[PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[Gustavo Pimentel]

This patch series adds a new driver called xData-pcie for the Synopsys
DesignWare PCIe prototype.

The driver configures and enables the Synopsys DesignWare PCIe traffic
generator IP inside of prototype Endpoint which will generate upstream
and downstream PCIe traffic. This allows to quickly test the PCIe link
throughput speed and check is the prototype solution has some limitation
or not.

Cc: Derek Kiernan <derek.kiernan@xilinx.com>
Cc: Dragan Cvetic <dragan.cvetic@xilinx.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-pci@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Changes:
 V2: Rework driver according to Greg Kroah-Hartman feedback 
 V3: Fixed issues detected while running on 64 bits platforms

Gustavo Pimentel (5):
  misc: Add Synopsys DesignWare xData IP driver
  misc: Add Synopsys DesignWare xData IP driver to Makefile
  misc: Add Synopsys DesignWare xData IP driver to Kconfig
  Documentation: misc-devices: Add Documentation for dw-xdata-pcie
    driver
  MAINTAINERS: Add Synopsys xData IP driver maintainer

 Documentation/misc-devices/dw-xdata-pcie.rst |  40 +++
 MAINTAINERS                                  |   7 +
 drivers/misc/Kconfig                         |  11 +
 drivers/misc/Makefile                        |   1 +
 drivers/misc/dw-xdata-pcie.c                 | 379 +++++++++++++++++++++++++++
 5 files changed, 438 insertions(+)
 create mode 100644 Documentation/misc-devices/dw-xdata-pcie.rst
 create mode 100644 drivers/misc/dw-xdata-pcie.c

-- 
2.7.4

[PATCH v3 1/5] misc: Add Synopsys DesignWare xData IP driver

[Gustavo Pimentel]

Add Synopsys DesignWare xData IP driver. This driver enables/disables
the PCI traffic generator module pertain to the Synopsys DesignWare
prototype.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
 drivers/misc/dw-xdata-pcie.c | 379 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 379 insertions(+)
 create mode 100644 drivers/misc/dw-xdata-pcie.c

diff --git a/drivers/misc/dw-xdata-pcie.c b/drivers/misc/dw-xdata-pcie.c
new file mode 100644
index 00000000..683bfda
--- /dev/null
+++ b/drivers/misc/dw-xdata-pcie.c
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Synopsys, Inc. and/or its affiliates.
+ * Synopsys DesignWare xData driver
+ *
+ * Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/pci-epf.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#define DW_XDATA_DRIVER_NAME		"dw-xdata-pcie"
+
+#define DW_XDATA_EP_MEM_OFFSET		0x8000000
+
+struct dw_xdata_pcie_data {
+	/* xData registers location */
+	enum pci_barno			rg_bar;
+	off_t				rg_off;
+	size_t				rg_sz;
+};
+
+static const struct dw_xdata_pcie_data snps_edda_data = {
+	/* xData registers location */
+	.rg_bar				= BAR_0,
+	.rg_off				= 0x00000000,   /*   0 Kbytes */
+	.rg_sz				= 0x0000012c,   /* 300  bytes */
+};
+
+#define STATUS_DONE			BIT(0)
+
+#define CONTROL_DOORBELL		BIT(0)
+#define CONTROL_IS_WRITE		BIT(1)
+#define CONTROL_LENGTH(a)		FIELD_PREP(GENMASK(13, 2), a)
+#define CONTROL_PATTERN_INC		BIT(16)
+#define CONTROL_NO_ADDR_INC		BIT(18)
+
+#define XPERF_CONTROL_ENABLE		BIT(5)
+
+struct dw_xdata_regs {
+	u32 addr_lsb;					/* 0x000 */
+	u32 addr_msb;					/* 0x004 */
+	u32 burst_cnt;					/* 0x008 */
+	u32 control;					/* 0x00c */
+	u32 pattern;					/* 0x010 */
+	u32 status;					/* 0x014 */
+	u32 RAM_addr;					/* 0x018 */
+	u32 RAM_port;					/* 0x01c */
+	u32 _reserved0[14];				/* 0x020..0x054 */
+	u32 perf_control;				/* 0x058 */
+	u32 _reserved1[41];				/* 0x05c..0x0fc */
+	u32 wr_cnt_lsb;					/* 0x100 */
+	u32 wr_cnt_msb;					/* 0x104 */
+	u32 rd_cnt_lsb;					/* 0x108 */
+	u32 rd_cnt_msb;					/* 0x10c */
+} __packed;
+
+struct dw_xdata_region {
+	phys_addr_t paddr;				/* physical address */
+	void __iomem *vaddr;				/* virtual address */
+	size_t sz;					/* size */
+};
+
+struct dw_xdata {
+	struct dw_xdata_region rg_region;		/* registers */
+	size_t max_wr_len;				/* max wr xfer len */
+	size_t max_rd_len;				/* max rd xfer len */
+	struct pci_dev *pdev;
+};
+
+static inline struct dw_xdata_regs __iomem *__dw_regs(struct dw_xdata *dw)
+{
+	return dw->rg_region.vaddr;
+}
+
+static void dw_xdata_stop(struct dw_xdata *dw)
+{
+	u32 burst = readl(&(__dw_regs(dw)->burst_cnt));
+
+	if (burst & BIT(31)) {
+		burst &= ~(u32)BIT(31);
+		writel(burst, &(__dw_regs(dw)->burst_cnt));
+	}
+}
+
+static void dw_xdata_start(struct dw_xdata *dw, bool write)
+{
+	u32 control, status;
+
+	/* Stop first if xfer in progress */
+	dw_xdata_stop(dw);
+
+	/* Clear status register */
+	writel(0x0, &(__dw_regs(dw)->status));
+
+	/* Burst count register set for continuous until stopped */
+	writel(0x80001001, &(__dw_regs(dw)->burst_cnt));
+
+	/* Pattern register */
+	writel(0x0, &(__dw_regs(dw)->pattern));
+
+	/* Control register */
+	control = CONTROL_DOORBELL | CONTROL_PATTERN_INC | CONTROL_NO_ADDR_INC;
+	if (write) {
+		control |= CONTROL_IS_WRITE;
+		control |= CONTROL_LENGTH(dw->max_wr_len);
+	} else {
+		control |= CONTROL_LENGTH(dw->max_rd_len);
+	}
+	writel(control, &(__dw_regs(dw)->control));
+
+	usleep_range(100, 150);
+
+	status = readl(&(__dw_regs(dw)->status));
+	if (!(status & STATUS_DONE))
+		pci_dbg(dw->pdev, "xData: started %s direction\n",
+			write ? "write" : "read");
+}
+
+static void dw_xdata_perf_meas(struct dw_xdata *dw, u64 *data, bool write)
+{
+	if (write) {
+		*data = readl(&(__dw_regs(dw)->wr_cnt_msb));
+		*data <<= 32;
+		*data |= readl(&(__dw_regs(dw)->wr_cnt_lsb));
+	} else {
+		*data = readl(&(__dw_regs(dw)->rd_cnt_msb));
+		*data <<= 32;
+		*data |= readl(&(__dw_regs(dw)->rd_cnt_lsb));
+	}
+}
+
+static u64 dw_xdata_perf_diff(u64 *m1, u64 *m2, u64 time)
+{
+	u64 rate = (*m1 - *m2);
+
+	rate *= (1000 * 1000 * 1000);
+	rate >>= 20;
+	rate = DIV_ROUND_CLOSEST_ULL(rate, time);
+
+	return rate;
+}
+
+static void dw_xdata_perf(struct dw_xdata *dw, u64 *rate, bool write)
+{
+	u64 data[2], time[2], diff;
+
+	/* First measurement */
+	writel(0x0, &(__dw_regs(dw)->perf_control));
+	dw_xdata_perf_meas(dw, &data[0], write);
+	time[0] = jiffies;
+	writel((u32)XPERF_CONTROL_ENABLE, &(__dw_regs(dw)->perf_control));
+
+	/* Delay 100ms */
+	mdelay(100);
+
+	/* Second measurement */
+	writel(0x0, &(__dw_regs(dw)->perf_control));
+	dw_xdata_perf_meas(dw, &data[1], write);
+	time[1] = jiffies;
+	writel((u32)XPERF_CONTROL_ENABLE, &(__dw_regs(dw)->perf_control));
+
+	/* Calculations */
+	diff = jiffies_to_nsecs(time[1] - time[0]);
+	*rate = dw_xdata_perf_diff(&data[1], &data[0], diff);
+
+	pci_dbg(dw->pdev, "xData: time=%llu us, %s=%llu MB/s\n",
+		diff, write ? "write" : "read", *rate);
+}
+
+static inline struct device *kobj2device(struct kobject *kobj)
+{
+	return container_of(kobj, struct device, kobj);
+}
+
+static inline struct pci_dev *device2pci_dev(struct device *dev)
+{
+	return container_of(dev, struct pci_dev, dev);
+}
+
+static ssize_t sysfs_write_show(struct kobject *kobj,
+				struct kobj_attribute *attr, char *buf)
+{
+	struct device *dev = kobj2device(kobj);
+	struct pci_dev *pdev = device2pci_dev(dev);
+	struct dw_xdata *dw = pci_get_drvdata(pdev);
+	u64 rate;
+
+	dw_xdata_perf(dw, &rate, true);
+	return sprintf(buf, "%llu MB/s\n", rate);
+}
+
+static ssize_t sysfs_write_store(struct kobject *kobj,
+				 struct kobj_attribute *attr, const char *buf,
+				 size_t count)
+{
+	struct device *dev = kobj2device(kobj);
+	struct pci_dev *pdev = device2pci_dev(dev);
+	struct dw_xdata *dw = pci_get_drvdata(pdev);
+
+	pci_dbg(pdev, "xData: requested write transfer\n");
+	dw_xdata_start(dw, true);
+
+	return count;
+}
+
+struct kobj_attribute sysfs_write_attr = __ATTR(write, 0644,
+						sysfs_write_show,
+						sysfs_write_store);
+
+static ssize_t sysfs_read_show(struct kobject *kobj,
+			       struct kobj_attribute *attr, char *buf)
+{
+	struct device *dev = kobj2device(kobj);
+	struct pci_dev *pdev = device2pci_dev(dev);
+	struct dw_xdata *dw = pci_get_drvdata(pdev);
+	u64 rate;
+
+	dw_xdata_perf(dw, &rate, false);
+	return sprintf(buf, "%llu MB/s\n", rate);
+}
+
+static ssize_t sysfs_read_store(struct kobject *kobj,
+				struct kobj_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct device *dev = kobj2device(kobj);
+	struct pci_dev *pdev = device2pci_dev(dev);
+	struct dw_xdata *dw = pci_get_drvdata(pdev);
+
+	pci_dbg(pdev, "xData: requested read transfer\n");
+	dw_xdata_start(dw, false);
+
+	return count;
+}
+
+struct kobj_attribute sysfs_read_attr = __ATTR(read, 0644,
+					       sysfs_read_show,
+					       sysfs_read_store);
+
+static ssize_t sysfs_stop_store(struct kobject *kobj,
+				struct kobj_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct device *dev = kobj2device(kobj);
+	struct pci_dev *pdev = device2pci_dev(dev);
+	struct dw_xdata *dw = pci_get_drvdata(pdev);
+
+	pci_dbg(pdev, "xData: requested stop any transfer\n");
+	dw_xdata_stop(dw);
+
+	return count;
+}
+
+struct kobj_attribute sysfs_stop_attr = __ATTR(stop, 0644,
+					       NULL,
+					       sysfs_stop_store);
+
+static int dw_xdata_pcie_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *pid)
+{
+	const struct dw_xdata_pcie_data *pdata = (void *)pid->driver_data;
+	struct device *dev = &pdev->dev;
+	struct dw_xdata *dw;
+	u64 addr;
+	int err;
+
+	/* Enable PCI device */
+	err = pcim_enable_device(pdev);
+	if (err) {
+		pci_err(pdev, "enabling device failed\n");
+		return err;
+	}
+
+	/* Mapping PCI BAR regions */
+	err = pcim_iomap_regions(pdev, BIT(pdata->rg_bar), pci_name(pdev));
+	if (err) {
+		pci_err(pdev, "xData BAR I/O remapping failed\n");
+		return err;
+	}
+
+	pci_set_master(pdev);
+
+	/* Allocate memory */
+	dw = devm_kzalloc(&pdev->dev, sizeof(*dw), GFP_KERNEL);
+	if (!dw)
+		return -ENOMEM;
+
+	/* Data structure initialization */
+	dw->rg_region.vaddr = pcim_iomap_table(pdev)[pdata->rg_bar];
+	if (!dw->rg_region.vaddr)
+		return -ENOMEM;
+
+	dw->rg_region.vaddr += pdata->rg_off;
+	dw->rg_region.paddr = pdev->resource[pdata->rg_bar].start;
+	dw->rg_region.paddr += pdata->rg_off;
+	dw->rg_region.sz = pdata->rg_sz;
+
+	dw->max_wr_len = pcie_get_mps(pdev);
+	dw->max_wr_len >>= 2;
+
+	dw->max_rd_len = pcie_get_readrq(pdev);
+	dw->max_rd_len >>= 2;
+
+	dw->pdev = pdev;
+
+	writel(0x0, &(__dw_regs(dw)->RAM_addr));
+	writel(0x0, &(__dw_regs(dw)->RAM_port));
+
+	addr = dw->rg_region.paddr + DW_XDATA_EP_MEM_OFFSET;
+	writel(lower_32_bits(addr), &(__dw_regs(dw)->addr_lsb));
+	writel(upper_32_bits(addr), &(__dw_regs(dw)->addr_msb));
+	pci_dbg(pdev, "xData: target address = 0x%.16llx\n", addr);
+
+	pci_dbg(pdev, "xData: wr_len=%zu, rd_len=%zu\n",
+		dw->max_wr_len * 4, dw->max_rd_len * 4);
+
+	err = sysfs_create_file(&dev->kobj, &sysfs_write_attr.attr);
+	if (err)
+		return err;
+
+	err = sysfs_create_file(&dev->kobj, &sysfs_read_attr.attr);
+	if (err)
+		return err;
+
+	err = sysfs_create_file(&dev->kobj, &sysfs_stop_attr.attr);
+	if (err)
+		return err;
+
+	err = sysfs_create_link(kernel_kobj, &dev->kobj, DW_XDATA_DRIVER_NAME);
+	if (err)
+		return err;
+
+	/* Saving data structure reference */
+	pci_set_drvdata(pdev, dw);
+
+	return 0;
+}
+
+static void dw_xdata_pcie_remove(struct pci_dev *pdev)
+{
+	struct dw_xdata *dw = pci_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+
+	if (dw)
+		dw_xdata_stop(dw);
+
+	sysfs_remove_link(kernel_kobj, DW_XDATA_DRIVER_NAME);
+	sysfs_remove_file(&dev->kobj, &sysfs_stop_attr.attr);
+	sysfs_remove_file(&dev->kobj, &sysfs_read_attr.attr);
+	sysfs_remove_file(&dev->kobj, &sysfs_write_attr.attr);
+	kobject_put(&dev->kobj);
+}
+
+static const struct pci_device_id dw_xdata_pcie_id_table[] = {
+	{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, &snps_edda_data) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, dw_xdata_pcie_id_table);
+
+static struct pci_driver dw_xdata_pcie_driver = {
+	.name		= DW_XDATA_DRIVER_NAME,
+	.id_table	= dw_xdata_pcie_id_table,
+	.probe		= dw_xdata_pcie_probe,
+	.remove		= dw_xdata_pcie_remove,
+};
+
+module_pci_driver(dw_xdata_pcie_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Synopsys DesignWare xData PCIe driver");
+MODULE_AUTHOR("Gustavo Pimentel <gustavo.pimentel@synopsys.com>");
+
-- 
2.7.4

[PATCH v3 2/5] misc: Add Synopsys DesignWare xData IP driver to Makefile

[Gustavo Pimentel]

Add Synopsys DesignWare xData IP driver to Makefile.

This driver enables/disables the PCIe traffic generator module
pertain to the Synopsys DesignWare prototype.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
 drivers/misc/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 2521359..26a27d2 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -50,6 +50,7 @@ obj-y				+= mic/
 obj-$(CONFIG_GENWQE)		+= genwqe/
 obj-$(CONFIG_ECHO)		+= echo/
 obj-$(CONFIG_CXL_BASE)		+= cxl/
+obj-$(CONFIG_DW_XDATA_PCIE)	+= dw-xdata-pcie.o
 obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
 obj-$(CONFIG_OCXL)		+= ocxl/
 obj-y				+= cardreader/
-- 
2.7.4

[PATCH v3 3/5] misc: Add Synopsys DesignWare xData IP driver to Kconfig

[Gustavo Pimentel]

Add Synopsys DesignWare xData IP driver to Kconfig.

This driver enables/disables the PCIe traffic generator module
pertain to the Synopsys DesignWare prototype.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
 drivers/misc/Kconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d5ce808..3d73f5c 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -423,6 +423,17 @@ config SRAM
 config SRAM_EXEC
 	bool
 
+config DW_XDATA_PCIE
+	depends on PCI
+	tristate "Synopsys DesignWare xData PCIe driver"
+	default	n
+	help
+	  This driver allows controlling Synopsys DesignWare PCIe traffic
+	  generator IP also known as xData, present in Synopsys Designware
+	  PCIe Endpoint prototype.
+
+	  If unsure, say N.
+
 config PCI_ENDPOINT_TEST
 	depends on PCI
 	select CRC32
-- 
2.7.4

[PATCH v3 4/5] Documentation: misc-devices: Add Documentation for dw-xdata-pcie driver

[Gustavo Pimentel]

Add Documentation for dw-xdata-pcie driver.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
 Documentation/misc-devices/dw-xdata-pcie.rst | 40 ++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/misc-devices/dw-xdata-pcie.rst

diff --git a/Documentation/misc-devices/dw-xdata-pcie.rst b/Documentation/misc-devices/dw-xdata-pcie.rst
new file mode 100644
index 00000000..3af9fad
--- /dev/null
+++ b/Documentation/misc-devices/dw-xdata-pcie.rst
@@ -0,0 +1,40 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================================================
+Driver for Synopsys DesignWare PCIe traffic generator (also known as xData)
+===========================================================================
+
+This driver should be used as a host-side (Root Complex) driver and Synopsys
+DesignWare prototype that includes this IP.
+
+The "dw-xdata-pcie" driver can be used to enable/disable PCIe traffic
+generator in either direction (mutual exclusion) besides allowing the
+PCIe link performance analysis.
+
+The interaction with this driver is done through the module parameter and
+can be changed in runtime. The driver outputs the requested command state
+information to /var/log/kern.log or dmesg.
+
+Request write TLPs traffic generation - Root Complex to Endpoint direction
+- Command:
+	echo 1 > /sys/kernel/dw-xdata-pcie/write
+
+Get write TLPs traffic link throughput
+- Command:
+        cat /sys/kernel/dw-xdata-pcie/write
+- Output example:
+	204 MB/s
+
+Request read TLPs traffic generation - Endpoint to Root Complex direction:
+- Command:
+	echo 1 > /sys/kernel/dw-xdata-pcie/read
+
+Get read TLPs traffic link throughput
+- Command:
+        cat /sys/kernel/dw-xdata-pcie/read
+- Output example:
+	199 MB/s
+
+Request to stop any current TLP transfer:
+- Command:
+	echo 1 > /sys/kernel/dw-xdata-pcie/stop
-- 
2.7.4

[PATCH v3 5/5] MAINTAINERS: Add Synopsys xData IP driver maintainer

[Gustavo Pimentel]

Add Synopsys xData IP driver maintainer.

This driver aims to support Synopsys xData IP and is normally distributed
along with Synopsys PCIe EndPoint IP as a PCIe traffic generator (depends
of the use and licensing agreement).

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index e73636b..85713f6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5018,6 +5018,13 @@ S:	Maintained
 F:	drivers/dma/dw-edma/
 F:	include/linux/dma/edma.h
 
+DESIGNWARE XDATA IP DRIVER
+M:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/misc-devices/dw-xdata-pcie.rst
+F:	drivers/misc/dw-xdata-pcie.c
+
 DESIGNWARE USB2 DRD IP DRIVER
 M:	Minas Harutyunyan <hminas@synopsys.com>
 L:	linux-usb@vger.kernel.org
-- 
2.7.4

RE: [PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[Gustavo Pimentel]

Just a kindly reminder.

On Thu, Nov 19, 2020 at 9:19:37, Gustavo Pimentel <gustavo@synopsys.com> 
wrote:

> This patch series adds a new driver called xData-pcie for the Synopsys
> DesignWare PCIe prototype.
> 
> The driver configures and enables the Synopsys DesignWare PCIe traffic
> generator IP inside of prototype Endpoint which will generate upstream
> and downstream PCIe traffic. This allows to quickly test the PCIe link
> throughput speed and check is the prototype solution has some limitation
> or not.
> 
> Cc: Derek Kiernan <derek.kiernan@xilinx.com>
> Cc: Dragan Cvetic <dragan.cvetic@xilinx.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-pci@vger.kernel.org
> Cc: linux-doc@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> 
> Changes:
>  V2: Rework driver according to Greg Kroah-Hartman feedback 
>  V3: Fixed issues detected while running on 64 bits platforms
> 
> Gustavo Pimentel (5):
>   misc: Add Synopsys DesignWare xData IP driver
>   misc: Add Synopsys DesignWare xData IP driver to Makefile
>   misc: Add Synopsys DesignWare xData IP driver to Kconfig
>   Documentation: misc-devices: Add Documentation for dw-xdata-pcie
>     driver
>   MAINTAINERS: Add Synopsys xData IP driver maintainer
> 
>  Documentation/misc-devices/dw-xdata-pcie.rst |  40 +++
>  MAINTAINERS                                  |   7 +
>  drivers/misc/Kconfig                         |  11 +
>  drivers/misc/Makefile                        |   1 +
>  drivers/misc/dw-xdata-pcie.c                 | 379 +++++++++++++++++++++++++++
>  5 files changed, 438 insertions(+)
>  create mode 100644 Documentation/misc-devices/dw-xdata-pcie.rst
>  create mode 100644 drivers/misc/dw-xdata-pcie.c
> 
> -- 
> 2.7.4

Re: [PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[Greg Kroah-Hartman]

On Tue, Feb 02, 2021 at 08:51:10AM +0000, Gustavo Pimentel wrote:
> Just a kindly reminder.

reminder of what?

RE: [PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[Gustavo Pimentel]

On Tue, Feb 2, 2021 at 10:11:21, Greg Kroah-Hartman 
<gregkh@linuxfoundation.org> wrote:

> On Tue, Feb 02, 2021 at 08:51:10AM +0000, Gustavo Pimentel wrote:
> > Just a kindly reminder.
> 
> reminder of what?

To review the patch set. I've done the requested modifications, but I 
didn't get any feedback if this patch series is fine or it needs 
something more to have an ACK.

If some feedback was provided, please accept my apologies. My email 
account was having some issues some time ago and I might not have 
received some emails.

-Gustavo

Re: [PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[Greg Kroah-Hartman]

On Tue, Feb 02, 2021 at 10:38:29AM +0000, Gustavo Pimentel wrote:
> On Tue, Feb 2, 2021 at 10:11:21, Greg Kroah-Hartman 
> <gregkh@linuxfoundation.org> wrote:
> 
> > On Tue, Feb 02, 2021 at 08:51:10AM +0000, Gustavo Pimentel wrote:
> > > Just a kindly reminder.
> > 
> > reminder of what?
> 
> To review the patch set. I've done the requested modifications, but I 
> didn't get any feedback if this patch series is fine or it needs 
> something more to have an ACK.

I do not knwo, I don't see anything my my review queue, sorry.

> If some feedback was provided, please accept my apologies. My email 
> account was having some issues some time ago and I might not have 
> received some emails.

Check the archives please, that's what they are there for :)

greg k-h

RE: [PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[Gustavo Pimentel]

On Tue, Feb 2, 2021 at 10:43:3, Greg Kroah-Hartman 
<gregkh@linuxfoundation.org> wrote:

> On Tue, Feb 02, 2021 at 10:38:29AM +0000, Gustavo Pimentel wrote:
> > On Tue, Feb 2, 2021 at 10:11:21, Greg Kroah-Hartman 
> > <gregkh@linuxfoundation.org> wrote:
> > 
> > > On Tue, Feb 02, 2021 at 08:51:10AM +0000, Gustavo Pimentel wrote:
> > > > Just a kindly reminder.
> > > 
> > > reminder of what?
> > 
> > To review the patch set. I've done the requested modifications, but I 
> > didn't get any feedback if this patch series is fine or it needs 
> > something more to have an ACK.
> 
> I do not knwo, I don't see anything my my review queue, sorry.

I've resend the patch series. Let's see if appears now 😊

> 
> > If some feedback was provided, please accept my apologies. My email 
> > account was having some issues some time ago and I might not have 
> > received some emails.
> 
> Check the archives please, that's what they are there for :)

I have just checked, there isn't any feedback besides yours and Arnd 
Bergmann.

Thank you Greg.

-Gustavo

> 
> greg k-h

Re: [PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[Greg Kroah-Hartman]

On Tue, Feb 02, 2021 at 04:58:50PM +0000, Gustavo Pimentel wrote:
> On Tue, Feb 2, 2021 at 10:43:3, Greg Kroah-Hartman 
> <gregkh@linuxfoundation.org> wrote:
> 
> > On Tue, Feb 02, 2021 at 10:38:29AM +0000, Gustavo Pimentel wrote:
> > > On Tue, Feb 2, 2021 at 10:11:21, Greg Kroah-Hartman 
> > > <gregkh@linuxfoundation.org> wrote:
> > > 
> > > > On Tue, Feb 02, 2021 at 08:51:10AM +0000, Gustavo Pimentel wrote:
> > > > > Just a kindly reminder.
> > > > 
> > > > reminder of what?
> > > 
> > > To review the patch set. I've done the requested modifications, but I 
> > > didn't get any feedback if this patch series is fine or it needs 
> > > something more to have an ACK.
> > 
> > I do not knwo, I don't see anything my my review queue, sorry.
> 
> I've resend the patch series. Let's see if appears now 😊
> 
> > 
> > > If some feedback was provided, please accept my apologies. My email 
> > > account was having some issues some time ago and I might not have 
> > > received some emails.
> > 
> > Check the archives please, that's what they are there for :)
> 
> I have just checked, there isn't any feedback besides yours and Arnd 
> Bergmann.

Did you incorporate our review?

greg k-h

RE: [PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[Gustavo Pimentel]

On Tue, Feb 2, 2021 at 17:8:21, Greg Kroah-Hartman 
<gregkh@linuxfoundation.org> wrote:

> On Tue, Feb 02, 2021 at 04:58:50PM +0000, Gustavo Pimentel wrote:
> > On Tue, Feb 2, 2021 at 10:43:3, Greg Kroah-Hartman 
> > <gregkh@linuxfoundation.org> wrote:
> > 
> > > On Tue, Feb 02, 2021 at 10:38:29AM +0000, Gustavo Pimentel wrote:
> > > > On Tue, Feb 2, 2021 at 10:11:21, Greg Kroah-Hartman 
> > > > <gregkh@linuxfoundation.org> wrote:
> > > > 
> > > > > On Tue, Feb 02, 2021 at 08:51:10AM +0000, Gustavo Pimentel wrote:
> > > > > > Just a kindly reminder.
> > > > > 
> > > > > reminder of what?
> > > > 
> > > > To review the patch set. I've done the requested modifications, but I 
> > > > didn't get any feedback if this patch series is fine or it needs 
> > > > something more to have an ACK.
> > > 
> > > I do not knwo, I don't see anything my my review queue, sorry.
> > 
> > I've resend the patch series. Let's see if appears now 😊
> > 
> > > 
> > > > If some feedback was provided, please accept my apologies. My email 
> > > > account was having some issues some time ago and I might not have 
> > > > received some emails.
> > > 
> > > Check the archives please, that's what they are there for :)
> > 
> > I have just checked, there isn't any feedback besides yours and Arnd 
> > Bergmann.
> 
> Did you incorporate our review?

Yes, I did. The driver initially was using the modules parameters, and 
based on your feedback I changed to sysfs using other drivers' 
implementation as a reference. I also the driver structure changed to use 
macros instead of bitfields.

> 
> greg k-h