From: Hans de Goede <hdegoede@redhat.com>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>,
linux-kernel@vger.kernel.org
Cc: Mark Gross <markgross@kernel.org>,
Maximilian Luz <luzmaximilian@gmail.com>,
Divya Bharathi <divya.bharathi@dell.com>,
Prasanth Ksr <prasanth.ksr@dell.com>,
Henrique de Moraes Holschuh <hmh@hmh.eng.br>,
platform-driver-x86@vger.kernel.org, Dell.Client.Kernel@dell.com,
ibm-acpi-devel@lists.sourceforge.net
Subject: Re: [PATCH] platform: move from strlcpy with unused retval to strscpy
Date: Fri, 26 Aug 2022 12:01:18 +0200 [thread overview]
Message-ID: <b0d54cbc-ea5d-4cad-5017-c4afd4462942@redhat.com> (raw)
In-Reply-To: <20220818210058.7229-1-wsa+renesas@sang-engineering.com>
Hi,
On 8/18/22 23:00, Wolfram Sang wrote:
> Follow the advice of the below link and prefer 'strscpy' in this
> subsystem. Conversion is 1:1 because the return value is not used.
> Generated by a coccinelle script.
>
> Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Thank you for your patch, I've applied this patch to my review-hans
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans
Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.
Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.
Regards,
Hans
> ---
> drivers/platform/surface/surface3_power.c | 2 +-
> drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 2 +-
> drivers/platform/x86/intel/chtwc_int33fe.c | 6 +++---
> drivers/platform/x86/thinkpad_acpi.c | 4 ++--
> 4 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/platform/surface/surface3_power.c b/drivers/platform/surface/surface3_power.c
> index 444ec81ba02d..4c53d116d59b 100644
> --- a/drivers/platform/surface/surface3_power.c
> +++ b/drivers/platform/surface/surface3_power.c
> @@ -519,7 +519,7 @@ static int mshw0011_probe(struct i2c_client *client)
> i2c_set_clientdata(client, data);
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
> + strscpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
>
> bat0 = i2c_acpi_new_device(dev, 1, &board_info);
> if (IS_ERR(bat0))
> diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> index 636bdfa83284..0a6411a8a104 100644
> --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> @@ -270,7 +270,7 @@ void strlcpy_attr(char *dest, char *src)
> size_t len = strlen(src) + 1;
>
> if (len > 1 && len <= MAX_BUFF)
> - strlcpy(dest, src, len);
> + strscpy(dest, src, len);
>
> /*len can be zero because any property not-applicable to attribute can
> * be empty so check only for too long buffers and log error
> diff --git a/drivers/platform/x86/intel/chtwc_int33fe.c b/drivers/platform/x86/intel/chtwc_int33fe.c
> index c52ac23e2331..1ea989df513c 100644
> --- a/drivers/platform/x86/intel/chtwc_int33fe.c
> +++ b/drivers/platform/x86/intel/chtwc_int33fe.c
> @@ -270,7 +270,7 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
> }
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
> + strscpy(board_info.type, "max17047", I2C_NAME_SIZE);
> board_info.dev_name = "max17047";
> board_info.fwnode = fwnode;
> data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info);
> @@ -361,7 +361,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev)
> }
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
> + strscpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
> board_info.dev_name = "fusb302";
> board_info.fwnode = fwnode;
> board_info.irq = fusb302_irq;
> @@ -381,7 +381,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev)
> memset(&board_info, 0, sizeof(board_info));
> board_info.dev_name = "pi3usb30532";
> board_info.fwnode = fwnode;
> - strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
> + strscpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
>
> data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
> if (IS_ERR(data->pi3usb30532)) {
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index 22d4e8633e30..8dad0428a83c 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -7623,9 +7623,9 @@ static int __init volume_create_alsa_mixer(void)
> data = card->private_data;
> data->card = card;
>
> - strlcpy(card->driver, TPACPI_ALSA_DRVNAME,
> + strscpy(card->driver, TPACPI_ALSA_DRVNAME,
> sizeof(card->driver));
> - strlcpy(card->shortname, TPACPI_ALSA_SHRTNAME,
> + strscpy(card->shortname, TPACPI_ALSA_SHRTNAME,
> sizeof(card->shortname));
> snprintf(card->mixername, sizeof(card->mixername), "ThinkPad EC %s",
> (thinkpad_id.ec_version_str) ?
prev parent reply other threads:[~2022-08-26 10:02 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-18 21:00 [PATCH] platform: move from strlcpy with unused retval to strscpy Wolfram Sang
2022-08-18 21:58 ` Maximilian Luz
2022-08-19 6:22 ` Andy Shevchenko
2022-08-19 8:57 ` Hans de Goede
2022-08-19 9:19 ` Wolfram Sang
2022-08-19 9:20 ` Hans de Goede
2022-08-26 10:01 ` Hans de Goede [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b0d54cbc-ea5d-4cad-5017-c4afd4462942@redhat.com \
--to=hdegoede@redhat.com \
--cc=Dell.Client.Kernel@dell.com \
--cc=divya.bharathi@dell.com \
--cc=hmh@hmh.eng.br \
--cc=ibm-acpi-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=luzmaximilian@gmail.com \
--cc=markgross@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=prasanth.ksr@dell.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).