linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
@ 2018-10-03 15:11 Balakrishna Godavarthi
  2018-10-03 16:56 ` Marcel Holtmann
  0 siblings, 1 reply; 11+ messages in thread
From: Balakrishna Godavarthi @ 2018-10-03 15:11 UTC (permalink / raw)
  To: marcel, johan.hedberg
  Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
	Balakrishna Godavarthi, Harish Bandi

This patch will prevent error messages splashing on console.

[   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804

QCA wcn3990 will send the debug logs in the form of ACL packets.
While decoding packet in qca_recv(), marking the received debug log
packet as diagnostic packet.

Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
v2: 
  * Addressed reviewer comments.
v1: 
  * initial patch
---
 drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d98ed0442201..63ac3c6b4149 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -63,6 +63,10 @@
 /* susclk rate */
 #define SUSCLK_RATE_32KHZ	32768
 
+/* Controller debug log header */
+#define QCA_DEBUG_HDR_MSB	0xDC
+#define QCA_DEBUG_HDR_LSB	0x2E
+
 /* HCI_IBS transmit side sleep protocol states */
 enum tx_ibs_states {
 	HCI_IBS_TX_ASLEEP,
@@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
 	return 0;
 }
 
+static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	/* We receive debug logs from chip as an ACL packets.
+	 * Instead of sending the data to ACL to decode the
+	 * received data, we are pushing them to the above layers
+	 * as a diagnostic packet.
+	 */
+	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
+	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
+		return hci_recv_diag(hdev, skb);
+
+	return hci_recv_frame(hdev, skb);
+}
+
 #define QCA_IBS_SLEEP_IND_EVENT \
 	.type = HCI_IBS_SLEEP_IND, \
 	.hlen = 0, \
@@ -871,7 +889,7 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
 	.maxlen = HCI_MAX_IBS_SIZE
 
 static const struct h4_recv_pkt qca_recv_pkts[] = {
-	{ H4_RECV_ACL,             .recv = hci_recv_frame    },
+	{ H4_RECV_ACL,             .recv = qca_recv_acl_data },
 	{ H4_RECV_SCO,             .recv = hci_recv_frame    },
 	{ H4_RECV_EVENT,           .recv = hci_recv_frame    },
 	{ QCA_IBS_WAKE_IND_EVENT,  .recv = qca_ibs_wake_ind  },
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
  2018-10-03 15:11 [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs Balakrishna Godavarthi
@ 2018-10-03 16:56 ` Marcel Holtmann
  2018-10-16 14:02   ` Balakrishna Godavarthi
  0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2018-10-03 16:56 UTC (permalink / raw)
  To: Balakrishna Godavarthi
  Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
	linux-bluetooth, hemantg, linux-arm-msm, Harish Bandi

Hi Balakrishna,

> This patch will prevent error messages splashing on console.
> 
> [   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
> [   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
> [   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
> [   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
> 
> QCA wcn3990 will send the debug logs in the form of ACL packets.
> While decoding packet in qca_recv(), marking the received debug log
> packet as diagnostic packet.
> 
> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> ---
> v2: 
>  * Addressed reviewer comments.
> v1: 
>  * initial patch
> ---
> drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
> 1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index d98ed0442201..63ac3c6b4149 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -63,6 +63,10 @@
> /* susclk rate */
> #define SUSCLK_RATE_32KHZ	32768
> 
> +/* Controller debug log header */
> +#define QCA_DEBUG_HDR_MSB	0xDC
> +#define QCA_DEBUG_HDR_LSB	0x2E
> +

since this is actually the ACL handle, why not call it QCA_DEBUG_HANDLE.

> /* HCI_IBS transmit side sleep protocol states */
> enum tx_ibs_states {
> 	HCI_IBS_TX_ASLEEP,
> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
> 	return 0;
> }
> 
> +static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
> +{
> +	/* We receive debug logs from chip as an ACL packets.
> +	 * Instead of sending the data to ACL to decode the
> +	 * received data, we are pushing them to the above layers
> +	 * as a diagnostic packet.
> +	 */
> +	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
> +	    (skb->data[1] == QCA_DEBUG_HDR_LSB))

Skip the individual () since they are not needed. Also the skb->len check is not needed since the H4_RECV_ACL already ensures the proper length of the header.

And just use get_unaligned_le16(skb->data) here (or be16 if that is the byte order).

> +		return hci_recv_diag(hdev, skb);

Is there any reason to keep the 4 octets hci_acl_hdr with this SKB? Or would it be better to be stripped off. Mainly asking are they any other magic handles that we might want to feed through the diag channel?

> +
> +	return hci_recv_frame(hdev, skb);
> +}
> +

Regards

Marcel


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
  2018-10-03 16:56 ` Marcel Holtmann
@ 2018-10-16 14:02   ` Balakrishna Godavarthi
  2018-10-16 14:35     ` Marcel Holtmann
  0 siblings, 1 reply; 11+ messages in thread
From: Balakrishna Godavarthi @ 2018-10-16 14:02 UTC (permalink / raw)
  To: Marcel Holtmann
  Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
	linux-bluetooth, hemantg, linux-arm-msm, Harish Bandi

Hi Marcel,

On 2018-10-03 22:26, Marcel Holtmann wrote:
> Hi Balakrishna,
> 
>> This patch will prevent error messages splashing on console.
>> 
>> [   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL 
>> packet for unknown connection handle 3804
>> [   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL 
>> packet for unknown connection handle 3804
>> [   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL 
>> packet for unknown connection handle 3804
>> [   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL 
>> packet for unknown connection handle 3804
>> 
>> QCA wcn3990 will send the debug logs in the form of ACL packets.
>> While decoding packet in qca_recv(), marking the received debug log
>> packet as diagnostic packet.
>> 
>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>> ---
>> v2:
>>  * Addressed reviewer comments.
>> v1:
>>  * initial patch
>> ---
>> drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
>> 1 file changed, 19 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index d98ed0442201..63ac3c6b4149 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -63,6 +63,10 @@
>> /* susclk rate */
>> #define SUSCLK_RATE_32KHZ	32768
>> 
>> +/* Controller debug log header */
>> +#define QCA_DEBUG_HDR_MSB	0xDC
>> +#define QCA_DEBUG_HDR_LSB	0x2E
>> +
> 
> since this is actually the ACL handle, why not call it 
> QCA_DEBUG_HANDLE.
> 

[Bala]: will update.

>> /* HCI_IBS transmit side sleep protocol states */
>> enum tx_ibs_states {
>> 	HCI_IBS_TX_ASLEEP,
>> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, 
>> struct sk_buff *skb)
>> 	return 0;
>> }
>> 
>> +static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff 
>> *skb)
>> +{
>> +	/* We receive debug logs from chip as an ACL packets.
>> +	 * Instead of sending the data to ACL to decode the
>> +	 * received data, we are pushing them to the above layers
>> +	 * as a diagnostic packet.
>> +	 */
>> +	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
>> +	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
> 
> Skip the individual () since they are not needed. Also the skb->len
> check is not needed since the H4_RECV_ACL already ensures the proper
> length of the header.
> 
> And just use get_unaligned_le16(skb->data) here (or be16 if that is
> the byte order).
> 
[Bala] : will update condition with _le16()

>> +		return hci_recv_diag(hdev, skb);
> 
> Is there any reason to keep the 4 octets hci_acl_hdr with this SKB? Or
> would it be better to be stripped off. Mainly asking are they any
> other magic handles that we might want to feed through the diag
> channel?
> 

[Bala]: yes we need header in the stack, to  differentiate between 
actual diagnostic packet and debug packet.


>> +
>> +	return hci_recv_frame(hdev, skb);
>> +}
>> +
> 
> Regards
> 
> Marcel

-- 
Regards
Balakrishna.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
  2018-10-16 14:02   ` Balakrishna Godavarthi
@ 2018-10-16 14:35     ` Marcel Holtmann
  2018-10-16 14:56       ` Balakrishna Godavarthi
  0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2018-10-16 14:35 UTC (permalink / raw)
  To: Balakrishna Godavarthi
  Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
	linux-bluetooth, hemantg, linux-arm-msm, Harish Bandi

Hi Balakrishna,

>>> This patch will prevent error messages splashing on console.
>>> [   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>> [   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>> [   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>> [   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>> QCA wcn3990 will send the debug logs in the form of ACL packets.
>>> While decoding packet in qca_recv(), marking the received debug log
>>> packet as diagnostic packet.
>>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>>> ---
>>> v2:
>>> * Addressed reviewer comments.
>>> v1:
>>> * initial patch
>>> ---
>>> drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
>>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>>> index d98ed0442201..63ac3c6b4149 100644
>>> --- a/drivers/bluetooth/hci_qca.c
>>> +++ b/drivers/bluetooth/hci_qca.c
>>> @@ -63,6 +63,10 @@
>>> /* susclk rate */
>>> #define SUSCLK_RATE_32KHZ	32768
>>> +/* Controller debug log header */
>>> +#define QCA_DEBUG_HDR_MSB	0xDC
>>> +#define QCA_DEBUG_HDR_LSB	0x2E
>>> +
>> since this is actually the ACL handle, why not call it QCA_DEBUG_HANDLE.
> 
> [Bala]: will update.
> 
>>> /* HCI_IBS transmit side sleep protocol states */
>>> enum tx_ibs_states {
>>> 	HCI_IBS_TX_ASLEEP,
>>> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
>>> 	return 0;
>>> }
>>> +static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
>>> +{
>>> +	/* We receive debug logs from chip as an ACL packets.
>>> +	 * Instead of sending the data to ACL to decode the
>>> +	 * received data, we are pushing them to the above layers
>>> +	 * as a diagnostic packet.
>>> +	 */
>>> +	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
>>> +	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
>> Skip the individual () since they are not needed. Also the skb->len
>> check is not needed since the H4_RECV_ACL already ensures the proper
>> length of the header.
>> And just use get_unaligned_le16(skb->data) here (or be16 if that is
>> the byte order).
> [Bala] : will update condition with _le16()
> 
>>> +		return hci_recv_diag(hdev, skb);
>> Is there any reason to keep the 4 octets hci_acl_hdr with this SKB? Or
>> would it be better to be stripped off. Mainly asking are they any
>> other magic handles that we might want to feed through the diag
>> channel?
> 
> [Bala]: yes we need header in the stack, to  differentiate between actual diagnostic packet and debug packet.

please explain that a bit more. There is just one debug handle or do you have more special handles?

Regards

Marcel


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
  2018-10-16 14:35     ` Marcel Holtmann
@ 2018-10-16 14:56       ` Balakrishna Godavarthi
  2018-10-16 15:09         ` Marcel Holtmann
  0 siblings, 1 reply; 11+ messages in thread
From: Balakrishna Godavarthi @ 2018-10-16 14:56 UTC (permalink / raw)
  To: Marcel Holtmann
  Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
	linux-bluetooth, hemantg, linux-arm-msm, Harish Bandi

Hi Marcel,

On 2018-10-16 20:05, Marcel Holtmann wrote:
> Hi Balakrishna,
> 
>>>> This patch will prevent error messages splashing on console.
>>>> [   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL 
>>>> packet for unknown connection handle 3804
>>>> [   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL 
>>>> packet for unknown connection handle 3804
>>>> [   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL 
>>>> packet for unknown connection handle 3804
>>>> [   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL 
>>>> packet for unknown connection handle 3804
>>>> QCA wcn3990 will send the debug logs in the form of ACL packets.
>>>> While decoding packet in qca_recv(), marking the received debug log
>>>> packet as diagnostic packet.
>>>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>>>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>>>> ---
>>>> v2:
>>>> * Addressed reviewer comments.
>>>> v1:
>>>> * initial patch
>>>> ---
>>>> drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
>>>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>>> diff --git a/drivers/bluetooth/hci_qca.c 
>>>> b/drivers/bluetooth/hci_qca.c
>>>> index d98ed0442201..63ac3c6b4149 100644
>>>> --- a/drivers/bluetooth/hci_qca.c
>>>> +++ b/drivers/bluetooth/hci_qca.c
>>>> @@ -63,6 +63,10 @@
>>>> /* susclk rate */
>>>> #define SUSCLK_RATE_32KHZ	32768
>>>> +/* Controller debug log header */
>>>> +#define QCA_DEBUG_HDR_MSB	0xDC
>>>> +#define QCA_DEBUG_HDR_LSB	0x2E
>>>> +
>>> since this is actually the ACL handle, why not call it 
>>> QCA_DEBUG_HANDLE.
>> 
>> [Bala]: will update.
>> 
>>>> /* HCI_IBS transmit side sleep protocol states */
>>>> enum tx_ibs_states {
>>>> 	HCI_IBS_TX_ASLEEP,
>>>> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev 
>>>> *hdev, struct sk_buff *skb)
>>>> 	return 0;
>>>> }
>>>> +static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff 
>>>> *skb)
>>>> +{
>>>> +	/* We receive debug logs from chip as an ACL packets.
>>>> +	 * Instead of sending the data to ACL to decode the
>>>> +	 * received data, we are pushing them to the above layers
>>>> +	 * as a diagnostic packet.
>>>> +	 */
>>>> +	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
>>>> +	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
>>> Skip the individual () since they are not needed. Also the skb->len
>>> check is not needed since the H4_RECV_ACL already ensures the proper
>>> length of the header.
>>> And just use get_unaligned_le16(skb->data) here (or be16 if that is
>>> the byte order).
>> [Bala] : will update condition with _le16()
>> 
>>>> +		return hci_recv_diag(hdev, skb);
>>> Is there any reason to keep the 4 octets hci_acl_hdr with this SKB? 
>>> Or
>>> would it be better to be stripped off. Mainly asking are they any
>>> other magic handles that we might want to feed through the diag
>>> channel?
>> 
>> [Bala]: yes we need header in the stack, to  differentiate between 
>> actual diagnostic packet and debug packet.
> 
> please explain that a bit more. There is just one debug handle or do
> you have more special handles?
> 
[Bala]: Qualcomm bluetooth chip sends the debug data of the chip with 
ACL header along with fixed handler i.e. 0x2edc..
         this handler is dedicated for the debug logs sent by qcomm bt 
chip and it is not used for any other connection handlers.
         so here we are checking this handler and sending to stack as an
         a diagnostic packet.. so during the log capture we will read 
this diagnostic packet and handler,to decode the debug packet.
         that is the  reason why we don't remove handler during condition 
check,  in future, if qualcomm chip sends diagnostic packet,
         then this will create an problem to upper layers to decide 
whether it is an diagnostic packet or the debug packet.

        this is how we do it.
       if( diagnostic packet && handler == 0x2edc)
          treat them as an ddebug packet
       else
           treat as diagnostic packet.

> Regards
> 
> Marcel

-- 
Regards
Balakrishna.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
  2018-10-16 14:56       ` Balakrishna Godavarthi
@ 2018-10-16 15:09         ` Marcel Holtmann
  2018-10-16 15:19           ` Balakrishna Godavarthi
  0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2018-10-16 15:09 UTC (permalink / raw)
  To: Balakrishna Godavarthi
  Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
	linux-bluetooth, hemantg, linux-arm-msm, Harish Bandi

Hi Balakrishna,

>>>>> This patch will prevent error messages splashing on console.
>>>>> [   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>> [   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>> [   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>> [   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>> QCA wcn3990 will send the debug logs in the form of ACL packets.
>>>>> While decoding packet in qca_recv(), marking the received debug log
>>>>> packet as diagnostic packet.
>>>>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>>>>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>>>>> ---
>>>>> v2:
>>>>> * Addressed reviewer comments.
>>>>> v1:
>>>>> * initial patch
>>>>> ---
>>>>> drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
>>>>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>>>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>>>>> index d98ed0442201..63ac3c6b4149 100644
>>>>> --- a/drivers/bluetooth/hci_qca.c
>>>>> +++ b/drivers/bluetooth/hci_qca.c
>>>>> @@ -63,6 +63,10 @@
>>>>> /* susclk rate */
>>>>> #define SUSCLK_RATE_32KHZ	32768
>>>>> +/* Controller debug log header */
>>>>> +#define QCA_DEBUG_HDR_MSB	0xDC
>>>>> +#define QCA_DEBUG_HDR_LSB	0x2E
>>>>> +
>>>> since this is actually the ACL handle, why not call it QCA_DEBUG_HANDLE.
>>> [Bala]: will update.
>>>>> /* HCI_IBS transmit side sleep protocol states */
>>>>> enum tx_ibs_states {
>>>>> 	HCI_IBS_TX_ASLEEP,
>>>>> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
>>>>> 	return 0;
>>>>> }
>>>>> +static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
>>>>> +{
>>>>> +	/* We receive debug logs from chip as an ACL packets.
>>>>> +	 * Instead of sending the data to ACL to decode the
>>>>> +	 * received data, we are pushing them to the above layers
>>>>> +	 * as a diagnostic packet.
>>>>> +	 */
>>>>> +	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
>>>>> +	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
>>>> Skip the individual () since they are not needed. Also the skb->len
>>>> check is not needed since the H4_RECV_ACL already ensures the proper
>>>> length of the header.
>>>> And just use get_unaligned_le16(skb->data) here (or be16 if that is
>>>> the byte order).
>>> [Bala] : will update condition with _le16()
>>>>> +		return hci_recv_diag(hdev, skb);
>>>> Is there any reason to keep the 4 octets hci_acl_hdr with this SKB? Or
>>>> would it be better to be stripped off. Mainly asking are they any
>>>> other magic handles that we might want to feed through the diag
>>>> channel?
>>> [Bala]: yes we need header in the stack, to  differentiate between actual diagnostic packet and debug packet.
>> please explain that a bit more. There is just one debug handle or do
>> you have more special handles?
> [Bala]: Qualcomm bluetooth chip sends the debug data of the chip with ACL header along with fixed handler i.e. 0x2edc..
>        this handler is dedicated for the debug logs sent by qcomm bt chip and it is not used for any other connection handlers.
>        so here we are checking this handler and sending to stack as an
>        a diagnostic packet.. so during the log capture we will read this diagnostic packet and handler,to decode the debug packet.
>        that is the  reason why we don't remove handler during condition check,  in future, if qualcomm chip sends diagnostic packet,
>        then this will create an problem to upper layers to decide whether it is an diagnostic packet or the debug packet.
> 
>       this is how we do it.
>      if( diagnostic packet && handler == 0x2edc)
>         treat them as an ddebug packet
>      else
>          treat as diagnostic packet.
> 

let me interpret this answer. Besides debug handle 0x2edc, there are other handles that are not connection handles. And in future updates you want to send these handles also via hci_recv_diag channel.

Regards

Marcel


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
  2018-10-16 15:09         ` Marcel Holtmann
@ 2018-10-16 15:19           ` Balakrishna Godavarthi
  2018-10-16 15:31             ` Marcel Holtmann
  0 siblings, 1 reply; 11+ messages in thread
From: Balakrishna Godavarthi @ 2018-10-16 15:19 UTC (permalink / raw)
  To: Marcel Holtmann
  Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
	linux-bluetooth, hemantg, linux-arm-msm, Harish Bandi

Hi Marcel,

On 2018-10-16 20:39, Marcel Holtmann wrote:
> Hi Balakrishna,
> 
>>>>>> This patch will prevent error messages splashing on console.
>>>>>> [   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: 
>>>>>> ACL packet for unknown connection handle 3804
>>>>>> [   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: 
>>>>>> ACL packet for unknown connection handle 3804
>>>>>> [   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: 
>>>>>> ACL packet for unknown connection handle 3804
>>>>>> [   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: 
>>>>>> ACL packet for unknown connection handle 3804
>>>>>> QCA wcn3990 will send the debug logs in the form of ACL packets.
>>>>>> While decoding packet in qca_recv(), marking the received debug 
>>>>>> log
>>>>>> packet as diagnostic packet.
>>>>>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>>>>>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>>>>>> ---
>>>>>> v2:
>>>>>> * Addressed reviewer comments.
>>>>>> v1:
>>>>>> * initial patch
>>>>>> ---
>>>>>> drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
>>>>>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>>>>> diff --git a/drivers/bluetooth/hci_qca.c 
>>>>>> b/drivers/bluetooth/hci_qca.c
>>>>>> index d98ed0442201..63ac3c6b4149 100644
>>>>>> --- a/drivers/bluetooth/hci_qca.c
>>>>>> +++ b/drivers/bluetooth/hci_qca.c
>>>>>> @@ -63,6 +63,10 @@
>>>>>> /* susclk rate */
>>>>>> #define SUSCLK_RATE_32KHZ	32768
>>>>>> +/* Controller debug log header */
>>>>>> +#define QCA_DEBUG_HDR_MSB	0xDC
>>>>>> +#define QCA_DEBUG_HDR_LSB	0x2E
>>>>>> +
>>>>> since this is actually the ACL handle, why not call it 
>>>>> QCA_DEBUG_HANDLE.
>>>> [Bala]: will update.
>>>>>> /* HCI_IBS transmit side sleep protocol states */
>>>>>> enum tx_ibs_states {
>>>>>> 	HCI_IBS_TX_ASLEEP,
>>>>>> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev 
>>>>>> *hdev, struct sk_buff *skb)
>>>>>> 	return 0;
>>>>>> }
>>>>>> +static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff 
>>>>>> *skb)
>>>>>> +{
>>>>>> +	/* We receive debug logs from chip as an ACL packets.
>>>>>> +	 * Instead of sending the data to ACL to decode the
>>>>>> +	 * received data, we are pushing them to the above layers
>>>>>> +	 * as a diagnostic packet.
>>>>>> +	 */
>>>>>> +	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
>>>>>> +	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
>>>>> Skip the individual () since they are not needed. Also the skb->len
>>>>> check is not needed since the H4_RECV_ACL already ensures the 
>>>>> proper
>>>>> length of the header.
>>>>> And just use get_unaligned_le16(skb->data) here (or be16 if that is
>>>>> the byte order).
>>>> [Bala] : will update condition with _le16()
>>>>>> +		return hci_recv_diag(hdev, skb);
>>>>> Is there any reason to keep the 4 octets hci_acl_hdr with this SKB? 
>>>>> Or
>>>>> would it be better to be stripped off. Mainly asking are they any
>>>>> other magic handles that we might want to feed through the diag
>>>>> channel?
>>>> [Bala]: yes we need header in the stack, to  differentiate between 
>>>> actual diagnostic packet and debug packet.
>>> please explain that a bit more. There is just one debug handle or do
>>> you have more special handles?
>> [Bala]: Qualcomm bluetooth chip sends the debug data of the chip with 
>> ACL header along with fixed handler i.e. 0x2edc..
>>        this handler is dedicated for the debug logs sent by qcomm bt 
>> chip and it is not used for any other connection handlers.
>>        so here we are checking this handler and sending to stack as an
>>        a diagnostic packet.. so during the log capture we will read 
>> this diagnostic packet and handler,to decode the debug packet.
>>        that is the  reason why we don't remove handler during 
>> condition check,  in future, if qualcomm chip sends diagnostic packet,
>>        then this will create an problem to upper layers to decide 
>> whether it is an diagnostic packet or the debug packet.
>> 
>>       this is how we do it.
>>      if( diagnostic packet && handler == 0x2edc)
>>         treat them as an ddebug packet
>>      else
>>          treat as diagnostic packet.
>> 
> 
> let me interpret this answer. Besides debug handle 0x2edc, there are
> other handles that are not connection handles. And in future updates
> you want to send these handles also via hci_recv_diag channel.
> 

No, 0x2edc is an dedicated handle for debug logs, i don't really think 
they we will have an new handle coming up.
this is only the handle we will send via hci_recv_diag channel to the 
stack.

what i mean in my previous answer was,we don't to remove debug 
connection handle from the skb, because in the stack
we look for a diagnostic packet and debug connection handler to decode 
the message.

> Regards
> 
> Marcel

-- 
Regards
Balakrishna.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
  2018-10-16 15:19           ` Balakrishna Godavarthi
@ 2018-10-16 15:31             ` Marcel Holtmann
  2018-10-16 15:43               ` Balakrishna Godavarthi
  0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2018-10-16 15:31 UTC (permalink / raw)
  To: Balakrishna Godavarthi
  Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
	linux-bluetooth, hemantg, linux-arm-msm, Harish Bandi

Hi Balakrishna,

>>>>>>> This patch will prevent error messages splashing on console.
>>>>>>> [   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>>>> [   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>>>> [   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>>>> [   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>>>> QCA wcn3990 will send the debug logs in the form of ACL packets.
>>>>>>> While decoding packet in qca_recv(), marking the received debug log
>>>>>>> packet as diagnostic packet.
>>>>>>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>>>>>>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>>>>>>> ---
>>>>>>> v2:
>>>>>>> * Addressed reviewer comments.
>>>>>>> v1:
>>>>>>> * initial patch
>>>>>>> ---
>>>>>>> drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
>>>>>>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>>>>>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>>>>>>> index d98ed0442201..63ac3c6b4149 100644
>>>>>>> --- a/drivers/bluetooth/hci_qca.c
>>>>>>> +++ b/drivers/bluetooth/hci_qca.c
>>>>>>> @@ -63,6 +63,10 @@
>>>>>>> /* susclk rate */
>>>>>>> #define SUSCLK_RATE_32KHZ	32768
>>>>>>> +/* Controller debug log header */
>>>>>>> +#define QCA_DEBUG_HDR_MSB	0xDC
>>>>>>> +#define QCA_DEBUG_HDR_LSB	0x2E
>>>>>>> +
>>>>>> since this is actually the ACL handle, why not call it QCA_DEBUG_HANDLE.
>>>>> [Bala]: will update.
>>>>>>> /* HCI_IBS transmit side sleep protocol states */
>>>>>>> enum tx_ibs_states {
>>>>>>> 	HCI_IBS_TX_ASLEEP,
>>>>>>> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
>>>>>>> 	return 0;
>>>>>>> }
>>>>>>> +static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
>>>>>>> +{
>>>>>>> +	/* We receive debug logs from chip as an ACL packets.
>>>>>>> +	 * Instead of sending the data to ACL to decode the
>>>>>>> +	 * received data, we are pushing them to the above layers
>>>>>>> +	 * as a diagnostic packet.
>>>>>>> +	 */
>>>>>>> +	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
>>>>>>> +	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
>>>>>> Skip the individual () since they are not needed. Also the skb->len
>>>>>> check is not needed since the H4_RECV_ACL already ensures the proper
>>>>>> length of the header.
>>>>>> And just use get_unaligned_le16(skb->data) here (or be16 if that is
>>>>>> the byte order).
>>>>> [Bala] : will update condition with _le16()
>>>>>>> +		return hci_recv_diag(hdev, skb);
>>>>>> Is there any reason to keep the 4 octets hci_acl_hdr with this SKB? Or
>>>>>> would it be better to be stripped off. Mainly asking are they any
>>>>>> other magic handles that we might want to feed through the diag
>>>>>> channel?
>>>>> [Bala]: yes we need header in the stack, to  differentiate between actual diagnostic packet and debug packet.
>>>> please explain that a bit more. There is just one debug handle or do
>>>> you have more special handles?
>>> [Bala]: Qualcomm bluetooth chip sends the debug data of the chip with ACL header along with fixed handler i.e. 0x2edc..
>>>       this handler is dedicated for the debug logs sent by qcomm bt chip and it is not used for any other connection handlers.
>>>       so here we are checking this handler and sending to stack as an
>>>       a diagnostic packet.. so during the log capture we will read this diagnostic packet and handler,to decode the debug packet.
>>>       that is the  reason why we don't remove handler during condition check,  in future, if qualcomm chip sends diagnostic packet,
>>>       then this will create an problem to upper layers to decide whether it is an diagnostic packet or the debug packet.
>>>      this is how we do it.
>>>     if( diagnostic packet && handler == 0x2edc)
>>>        treat them as an ddebug packet
>>>     else
>>>         treat as diagnostic packet.
>> let me interpret this answer. Besides debug handle 0x2edc, there are
>> other handles that are not connection handles. And in future updates
>> you want to send these handles also via hci_recv_diag channel.
> 
> No, 0x2edc is an dedicated handle for debug logs, i don't really think they we will have an new handle coming up.
> this is only the handle we will send via hci_recv_diag channel to the stack.
> 
> what i mean in my previous answer was,we don't to remove debug connection handle from the skb, because in the stack
> we look for a diagnostic packet and debug connection handler to decode the message.

if 0x2edc is the only magic connection handle, then lets strip the SKB of the ACL packet header and send only the payload to via hci_recv_diag. All the information is present and you would be just sending the ACL packet header for no reason. The diagnostic packets get a separate channel on the monitor interface.

Regards

Marcel


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
  2018-10-16 15:31             ` Marcel Holtmann
@ 2018-10-16 15:43               ` Balakrishna Godavarthi
  2018-10-18  7:58                 ` Marcel Holtmann
  0 siblings, 1 reply; 11+ messages in thread
From: Balakrishna Godavarthi @ 2018-10-16 15:43 UTC (permalink / raw)
  To: Marcel Holtmann
  Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
	linux-bluetooth, hemantg, linux-arm-msm, Harish Bandi

Hi Marcel,

On 2018-10-16 21:01, Marcel Holtmann wrote:
> Hi Balakrishna,
> 
>>>>>>>> This patch will prevent error messages splashing on console.
>>>>>>>> [   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: 
>>>>>>>> ACL packet for unknown connection handle 3804
>>>>>>>> [   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: 
>>>>>>>> ACL packet for unknown connection handle 3804
>>>>>>>> [   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: 
>>>>>>>> ACL packet for unknown connection handle 3804
>>>>>>>> [   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: 
>>>>>>>> ACL packet for unknown connection handle 3804
>>>>>>>> QCA wcn3990 will send the debug logs in the form of ACL packets.
>>>>>>>> While decoding packet in qca_recv(), marking the received debug 
>>>>>>>> log
>>>>>>>> packet as diagnostic packet.
>>>>>>>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>>>>>>>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>>>>>>>> ---
>>>>>>>> v2:
>>>>>>>> * Addressed reviewer comments.
>>>>>>>> v1:
>>>>>>>> * initial patch
>>>>>>>> ---
>>>>>>>> drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
>>>>>>>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>>>>>>> diff --git a/drivers/bluetooth/hci_qca.c 
>>>>>>>> b/drivers/bluetooth/hci_qca.c
>>>>>>>> index d98ed0442201..63ac3c6b4149 100644
>>>>>>>> --- a/drivers/bluetooth/hci_qca.c
>>>>>>>> +++ b/drivers/bluetooth/hci_qca.c
>>>>>>>> @@ -63,6 +63,10 @@
>>>>>>>> /* susclk rate */
>>>>>>>> #define SUSCLK_RATE_32KHZ	32768
>>>>>>>> +/* Controller debug log header */
>>>>>>>> +#define QCA_DEBUG_HDR_MSB	0xDC
>>>>>>>> +#define QCA_DEBUG_HDR_LSB	0x2E
>>>>>>>> +
>>>>>>> since this is actually the ACL handle, why not call it 
>>>>>>> QCA_DEBUG_HANDLE.
>>>>>> [Bala]: will update.
>>>>>>>> /* HCI_IBS transmit side sleep protocol states */
>>>>>>>> enum tx_ibs_states {
>>>>>>>> 	HCI_IBS_TX_ASLEEP,
>>>>>>>> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev 
>>>>>>>> *hdev, struct sk_buff *skb)
>>>>>>>> 	return 0;
>>>>>>>> }
>>>>>>>> +static int qca_recv_acl_data(struct hci_dev *hdev, struct 
>>>>>>>> sk_buff *skb)
>>>>>>>> +{
>>>>>>>> +	/* We receive debug logs from chip as an ACL packets.
>>>>>>>> +	 * Instead of sending the data to ACL to decode the
>>>>>>>> +	 * received data, we are pushing them to the above layers
>>>>>>>> +	 * as a diagnostic packet.
>>>>>>>> +	 */
>>>>>>>> +	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
>>>>>>>> +	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
>>>>>>> Skip the individual () since they are not needed. Also the 
>>>>>>> skb->len
>>>>>>> check is not needed since the H4_RECV_ACL already ensures the 
>>>>>>> proper
>>>>>>> length of the header.
>>>>>>> And just use get_unaligned_le16(skb->data) here (or be16 if that 
>>>>>>> is
>>>>>>> the byte order).
>>>>>> [Bala] : will update condition with _le16()
>>>>>>>> +		return hci_recv_diag(hdev, skb);
>>>>>>> Is there any reason to keep the 4 octets hci_acl_hdr with this 
>>>>>>> SKB? Or
>>>>>>> would it be better to be stripped off. Mainly asking are they any
>>>>>>> other magic handles that we might want to feed through the diag
>>>>>>> channel?
>>>>>> [Bala]: yes we need header in the stack, to  differentiate between 
>>>>>> actual diagnostic packet and debug packet.
>>>>> please explain that a bit more. There is just one debug handle or 
>>>>> do
>>>>> you have more special handles?
>>>> [Bala]: Qualcomm bluetooth chip sends the debug data of the chip 
>>>> with ACL header along with fixed handler i.e. 0x2edc..
>>>>       this handler is dedicated for the debug logs sent by qcomm bt 
>>>> chip and it is not used for any other connection handlers.
>>>>       so here we are checking this handler and sending to stack as 
>>>> an
>>>>       a diagnostic packet.. so during the log capture we will read 
>>>> this diagnostic packet and handler,to decode the debug packet.
>>>>       that is the  reason why we don't remove handler during 
>>>> condition check,  in future, if qualcomm chip sends diagnostic 
>>>> packet,
>>>>       then this will create an problem to upper layers to decide 
>>>> whether it is an diagnostic packet or the debug packet.
>>>>      this is how we do it.
>>>>     if( diagnostic packet && handler == 0x2edc)
>>>>        treat them as an ddebug packet
>>>>     else
>>>>         treat as diagnostic packet.
>>> let me interpret this answer. Besides debug handle 0x2edc, there are
>>> other handles that are not connection handles. And in future updates
>>> you want to send these handles also via hci_recv_diag channel.
>> 
>> No, 0x2edc is an dedicated handle for debug logs, i don't really think 
>> they we will have an new handle coming up.
>> this is only the handle we will send via hci_recv_diag channel to the 
>> stack.
>> 
>> what i mean in my previous answer was,we don't to remove debug 
>> connection handle from the skb, because in the stack
>> we look for a diagnostic packet and debug connection handler to decode 
>> the message.
> 
> if 0x2edc is the only magic connection handle, then lets strip the SKB
> of the ACL packet header and send only the payload to via
> hci_recv_diag. All the information is present and you would be just
> sending the ACL packet header for no reason. The diagnostic packets
> get a separate channel on the monitor interface.
> 
[Bala]: even we the felt the same to remove ACL packet header before 
sending to stack via an diagnostic channel,

         here is the case, let us assume that an in future qaulcomm bt 
chip want to send diagnosis data as a diagnostic packet.
         if we remove ACL header for ACL debug packet, how can the stack 
differentiate between debug packet and diagnosis packet.


> Regards
> 
> Marcel

-- 
Regards
Balakrishna.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
  2018-10-16 15:43               ` Balakrishna Godavarthi
@ 2018-10-18  7:58                 ` Marcel Holtmann
  2018-10-24 14:55                   ` Balakrishna Godavarthi
  0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2018-10-18  7:58 UTC (permalink / raw)
  To: Balakrishna Godavarthi
  Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
	linux-bluetooth, hemantg, linux-arm-msm, Harish Bandi

Hi Balakrishna,

>>>>>>>>> This patch will prevent error messages splashing on console.
>>>>>>>>> [   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>>>>>> [   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>>>>>> [   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>>>>>> [   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>>>>>>>>> QCA wcn3990 will send the debug logs in the form of ACL packets.
>>>>>>>>> While decoding packet in qca_recv(), marking the received debug log
>>>>>>>>> packet as diagnostic packet.
>>>>>>>>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>>>>>>>>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>>>>>>>>> ---
>>>>>>>>> v2:
>>>>>>>>> * Addressed reviewer comments.
>>>>>>>>> v1:
>>>>>>>>> * initial patch
>>>>>>>>> ---
>>>>>>>>> drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
>>>>>>>>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>>>>>>>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>>>>>>>>> index d98ed0442201..63ac3c6b4149 100644
>>>>>>>>> --- a/drivers/bluetooth/hci_qca.c
>>>>>>>>> +++ b/drivers/bluetooth/hci_qca.c
>>>>>>>>> @@ -63,6 +63,10 @@
>>>>>>>>> /* susclk rate */
>>>>>>>>> #define SUSCLK_RATE_32KHZ	32768
>>>>>>>>> +/* Controller debug log header */
>>>>>>>>> +#define QCA_DEBUG_HDR_MSB	0xDC
>>>>>>>>> +#define QCA_DEBUG_HDR_LSB	0x2E
>>>>>>>>> +
>>>>>>>> since this is actually the ACL handle, why not call it QCA_DEBUG_HANDLE.
>>>>>>> [Bala]: will update.
>>>>>>>>> /* HCI_IBS transmit side sleep protocol states */
>>>>>>>>> enum tx_ibs_states {
>>>>>>>>> 	HCI_IBS_TX_ASLEEP,
>>>>>>>>> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
>>>>>>>>> 	return 0;
>>>>>>>>> }
>>>>>>>>> +static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
>>>>>>>>> +{
>>>>>>>>> +	/* We receive debug logs from chip as an ACL packets.
>>>>>>>>> +	 * Instead of sending the data to ACL to decode the
>>>>>>>>> +	 * received data, we are pushing them to the above layers
>>>>>>>>> +	 * as a diagnostic packet.
>>>>>>>>> +	 */
>>>>>>>>> +	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
>>>>>>>>> +	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
>>>>>>>> Skip the individual () since they are not needed. Also the skb->len
>>>>>>>> check is not needed since the H4_RECV_ACL already ensures the proper
>>>>>>>> length of the header.
>>>>>>>> And just use get_unaligned_le16(skb->data) here (or be16 if that is
>>>>>>>> the byte order).
>>>>>>> [Bala] : will update condition with _le16()
>>>>>>>>> +		return hci_recv_diag(hdev, skb);
>>>>>>>> Is there any reason to keep the 4 octets hci_acl_hdr with this SKB? Or
>>>>>>>> would it be better to be stripped off. Mainly asking are they any
>>>>>>>> other magic handles that we might want to feed through the diag
>>>>>>>> channel?
>>>>>>> [Bala]: yes we need header in the stack, to  differentiate between actual diagnostic packet and debug packet.
>>>>>> please explain that a bit more. There is just one debug handle or do
>>>>>> you have more special handles?
>>>>> [Bala]: Qualcomm bluetooth chip sends the debug data of the chip with ACL header along with fixed handler i.e. 0x2edc..
>>>>>      this handler is dedicated for the debug logs sent by qcomm bt chip and it is not used for any other connection handlers.
>>>>>      so here we are checking this handler and sending to stack as an
>>>>>      a diagnostic packet.. so during the log capture we will read this diagnostic packet and handler,to decode the debug packet.
>>>>>      that is the  reason why we don't remove handler during condition check,  in future, if qualcomm chip sends diagnostic packet,
>>>>>      then this will create an problem to upper layers to decide whether it is an diagnostic packet or the debug packet.
>>>>>     this is how we do it.
>>>>>    if( diagnostic packet && handler == 0x2edc)
>>>>>       treat them as an ddebug packet
>>>>>    else
>>>>>        treat as diagnostic packet.
>>>> let me interpret this answer. Besides debug handle 0x2edc, there are
>>>> other handles that are not connection handles. And in future updates
>>>> you want to send these handles also via hci_recv_diag channel.
>>> No, 0x2edc is an dedicated handle for debug logs, i don't really think they we will have an new handle coming up.
>>> this is only the handle we will send via hci_recv_diag channel to the stack.
>>> what i mean in my previous answer was,we don't to remove debug connection handle from the skb, because in the stack
>>> we look for a diagnostic packet and debug connection handler to decode the message.
>> if 0x2edc is the only magic connection handle, then lets strip the SKB
>> of the ACL packet header and send only the payload to via
>> hci_recv_diag. All the information is present and you would be just
>> sending the ACL packet header for no reason. The diagnostic packets
>> get a separate channel on the monitor interface.
> [Bala]: even we the felt the same to remove ACL packet header before sending to stack via an diagnostic channel,
> 
>        here is the case, let us assume that an in future qaulcomm bt chip want to send diagnosis data as a diagnostic packet.
>        if we remove ACL header for ACL debug packet, how can the stack differentiate between debug packet and diagnosis packet.

fair enough. Can we also do the same for the other Qualcomm / Atheros devices on USB and SMD bus? And what about implementing hdev->set_diag to enable / disable sending of debug logs. And of course the addition to btmon to decode the diagnostic channel.

Regards

Marcel


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs.
  2018-10-18  7:58                 ` Marcel Holtmann
@ 2018-10-24 14:55                   ` Balakrishna Godavarthi
  0 siblings, 0 replies; 11+ messages in thread
From: Balakrishna Godavarthi @ 2018-10-24 14:55 UTC (permalink / raw)
  To: Marcel Holtmann
  Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
	linux-bluetooth, hemantg, linux-arm-msm, Harish Bandi

Hi Balakrishna,

On 2018-10-18 13:28, Marcel Holtmann wrote:
> Hi Balakrishna,
> 
>>>>>>>>>> This patch will prevent error messages splashing on console.
>>>>>>>>>> [   78.426697] Bluetooth: hci_core.c:hci_acldata_packet() 
>>>>>>>>>> hci0: ACL packet for unknown connection handle 3804
>>>>>>>>>> [   78.436682] Bluetooth: hci_core.c:hci_acldata_packet() 
>>>>>>>>>> hci0: ACL packet for unknown connection handle 3804
>>>>>>>>>> [   78.446639] Bluetooth: hci_core.c:hci_acldata_packet() 
>>>>>>>>>> hci0: ACL packet for unknown connection handle 3804
>>>>>>>>>> [   78.456596] Bluetooth: hci_core.c:hci_acldata_packet() 
>>>>>>>>>> hci0: ACL packet for unknown connection handle 3804
>>>>>>>>>> QCA wcn3990 will send the debug logs in the form of ACL 
>>>>>>>>>> packets.
>>>>>>>>>> While decoding packet in qca_recv(), marking the received 
>>>>>>>>>> debug log
>>>>>>>>>> packet as diagnostic packet.
>>>>>>>>>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>>>>>>>>>> Signed-off-by: Balakrishna Godavarthi 
>>>>>>>>>> <bgodavar@codeaurora.org>
>>>>>>>>>> ---
>>>>>>>>>> v2:
>>>>>>>>>> * Addressed reviewer comments.
>>>>>>>>>> v1:
>>>>>>>>>> * initial patch
>>>>>>>>>> ---
>>>>>>>>>> drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
>>>>>>>>>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>>>>>>>>> diff --git a/drivers/bluetooth/hci_qca.c 
>>>>>>>>>> b/drivers/bluetooth/hci_qca.c
>>>>>>>>>> index d98ed0442201..63ac3c6b4149 100644
>>>>>>>>>> --- a/drivers/bluetooth/hci_qca.c
>>>>>>>>>> +++ b/drivers/bluetooth/hci_qca.c
>>>>>>>>>> @@ -63,6 +63,10 @@
>>>>>>>>>> /* susclk rate */
>>>>>>>>>> #define SUSCLK_RATE_32KHZ	32768
>>>>>>>>>> +/* Controller debug log header */
>>>>>>>>>> +#define QCA_DEBUG_HDR_MSB	0xDC
>>>>>>>>>> +#define QCA_DEBUG_HDR_LSB	0x2E
>>>>>>>>>> +
>>>>>>>>> since this is actually the ACL handle, why not call it 
>>>>>>>>> QCA_DEBUG_HANDLE.
>>>>>>>> [Bala]: will update.
>>>>>>>>>> /* HCI_IBS transmit side sleep protocol states */
>>>>>>>>>> enum tx_ibs_states {
>>>>>>>>>> 	HCI_IBS_TX_ASLEEP,
>>>>>>>>>> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct 
>>>>>>>>>> hci_dev *hdev, struct sk_buff *skb)
>>>>>>>>>> 	return 0;
>>>>>>>>>> }
>>>>>>>>>> +static int qca_recv_acl_data(struct hci_dev *hdev, struct 
>>>>>>>>>> sk_buff *skb)
>>>>>>>>>> +{
>>>>>>>>>> +	/* We receive debug logs from chip as an ACL packets.
>>>>>>>>>> +	 * Instead of sending the data to ACL to decode the
>>>>>>>>>> +	 * received data, we are pushing them to the above layers
>>>>>>>>>> +	 * as a diagnostic packet.
>>>>>>>>>> +	 */
>>>>>>>>>> +	if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
>>>>>>>>>> +	    (skb->data[1] == QCA_DEBUG_HDR_LSB))
>>>>>>>>> Skip the individual () since they are not needed. Also the 
>>>>>>>>> skb->len
>>>>>>>>> check is not needed since the H4_RECV_ACL already ensures the 
>>>>>>>>> proper
>>>>>>>>> length of the header.
>>>>>>>>> And just use get_unaligned_le16(skb->data) here (or be16 if 
>>>>>>>>> that is
>>>>>>>>> the byte order).
>>>>>>>> [Bala] : will update condition with _le16()
>>>>>>>>>> +		return hci_recv_diag(hdev, skb);
>>>>>>>>> Is there any reason to keep the 4 octets hci_acl_hdr with this 
>>>>>>>>> SKB? Or
>>>>>>>>> would it be better to be stripped off. Mainly asking are they 
>>>>>>>>> any
>>>>>>>>> other magic handles that we might want to feed through the diag
>>>>>>>>> channel?
>>>>>>>> [Bala]: yes we need header in the stack, to  differentiate 
>>>>>>>> between actual diagnostic packet and debug packet.
>>>>>>> please explain that a bit more. There is just one debug handle or 
>>>>>>> do
>>>>>>> you have more special handles?
>>>>>> [Bala]: Qualcomm bluetooth chip sends the debug data of the chip 
>>>>>> with ACL header along with fixed handler i.e. 0x2edc..
>>>>>>      this handler is dedicated for the debug logs sent by qcomm bt 
>>>>>> chip and it is not used for any other connection handlers.
>>>>>>      so here we are checking this handler and sending to stack as 
>>>>>> an
>>>>>>      a diagnostic packet.. so during the log capture we will read 
>>>>>> this diagnostic packet and handler,to decode the debug packet.
>>>>>>      that is the  reason why we don't remove handler during 
>>>>>> condition check,  in future, if qualcomm chip sends diagnostic 
>>>>>> packet,
>>>>>>      then this will create an problem to upper layers to decide 
>>>>>> whether it is an diagnostic packet or the debug packet.
>>>>>>     this is how we do it.
>>>>>>    if( diagnostic packet && handler == 0x2edc)
>>>>>>       treat them as an ddebug packet
>>>>>>    else
>>>>>>        treat as diagnostic packet.
>>>>> let me interpret this answer. Besides debug handle 0x2edc, there 
>>>>> are
>>>>> other handles that are not connection handles. And in future 
>>>>> updates
>>>>> you want to send these handles also via hci_recv_diag channel.
>>>> No, 0x2edc is an dedicated handle for debug logs, i don't really 
>>>> think they we will have an new handle coming up.
>>>> this is only the handle we will send via hci_recv_diag channel to 
>>>> the stack.
>>>> what i mean in my previous answer was,we don't to remove debug 
>>>> connection handle from the skb, because in the stack
>>>> we look for a diagnostic packet and debug connection handler to 
>>>> decode the message.
>>> if 0x2edc is the only magic connection handle, then lets strip the 
>>> SKB
>>> of the ACL packet header and send only the payload to via
>>> hci_recv_diag. All the information is present and you would be just
>>> sending the ACL packet header for no reason. The diagnostic packets
>>> get a separate channel on the monitor interface.
>> [Bala]: even we the felt the same to remove ACL packet header before 
>> sending to stack via an diagnostic channel,
>> 
>>        here is the case, let us assume that an in future qaulcomm bt 
>> chip want to send diagnosis data as a diagnostic packet.
>>        if we remove ACL header for ACL debug packet, how can the stack 
>> differentiate between debug packet and diagnosis packet.
> 
> fair enough. Can we also do the same for the other Qualcomm / Atheros
> devices on USB and SMD bus? And what about implementing hdev->set_diag
> to enable / disable sending of debug logs. And of course the addition
> to btmon to decode the diagnostic channel.
> 
[Bala]:
        Does thing change need to be done for other Qualcomm/Atheros 
device on USB and smd:  For the legacy Qualcomm/Atheros Chips 
(Rome/AR30x2/AR30x3), they don’t have this ACL data debug log feature.
        hdev->set_diag implementation to enable or disable the debug logs 
from controller: will study further and get back to you on this
        Qualcomm specific file in Bluez stack to decode the bypassed 
debug packets in btmon: soon we will be posting the parsing file.


> Regards
> 
> Marcel

-- 
Regards
Balakrishna.

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2018-10-24 14:55 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-03 15:11 [PATCH v2] Bluetooth: hci_qca: Add support for controller debug logs Balakrishna Godavarthi
2018-10-03 16:56 ` Marcel Holtmann
2018-10-16 14:02   ` Balakrishna Godavarthi
2018-10-16 14:35     ` Marcel Holtmann
2018-10-16 14:56       ` Balakrishna Godavarthi
2018-10-16 15:09         ` Marcel Holtmann
2018-10-16 15:19           ` Balakrishna Godavarthi
2018-10-16 15:31             ` Marcel Holtmann
2018-10-16 15:43               ` Balakrishna Godavarthi
2018-10-18  7:58                 ` Marcel Holtmann
2018-10-24 14:55                   ` Balakrishna Godavarthi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).