From: Vlastimil Babka <vbabka@suse.cz>
To: Clark Williams <williams@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
Thomas Gleixner <tglx@linutronix.de>,
LKML <linux-kernel@vger.kernel.org>,
RT <linux-rt-users@vger.kernel.org>
Subject: Re: [ANNOUNCE] v5.14-rc5-rt8
Date: Thu, 12 Aug 2021 23:30:29 +0200 [thread overview]
Message-ID: <bb98b54c-6d88-2a56-4998-51a304c19e8c@suse.cz> (raw)
In-Reply-To: <20210812162448.26274298@theseus.lan>
On 8/12/21 11:24 PM, Clark Williams wrote:
> On Thu, 12 Aug 2021 22:45:19 +0200
> Vlastimil Babka <vbabka@suse.cz> wrote:
>
>> On 8/12/21 10:18 PM, Clark Williams wrote:
>>> On Tue, 10 Aug 2021 18:37:31 +0200
>>> Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:
>>>
>>> Sebastian, et al,
>>>
>>> Got the following panic running v5.14-rc5-rt8:
>>>
>>> Aug 13 06:35:05 oberon kernel: page:000000009ac5dd73 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1ab3db
>>> Aug 13 06:35:05 oberon kernel: flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
>>> Aug 13 06:35:05 oberon kernel: raw: 0017ffffc0000000 ffffee1286aceb88 ffffee1287b66288 0000000000000000
>>> Aug 13 06:35:05 oberon kernel: raw: 0000000000000000 0000000000100000 00000000ffffffff 0000000000000000
>>> Aug 13 06:35:05 oberon kernel: page dumped because: VM_BUG_ON_PAGE(!PageSlab(page))
>>> Aug 13 06:35:05 oberon kernel: ------------[ cut here ]------------
>>> Aug 13 06:35:05 oberon kernel: kernel BUG at include/linux/page-flags.h:814!
>>> Aug 13 06:35:05 oberon kernel: invalid opcode: 0000 [#1] PREEMPT_RT SMP PTI
>>> Aug 13 06:35:05 oberon kernel: CPU: 3 PID: 12345 Comm: hackbench Not tainted 5.14.0-rc5-rt8+ #12
>>> Aug 13 06:35:05 oberon kernel: Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0359.2016.0906.1028 09/06/2016
>>> Aug 13 06:35:05 oberon kernel: RIP: 0010:___slab_alloc+0x340/0x940
>>
>> Are you able to translate this RIP via addr2line?
>
> $ addr2line -e /data/o/linux-5.14.y-rt/vmlinux ___slab_alloc+0x340/0x940
> <snip>/arch/x86/include/asm/processor.h:440
Hm that's not much useful, I'd need the line in mm/slub.c
does ./scripts/faddr2line give better output?
>>
>>> Aug 13 06:35:05 oberon kernel: Code: c6 48 0f a3 05 b1 7b 57 03 72 99 c7 85 78 ff ff ff ff ff ff ff 48 8b 7d 88 e9 8d fd ff ff 48 c7 c6 50 5a 7c b0 e>
>>> Aug 13 06:35:05 oberon kernel: RSP: 0018:ffffba1c4a8b7ab0 EFLAGS: 00010293
>>> Aug 13 06:35:05 oberon kernel: RAX: 0000000000000000 RBX: 0000000000000002 RCX: ffff9bb765118000
>>> Aug 13 06:35:05 oberon kernel: RDX: 0000000000000000 RSI: ffffffffaf426050 RDI: 00000000ffffffff
>>> Aug 13 06:35:05 oberon kernel: RBP: ffffba1c4a8b7b70 R08: 0000000000000000 R09: 0000000000000000
>>> Aug 13 06:35:05 oberon kernel: R10: 0000000000000000 R11: 0000000000000000 R12: ffff9bb7410d3600
>>> Aug 13 06:35:05 oberon kernel: R13: 0000000000400cc0 R14: 00000000001f7770 R15: ffff9bbe76df7770
>>> Aug 13 06:35:05 oberon kernel: FS: 00007f474b1be740(0000) GS:ffff9bbe76c00000(0000) knlGS:0000000000000000
>>> Aug 13 06:35:05 oberon kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>> Aug 13 06:35:05 oberon kernel: CR2: 00007f60c04bdaf8 CR3: 0000000124f3a003 CR4: 00000000003706e0
>>> Aug 13 06:35:05 oberon kernel: Call Trace:
>>> Aug 13 06:35:05 oberon kernel: ? __alloc_skb+0x1db/0x270
>>> Aug 13 06:35:05 oberon kernel: ? __alloc_skb+0x1db/0x270
>>> Aug 13 06:35:05 oberon kernel: ? kmem_cache_alloc_node+0xa4/0x2b0
>>> Aug 13 06:35:05 oberon kernel: kmem_cache_alloc_node+0xa4/0x2b0
>>> Aug 13 06:35:05 oberon kernel: __alloc_skb+0x1db/0x270
>>> Aug 13 06:35:05 oberon kernel: alloc_skb_with_frags+0x64/0x250
>>> Aug 13 06:35:05 oberon kernel: sock_alloc_send_pskb+0x260/0x2b0
>>> Aug 13 06:35:05 oberon kernel: ? bpf_lsm_socket_getpeersec_dgram+0xa/0x10
>>> Aug 13 06:35:05 oberon kernel: unix_stream_sendmsg+0x27c/0x550
>>> Aug 13 06:35:05 oberon kernel: ? unix_seqpacket_recvmsg+0x60/0x60
>>> Aug 13 06:35:05 oberon kernel: sock_sendmsg+0xbd/0xd0
>>> Aug 13 06:35:05 oberon kernel: sock_write_iter+0xb9/0x120
>>> Aug 13 06:35:05 oberon kernel: new_sync_write+0x175/0x200
>>> Aug 13 06:35:05 oberon kernel: vfs_write+0x3c4/0x510
>>> Aug 13 06:35:05 oberon kernel: ksys_write+0xc9/0x110
>>> Aug 13 06:35:05 oberon kernel: do_syscall_64+0x3b/0x90
>>> Aug 13 06:35:05 oberon kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae
>>
>> While SLUB RT rewrite is obvious suspect, could be also a boring slab
>> misuse (use-after-free etc), wouldn't be the first related to skb's...
>> If this reproduces well, could you try booting with slub_debug boot
>> param. Could catch the culprit sooner (but also hide the bug,
>> unfortunately).
>
> Without 'slub_debug' it panic's consistently.
>
> Adding 'slub_debug' to the boot command line causes odd behavior where load and measurement tasks
> run by 'rteval' crash, but (so far) no kernel panic.
Huh. And nothing in dmesg about corrupted slabs with slub_debug?
>>> Aug 13 06:35:05 oberon kernel: RIP: 0033:0x7f474b3a2877
>>> Aug 13 06:35:05 oberon kernel: Code: 75 05 48 83 c4 58 c3 e8 37 4e ff ff 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 0>
>>> Aug 13 06:35:05 oberon kernel: RSP: 002b:00007ffe5e71e7a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
>>> Aug 13 06:35:05 oberon kernel: RAX: ffffffffffffffda RBX: 00000000000003e8 RCX: 00007f474b3a2877
>>> Aug 13 06:35:05 oberon kernel: RDX: 00000000000003e8 RSI: 00007ffe5e71e7b0 RDI: 0000000000000010
>>> Aug 13 06:35:05 oberon kernel: RBP: 00007ffe5e71ebf0 R08: 00007ffe5e71e700 R09: 0000000000000000
>>> Aug 13 06:35:05 oberon kernel: R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffe5e71e7b0
>>> Aug 13 06:35:05 oberon kernel: R13: 0000000000000008 R14: 0000560b46008210 R15: 0000000000000000
>>> Aug 13 06:35:05 oberon kernel: Modules linked in: uinput rfcomm snd_seq_dummy snd_hrtimer xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_nat_tf>
>>> Aug 13 06:35:05 oberon kernel: snd_intel_dspcfg snd_hda_codec mei_hdcp snd_hda_core snd_hwdep cfg80211 snd_seq iTCO_wdt snd_seq_device intel_pmc_bxt>
>>> Aug 13 06:35:05 oberon kernel: ---[ end trace 0000000000000002 ]---
>>> Aug 13 06:35:05 oberon kernel: RIP: 0010:___slab_alloc+0x340/0x940
>>> Aug 13 06:35:05 oberon kernel: Code: c6 48 0f a3 05 b1 7b 57 03 72 99 c7 85 78 ff ff ff ff ff ff ff 48 8b 7d 88 e9 8d fd ff ff 48 c7 c6 50 5a 7c b0 e>
>>> Aug 13 06:35:05 oberon kernel: RSP: 0018:ffffba1c4a8b7ab0 EFLAGS: 00010293
>>> Aug 13 06:35:05 oberon kernel: RAX: 0000000000000000 RBX: 0000000000000002 RCX: ffff9bb765118000
>>> Aug 13 06:35:05 oberon kernel: RDX: 0000000000000000 RSI: ffffffffaf426050 RDI: 00000000ffffffff
>>> Aug 13 06:35:05 oberon kernel: RBP: ffffba1c4a8b7b70 R08: 0000000000000000 R09: 0000000000000000
>>> Aug 13 06:35:05 oberon kernel: R10: 0000000000000000 R11: 0000000000000000 R12: ffff9bb7410d3600
>>> Aug 13 06:35:05 oberon kernel: R13: 0000000000400cc0 R14: 00000000001f7770 R15: ffff9bbe76df7770
>>> Aug 13 06:35:05 oberon kernel: FS: 00007f474b1be740(0000) GS:ffff9bbe76c00000(0000) knlGS:0000000000000000
>>> Aug 13 06:35:05 oberon kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>> Aug 13 06:35:05 oberon kernel: CR2: 00007f60c1d901a0 CR3: 0000000124f3a003 CR4: 00000000003706e0
>>> Aug 13 06:35:05 oberon kernel: Kernel panic - not syncing:
>>>
>>> Config is attached.
>>>
>>> I was running the rteval script that kicks off parallel kernel builds and hackbench runs as loads and runs cyclictest with a thread on each core:
>>>
>>> $ sudo rteval --duration=10m
>>>
>>> Clark
>>>
>>
>
>
next prev parent reply other threads:[~2021-08-12 21:31 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-10 16:37 [ANNOUNCE] v5.14-rc5-rt8 Sebastian Andrzej Siewior
2021-08-12 20:18 ` Clark Williams
2021-08-12 20:45 ` Vlastimil Babka
2021-08-12 21:24 ` Clark Williams
2021-08-12 21:30 ` Vlastimil Babka [this message]
2021-08-12 21:44 ` Clark Williams
2021-08-14 19:08 ` Vlastimil Babka
2021-08-15 3:13 ` Mike Galbraith
2021-08-15 9:01 ` Mike Galbraith
2021-08-15 4:17 ` Mike Galbraith
2021-08-15 9:35 ` Vlastimil Babka
2021-08-15 13:03 ` Mike Galbraith
2021-08-12 21:36 ` Vlastimil Babka
2021-08-12 21:47 ` Clark Williams
2021-08-13 10:56 ` Mike Galbraith
2021-08-14 5:33 ` Mike Galbraith
2021-08-14 18:28 ` Vlastimil Babka
2021-08-15 1:26 ` Mike Galbraith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bb98b54c-6d88-2a56-4998-51a304c19e8c@suse.cz \
--to=vbabka@suse.cz \
--cc=bigeasy@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rt-users@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=williams@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).