LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: Jonathan Marek <jonathan@marek.ca>
Cc: linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-kernel-owner@vger.kernel.org
Subject: Re: [PATCH v3 7/7] arm64: dts: qcom: sm8250: add interconnect nodes
Date: Tue, 28 Jul 2020 17:32:54 +0530
Message-ID: <bbe96cb3a8f1c28310963db2d1b97990@codeaurora.org> (raw)
In-Reply-To: <20200728023811.5607-8-jonathan@marek.ca>

On 2020-07-28 08:08, Jonathan Marek wrote:
> Add the interconnect dts nodes for sm8250.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>

> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 82 ++++++++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 636e2196138c..945bd4a9d640 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -7,6 +7,7 @@
>  #include <dt-bindings/clock/qcom,gcc-sm8250.h>
>  #include <dt-bindings/clock/qcom,gpucc-sm8250.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/interconnect/qcom,sm8250.h>
>  #include <dt-bindings/mailbox/qcom-ipcc.h>
>  #include <dt-bindings/power/qcom-aoss-qmp.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
> @@ -978,6 +979,55 @@ spi13: spi@a94000 {
>  			};
>  		};
> 
> +		config_noc: interconnect@1500000 {
> +			compatible = "qcom,sm8250-config-noc";
> +			reg = <0 0x01500000 0 0xa580>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		system_noc: interconnect@1620000 {
> +			compatible = "qcom,sm8250-system-noc";
> +			reg = <0 0x01620000 0 0x1c200>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		mc_virt: interconnect@163d000 {
> +			compatible = "qcom,sm8250-mc-virt";
> +			reg = <0 0x0163d000 0 0x1000>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		aggre1_noc: interconnect@16e0000 {
> +			compatible = "qcom,sm8250-aggre1-noc";
> +			reg = <0 0x016e0000 0 0x1f180>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		aggre2_noc: interconnect@1700000 {
> +			compatible = "qcom,sm8250-aggre2-noc";
> +			reg = <0 0x01700000 0 0x33000>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		compute_noc: interconnect@1733000 {
> +			compatible = "qcom,sm8250-compute-noc";
> +			reg = <0 0x01733000 0 0xa180>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		mmss_noc: interconnect@1740000 {
> +			compatible = "qcom,sm8250-mmss-noc";
> +			reg = <0 0x01740000 0 0x1f080>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
>  		ufs_mem_hc: ufshc@1d84000 {
>  			compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
>  				     "jedec,ufs-2.0";
> @@ -1050,6 +1100,13 @@ ufs_mem_phy_lanes: lanes@1d87400 {
>  			};
>  		};
> 
> +		ipa_virt: interconnect@1e00000 {
> +			compatible = "qcom,sm8250-ipa-virt";
> +			reg = <0 0x01e00000 0 0x1000>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
>  		tcsr_mutex_regs: syscon@1f40000 {
>  			compatible = "syscon";
>  			reg = <0x0 0x01f40000 0x0 0x40000>;
> @@ -1364,6 +1421,27 @@ usb_2_ssphy: lane@88eb200 {
>  			};
>  		};
> 
> +		dc_noc: interconnect@90c0000 {
> +			compatible = "qcom,sm8250-dc-noc";
> +			reg = <0 0x090c0000 0 0x4200>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		gem_noc: interconnect@9100000 {
> +			compatible = "qcom,sm8250-gem-noc";
> +			reg = <0 0x09100000 0 0xb4000>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		npu_noc: interconnect@9990000 {
> +			compatible = "qcom,sm8250-npu-noc";
> +			reg = <0 0x09990000 0 0x1600>;
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
>  		usb_1: usb@a6f8800 {
>  			compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
>  			reg = <0 0x0a6f8800 0 0x400>;
> @@ -2359,6 +2437,10 @@ rpmhpd_opp_turbo_l1: opp10 {
>  					};
>  				};
>  			};
> +
> +			apps_bcm_voter: bcm_voter {
> +				compatible = "qcom,bcm-voter";
> +			};
>  		};
>  	};

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

      reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-28  2:37 [PATCH v3 0/7] Add SM8150 and SM8250 interconnect drivers Jonathan Marek
2020-07-28  2:38 ` [PATCH v3 1/7] dt-bindings: interconnect: single yaml file for RPMh " Jonathan Marek
2020-07-28 11:25   ` Sibi Sankar
2020-07-31 20:47   ` Rob Herring
2020-07-28  2:38 ` [PATCH v3 2/7] dt-bindings: interconnect: Add Qualcomm SM8150 DT bindings Jonathan Marek
2020-07-28 11:26   ` Sibi Sankar
2020-07-28  2:38 ` [PATCH v3 3/7] dt-bindings: interconnect: Add Qualcomm SM8250 " Jonathan Marek
2020-07-28 11:28   ` Sibi Sankar
2020-07-28  2:38 ` [PATCH v3 4/7] interconnect: qcom: Add SM8150 interconnect provider driver Jonathan Marek
2020-07-28 11:30   ` Sibi Sankar
2020-07-28  2:38 ` [PATCH v3 5/7] interconnect: qcom: Add SM8250 " Jonathan Marek
2020-07-28 11:31   ` Sibi Sankar
2020-07-28  2:38 ` [PATCH v3 6/7] arm64: dts: qcom: sm8150: add interconnect nodes Jonathan Marek
2020-07-28 11:55   ` Sibi Sankar
2020-07-28  2:38 ` [PATCH v3 7/7] arm64: dts: qcom: sm8250: " Jonathan Marek
2020-07-28 12:02   ` Sibi Sankar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bbe96cb3a8f1c28310963db2d1b97990@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel-owner@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git