linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/5] arm64: dts: ti: Introduce base support for AM62x SoC
Date: Wed, 09 Feb 2022 19:10:51 +0000	[thread overview]
Message-ID: <bc6cb6e1adcf6860a595b71246778733@kernel.org> (raw)
In-Reply-To: <20220208131827.1430086-5-vigneshr@ti.com>

On 2022-02-08 13:18, Vignesh Raghavendra wrote:
> The AM62 SoC family is the follow on AM335x built on K3 Multicore SoC
> architecture platform, providing ultra-low-power modes, dual display,
> multi-sensor edge compute, security and other BOM-saving integration.
> The AM62 SoC targets broad market to enable applications such as
> Industrial HMI, PLC/CNC/Robot control, Medical Equipment, Building
> Automation, Appliances and more.
> 
> Some highlights of this SoC are:
> 
> * Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster.
>   Pin-to-pin compatible options for single and quad core are available.
> * Cortex-M4F for general-purpose or safety usage.
> * Dual display support, providing 24-bit RBG parallel interface and
>   OLDI/LVDS-4 Lane x2, up to 200MHz pixel clock support for 2K display
>   resolution.
> * Selectable GPUsupport, up to 8GFLOPS, providing better user 
> experience
>   in 3D graphic display case and Android.
> * PRU(Programmable Realtime Unit) support for customized programmable
>   interfaces/IOs.
> * Integrated Giga-bit Ethernet switch supporting up to a total of two
>   external ports (TSN capable).
> * 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3x eMMC and SD, GPMC for
>   NAND/FPGA connection, OSPI memory controller, 3xMcASP for audio,
>   1x CSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals.
> * Dedicated Centralized System Controller for Security, Power, and
>   Resource Management.
> * Multiple low power modes support, ex: Deep sleep,Standby, MCU-only,
>   enabling battery powered system design.
> 
> This add bare minimum DT describing ARM compute clusters, Main, MCU and
> Wakeup domain and interconnects, UARTs and I2Cs to enable booting using
> ramdisk.
> 
> More details can be found in the Technical Reference Manual:
> https://www.ti.com/lit/pdf/spruiv7
> 
> Co-developed-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Suman Anna <s-anna@ti.com>
> Co-developed-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62-main.dtsi   | 263 +++++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi    |  36 +++
>  arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi |  41 ++++
>  arch/arm64/boot/dts/ti/k3-am62.dtsi        | 104 ++++++++
>  arch/arm64/boot/dts/ti/k3-am625.dtsi       | 103 ++++++++
>  5 files changed, 547 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am62-main.dtsi
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am62.dtsi
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am625.dtsi
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> new file mode 100644
> index 000000000000..81d6d99ca180
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> @@ -0,0 +1,263 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for AM625 SoC Family Main Domain peripherals
> + *
> + * Copyright (C) 2020-2022 Texas Instruments Incorporated - 
> https://www.ti.com/
> + */
> +
> +&cbass_main {
> +	gic500: interrupt-controller@1800000 {
> +		compatible = "arm,gic-v3";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
> +		      <0x00 0x01880000 0x00 0xC0000>;	/* GICR */

Usual rant: you are missing the GICC, GICH and GICV regions
that are implemented by the CPU. Cortex-A53 implements them
(they are not optional), so please describe them.

> +		/*
> +		 * vcpumntirq:
> +		 * virtual CPU interface maintenance interrupt
> +		 */
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		gic_its: msi-controller@1820000 {
> +			compatible = "arm,gic-v3-its";
> +			reg = <0x00 0x01820000 0x00 0x10000>;
> +			socionext,synquacer-pre-its = <0x1000000 0x400000>;

The mind boggles...

         M.
-- 
Jazz is not dead. It just smells funny...

  parent reply	other threads:[~2022-02-09 19:11 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-08 13:18 [PATCH 0/5] arm64: Initial support for Texas Instruments AM62 Platform Vignesh Raghavendra
2022-02-08 13:18 ` [PATCH 1/5] soc: ti: k3-socinfo: Add AM62x JTAG ID Vignesh Raghavendra
2022-02-08 13:18 ` [PATCH 2/5] dt-bindings: arm: ti: Add bindings for AM625 SoC Vignesh Raghavendra
2022-02-08 17:01   ` Krzysztof Kozlowski
2022-02-09 19:04     ` Vignesh Raghavendra
2022-02-09 21:29       ` Krzysztof Kozlowski
2022-02-11 16:39   ` Rob Herring
2022-02-08 13:18 ` [PATCH 3/5] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62 Vignesh Raghavendra
2022-02-11 16:41   ` Rob Herring
2022-02-08 13:18 ` [PATCH 4/5] arm64: dts: ti: Introduce base support for AM62x SoC Vignesh Raghavendra
2022-02-08 17:05   ` Krzysztof Kozlowski
2022-02-09 19:04     ` Vignesh Raghavendra
2022-02-09 21:36       ` Krzysztof Kozlowski
2022-02-09 19:10   ` Marc Zyngier [this message]
2022-02-10 19:34     ` Nishanth Menon
2022-02-11 11:33       ` Marc Zyngier
2022-02-11 23:55         ` Nishanth Menon
2022-02-12 11:40           ` Marc Zyngier
2022-02-15 21:12             ` Nishanth Menon
2022-02-08 13:18 ` [PATCH 5/5] arm64: dts: ti: Add support for AM62-SK Vignesh Raghavendra
2022-02-08 17:08   ` Krzysztof Kozlowski
2022-02-09 19:05     ` Vignesh Raghavendra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bc6cb6e1adcf6860a595b71246778733@kernel.org \
    --to=maz@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).