binutils-gdb commit d8dab6c3bbe6
("MIPS/Linux: Correct o32 core file FGR interpretation") if interested;
there are further Linux commit references there.]
Maciej
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-08-19 20:02 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-23 23:21 [PATCH 0/2] riscv: ptrace: NT_PRFPREG regset access fixes Maciej W. Rozycki
2020-07-23 23:22 ` [PATCH 1/2] riscv: ptrace: Use the correct API for `fcsr' access Maciej W. Rozycki
2020-08-05 2:01 ` Palmer Dabbelt
2020-08-05 2:07 ` Al Viro
2020-08-05 2:20 ` Palmer Dabbelt
2020-08-05 2:48 ` Al Viro
2020-08-05 3:15 ` Palmer Dabbelt
2020-08-05 10:25 ` Maciej W. Rozycki
2020-08-05 19:48 ` Palmer Dabbelt
2020-08-19 20:00 ` Maciej W. Rozycki
2020-07-23 23:22 ` [PATCH 2/2] riscv: ptrace: Improve the style in NT_PRFPREG regset handling Maciej W. Rozycki
2020-08-05 2:01 ` Palmer Dabbelt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).