linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Stankus <lucas.p.stankus@gmail.com>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org,
	gregkh@linuxfoundation.org
Cc: linux-iio@vger.kernel.org, linux-staging@lists.linux.dev,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] staging: iio: cdc: ad7746: extract capac setup to own function
Date: Sun, 23 May 2021 14:12:37 -0300	[thread overview]
Message-ID: <b637a5ecde4e5f9f927a5b104332378d4721c91d.1621786036.git.lucas.p.stankus@gmail.com> (raw)
In-Reply-To: <cover.1621786036.git.lucas.p.stankus@gmail.com>

Refactor the capac register write logic to own function.

Also fixes the following checkpatch warning:
CHECK: Alignment should match open parenthesis

Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
---
 drivers/staging/iio/cdc/ad7746.c | 36 ++++++++++++++++----------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 367a5990ae35..4221312f0a32 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -209,6 +209,19 @@ static const unsigned char ad7746_cap_filter_rate_table[][2] = {
 	{16, 62 + 1}, {13, 77 + 1}, {11, 92 + 1}, {9, 110 + 1},
 };
 
+static int ad7746_set_capdac(struct ad7746_chip_info *chip, int channel)
+{
+	int ret = i2c_smbus_write_byte_data(chip->client,
+					    AD7746_REG_CAPDACA,
+					    chip->capdac[channel][0]);
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_write_byte_data(chip->client,
+					  AD7746_REG_CAPDACB,
+					  chip->capdac[channel][1]);
+}
+
 static int ad7746_select_channel(struct iio_dev *indio_dev,
 				 struct iio_chan_spec const *chan)
 {
@@ -224,17 +237,11 @@ static int ad7746_select_channel(struct iio_dev *indio_dev,
 			AD7746_CONF_CAPFS_SHIFT;
 		delay = ad7746_cap_filter_rate_table[idx][1];
 
+		ret = ad7746_set_capdac(chip, chan->channel);
+		if (ret < 0)
+			return ret;
+
 		if (chip->capdac_set != chan->channel) {
-			ret = i2c_smbus_write_byte_data(chip->client,
-				AD7746_REG_CAPDACA,
-				chip->capdac[chan->channel][0]);
-			if (ret < 0)
-				return ret;
-			ret = i2c_smbus_write_byte_data(chip->client,
-				AD7746_REG_CAPDACB,
-				chip->capdac[chan->channel][1]);
-			if (ret < 0)
-				return ret;
 
 			chip->capdac_set = chan->channel;
 		}
@@ -478,14 +485,7 @@ static int ad7746_write_raw(struct iio_dev *indio_dev,
 		chip->capdac[chan->channel][chan->differential] = val > 0 ?
 			AD7746_CAPDAC_DACP(val) | AD7746_CAPDAC_DACEN : 0;
 
-		ret = i2c_smbus_write_byte_data(chip->client,
-						AD7746_REG_CAPDACA,
-						chip->capdac[chan->channel][0]);
-		if (ret < 0)
-			goto out;
-		ret = i2c_smbus_write_byte_data(chip->client,
-						AD7746_REG_CAPDACB,
-						chip->capdac[chan->channel][1]);
+		ret = ad7746_set_capdac(chip, chan->channel);
 		if (ret < 0)
 			goto out;
 
-- 
2.31.1


  parent reply	other threads:[~2021-05-23 17:12 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-23 17:11 [PATCH v2 0/3] staging: iio: cdc: ad7746: initial effort to move out of staging Lucas Stankus
2021-05-23 17:11 ` [PATCH v2 1/3] staging: iio: cdc: ad7746: remove ordinary comments Lucas Stankus
2021-05-23 17:12 ` [PATCH v2 2/3] staging: iio: cdc: ad7746: clean up probe return Lucas Stankus
2021-05-24  7:53   ` Alexandru Ardelean
2021-05-23 17:12 ` Lucas Stankus [this message]
2021-05-24  8:09   ` [PATCH v2 3/3] staging: iio: cdc: ad7746: extract capac setup to own function Alexandru Ardelean
2021-05-26 17:07 ` [PATCH v2 0/3] staging: iio: cdc: ad7746: initial effort to move out of staging Jonathan Cameron
2021-05-31  1:48   ` Lucas Stankus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b637a5ecde4e5f9f927a5b104332378d4721c91d.1621786036.git.lucas.p.stankus@gmail.com \
    --to=lucas.p.stankus@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).