[PATCH 5.4 00/37] 5.4.145-rc1 review

[PATCH 5.4 00/37] 5.4.145-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.145 release.
There are 37 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 12 Sep 2021 12:29:07 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.145-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.145-rc1

Marek Behún <kabel@kernel.org>
    PCI: Call Max Payload Size-related fixup quirks early

Paul Gortmaker <paul.gortmaker@windriver.com>
    x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: fix unsafe memory usage in xhci tracing

Chunfeng Yun <chunfeng.yun@mediatek.com>
    usb: mtu3: fix the wrong HS mult value

Chunfeng Yun <chunfeng.yun@mediatek.com>
    usb: mtu3: use @mult for HS isoc or intr

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
    usb: host: xhci-rcar: Don't reload firmware after the completion

Alexander Tsoy <alexander@tsoy.me>
    ALSA: usb-audio: Add registration quirk for JBL Quantum 800

Qu Wenruo <wqu@suse.com>
    Revert "btrfs: compression: don't try to compress if we don't have enough pages"

Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
    x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating

Hayes Wang <hayeswang@realtek.com>
    Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM"

Muchun Song <songmuchun@bytedance.com>
    mm/page_alloc: speed up the iteration of max_order

Esben Haabendal <esben@geanix.com>
    net: ll_temac: Remove left-over debug message

Fangrui Song <maskray@google.com>
    powerpc/boot: Delete unneeded .globl _zimage_start

Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
    ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2)

Tom Rix <trix@redhat.com>
    USB: serial: mos7720: improve OOM-handling in read_mos_reg()

Liu Jian <liujian56@huawei.com>
    igmp: Add ip_mc_list lock in ip_check_mc_rcu

Pavel Skripkin <paskripkin@gmail.com>
    media: stkwebcam: fix memory leak in stk_camera_probe

Vineet Gupta <vgupta@synopsys.com>
    ARC: wireup clone3 syscall

Zubin Mithra <zsm@chromium.org>
    ALSA: pcm: fix divide error in snd_pcm_lib_ioctl

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek: Workaround for conflicting SSID on ASUS ROG Strix G17

Ben Dooks <ben-linux@fluff.org>
    ARM: 8918/2: only build return_address() if needed

Christoph Hellwig <hch@lst.de>
    cryptoloop: add a deprecation warning

Kim Phillips <kim.phillips@amd.com>
    perf/x86/amd/power: Assign pmu.module

Kim Phillips <kim.phillips@amd.com>
    perf/x86/amd/ibs: Work around erratum #1197

Xiaoyao Li <xiaoyao.li@intel.com>
    perf/x86/intel/pt: Fix mask of num_address_ranges

Shai Malin <smalin@marvell.com>
    qede: Fix memset corruption

Harini Katakam <harini.katakam@xilinx.com>
    net: macb: Add a NULL check on desc_ptp

Shai Malin <smalin@marvell.com>
    qed: Fix the VF msix vectors flow

Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
    reset: reset-zynqmp: Fixed the argument data type

Krzysztof Hałasa <khalasa@piap.pl>
    gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats

Randy Dunlap <rdunlap@infradead.org>
    xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG

Peter Zijlstra <peterz@infradead.org>
    kthread: Fix PF_KTHREAD vs to_kthread() race

Eric Biggers <ebiggers@google.com>
    ubifs: report correct st_size for encrypted symlinks

Eric Biggers <ebiggers@google.com>
    f2fs: report correct st_size for encrypted symlinks

Eric Biggers <ebiggers@google.com>
    ext4: report correct st_size for encrypted symlinks

Eric Biggers <ebiggers@google.com>
    fscrypt: add fscrypt_symlink_getattr() for computing st_size

Theodore Ts'o <tytso@mit.edu>
    ext4: fix race writing to an inline_data file while its xattrs are changing


-------------

Diffstat:

 Makefile                                     |  4 +--
 arch/arc/Kconfig                             |  1 +
 arch/arc/include/asm/syscalls.h              |  1 +
 arch/arc/include/uapi/asm/unistd.h           |  1 +
 arch/arc/kernel/entry.S                      | 12 +++++++
 arch/arc/kernel/process.c                    |  7 ++--
 arch/arc/kernel/sys.c                        |  1 +
 arch/arm/kernel/Makefile                     |  6 +++-
 arch/arm/kernel/return_address.c             |  4 ---
 arch/powerpc/boot/crt0.S                     |  3 --
 arch/x86/events/amd/ibs.c                    |  8 +++++
 arch/x86/events/amd/iommu.c                  | 47 ++++++++++++++-----------
 arch/x86/events/amd/power.c                  |  1 +
 arch/x86/events/intel/pt.c                   |  2 +-
 arch/x86/kernel/reboot.c                     |  3 +-
 arch/xtensa/Kconfig                          |  2 +-
 drivers/block/Kconfig                        |  4 +--
 drivers/block/cryptoloop.c                   |  2 ++
 drivers/gpu/ipu-v3/ipu-cpmem.c               | 30 ++++++++--------
 drivers/media/usb/stkwebcam/stk-webcam.c     |  6 ++--
 drivers/net/ethernet/cadence/macb_ptp.c      | 11 +++++-
 drivers/net/ethernet/qlogic/qed/qed_main.c   |  7 +++-
 drivers/net/ethernet/qlogic/qede/qede_main.c |  2 +-
 drivers/net/ethernet/realtek/r8169_main.c    |  1 +
 drivers/net/ethernet/xilinx/ll_temac_main.c  |  4 +--
 drivers/pci/quirks.c                         | 12 +++----
 drivers/reset/reset-zynqmp.c                 |  3 +-
 drivers/usb/host/xhci-debugfs.c              |  6 ++--
 drivers/usb/host/xhci-rcar.c                 |  7 ++++
 drivers/usb/host/xhci-trace.h                |  8 ++---
 drivers/usb/host/xhci.h                      | 52 +++++++++++++++-------------
 drivers/usb/mtu3/mtu3_gadget.c               |  6 ++--
 drivers/usb/serial/mos7720.c                 |  4 ++-
 fs/btrfs/inode.c                             |  2 +-
 fs/crypto/hooks.c                            | 44 +++++++++++++++++++++++
 fs/ext4/inline.c                             |  6 ++++
 fs/ext4/symlink.c                            | 11 +++++-
 fs/f2fs/namei.c                              | 11 +++++-
 fs/ubifs/file.c                              | 12 ++++++-
 include/linux/fscrypt.h                      |  7 ++++
 kernel/kthread.c                             | 43 +++++++++++++++--------
 kernel/sched/fair.c                          |  2 +-
 mm/page_alloc.c                              |  8 ++---
 net/ipv4/icmp.c                              | 23 ++++++++++--
 net/ipv4/igmp.c                              |  2 ++
 sound/core/pcm_lib.c                         |  2 +-
 sound/pci/hda/patch_realtek.c                | 10 ++++++
 sound/usb/quirks.c                           |  1 +
 48 files changed, 321 insertions(+), 131 deletions(-)

[PATCH 5.4 01/37] ext4: fix race writing to an inline_data file while its xattrs are changing

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit a54c4613dac1500b40e4ab55199f7c51f028e848 upstream.

The location of the system.data extended attribute can change whenever
xattr_sem is not taken.  So we need to recalculate the i_inline_off
field since it mgiht have changed between ext4_write_begin() and
ext4_write_end().

This means that caching i_inline_off is probably not helpful, so in
the long run we should probably get rid of it and shrink the in-memory
ext4 inode slightly, but let's fix the race the simple way for now.

Cc: stable@kernel.org
Fixes: f19d5870cbf72 ("ext4: add normal write support for inline data")
Reported-by: syzbot+13146364637c7363a7de@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inline.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -750,6 +750,12 @@ int ext4_write_inline_data_end(struct in
 	ext4_write_lock_xattr(inode, &no_expand);
 	BUG_ON(!ext4_has_inline_data(inode));
 
+	/*
+	 * ei->i_inline_off may have changed since ext4_write_begin()
+	 * called ext4_try_to_write_inline_data()
+	 */
+	(void) ext4_find_inline_data_nolock(inode);
+
 	kaddr = kmap_atomic(page);
 	ext4_write_inline_data(inode, &iloc, kaddr, pos, len);
 	kunmap_atomic(kaddr);

[PATCH 5.4 02/37] fscrypt: add fscrypt_symlink_getattr() for computing st_size

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit d18760560593e5af921f51a8c9b64b6109d634c2 upstream.

Add a helper function fscrypt_symlink_getattr() which will be called
from the various filesystems' ->getattr() methods to read and decrypt
the target of encrypted symlinks in order to report the correct st_size.

Detailed explanation:

As required by POSIX and as documented in various man pages, st_size for
a symlink is supposed to be the length of the symlink target.
Unfortunately, st_size has always been wrong for encrypted symlinks
because st_size is populated from i_size from disk, which intentionally
contains the length of the encrypted symlink target.  That's slightly
greater than the length of the decrypted symlink target (which is the
symlink target that userspace usually sees), and usually won't match the
length of the no-key encoded symlink target either.

This hadn't been fixed yet because reporting the correct st_size would
require reading the symlink target from disk and decrypting or encoding
it, which historically has been considered too heavyweight to do in
->getattr().  Also historically, the wrong st_size had only broken a
test (LTP lstat03) and there were no known complaints from real users.
(This is probably because the st_size of symlinks isn't used too often,
and when it is, typically it's for a hint for what buffer size to pass
to readlink() -- which a slightly-too-large size still works for.)

However, a couple things have changed now.  First, there have recently
been complaints about the current behavior from real users:

- Breakage in rpmbuild:
  https://github.com/rpm-software-management/rpm/issues/1682
  https://github.com/google/fscrypt/issues/305

- Breakage in toybox cpio:
  https://www.mail-archive.com/toybox@lists.landley.net/msg07193.html

- Breakage in libgit2: https://issuetracker.google.com/issues/189629152
  (on Android public issue tracker, requires login)

Second, we now cache decrypted symlink targets in ->i_link.  Therefore,
taking the performance hit of reading and decrypting the symlink target
in ->getattr() wouldn't be as big a deal as it used to be, since usually
it will just save having to do the same thing later.

Also note that eCryptfs ended up having to read and decrypt symlink
targets in ->getattr() as well, to fix this same issue; see
commit 3a60a1686f0d ("eCryptfs: Decrypt symlink target for stat size").

So, let's just bite the bullet, and read and decrypt the symlink target
in ->getattr() in order to report the correct st_size.  Add a function
fscrypt_symlink_getattr() which the filesystems will call to do this.

(Alternatively, we could store the decrypted size of symlinks on-disk.
But there isn't a great place to do so, and encryption is meant to hide
the original size to some extent; that property would be lost.)

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/crypto/hooks.c       |   44 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/fscrypt.h |    7 +++++++
 2 files changed, 51 insertions(+)

--- a/fs/crypto/hooks.c
+++ b/fs/crypto/hooks.c
@@ -305,3 +305,47 @@ err_kfree:
 	return ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(fscrypt_get_symlink);
+
+/**
+ * fscrypt_symlink_getattr() - set the correct st_size for encrypted symlinks
+ * @path: the path for the encrypted symlink being queried
+ * @stat: the struct being filled with the symlink's attributes
+ *
+ * Override st_size of encrypted symlinks to be the length of the decrypted
+ * symlink target (or the no-key encoded symlink target, if the key is
+ * unavailable) rather than the length of the encrypted symlink target.  This is
+ * necessary for st_size to match the symlink target that userspace actually
+ * sees.  POSIX requires this, and some userspace programs depend on it.
+ *
+ * This requires reading the symlink target from disk if needed, setting up the
+ * inode's encryption key if possible, and then decrypting or encoding the
+ * symlink target.  This makes lstat() more heavyweight than is normally the
+ * case.  However, decrypted symlink targets will be cached in ->i_link, so
+ * usually the symlink won't have to be read and decrypted again later if/when
+ * it is actually followed, readlink() is called, or lstat() is called again.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+int fscrypt_symlink_getattr(const struct path *path, struct kstat *stat)
+{
+	struct dentry *dentry = path->dentry;
+	struct inode *inode = d_inode(dentry);
+	const char *link;
+	DEFINE_DELAYED_CALL(done);
+
+	/*
+	 * To get the symlink target that userspace will see (whether it's the
+	 * decrypted target or the no-key encoded target), we can just get it in
+	 * the same way the VFS does during path resolution and readlink().
+	 */
+	link = READ_ONCE(inode->i_link);
+	if (!link) {
+		link = inode->i_op->get_link(dentry, inode, &done);
+		if (IS_ERR(link))
+			return PTR_ERR(link);
+	}
+	stat->size = strlen(link);
+	do_delayed_call(&done);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fscrypt_symlink_getattr);
--- a/include/linux/fscrypt.h
+++ b/include/linux/fscrypt.h
@@ -298,6 +298,7 @@ extern int __fscrypt_encrypt_symlink(str
 extern const char *fscrypt_get_symlink(struct inode *inode, const void *caddr,
 				       unsigned int max_size,
 				       struct delayed_call *done);
+int fscrypt_symlink_getattr(const struct path *path, struct kstat *stat);
 static inline void fscrypt_set_ops(struct super_block *sb,
 				   const struct fscrypt_operations *s_cop)
 {
@@ -585,6 +586,12 @@ static inline const char *fscrypt_get_sy
 	return ERR_PTR(-EOPNOTSUPP);
 }
 
+static inline int fscrypt_symlink_getattr(const struct path *path,
+					  struct kstat *stat)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline void fscrypt_set_ops(struct super_block *sb,
 				   const struct fscrypt_operations *s_cop)
 {

[PATCH 5.4 03/37] ext4: report correct st_size for encrypted symlinks

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 8c4bca10ceafc43b1ca0a9fab5fa27e13cbce99e upstream.

The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after ext4_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: f348c252320b ("ext4 crypto: add symlink encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/symlink.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/fs/ext4/symlink.c
+++ b/fs/ext4/symlink.c
@@ -52,10 +52,19 @@ static const char *ext4_encrypted_get_li
 	return paddr;
 }
 
+static int ext4_encrypted_symlink_getattr(const struct path *path,
+					  struct kstat *stat, u32 request_mask,
+					  unsigned int query_flags)
+{
+	ext4_getattr(path, stat, request_mask, query_flags);
+
+	return fscrypt_symlink_getattr(path, stat);
+}
+
 const struct inode_operations ext4_encrypted_symlink_inode_operations = {
 	.get_link	= ext4_encrypted_get_link,
 	.setattr	= ext4_setattr,
-	.getattr	= ext4_getattr,
+	.getattr	= ext4_encrypted_symlink_getattr,
 	.listxattr	= ext4_listxattr,
 };
 

[PATCH 5.4 04/37] f2fs: report correct st_size for encrypted symlinks

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 461b43a8f92e68e96c4424b31e15f2b35f1bbfa9 upstream.

The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after f2fs_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: cbaf042a3cc6 ("f2fs crypto: add symlink encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/f2fs/namei.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -1256,9 +1256,18 @@ static const char *f2fs_encrypted_get_li
 	return target;
 }
 
+static int f2fs_encrypted_symlink_getattr(const struct path *path,
+					  struct kstat *stat, u32 request_mask,
+					  unsigned int query_flags)
+{
+	f2fs_getattr(path, stat, request_mask, query_flags);
+
+	return fscrypt_symlink_getattr(path, stat);
+}
+
 const struct inode_operations f2fs_encrypted_symlink_inode_operations = {
 	.get_link       = f2fs_encrypted_get_link,
-	.getattr	= f2fs_getattr,
+	.getattr	= f2fs_encrypted_symlink_getattr,
 	.setattr	= f2fs_setattr,
 #ifdef CONFIG_F2FS_FS_XATTR
 	.listxattr	= f2fs_listxattr,

[PATCH 5.4 05/37] ubifs: report correct st_size for encrypted symlinks

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 064c734986011390b4d111f1a99372b7f26c3850 upstream.

The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after ubifs_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: ca7f85be8d6c ("ubifs: Add support for encrypted symlinks")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ubifs/file.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -1629,6 +1629,16 @@ static const char *ubifs_get_link(struct
 	return fscrypt_get_symlink(inode, ui->data, ui->data_len, done);
 }
 
+static int ubifs_symlink_getattr(const struct path *path, struct kstat *stat,
+				 u32 request_mask, unsigned int query_flags)
+{
+	ubifs_getattr(path, stat, request_mask, query_flags);
+
+	if (IS_ENCRYPTED(d_inode(path->dentry)))
+		return fscrypt_symlink_getattr(path, stat);
+	return 0;
+}
+
 const struct address_space_operations ubifs_file_address_operations = {
 	.readpage       = ubifs_readpage,
 	.writepage      = ubifs_writepage,
@@ -1654,7 +1664,7 @@ const struct inode_operations ubifs_file
 const struct inode_operations ubifs_symlink_inode_operations = {
 	.get_link    = ubifs_get_link,
 	.setattr     = ubifs_setattr,
-	.getattr     = ubifs_getattr,
+	.getattr     = ubifs_symlink_getattr,
 #ifdef CONFIG_UBIFS_FS_XATTR
 	.listxattr   = ubifs_listxattr,
 #endif

[PATCH 5.4 06/37] kthread: Fix PF_KTHREAD vs to_kthread() race

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

commit 3a7956e25e1d7b3c148569e78895e1f3178122a9 upstream.

The kthread_is_per_cpu() construct relies on only being called on
PF_KTHREAD tasks (per the WARN in to_kthread). This gives rise to the
following usage pattern:

	if ((p->flags & PF_KTHREAD) && kthread_is_per_cpu(p))

However, as reported by syzcaller, this is broken. The scenario is:

	CPU0				CPU1 (running p)

	(p->flags & PF_KTHREAD) // true

					begin_new_exec()
					  me->flags &= ~(PF_KTHREAD|...);
	kthread_is_per_cpu(p)
	  to_kthread(p)
	    WARN(!(p->flags & PF_KTHREAD) <-- *SPLAT*

Introduce __to_kthread() that omits the WARN and is sure to check both
values.

Use this to remove the problematic pattern for kthread_is_per_cpu()
and fix a number of other kthread_*() functions that have similar
issues but are currently not used in ways that would expose the
problem.

Notably kthread_func() is only ever called on 'current', while
kthread_probe_data() is only used for PF_WQ_WORKER, which implies the
task is from kthread_create*().

Fixes: ac687e6e8c26 ("kthread: Extract KTHREAD_IS_PER_CPU")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Link: https://lkml.kernel.org/r/YH6WJc825C4P0FCK@hirez.programming.kicks-ass.net
Signed-off-by: Patrick Schaaf <bof@bof.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/kthread.c    |   43 +++++++++++++++++++++++++++++--------------
 kernel/sched/fair.c |    2 +-
 2 files changed, 30 insertions(+), 15 deletions(-)

--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -76,6 +76,25 @@ static inline struct kthread *to_kthread
 	return (__force void *)k->set_child_tid;
 }
 
+/*
+ * Variant of to_kthread() that doesn't assume @p is a kthread.
+ *
+ * Per construction; when:
+ *
+ *   (p->flags & PF_KTHREAD) && p->set_child_tid
+ *
+ * the task is both a kthread and struct kthread is persistent. However
+ * PF_KTHREAD on it's own is not, kernel_thread() can exec() (See umh.c and
+ * begin_new_exec()).
+ */
+static inline struct kthread *__to_kthread(struct task_struct *p)
+{
+	void *kthread = (__force void *)p->set_child_tid;
+	if (kthread && !(p->flags & PF_KTHREAD))
+		kthread = NULL;
+	return kthread;
+}
+
 void free_kthread_struct(struct task_struct *k)
 {
 	struct kthread *kthread;
@@ -176,10 +195,11 @@ void *kthread_data(struct task_struct *t
  */
 void *kthread_probe_data(struct task_struct *task)
 {
-	struct kthread *kthread = to_kthread(task);
+	struct kthread *kthread = __to_kthread(task);
 	void *data = NULL;
 
-	probe_kernel_read(&data, &kthread->data, sizeof(data));
+	if (kthread)
+		probe_kernel_read(&data, &kthread->data, sizeof(data));
 	return data;
 }
 
@@ -490,9 +510,9 @@ void kthread_set_per_cpu(struct task_str
 	set_bit(KTHREAD_IS_PER_CPU, &kthread->flags);
 }
 
-bool kthread_is_per_cpu(struct task_struct *k)
+bool kthread_is_per_cpu(struct task_struct *p)
 {
-	struct kthread *kthread = to_kthread(k);
+	struct kthread *kthread = __to_kthread(p);
 	if (!kthread)
 		return false;
 
@@ -1272,11 +1292,9 @@ EXPORT_SYMBOL(kthread_destroy_worker);
  */
 void kthread_associate_blkcg(struct cgroup_subsys_state *css)
 {
-	struct kthread *kthread;
+	struct kthread *kthread = __to_kthread(current);
+
 
-	if (!(current->flags & PF_KTHREAD))
-		return;
-	kthread = to_kthread(current);
 	if (!kthread)
 		return;
 
@@ -1298,13 +1316,10 @@ EXPORT_SYMBOL(kthread_associate_blkcg);
  */
 struct cgroup_subsys_state *kthread_blkcg(void)
 {
-	struct kthread *kthread;
+	struct kthread *kthread = __to_kthread(current);
 
-	if (current->flags & PF_KTHREAD) {
-		kthread = to_kthread(current);
-		if (kthread)
-			return kthread->blkcg_css;
-	}
+	if (kthread)
+		return kthread->blkcg_css;
 	return NULL;
 }
 EXPORT_SYMBOL(kthread_blkcg);
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -7301,7 +7301,7 @@ int can_migrate_task(struct task_struct
 		return 0;
 
 	/* Disregard pcpu kthreads; they are where they need to be. */
-	if ((p->flags & PF_KTHREAD) && kthread_is_per_cpu(p))
+	if (kthread_is_per_cpu(p))
 		return 0;
 
 	if (!cpumask_test_cpu(env->dst_cpu, p->cpus_ptr)) {

[PATCH 5.4 07/37] xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit ed5aacc81cd41efc4d561e14af408d1003f7b855 upstream.

XTENSA should only select HAVE_FUTEX_CMPXCHG when FUTEX is
set/enabled. This prevents a kconfig warning.

WARNING: unmet direct dependencies detected for HAVE_FUTEX_CMPXCHG
  Depends on [n]: FUTEX [=n]
  Selected by [y]:
  - XTENSA [=y] && !MMU [=n]

Fixes: d951ba21b959 ("xtensa: nommu: select HAVE_FUTEX_CMPXCHG")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Message-Id: <20210526070337.28130-1-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/xtensa/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -27,7 +27,7 @@ config XTENSA
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_EXIT_THREAD
 	select HAVE_FUNCTION_TRACER
-	select HAVE_FUTEX_CMPXCHG if !MMU
+	select HAVE_FUTEX_CMPXCHG if !MMU && FUTEX
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_OPROFILE

[PATCH 5.4 08/37] gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats

[Greg Kroah-Hartman]

From: Krzysztof Hałasa <khalasa@piap.pl>

[ Upstream commit 7cca7c8096e2c8a4149405438329b5035d0744f0 ]

Video captured in 1400x1050 resolution (bytesperline aka stride = 1408
bytes) is invalid. Fix it.

Signed-off-by: Krzysztof Halasa <khalasa@piap.pl>
Link: https://lore.kernel.org/r/m3y2bmq7a4.fsf@t19.piap.pl
[p.zabel@pengutronix.de: added "gpu: ipu-v3:" prefix to commit description]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/ipu-v3/ipu-cpmem.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-cpmem.c b/drivers/gpu/ipu-v3/ipu-cpmem.c
index a1c85d1521f5..82b244cb313e 100644
--- a/drivers/gpu/ipu-v3/ipu-cpmem.c
+++ b/drivers/gpu/ipu-v3/ipu-cpmem.c
@@ -585,21 +585,21 @@ static const struct ipu_rgb def_bgra_16 = {
 	.bits_per_pixel = 16,
 };
 
-#define Y_OFFSET(pix, x, y)	((x) + pix->width * (y))
-#define U_OFFSET(pix, x, y)	((pix->width * pix->height) +		\
-				 (pix->width * ((y) / 2) / 2) + (x) / 2)
-#define V_OFFSET(pix, x, y)	((pix->width * pix->height) +		\
-				 (pix->width * pix->height / 4) +	\
-				 (pix->width * ((y) / 2) / 2) + (x) / 2)
-#define U2_OFFSET(pix, x, y)	((pix->width * pix->height) +		\
-				 (pix->width * (y) / 2) + (x) / 2)
-#define V2_OFFSET(pix, x, y)	((pix->width * pix->height) +		\
-				 (pix->width * pix->height / 2) +	\
-				 (pix->width * (y) / 2) + (x) / 2)
-#define UV_OFFSET(pix, x, y)	((pix->width * pix->height) +	\
-				 (pix->width * ((y) / 2)) + (x))
-#define UV2_OFFSET(pix, x, y)	((pix->width * pix->height) +	\
-				 (pix->width * y) + (x))
+#define Y_OFFSET(pix, x, y)	((x) + pix->bytesperline * (y))
+#define U_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * ((y) / 2) / 2) + (x) / 2)
+#define V_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * pix->height / 4) + \
+				 (pix->bytesperline * ((y) / 2) / 2) + (x) / 2)
+#define U2_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * (y) / 2) + (x) / 2)
+#define V2_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * pix->height / 2) + \
+				 (pix->bytesperline * (y) / 2) + (x) / 2)
+#define UV_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * ((y) / 2)) + (x))
+#define UV2_OFFSET(pix, x, y)	((pix->bytesperline * pix->height) +	 \
+				 (pix->bytesperline * y) + (x))
 
 #define NUM_ALPHA_CHANNELS	7
 
-- 
2.30.2

[PATCH 5.4 09/37] reset: reset-zynqmp: Fixed the argument data type

[Greg Kroah-Hartman]

From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>

[ Upstream commit ed104ca4bd9c405b41e968ad4ece51f6462e90b6 ]

This patch changes the data type of the variable 'val' from
int to u32.

Addresses-Coverity: argument of type "int *" is incompatible with parameter of type "u32 *"
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/925cebbe4eb73c7d0a536da204748d33c7100d8c.1624448778.git.michal.simek@xilinx.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/reset-zynqmp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c
index 99e75d92dada..8a7473b6ba58 100644
--- a/drivers/reset/reset-zynqmp.c
+++ b/drivers/reset/reset-zynqmp.c
@@ -46,7 +46,8 @@ static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
 			       unsigned long id)
 {
 	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
-	int val, err;
+	int err;
+	u32 val;
 
 	err = priv->eemi_ops->reset_get_status(ZYNQMP_RESET_ID + id, &val);
 	if (err)
-- 
2.30.2

[PATCH 5.4 10/37] qed: Fix the VF msix vectors flow

[Greg Kroah-Hartman]

From: Shai Malin <smalin@marvell.com>

[ Upstream commit b0cd08537db8d2fbb227cdb2e5835209db295a24 ]

For VFs we should return with an error in case we didn't get the exact
number of msix vectors as we requested.
Not doing that will lead to a crash when starting queues for this VF.

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index bc1f5b36b5bf..1db49424aa43 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -559,7 +559,12 @@ static int qed_enable_msix(struct qed_dev *cdev,
 			rc = cnt;
 	}
 
-	if (rc > 0) {
+	/* For VFs, we should return with an error in case we didn't get the
+	 * exact number of msix vectors as we requested.
+	 * Not doing that will lead to a crash when starting queues for
+	 * this VF.
+	 */
+	if ((IS_PF(cdev) && rc > 0) || (IS_VF(cdev) && rc == cnt)) {
 		/* MSI-x configuration was achieved */
 		int_params->out.int_mode = QED_INT_MODE_MSIX;
 		int_params->out.num_vectors = rc;
-- 
2.30.2

[PATCH 5.4 11/37] net: macb: Add a NULL check on desc_ptp

[Greg Kroah-Hartman]

From: Harini Katakam <harini.katakam@xilinx.com>

[ Upstream commit 85520079afce885b80647fbd0d13d8f03d057167 ]

macb_ptp_desc will not return NULL under most circumstances with correct
Kconfig and IP design config register. But for the sake of the extreme
corner case, check for NULL when using the helper. In case of rx_tstamp,
no action is necessary except to return (similar to timestamp disabled)
and warn. In case of TX, return -EINVAL to let the skb be free. Perform
this check before marking skb in progress.
Fixes coverity warning:
(4) Event dereference:
Dereferencing a null pointer "desc_ptp"

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_ptp.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_ptp.c b/drivers/net/ethernet/cadence/macb_ptp.c
index 43a3f0dbf857..f5aec28c7730 100644
--- a/drivers/net/ethernet/cadence/macb_ptp.c
+++ b/drivers/net/ethernet/cadence/macb_ptp.c
@@ -275,6 +275,12 @@ void gem_ptp_rxstamp(struct macb *bp, struct sk_buff *skb,
 
 	if (GEM_BFEXT(DMA_RXVALID, desc->addr)) {
 		desc_ptp = macb_ptp_desc(bp, desc);
+		/* Unlikely but check */
+		if (!desc_ptp) {
+			dev_warn_ratelimited(&bp->pdev->dev,
+					     "Timestamp not supported in BD\n");
+			return;
+		}
 		gem_hw_timestamp(bp, desc_ptp->ts_1, desc_ptp->ts_2, &ts);
 		memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
 		shhwtstamps->hwtstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
@@ -307,8 +313,11 @@ int gem_ptp_txstamp(struct macb_queue *queue, struct sk_buff *skb,
 	if (CIRC_SPACE(head, tail, PTP_TS_BUFFER_SIZE) == 0)
 		return -ENOMEM;
 
-	skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 	desc_ptp = macb_ptp_desc(queue->bp, desc);
+	/* Unlikely but check */
+	if (!desc_ptp)
+		return -EINVAL;
+	skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 	tx_timestamp = &queue->tx_timestamps[head];
 	tx_timestamp->skb = skb;
 	/* ensure ts_1/ts_2 is loaded after ctrl (TX_USED check) */
-- 
2.30.2

[PATCH 5.4 12/37] qede: Fix memset corruption

[Greg Kroah-Hartman]

From: Shai Malin <smalin@marvell.com>

[ Upstream commit e543468869e2532f5d7926e8f417782b48eca3dc ]

Thanks to Kees Cook who detected the problem of memset that starting
from not the first member, but sized for the whole struct.
The better change will be to remove the redundant memset and to clear
only the msix_cnt member.

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index ce3e62e73e4c..1133f6fe21a0 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1773,6 +1773,7 @@ static void qede_sync_free_irqs(struct qede_dev *edev)
 	}
 
 	edev->int_info.used_cnt = 0;
+	edev->int_info.msix_cnt = 0;
 }
 
 static int qede_req_msix_irqs(struct qede_dev *edev)
@@ -2317,7 +2318,6 @@ static int qede_load(struct qede_dev *edev, enum qede_load_mode mode,
 	goto out;
 err4:
 	qede_sync_free_irqs(edev);
-	memset(&edev->int_info.msix_cnt, 0, sizeof(struct qed_int_info));
 err3:
 	qede_napi_disable_remove(edev);
 err2:
-- 
2.30.2

[PATCH 5.4 13/37] perf/x86/intel/pt: Fix mask of num_address_ranges

[Greg Kroah-Hartman]

From: Xiaoyao Li <xiaoyao.li@intel.com>

[ Upstream commit c53c6b7409f4cd9e542991b53d597fbe2751d7db ]

Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of
configurable address ranges for filtering, not bit 1:0.

Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20210824040622.4081502-1-xiaoyao.li@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/pt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 05e43d0f430b..da289a44d511 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -62,7 +62,7 @@ static struct pt_cap_desc {
 	PT_CAP(single_range_output,	0, CPUID_ECX, BIT(2)),
 	PT_CAP(output_subsys,		0, CPUID_ECX, BIT(3)),
 	PT_CAP(payloads_lip,		0, CPUID_ECX, BIT(31)),
-	PT_CAP(num_address_ranges,	1, CPUID_EAX, 0x3),
+	PT_CAP(num_address_ranges,	1, CPUID_EAX, 0x7),
 	PT_CAP(mtc_periods,		1, CPUID_EAX, 0xffff0000),
 	PT_CAP(cycle_thresholds,	1, CPUID_EBX, 0xffff),
 	PT_CAP(psb_periods,		1, CPUID_EBX, 0xffff0000),
-- 
2.30.2

[PATCH 5.4 14/37] perf/x86/amd/ibs: Work around erratum #1197

[Greg Kroah-Hartman]

From: Kim Phillips <kim.phillips@amd.com>

[ Upstream commit 26db2e0c51fe83e1dd852c1321407835b481806e ]

Erratum #1197 "IBS (Instruction Based Sampling) Register State May be
Incorrect After Restore From CC6" is published in a document:

  "Revision Guide for AMD Family 19h Models 00h-0Fh Processors" 56683 Rev. 1.04 July 2021

  https://bugzilla.kernel.org/show_bug.cgi?id=206537

Implement the erratum's suggested workaround and ignore IBS samples if
MSRC001_1031 == 0.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210817221048.88063-3-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/amd/ibs.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 39169885adfa..ff07040287c4 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -90,6 +90,7 @@ struct perf_ibs {
 	unsigned long			offset_mask[1];
 	int				offset_max;
 	unsigned int			fetch_count_reset_broken : 1;
+	unsigned int			fetch_ignore_if_zero_rip : 1;
 	struct cpu_perf_ibs __percpu	*pcpu;
 
 	struct attribute		**format_attrs;
@@ -663,6 +664,10 @@ fail:
 	if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) {
 		regs.flags &= ~PERF_EFLAGS_EXACT;
 	} else {
+		/* Workaround for erratum #1197 */
+		if (perf_ibs->fetch_ignore_if_zero_rip && !(ibs_data.regs[1]))
+			goto out;
+
 		set_linear_ip(&regs, ibs_data.regs[1]);
 		regs.flags |= PERF_EFLAGS_EXACT;
 	}
@@ -756,6 +761,9 @@ static __init void perf_event_ibs_init(void)
 	if (boot_cpu_data.x86 >= 0x16 && boot_cpu_data.x86 <= 0x18)
 		perf_ibs_fetch.fetch_count_reset_broken = 1;
 
+	if (boot_cpu_data.x86 == 0x19 && boot_cpu_data.x86_model < 0x10)
+		perf_ibs_fetch.fetch_ignore_if_zero_rip = 1;
+
 	perf_ibs_pmu_init(&perf_ibs_fetch, "ibs_fetch");
 
 	if (ibs_caps & IBS_CAPS_OPCNT) {
-- 
2.30.2

[PATCH 5.4 15/37] perf/x86/amd/power: Assign pmu.module

[Greg Kroah-Hartman]

From: Kim Phillips <kim.phillips@amd.com>

[ Upstream commit ccf26483416a339c114409f6e7cd02abdeaf8052 ]

Assign pmu.module so the driver can't be unloaded whilst in use.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210817221048.88063-4-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/amd/power.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/events/amd/power.c b/arch/x86/events/amd/power.c
index abef51320e3a..c4892b7d0c36 100644
--- a/arch/x86/events/amd/power.c
+++ b/arch/x86/events/amd/power.c
@@ -217,6 +217,7 @@ static struct pmu pmu_class = {
 	.stop		= pmu_event_stop,
 	.read		= pmu_event_read,
 	.capabilities	= PERF_PMU_CAP_NO_EXCLUDE,
+	.module		= THIS_MODULE,
 };
 
 static int power_cpu_exit(unsigned int cpu)
-- 
2.30.2

[PATCH 5.4 16/37] cryptoloop: add a deprecation warning

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 222013f9ac30b9cec44301daa8dbd0aae38abffb ]

Support for cryptoloop has been officially marked broken and deprecated
in favor of dm-crypt (which supports the same broken algorithms if
needed) in Linux 2.6.4 (released in March 2004), and support for it has
been entirely removed from losetup in util-linux 2.23 (released in April
2013).  Add a warning and a deprecation schedule.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210827163250.255325-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/Kconfig      | 4 ++--
 drivers/block/cryptoloop.c | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 0fc27ac14f29..9f6782329a23 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -230,7 +230,7 @@ config BLK_DEV_LOOP_MIN_COUNT
 	  dynamically allocated with the /dev/loop-control interface.
 
 config BLK_DEV_CRYPTOLOOP
-	tristate "Cryptoloop Support"
+	tristate "Cryptoloop Support (DEPRECATED)"
 	select CRYPTO
 	select CRYPTO_CBC
 	depends on BLK_DEV_LOOP
@@ -242,7 +242,7 @@ config BLK_DEV_CRYPTOLOOP
 	  WARNING: This device is not safe for journaled file systems like
 	  ext3 or Reiserfs. Please use the Device Mapper crypto module
 	  instead, which can be configured to be on-disk compatible with the
-	  cryptoloop device.
+	  cryptoloop device.  cryptoloop support will be removed in Linux 5.16.
 
 source "drivers/block/drbd/Kconfig"
 
diff --git a/drivers/block/cryptoloop.c b/drivers/block/cryptoloop.c
index 3cabc335ae74..f0a91faa43a8 100644
--- a/drivers/block/cryptoloop.c
+++ b/drivers/block/cryptoloop.c
@@ -189,6 +189,8 @@ init_cryptoloop(void)
 
 	if (rc)
 		printk(KERN_ERR "cryptoloop: loop_register_transfer failed\n");
+	else
+		pr_warn("the cryptoloop driver has been deprecated and will be removed in in Linux 5.16\n");
 	return rc;
 }
 
-- 
2.30.2

[PATCH 5.4 17/37] ARM: 8918/2: only build return_address() if needed

[Greg Kroah-Hartman]

From: Ben Dooks <ben-linux@fluff.org>

commit fb033c95c94ca1ee3d16e04ebdb85d65fb55fff8 upstream.

The system currently warns if the config conditions for
building return_address in arch/arm/kernel/return_address.c
are not met, leaving just an EXPORT_SYMBOL_GPL(return_address)
of a function defined to be 'static linline'.
This is a result of aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h").

Since we're not going to build anything other than an exported
symbol for something that is already being defined to be an
inline-able return of NULL, just avoid building the code to
remove the following warning:

Fixes: aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/kernel/Makefile         |    6 +++++-
 arch/arm/kernel/return_address.c |    4 ----
 2 files changed, 5 insertions(+), 5 deletions(-)

--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,10 +17,14 @@ CFLAGS_REMOVE_return_address.o = -pg
 # Object file lists.
 
 obj-y		:= elf.o entry-common.o irq.o opcodes.o \
-		   process.o ptrace.o reboot.o return_address.o \
+		   process.o ptrace.o reboot.o \
 		   setup.o signal.o sigreturn_codes.o \
 		   stacktrace.o sys_arm.o time.o traps.o
 
+ifneq ($(CONFIG_ARM_UNWIND),y)
+obj-$(CONFIG_FRAME_POINTER)	+= return_address.o
+endif
+
 obj-$(CONFIG_ATAGS)		+= atags_parse.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags_proc.o
 obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o
--- a/arch/arm/kernel/return_address.c
+++ b/arch/arm/kernel/return_address.c
@@ -7,8 +7,6 @@
  */
 #include <linux/export.h>
 #include <linux/ftrace.h>
-
-#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
 #include <linux/sched.h>
 
 #include <asm/stacktrace.h>
@@ -53,6 +51,4 @@ void *return_address(unsigned int level)
 		return NULL;
 }
 
-#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
-
 EXPORT_SYMBOL_GPL(return_address);

[PATCH 5.4 18/37] ALSA: hda/realtek: Workaround for conflicting SSID on ASUS ROG Strix G17

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 13d9c6b998aaa76fd098133277a28a21f2cc2264 upstream.

ASUS ROG Strix G17 has the very same PCI and codec SSID (1043:103f) as
ASUS TX300, and unfortunately, the existing quirk for TX300 is broken
on ASUS ROG.  Actually the device works without the quirk, so we'll
need to clear the quirk before applying for this device.
Since ASUS ROG has a different codec (ALC294 - while TX300 has
ALC282), this patch adds a workaround for the device, just clearing
the codec->fixup_id by checking the codec vendor_id.

It's a bit ugly to add such a workaround there, but it seems to be the
simplest way.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214101
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210820143214.3654-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9160,6 +9160,16 @@ static int patch_alc269(struct hda_codec
 
 	snd_hda_pick_fixup(codec, alc269_fixup_models,
 		       alc269_fixup_tbl, alc269_fixups);
+	/* FIXME: both TX300 and ROG Strix G17 have the same SSID, and
+	 * the quirk breaks the latter (bko#214101).
+	 * Clear the wrong entry.
+	 */
+	if (codec->fixup_id == ALC282_FIXUP_ASUS_TX300 &&
+	    codec->core.vendor_id == 0x10ec0294) {
+		codec_dbg(codec, "Clear wrong fixup for ASUS ROG Strix G17\n");
+		codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
+	}
+
 	snd_hda_pick_pin_fixup(codec, alc269_pin_fixup_tbl, alc269_fixups, true);
 	snd_hda_pick_pin_fixup(codec, alc269_fallback_pin_fixup_tbl, alc269_fixups, false);
 	snd_hda_pick_fixup(codec, NULL,	alc269_fixup_vendor_tbl,

[PATCH 5.4 19/37] ALSA: pcm: fix divide error in snd_pcm_lib_ioctl

[Greg Kroah-Hartman]

From: Zubin Mithra <zsm@chromium.org>

commit f3eef46f0518a2b32ca1244015820c35a22cfe4a upstream.

Syzkaller reported a divide error in snd_pcm_lib_ioctl. fifo_size
is of type snd_pcm_uframes_t(unsigned long). If frame_size
is 0x100000000, the error occurs.

Fixes: a9960e6a293e ("ALSA: pcm: fix fifo_size frame calculation")
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210827153735.789452-1-zsm@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/pcm_lib.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1736,7 +1736,7 @@ static int snd_pcm_lib_ioctl_fifo_size(s
 		channels = params_channels(params);
 		frame_size = snd_pcm_format_size(format, channels);
 		if (frame_size > 0)
-			params->fifo_size /= (unsigned)frame_size;
+			params->fifo_size /= frame_size;
 	}
 	return 0;
 }

[PATCH 5.4 20/37] ARC: wireup clone3 syscall

[Greg Kroah-Hartman]

From: Vineet Gupta <vgupta@synopsys.com>

commit bd71c453db91ecb464405411f2821d040f2a0d44 upstream.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arc/Kconfig                   |    1 +
 arch/arc/include/asm/syscalls.h    |    1 +
 arch/arc/include/uapi/asm/unistd.h |    1 +
 arch/arc/kernel/entry.S            |   12 ++++++++++++
 arch/arc/kernel/process.c          |    7 +++----
 arch/arc/kernel/sys.c              |    1 +
 6 files changed, 19 insertions(+), 4 deletions(-)

--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -29,6 +29,7 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_IOREMAP_PROT
--- a/arch/arc/include/asm/syscalls.h
+++ b/arch/arc/include/asm/syscalls.h
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 
 int sys_clone_wrapper(int, int, int, int, int);
+int sys_clone3_wrapper(void *, size_t);
 int sys_cacheflush(uint32_t, uint32_t uint32_t);
 int sys_arc_settls(void *);
 int sys_arc_gettls(void);
--- a/arch/arc/include/uapi/asm/unistd.h
+++ b/arch/arc/include/uapi/asm/unistd.h
@@ -21,6 +21,7 @@
 #define __ARCH_WANT_SET_GET_RLIMIT
 #define __ARCH_WANT_SYS_EXECVE
 #define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_CLONE3
 #define __ARCH_WANT_SYS_VFORK
 #define __ARCH_WANT_SYS_FORK
 #define __ARCH_WANT_TIME32_SYSCALLS
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -35,6 +35,18 @@ ENTRY(sys_clone_wrapper)
 	b .Lret_from_system_call
 END(sys_clone_wrapper)
 
+ENTRY(sys_clone3_wrapper)
+	SAVE_CALLEE_SAVED_USER
+	bl  @sys_clone3
+	DISCARD_CALLEE_SAVED_USER
+
+	GET_CURR_THR_INFO_FLAGS   r10
+	btst r10, TIF_SYSCALL_TRACE
+	bnz  tracesys_exit
+
+	b .Lret_from_system_call
+END(sys_clone3_wrapper)
+
 ENTRY(ret_from_fork)
 	; when the forked child comes here from the __switch_to function
 	; r0 has the last task pointer.
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -171,9 +171,8 @@ asmlinkage void ret_from_fork(void);
  * |    user_r25    |
  * ------------------  <===== END of PAGE
  */
-int copy_thread(unsigned long clone_flags,
-		unsigned long usp, unsigned long kthread_arg,
-		struct task_struct *p)
+int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
+	unsigned long kthread_arg, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *c_regs;        /* child's pt_regs */
 	unsigned long *childksp;       /* to unwind out of __switch_to() */
@@ -231,7 +230,7 @@ int copy_thread(unsigned long clone_flag
 		 * set task's userland tls data ptr from 4th arg
 		 * clone C-lib call is difft from clone sys-call
 		 */
-		task_thread_info(p)->thr_ptr = regs->r3;
+		task_thread_info(p)->thr_ptr = tls;
 	} else {
 		/* Normal fork case: set parent's TLS ptr in child */
 		task_thread_info(p)->thr_ptr =
--- a/arch/arc/kernel/sys.c
+++ b/arch/arc/kernel/sys.c
@@ -7,6 +7,7 @@
 #include <asm/syscalls.h>
 
 #define sys_clone	sys_clone_wrapper
+#define sys_clone3	sys_clone3_wrapper
 
 #undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),

[PATCH 5.4 21/37] media: stkwebcam: fix memory leak in stk_camera_probe

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit 514e97674400462cc09c459a1ddfb9bf39017223 upstream.

My local syzbot instance hit memory leak in usb_set_configuration().
The problem was in unputted usb interface. In case of errors after
usb_get_intf() the reference should be putted to correclty free memory
allocated for this interface.

Fixes: ec16dae5453e ("V4L/DVB (7019): V4L: add support for Syntek DC1125 webcams")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/stkwebcam/stk-webcam.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -1346,7 +1346,7 @@ static int stk_camera_probe(struct usb_i
 	if (!dev->isoc_ep) {
 		pr_err("Could not find isoc-in endpoint\n");
 		err = -ENODEV;
-		goto error;
+		goto error_put;
 	}
 	dev->vsettings.palette = V4L2_PIX_FMT_RGB565;
 	dev->vsettings.mode = MODE_VGA;
@@ -1359,10 +1359,12 @@ static int stk_camera_probe(struct usb_i
 
 	err = stk_register_video_device(dev);
 	if (err)
-		goto error;
+		goto error_put;
 
 	return 0;
 
+error_put:
+	usb_put_intf(interface);
 error:
 	v4l2_ctrl_handler_free(hdl);
 	v4l2_device_unregister(&dev->v4l2_dev);

[PATCH 5.4 22/37] igmp: Add ip_mc_list lock in ip_check_mc_rcu

[Greg Kroah-Hartman]

From: Liu Jian <liujian56@huawei.com>

commit 23d2b94043ca8835bd1e67749020e839f396a1c2 upstream.

I got below panic when doing fuzz test:

Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 4056 Comm: syz-executor.3 Tainted: G    B             5.14.0-rc1-00195-gcff5c4254439-dirty #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x7a/0x9b
panic+0x2cd/0x5af
end_report.cold+0x5a/0x5a
kasan_report+0xec/0x110
ip_check_mc_rcu+0x556/0x5d0
__mkroute_output+0x895/0x1740
ip_route_output_key_hash_rcu+0x2d0/0x1050
ip_route_output_key_hash+0x182/0x2e0
ip_route_output_flow+0x28/0x130
udp_sendmsg+0x165d/0x2280
udpv6_sendmsg+0x121e/0x24f0
inet6_sendmsg+0xf7/0x140
sock_sendmsg+0xe9/0x180
____sys_sendmsg+0x2b8/0x7a0
___sys_sendmsg+0xf0/0x160
__sys_sendmmsg+0x17e/0x3c0
__x64_sys_sendmmsg+0x9e/0x100
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x462eb9
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8
 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48>
 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3df5af1c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462eb9
RDX: 0000000000000312 RSI: 0000000020001700 RDI: 0000000000000007
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3df5af26bc
R13: 00000000004c372d R14: 0000000000700b10 R15: 00000000ffffffff

It is one use-after-free in ip_check_mc_rcu.
In ip_mc_del_src, the ip_sf_list of pmc has been freed under pmc->lock protection.
But access to ip_sf_list in ip_check_mc_rcu is not protected by the lock.

Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/igmp.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -2730,6 +2730,7 @@ int ip_check_mc_rcu(struct in_device *in
 		rv = 1;
 	} else if (im) {
 		if (src_addr) {
+			spin_lock_bh(&im->lock);
 			for (psf = im->sources; psf; psf = psf->sf_next) {
 				if (psf->sf_inaddr == src_addr)
 					break;
@@ -2740,6 +2741,7 @@ int ip_check_mc_rcu(struct in_device *in
 					im->sfcount[MCAST_EXCLUDE];
 			else
 				rv = im->sfcount[MCAST_EXCLUDE] != 0;
+			spin_unlock_bh(&im->lock);
 		} else
 			rv = 1; /* unspecified source; tentatively allow */
 	}

[PATCH 5.4 23/37] USB: serial: mos7720: improve OOM-handling in read_mos_reg()

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

commit 161a582bd1d8681095f158d11bc679a58f1d026b upstream.

clang static analysis reports this problem

mos7720.c:352:2: warning: Undefined or garbage value returned to caller
        return d;
        ^~~~~~~~

In the parport_mos7715_read_data()'s call to read_mos_reg(), 'd' is
only set after the alloc block.

	buf = kmalloc(1, GFP_KERNEL);
	if (!buf)
		return -ENOMEM;

Although the problem is reported in parport_most7715_read_data(),
none of the callee's of read_mos_reg() check the return status.

Make sure to clear the return-value buffer also on allocation failures.

Fixes: 0d130367abf5 ("USB: serial: mos7720: fix control-message error handling")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210111220904.1035957-1-trix@redhat.com
[ johan: only clear the buffer on errors, amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/mos7720.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -226,8 +226,10 @@ static int read_mos_reg(struct usb_seria
 	int status;
 
 	buf = kmalloc(1, GFP_KERNEL);
-	if (!buf)
+	if (!buf) {
+		*data = 0;
 		return -ENOMEM;
+	}
 
 	status = usb_control_msg(usbdev, pipe, request, requesttype, value,
 				     index, buf, 1, MOS_WDR_TIMEOUT);

[PATCH 5.4 24/37] ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2)

[Greg Kroah-Hartman]

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

commit e1e84eb58eb494b77c8389fc6308b5042dcce791 upstream.

As per RFC792, ICMP errors should be sent to the source host.

However, in configurations with Virtual Routing and Forwarding tables,
looking up which routing table to use is currently done by using the
destination net_device.

commit 9d1a6c4ea43e ("net: icmp_route_lookup should use rt dev to
determine L3 domain") changes the interface passed to
l3mdev_master_ifindex() and inet_addr_type_dev_table() from skb_in->dev
to skb_dst(skb_in)->dev. This effectively uses the destination device
rather than the source device for choosing which routing table should be
used to lookup where to send the ICMP error.

Therefore, if the source and destination interfaces are within separate
VRFs, or one in the global routing table and the other in a VRF, looking
up the source host in the destination interface's routing table will
fail if the destination interface's routing table contains no route to
the source host.

One observable effect of this issue is that traceroute does not work in
the following cases:

- Route leaking between global routing table and VRF
- Route leaking between VRFs

Preferably use the source device routing table when sending ICMP error
messages. If no source device is set, fall-back on the destination
device routing table. Else, use the main routing table (index 0).

[ It has been pointed out that a similar issue may exist with ICMP
  errors triggered when forwarding between network namespaces. It would
  be worthwhile to investigate, but is outside of the scope of this
  investigation. ]

[ It has also been pointed out that a similar issue exists with
  unreachable / fragmentation needed messages, which can be triggered by
  changing the MTU of eth1 in r1 to 1400 and running:

  ip netns exec h1 ping -s 1450 -Mdo -c1 172.16.2.2

  Some investigation points to raw_icmp_error() and raw_err() as being
  involved in this last scenario. The focus of this patch is TTL expired
  ICMP messages, which go through icmp_route_lookup.
  Investigation of failure modes related to raw_icmp_error() is beyond
  this investigation's scope. ]

Fixes: 9d1a6c4ea43e ("net: icmp_route_lookup should use rt dev to determine L3 domain")
Link: https://tools.ietf.org/html/rfc792
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/icmp.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -460,6 +460,23 @@ out_bh_enable:
 	local_bh_enable();
 }
 
+/*
+ * The device used for looking up which routing table to use for sending an ICMP
+ * error is preferably the source whenever it is set, which should ensure the
+ * icmp error can be sent to the source host, else lookup using the routing
+ * table of the destination device, else use the main routing table (index 0).
+ */
+static struct net_device *icmp_get_route_lookup_dev(struct sk_buff *skb)
+{
+	struct net_device *route_lookup_dev = NULL;
+
+	if (skb->dev)
+		route_lookup_dev = skb->dev;
+	else if (skb_dst(skb))
+		route_lookup_dev = skb_dst(skb)->dev;
+	return route_lookup_dev;
+}
+
 static struct rtable *icmp_route_lookup(struct net *net,
 					struct flowi4 *fl4,
 					struct sk_buff *skb_in,
@@ -468,6 +485,7 @@ static struct rtable *icmp_route_lookup(
 					int type, int code,
 					struct icmp_bxm *param)
 {
+	struct net_device *route_lookup_dev;
 	struct rtable *rt, *rt2;
 	struct flowi4 fl4_dec;
 	int err;
@@ -482,7 +500,8 @@ static struct rtable *icmp_route_lookup(
 	fl4->flowi4_proto = IPPROTO_ICMP;
 	fl4->fl4_icmp_type = type;
 	fl4->fl4_icmp_code = code;
-	fl4->flowi4_oif = l3mdev_master_ifindex(skb_dst(skb_in)->dev);
+	route_lookup_dev = icmp_get_route_lookup_dev(skb_in);
+	fl4->flowi4_oif = l3mdev_master_ifindex(route_lookup_dev);
 
 	security_skb_classify_flow(skb_in, flowi4_to_flowi(fl4));
 	rt = ip_route_output_key_hash(net, fl4, skb_in);
@@ -506,7 +525,7 @@ static struct rtable *icmp_route_lookup(
 	if (err)
 		goto relookup_failed;
 
-	if (inet_addr_type_dev_table(net, skb_dst(skb_in)->dev,
+	if (inet_addr_type_dev_table(net, route_lookup_dev,
 				     fl4_dec.saddr) == RTN_LOCAL) {
 		rt2 = __ip_route_output_key(net, &fl4_dec);
 		if (IS_ERR(rt2))

[PATCH 5.4 25/37] powerpc/boot: Delete unneeded .globl _zimage_start

[Greg Kroah-Hartman]

From: Fangrui Song <maskray@google.com>

commit 968339fad422a58312f67718691b717dac45c399 upstream.

.globl sets the symbol binding to STB_GLOBAL while .weak sets the
binding to STB_WEAK. GNU as let .weak override .globl since
binutils-gdb 5ca547dc2399a0a5d9f20626d4bf5547c3ccfddd (1996). Clang
integrated assembler let the last win but it may error in the future.

Since it is a convention that only one binding directive is used, just
delete .globl.

Fixes: ee9d21b3b358 ("powerpc/boot: Ensure _zimage_start is a weak symbol")
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200325164257.170229-1-maskray@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/boot/crt0.S |    3 ---
 1 file changed, 3 deletions(-)

--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -44,9 +44,6 @@ p_end:		.long	_end
 p_pstack:	.long	_platform_stack_top
 #endif
 
-	.globl	_zimage_start
-	/* Clang appears to require the .weak directive to be after the symbol
-	 * is defined. See https://bugs.llvm.org/show_bug.cgi?id=38921  */
 	.weak	_zimage_start
 _zimage_start:
 	.globl	_zimage_start_lib

[PATCH 5.4 26/37] net: ll_temac: Remove left-over debug message

[Greg Kroah-Hartman]

From: Esben Haabendal <esben@geanix.com>

commit ce03b94ba682a67e8233c9ee3066071656ded58f upstream.

Fixes: f63963411942 ("net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/xilinx/ll_temac_main.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -939,10 +939,8 @@ temac_start_xmit(struct sk_buff *skb, st
 	wmb();
 	lp->dma_out(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
 
-	if (temac_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1)) {
-		netdev_info(ndev, "%s -> netif_stop_queue\n", __func__);
+	if (temac_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1))
 		netif_stop_queue(ndev);
-	}
 
 	return NETDEV_TX_OK;
 }

[PATCH 5.4 27/37] mm/page_alloc: speed up the iteration of max_order

[Greg Kroah-Hartman]

From: Muchun Song <songmuchun@bytedance.com>

commit 7ad69832f37e3cea8557db6df7c793905f1135e8 upstream.

When we free a page whose order is very close to MAX_ORDER and greater
than pageblock_order, it wastes some CPU cycles to increase max_order to
MAX_ORDER one by one and check the pageblock migratetype of that page
repeatedly especially when MAX_ORDER is much larger than pageblock_order.

We also should not be checking migratetype of buddy when "order ==
MAX_ORDER - 1" as the buddy pfn may be invalid, so adjust the condition.
With the new check, we don't need the max_order check anymore, so we
replace it.

Also adjust max_order initialization so that it's lower by one than
previously, which makes the code hopefully more clear.

Link: https://lkml.kernel.org/r/20201204155109.55451-1-songmuchun@bytedance.com
Fixes: d9dddbf55667 ("mm/page_alloc: prevent merging between isolated and other pageblocks")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/page_alloc.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -906,7 +906,7 @@ static inline void __free_one_page(struc
 	unsigned int max_order;
 	struct capture_control *capc = task_capc(zone);
 
-	max_order = min_t(unsigned int, MAX_ORDER, pageblock_order + 1);
+	max_order = min_t(unsigned int, MAX_ORDER - 1, pageblock_order);
 
 	VM_BUG_ON(!zone_is_initialized(zone));
 	VM_BUG_ON_PAGE(page->flags & PAGE_FLAGS_CHECK_AT_PREP, page);
@@ -919,7 +919,7 @@ static inline void __free_one_page(struc
 	VM_BUG_ON_PAGE(bad_range(zone, page), page);
 
 continue_merging:
-	while (order < max_order - 1) {
+	while (order < max_order) {
 		if (compaction_capture(capc, page, order, migratetype)) {
 			__mod_zone_freepage_state(zone, -(1 << order),
 								migratetype);
@@ -945,7 +945,7 @@ continue_merging:
 		pfn = combined_pfn;
 		order++;
 	}
-	if (max_order < MAX_ORDER) {
+	if (order < MAX_ORDER - 1) {
 		/* If we are here, it means order is >= pageblock_order.
 		 * We want to prevent merge between freepages on isolate
 		 * pageblock and normal pageblock. Without this, pageblock
@@ -966,7 +966,7 @@ continue_merging:
 						is_migrate_isolate(buddy_mt)))
 				goto done_merging;
 		}
-		max_order++;
+		max_order = order + 1;
 		goto continue_merging;
 	}
 

[PATCH 5.4 28/37] Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM"

[Greg Kroah-Hartman]

From: Hayes Wang <hayeswang@realtek.com>

commit 2115d3d482656ea702f7cf308c0ded3500282903 upstream.

This reverts commit 1ee8856de82faec9bc8bd0f2308a7f27e30ba207.

This is used to re-enable ASPM on RTL8106e, if it is possible.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169_main.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4713,6 +4713,7 @@ static void rtl_hw_start_8168g(struct rt
 	rtl_eri_clear_bits(tp, 0x1b0, ERIAR_MASK_0011, BIT(12));
 
 	rtl_pcie_state_l2l3_disable(tp);
+	rtl_hw_aspm_clkreq_enable(tp, true);
 }
 
 static void rtl_hw_start_8168g_1(struct rtl8169_private *tp)

[PATCH 5.4 29/37] x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating

[Greg Kroah-Hartman]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

commit e10de314287c2c14b0e6f0e3e961975ce2f4a83d upstream.

On certain AMD platforms, when the IOMMU performance counter source
(csource) field is zero, power-gating for the counter is enabled, which
prevents write access and returns zero for read access.

This can cause invalid perf result especially when event multiplexing
is needed (i.e. more number of events than available counters) since
the current logic keeps track of the previously read counter value,
and subsequently re-program the counter to continue counting the event.
With power-gating enabled, we cannot gurantee successful re-programming
of the counter.

Workaround this issue by :

1. Modifying the ordering of setting/reading counters and enabing/
   disabling csources to only access the counter when the csource
   is set to non-zero.

2. Since AMD IOMMU PMU does not support interrupt mode, the logic
   can be simplified to always start counting with value zero,
   and accumulate the counter value when stopping without the need
   to keep track and reprogram the counter with the previously read
   counter value.

This has been tested on systems with and without power-gating.

Fixes: 994d6608efe4 ("iommu/amd: Remove performance counter pre-initialization test")
Suggested-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210504065236.4415-1-suravee.suthikulpanit@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/amd/iommu.c |   47 ++++++++++++++++++++++++--------------------
 1 file changed, 26 insertions(+), 21 deletions(-)

--- a/arch/x86/events/amd/iommu.c
+++ b/arch/x86/events/amd/iommu.c
@@ -18,8 +18,6 @@
 #include "../perf_event.h"
 #include "iommu.h"
 
-#define COUNTER_SHIFT		16
-
 /* iommu pmu conf masks */
 #define GET_CSOURCE(x)     ((x)->conf & 0xFFULL)
 #define GET_DEVID(x)       (((x)->conf >> 8)  & 0xFFFFULL)
@@ -285,22 +283,31 @@ static void perf_iommu_start(struct perf
 	WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
 	hwc->state = 0;
 
+	/*
+	 * To account for power-gating, which prevents write to
+	 * the counter, we need to enable the counter
+	 * before setting up counter register.
+	 */
+	perf_iommu_enable_event(event);
+
 	if (flags & PERF_EF_RELOAD) {
-		u64 prev_raw_count = local64_read(&hwc->prev_count);
+		u64 count = 0;
 		struct amd_iommu *iommu = perf_event_2_iommu(event);
 
+		/*
+		 * Since the IOMMU PMU only support counting mode,
+		 * the counter always start with value zero.
+		 */
 		amd_iommu_pc_set_reg(iommu, hwc->iommu_bank, hwc->iommu_cntr,
-				     IOMMU_PC_COUNTER_REG, &prev_raw_count);
+				     IOMMU_PC_COUNTER_REG, &count);
 	}
 
-	perf_iommu_enable_event(event);
 	perf_event_update_userpage(event);
-
 }
 
 static void perf_iommu_read(struct perf_event *event)
 {
-	u64 count, prev, delta;
+	u64 count;
 	struct hw_perf_event *hwc = &event->hw;
 	struct amd_iommu *iommu = perf_event_2_iommu(event);
 
@@ -311,14 +318,11 @@ static void perf_iommu_read(struct perf_
 	/* IOMMU pc counter register is only 48 bits */
 	count &= GENMASK_ULL(47, 0);
 
-	prev = local64_read(&hwc->prev_count);
-	if (local64_cmpxchg(&hwc->prev_count, prev, count) != prev)
-		return;
-
-	/* Handle 48-bit counter overflow */
-	delta = (count << COUNTER_SHIFT) - (prev << COUNTER_SHIFT);
-	delta >>= COUNTER_SHIFT;
-	local64_add(delta, &event->count);
+	/*
+	 * Since the counter always start with value zero,
+	 * simply just accumulate the count for the event.
+	 */
+	local64_add(count, &event->count);
 }
 
 static void perf_iommu_stop(struct perf_event *event, int flags)
@@ -328,15 +332,16 @@ static void perf_iommu_stop(struct perf_
 	if (hwc->state & PERF_HES_UPTODATE)
 		return;
 
+	/*
+	 * To account for power-gating, in which reading the counter would
+	 * return zero, we need to read the register before disabling.
+	 */
+	perf_iommu_read(event);
+	hwc->state |= PERF_HES_UPTODATE;
+
 	perf_iommu_disable_event(event);
 	WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
 	hwc->state |= PERF_HES_STOPPED;
-
-	if (hwc->state & PERF_HES_UPTODATE)
-		return;
-
-	perf_iommu_read(event);
-	hwc->state |= PERF_HES_UPTODATE;
 }
 
 static int perf_iommu_add(struct perf_event *event, int flags)

[PATCH 5.4 30/37] Revert "btrfs: compression: dont try to compress if we dont have enough pages"

[Greg Kroah-Hartman]

From: Qu Wenruo <wqu@suse.com>

commit 4e9655763b82a91e4c341835bb504a2b1590f984 upstream.

This reverts commit f2165627319ffd33a6217275e5690b1ab5c45763.

[BUG]
It's no longer possible to create compressed inline extent after commit
f2165627319f ("btrfs: compression: don't try to compress if we don't
have enough pages").

[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.

- Compressed inline write
  The data is always smaller than one sector and the test lacks the
  condition to properly recognize a non-inline extent.

- Compressed subpage write
  For the incoming subpage compressed write support, we require page
  alignment of the delalloc range.
  And for 64K page size, we can compress just one page into smaller
  sectors.

For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback.  The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.

[FIX]
Fix it by reverting the offending commit.

Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net
Fixes: f2165627319f ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/inode.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -543,7 +543,7 @@ again:
 	 * inode has not been flagged as nocompress.  This flag can
 	 * change at any time if we discover bad compression ratios.
 	 */
-	if (nr_pages > 1 && inode_need_compress(inode, start, end)) {
+	if (inode_need_compress(inode, start, end)) {
 		WARN_ON(pages);
 		pages = kcalloc(nr_pages, sizeof(struct page *), GFP_NOFS);
 		if (!pages) {

[PATCH 5.4 31/37] ALSA: usb-audio: Add registration quirk for JBL Quantum 800

[Greg Kroah-Hartman]

From: Alexander Tsoy <alexander@tsoy.me>

commit c8b177b6e3a005bd8fb0395a4bc5db3470301c28 upstream.

Add another device ID for JBL Quantum 800. It requires the same quirk as
other JBL Quantum devices.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210831002531.116957-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1841,6 +1841,7 @@ static const struct registration_quirk r
 	REG_QUIRK_ENTRY(0x0951, 0x16ed, 2),	/* Kingston HyperX Cloud Alpha S */
 	REG_QUIRK_ENTRY(0x0951, 0x16ea, 2),	/* Kingston HyperX Cloud Flight S */
 	REG_QUIRK_ENTRY(0x0ecb, 0x1f46, 2),	/* JBL Quantum 600 */
+	REG_QUIRK_ENTRY(0x0ecb, 0x1f47, 2),	/* JBL Quantum 800 */
 	REG_QUIRK_ENTRY(0x0ecb, 0x2039, 2),	/* JBL Quantum 400 */
 	REG_QUIRK_ENTRY(0x0ecb, 0x203c, 2),	/* JBL Quantum 600 */
 	REG_QUIRK_ENTRY(0x0ecb, 0x203e, 2),	/* JBL Quantum 800 */

[PATCH 5.4 32/37] usb: host: xhci-rcar: Dont reload firmware after the completion

[Greg Kroah-Hartman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit 57f3ffdc11143f56f1314972fe86fe17a0dcde85 upstream.

According to the datasheet, "Upon the completion of FW Download,
there is no need to write or reload FW.". Otherwise, it's possible
to cause unexpected behaviors. So, adds such a condition.

Fixes: 4ac8918f3a73 ("usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers")
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210827063227.81990-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-rcar.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -134,6 +134,13 @@ static int xhci_rcar_download_firmware(s
 	const struct soc_device_attribute *attr;
 	const char *firmware_name;
 
+	/*
+	 * According to the datasheet, "Upon the completion of FW Download,
+	 * there is no need to write or reload FW".
+	 */
+	if (readl(regs + RCAR_USB3_DL_CTRL) & RCAR_USB3_DL_CTRL_FW_SUCCESS)
+		return 0;
+
 	attr = soc_device_match(rcar_quirks_match);
 	if (attr)
 		quirks = (uintptr_t)attr->data;

[PATCH 5.4 33/37] usb: mtu3: use @mult for HS isoc or intr

[Greg Kroah-Hartman]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

commit fd7cb394ec7efccc3985feb0978cee4d352e1817 upstream.

For HS isoc or intr, should use @mult but not @burst
to save mult value.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1628836253-7432-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/mtu3/mtu3_gadget.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -100,7 +100,7 @@ static int mtu3_ep_enable(struct mtu3_ep
 				usb_endpoint_xfer_int(desc)) {
 			interval = desc->bInterval;
 			interval = clamp_val(interval, 1, 16) - 1;
-			burst = (max_packet & GENMASK(12, 11)) >> 11;
+			mult = (max_packet & GENMASK(12, 11)) >> 11;
 		}
 		break;
 	default:

[PATCH 5.4 34/37] usb: mtu3: fix the wrong HS mult value

[Greg Kroah-Hartman]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

commit 44e4439d8f9f8d0e9da767d1f31e7c211081feca upstream.

usb_endpoint_maxp() returns actual max packet size, @mult will
always be zero, fix it by using usb_endpoint_maxp_mult() instead
to get mult.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1628836253-7432-3-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/mtu3/mtu3_gadget.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -72,14 +72,12 @@ static int mtu3_ep_enable(struct mtu3_ep
 	u32 interval = 0;
 	u32 mult = 0;
 	u32 burst = 0;
-	int max_packet;
 	int ret;
 
 	desc = mep->desc;
 	comp_desc = mep->comp_desc;
 	mep->type = usb_endpoint_type(desc);
-	max_packet = usb_endpoint_maxp(desc);
-	mep->maxp = max_packet & GENMASK(10, 0);
+	mep->maxp = usb_endpoint_maxp(desc);
 
 	switch (mtu->g.speed) {
 	case USB_SPEED_SUPER:
@@ -100,7 +98,7 @@ static int mtu3_ep_enable(struct mtu3_ep
 				usb_endpoint_xfer_int(desc)) {
 			interval = desc->bInterval;
 			interval = clamp_val(interval, 1, 16) - 1;
-			mult = (max_packet & GENMASK(12, 11)) >> 11;
+			mult = usb_endpoint_maxp_mult(desc) - 1;
 		}
 		break;
 	default:

[PATCH 5.4 35/37] xhci: fix unsafe memory usage in xhci tracing

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit cbf286e8ef8337308c259ff5b9ce2e74d403be5a upstream.

Removes static char buffer usage in the following decode functions:
	xhci_decode_trb()
	xhci_decode_ptortsc()

Caller must provide a buffer to use.
In tracing use __get_str() as recommended to pass buffer.

Minor chanes are needed in xhci debugfs code as these functions are also
used there. Changes include moving XHCI_MSG_MAX definititon from
xhci-trace.h to xhci.h

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-debugfs.c |    6 +++-
 drivers/usb/host/xhci-trace.h   |    8 +++---
 drivers/usb/host/xhci.h         |   52 +++++++++++++++++++++-------------------
 3 files changed, 36 insertions(+), 30 deletions(-)

--- a/drivers/usb/host/xhci-debugfs.c
+++ b/drivers/usb/host/xhci-debugfs.c
@@ -197,12 +197,13 @@ static void xhci_ring_dump_segment(struc
 	int			i;
 	dma_addr_t		dma;
 	union xhci_trb		*trb;
+	char			str[XHCI_MSG_MAX];
 
 	for (i = 0; i < TRBS_PER_SEGMENT; i++) {
 		trb = &seg->trbs[i];
 		dma = seg->dma + i * sizeof(*trb);
 		seq_printf(s, "%pad: %s\n", &dma,
-			   xhci_decode_trb(le32_to_cpu(trb->generic.field[0]),
+			   xhci_decode_trb(str, XHCI_MSG_MAX, le32_to_cpu(trb->generic.field[0]),
 					   le32_to_cpu(trb->generic.field[1]),
 					   le32_to_cpu(trb->generic.field[2]),
 					   le32_to_cpu(trb->generic.field[3])));
@@ -340,9 +341,10 @@ static int xhci_portsc_show(struct seq_f
 {
 	struct xhci_port	*port = s->private;
 	u32			portsc;
+	char			str[XHCI_MSG_MAX];
 
 	portsc = readl(port->addr);
-	seq_printf(s, "%s\n", xhci_decode_portsc(portsc));
+	seq_printf(s, "%s\n", xhci_decode_portsc(str, portsc));
 
 	return 0;
 }
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -25,8 +25,6 @@
 #include "xhci.h"
 #include "xhci-dbgcap.h"
 
-#define XHCI_MSG_MAX	500
-
 DECLARE_EVENT_CLASS(xhci_log_msg,
 	TP_PROTO(struct va_format *vaf),
 	TP_ARGS(vaf),
@@ -122,6 +120,7 @@ DECLARE_EVENT_CLASS(xhci_log_trb,
 		__field(u32, field1)
 		__field(u32, field2)
 		__field(u32, field3)
+		__dynamic_array(char, str, XHCI_MSG_MAX)
 	),
 	TP_fast_assign(
 		__entry->type = ring->type;
@@ -131,7 +130,7 @@ DECLARE_EVENT_CLASS(xhci_log_trb,
 		__entry->field3 = le32_to_cpu(trb->field[3]);
 	),
 	TP_printk("%s: %s", xhci_ring_type_string(__entry->type),
-			xhci_decode_trb(__entry->field0, __entry->field1,
+		  xhci_decode_trb(__get_str(str), XHCI_MSG_MAX, __entry->field0, __entry->field1,
 					__entry->field2, __entry->field3)
 	)
 );
@@ -523,6 +522,7 @@ DECLARE_EVENT_CLASS(xhci_log_portsc,
 		    TP_STRUCT__entry(
 				     __field(u32, portnum)
 				     __field(u32, portsc)
+				     __dynamic_array(char, str, XHCI_MSG_MAX)
 				     ),
 		    TP_fast_assign(
 				   __entry->portnum = portnum;
@@ -530,7 +530,7 @@ DECLARE_EVENT_CLASS(xhci_log_portsc,
 				   ),
 		    TP_printk("port-%d: %s",
 			      __entry->portnum,
-			      xhci_decode_portsc(__entry->portsc)
+			      xhci_decode_portsc(__get_str(str), __entry->portsc)
 			      )
 );
 
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -22,6 +22,9 @@
 #include	"xhci-ext-caps.h"
 #include "pci-quirks.h"
 
+/* max buffer size for trace and debug messages */
+#define XHCI_MSG_MAX		500
+
 /* xHCI PCI Configuration Registers */
 #define XHCI_SBRN_OFFSET	(0x60)
 
@@ -2217,15 +2220,14 @@ static inline char *xhci_slot_state_stri
 	}
 }
 
-static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2,
-		u32 field3)
+static inline const char *xhci_decode_trb(char *str, size_t size,
+					  u32 field0, u32 field1, u32 field2, u32 field3)
 {
-	static char str[256];
 	int type = TRB_FIELD_TO_TYPE(field3);
 
 	switch (type) {
 	case TRB_LINK:
-		sprintf(str,
+		snprintf(str, size,
 			"LINK %08x%08x intr %d type '%s' flags %c:%c:%c:%c",
 			field1, field0, GET_INTR_TARGET(field2),
 			xhci_trb_type_string(type),
@@ -2242,7 +2244,7 @@ static inline const char *xhci_decode_tr
 	case TRB_HC_EVENT:
 	case TRB_DEV_NOTE:
 	case TRB_MFINDEX_WRAP:
-		sprintf(str,
+		snprintf(str, size,
 			"TRB %08x%08x status '%s' len %d slot %d ep %d type '%s' flags %c:%c",
 			field1, field0,
 			xhci_trb_comp_code_string(GET_COMP_CODE(field2)),
@@ -2255,7 +2257,8 @@ static inline const char *xhci_decode_tr
 
 		break;
 	case TRB_SETUP:
-		sprintf(str, "bRequestType %02x bRequest %02x wValue %02x%02x wIndex %02x%02x wLength %d length %d TD size %d intr %d type '%s' flags %c:%c:%c",
+		snprintf(str, size,
+			"bRequestType %02x bRequest %02x wValue %02x%02x wIndex %02x%02x wLength %d length %d TD size %d intr %d type '%s' flags %c:%c:%c",
 				field0 & 0xff,
 				(field0 & 0xff00) >> 8,
 				(field0 & 0xff000000) >> 24,
@@ -2272,7 +2275,8 @@ static inline const char *xhci_decode_tr
 				field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_DATA:
-		sprintf(str, "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c",
+		snprintf(str, size,
+			 "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c",
 				field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
 				GET_INTR_TARGET(field2),
 				xhci_trb_type_string(type),
@@ -2285,7 +2289,8 @@ static inline const char *xhci_decode_tr
 				field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_STATUS:
-		sprintf(str, "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c",
+		snprintf(str, size,
+			 "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c",
 				field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
 				GET_INTR_TARGET(field2),
 				xhci_trb_type_string(type),
@@ -2298,7 +2303,7 @@ static inline const char *xhci_decode_tr
 	case TRB_ISOC:
 	case TRB_EVENT_DATA:
 	case TRB_TR_NOOP:
-		sprintf(str,
+		snprintf(str, size,
 			"Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c:%c",
 			field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
 			GET_INTR_TARGET(field2),
@@ -2315,21 +2320,21 @@ static inline const char *xhci_decode_tr
 
 	case TRB_CMD_NOOP:
 	case TRB_ENABLE_SLOT:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: flags %c",
 			xhci_trb_type_string(type),
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_DISABLE_SLOT:
 	case TRB_NEG_BANDWIDTH:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: slot %d flags %c",
 			xhci_trb_type_string(type),
 			TRB_TO_SLOT_ID(field3),
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_ADDR_DEV:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: ctx %08x%08x slot %d flags %c:%c",
 			xhci_trb_type_string(type),
 			field1, field0,
@@ -2338,7 +2343,7 @@ static inline const char *xhci_decode_tr
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_CONFIG_EP:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: ctx %08x%08x slot %d flags %c:%c",
 			xhci_trb_type_string(type),
 			field1, field0,
@@ -2347,7 +2352,7 @@ static inline const char *xhci_decode_tr
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_EVAL_CONTEXT:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: ctx %08x%08x slot %d flags %c",
 			xhci_trb_type_string(type),
 			field1, field0,
@@ -2355,7 +2360,7 @@ static inline const char *xhci_decode_tr
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_RESET_EP:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: ctx %08x%08x slot %d ep %d flags %c:%c",
 			xhci_trb_type_string(type),
 			field1, field0,
@@ -2376,7 +2381,7 @@ static inline const char *xhci_decode_tr
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_SET_DEQ:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: deq %08x%08x stream %d slot %d ep %d flags %c",
 			xhci_trb_type_string(type),
 			field1, field0,
@@ -2387,14 +2392,14 @@ static inline const char *xhci_decode_tr
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_RESET_DEV:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: slot %d flags %c",
 			xhci_trb_type_string(type),
 			TRB_TO_SLOT_ID(field3),
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_FORCE_EVENT:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: event %08x%08x vf intr %d vf id %d flags %c",
 			xhci_trb_type_string(type),
 			field1, field0,
@@ -2403,14 +2408,14 @@ static inline const char *xhci_decode_tr
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_SET_LT:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: belt %d flags %c",
 			xhci_trb_type_string(type),
 			TRB_TO_BELT(field3),
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_GET_BW:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: ctx %08x%08x slot %d speed %d flags %c",
 			xhci_trb_type_string(type),
 			field1, field0,
@@ -2419,7 +2424,7 @@ static inline const char *xhci_decode_tr
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	case TRB_FORCE_HEADER:
-		sprintf(str,
+		snprintf(str, size,
 			"%s: info %08x%08x%08x pkt type %d roothub port %d flags %c",
 			xhci_trb_type_string(type),
 			field2, field1, field0 & 0xffffffe0,
@@ -2428,7 +2433,7 @@ static inline const char *xhci_decode_tr
 			field3 & TRB_CYCLE ? 'C' : 'c');
 		break;
 	default:
-		sprintf(str,
+		snprintf(str, size,
 			"type '%s' -> raw %08x %08x %08x %08x",
 			xhci_trb_type_string(type),
 			field0, field1, field2, field3);
@@ -2553,9 +2558,8 @@ static inline const char *xhci_portsc_li
 	return "Unknown";
 }
 
-static inline const char *xhci_decode_portsc(u32 portsc)
+static inline const char *xhci_decode_portsc(char *str, u32 portsc)
 {
-	static char str[256];
 	int ret;
 
 	ret = sprintf(str, "%s %s %s Link:%s PortSpeed:%d ",

[PATCH 5.4 36/37] x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions

[Greg Kroah-Hartman]

From: Paul Gortmaker <paul.gortmaker@windriver.com>

commit a729691b541f6e63043beae72e635635abe5dc09 upstream.

When this platform was relatively new in November 2011, with early BIOS
revisions, a reboot quirk was added in commit 6be30bb7d750 ("x86/reboot:
Blacklist Dell OptiPlex 990 known to require PCI reboot")

However, this quirk (and several others) are open-ended to all BIOS
versions and left no automatic expiry if/when the system BIOS fixed the
issue, meaning that nobody is likely to come along and re-test.

What is really problematic with using PCI reboot as this quirk does, is
that it causes this platform to do a full power down, wait one second,
and then power back on.  This is less than ideal if one is using it for
boot testing and/or bisecting kernels when legacy rotating hard disks
are installed.

It was only by chance that the quirk was noticed in dmesg - and when
disabled it turned out that it wasn't required anymore (BIOS A24), and a
default reboot would work fine without the "harshness" of power cycling the
machine (and disks) down and up like the PCI reboot does.

Doing a bit more research, it seems that the "newest" BIOS for which the
issue was reported[1] was version A06, however Dell[2] seemed to suggest
only up to and including version A05, with the A06 having a large number of
fixes[3] listed.

As is typical with a new platform, the initial BIOS updates come frequently
and then taper off (and in this case, with a revival for CPU CVEs); a
search for O990-A<ver>.exe reveals the following dates:

        A02     16 Mar 2011
        A03     11 May 2011
        A06     14 Sep 2011
        A07     24 Oct 2011
        A10     08 Dec 2011
        A14     06 Sep 2012
        A16     15 Oct 2012
        A18     30 Sep 2013
        A19     23 Sep 2015
        A20     02 Jun 2017
        A23     07 Mar 2018
        A24     21 Aug 2018

While it's overkill to flash and test each of the above, it would seem
likely that the issue was contained within A0x BIOS versions, given the
dates above and the dates of issue reports[4] from distros.  So rather than
just throw out the quirk entirely, limit the scope to just those early BIOS
versions, in case people are still running systems from 2011 with the
original as-shipped early A0x BIOS versions.

[1] https://lore.kernel.org/lkml/1320373471-3942-1-git-send-email-trenn@suse.de/
[2] https://www.dell.com/support/kbdoc/en-ca/000131908/linux-based-operating-systems-stall-upon-reboot-on-optiplex-390-790-990-systems
[3] https://www.dell.com/support/home/en-ca/drivers/driversdetails?driverid=85j10
[4] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/768039

Fixes: 6be30bb7d750 ("x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210530162447.996461-4-paul.gortmaker@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/reboot.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -388,10 +388,11 @@ static const struct dmi_system_id reboot
 	},
 	{	/* Handle problems with rebooting on the OptiPlex 990. */
 		.callback = set_pci_reboot,
-		.ident = "Dell OptiPlex 990",
+		.ident = "Dell OptiPlex 990 BIOS A0x",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
+			DMI_MATCH(DMI_BIOS_VERSION, "A0"),
 		},
 	},
 	{	/* Handle problems with rebooting on Dell 300's */

[PATCH 5.4 37/37] PCI: Call Max Payload Size-related fixup quirks early

[Greg Kroah-Hartman]

From: Marek Behún <kabel@kernel.org>

commit b8da302e2955fe4d41eb9d48199242674d77dbe0 upstream.

pci_device_add() calls HEADER fixups after pci_configure_device(), which
configures Max Payload Size.

Convert MPS-related fixups to EARLY fixups so pci_configure_mps() takes
them into account.

Fixes: 27d868b5e6cfa ("PCI: Set MPS to match upstream bridge")
Link: https://lore.kernel.org/r/20210624171418.27194-1-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3246,12 +3246,12 @@ static void fixup_mpss_256(struct pci_de
 {
 	dev->pcie_mpss = 1; /* 256 bytes */
 }
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
-			 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
-			 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
-			 PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+			PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+			PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+			PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
 
 /*
  * Intel 5000 and 5100 Memory controllers have an erratum with read completion

Re: [PATCH 5.4 00/37] 5.4.145-rc1 review

[Florian Fainelli]

On 9/10/2021 5:30 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.145 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 12 Sep 2021 12:29:07 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.145-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 00/37] 5.4.145-rc1 review

[Shuah Khan]

On 9/10/21 6:30 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.145 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 12 Sep 2021 12:29:07 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.145-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/37] 5.4.145-rc1 review

[Samuel Zou]

On 2021/9/10 20:30, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.145 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 12 Sep 2021 12:29:07 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.145-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.4.145-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.145-rc1
Commit: 2aced47424ee3560da98a833740cfb179b754fba
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.4 00/37] 5.4.145-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Fri, Sep 10, 2021 at 02:30:03PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.145 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 12 Sep 2021 12:29:07 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.1.1 20210816): 65 configs -> no new failure
arm (gcc version 11.1.1 20210816): 107 configs -> no new failure
arm64 (gcc version 11.1.1 20210816): 2 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/118


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.4 00/37] 5.4.145-rc1 review

[Guenter Roeck]

On Fri, Sep 10, 2021 at 02:30:03PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.145 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 12 Sep 2021 12:29:07 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 443 pass: 443 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.4 00/37] 5.4.145-rc1 review

[Daniel Díaz]

Hello!

On 9/10/21 7:30 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.145 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 12 Sep 2021 12:29:07 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.145-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.4.145-rc1
* git: ['https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git', 'https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc']
* git branch: linux-5.4.y
* git commit: c7a4f9e9970a3255ff44d518561096c2e4b3a5e0
* git describe: v5.4.144-38-gc7a4f9e9970a
* test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.144-38-gc7a4f9e9970a

## No regressions (compared to v5.4.144)

## No fixes (compared to v5.4.144)

## Test result summary
total: 84479, pass: 69774, fail: 753, skip: 12910, xfail: 1042

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 288 total, 288 passed, 0 failed
* arm64: 38 total, 38 passed, 0 failed
* dragonboard-410c: 2 total, 2 passed, 0 failed
* hi6220-hikey: 2 total, 2 passed, 0 failed
* i386: 20 total, 20 passed, 0 failed
* juno-r2: 2 total, 2 passed, 0 failed
* mips: 51 total, 51 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 36 total, 36 passed, 0 failed
* riscv: 30 total, 30 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 2 total, 2 passed, 0 failed
* x86: 2 total, 2 passed, 0 failed
* x86_64: 38 total, 38 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance


Greetings!

Daniel Díaz
daniel.diaz@linaro.org

-- 
Linaro LKFT
https://lkft.linaro.org