LKML Archive on lore.kernel.org
 help / Atom feed
From: Tony Krowiak <akrowiak@linux.ibm.com>
To: Janosch Frank <frankja@linux.ibm.com>,
	Tony Krowiak <akrowiak@linux.vnet.ibm.com>,
	linux-s390@vger.kernel.org, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org
Cc: freude@de.ibm.com, schwidefsky@de.ibm.com,
	heiko.carstens@de.ibm.com, borntraeger@de.ibm.com,
	cohuck@redhat.com, kwankhede@nvidia.com,
	bjsdjshi@linux.vnet.ibm.com, pbonzini@redhat.com,
	alex.williamson@redhat.com, pmorel@linux.vnet.ibm.com,
	alifm@linux.vnet.ibm.com, mjrosato@linux.vnet.ibm.com,
	jjherne@linux.vnet.ibm.com, thuth@redhat.com,
	pasic@linux.vnet.ibm.com, berrange@redhat.com,
	fiuczy@linux.vnet.ibm.com, buendgen@de.ibm.com
Subject: Re: [PATCH v8 07/22] KVM: s390: refactor crypto initialization
Date: Fri, 10 Aug 2018 12:13:17 -0400
Message-ID: <bccf66eb-9532-a512-18de-d76b33cdc1df@linux.ibm.com> (raw)
In-Reply-To: <169d2a44-34ae-3785-bdac-77018dc2ad13@linux.ibm.com>

On 08/09/2018 01:58 AM, Janosch Frank wrote:
> On 08.08.2018 16:44, Tony Krowiak wrote:
>> From: Tony Krowiak <akrowiak@linux.ibm.com>
>>
>> This patch refactors the code that initializes and sets up the
>> crypto configuration for a guest. The following changes are
>> implemented via this patch:
>>
>> 1. Prior to the introduction of AP device virtualization, it
>>     was not necessary to provide guest access to the CRYCB
>>     unless the MSA extension 3 (MSAX3) facility was installed
>>     on the host system. With the introduction of AP device
>>     virtualization, the CRYCB must be made accessible to the
>>     guest if the AP instructions are installed on the host
>>     and are to be provided to the guest.
>>
>> 2. Introduces a flag indicating AP instructions executed on
>>     the guest shall be interpreted by the firmware. It is
>>     initialized to indicate AP instructions are to be
>>     to be interpreted and is used to set the SIE bit for
>>     each vcpu during vcpu setup.
>>
>> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
>> Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
>> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
>> Tested-by: Michael Mueller <mimu@linux.ibm.com>
>> Tested-by: Farhan Ali <alifm@linux.ibm.com>
>> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
> Acked-by: Janosch Frank <frankja@linux.ibm.com>
>
>> ---
>>   arch/s390/include/asm/kvm_host.h |    3 +
>>   arch/s390/include/uapi/asm/kvm.h |    1 +
>>   arch/s390/kvm/kvm-s390.c         |   86 ++++++++++++++++++++------------------
>>   3 files changed, 49 insertions(+), 41 deletions(-)
>>
>> diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
>> index af39561..0c13f61 100644
>> --- a/arch/s390/include/asm/kvm_host.h
>> +++ b/arch/s390/include/asm/kvm_host.h
>> @@ -187,6 +187,7 @@ struct kvm_s390_sie_block {
>>   #define ECA_AIV		0x00200000
>>   #define ECA_VX		0x00020000
>>   #define ECA_PROTEXCI	0x00002000
>> +#define ECA_APIE	0x00000008
>>   #define ECA_SII		0x00000001
>>   	__u32	eca;			/* 0x004c */
>>   #define ICPT_INST	0x04
>> @@ -256,6 +257,7 @@ struct kvm_s390_sie_block {
>>   	__u8	reservede4[4];		/* 0x00e4 */
>>   	__u64	tecmc;			/* 0x00e8 */
>>   	__u8	reservedf0[12];		/* 0x00f0 */
>> +#define CRYCB_FORMAT_MASK 0x00000003
>>   #define CRYCB_FORMAT1 0x00000001
>>   #define CRYCB_FORMAT2 0x00000003
>>   	__u32	crycbd;			/* 0x00fc */
>> @@ -714,6 +716,7 @@ struct kvm_s390_crypto {
>>   	__u32 crycbd;
>>   	__u8 aes_kw;
>>   	__u8 dea_kw;
>> +	__u8 apie;
> In the last review I wanted a comment here to know what they do.

I'm not sure what the 'they' are that you reference here. I couldn't
find your review comment but I assume you are looking for a comment
explaining what the 'apie' field is used for. I am removing
the 'apie' field based on a review comment by David, so there is
no longer a need for a comment here, assuming that is what you
are referring to.

>
>>   static void kvm_s390_vcpu_crypto_setup(struct kvm_vcpu *vcpu)
>>   {
>> -	if (!test_kvm_facility(vcpu->kvm, 76))
>> +	/*
>> +	 * If neither the AP instructions nor the MSAX3 facility are installed
>> +	 * on the host, then there is no need for a CRYCB in SIE because the
>> +	 * they will not be installed on the guest either.
> the they

I'll fix this grammatical error.

>
>> +	 */
>> +	if (ap_instructions_available() && !test_facility(76))
>>   		return;
> I know you're not responsible for that one :) but 0 being the wanted
> value here is a bit counter-intuitive.

Based on another review comment by David, I've changed this to:

if (!test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_AP) &&
     !test_kvm_facility(vcpu->kvm, 76))


>
>>   
>> -	vcpu->arch.sie_block->ecb3 &= ~(ECB3_AES | ECB3_DEA);
>> +	vcpu->arch.sie_block->crycbd = vcpu->kvm->arch.crypto.crycbd;
>> +
>> +	vcpu->arch.sie_block->eca &= ~ECA_APIE;
> The scb is zero allocated, are the ECA and the ECB3s set somewhere
> in-between, or is that your way of making sure the controls are
> definitely gone for good?

It is a bit of defensive programming. There is a KVM_SET_DEVICE_ATTR
ioctl to set crypto attributes (KVM_S390_VM_CRYPTO) that ultimately
calls the kvm_s390_vm_set_crypto() function. You'll notice that at the
end of that function, there is a call to kvm_s390_vcpu_crypto_reset_all()
that calls the kvm_s390_vcpu_crypto_setup() for each vcpu, so it would
seem that there is the possiblility that there could be a need to
set ECB3 to a different value. At any rate, I see no good reason to
remove this.

>
>> +	if (vcpu->kvm->arch.crypto.apie &&
>> +	    test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_AP))
>> +		vcpu->arch.sie_block->eca |= ECA_APIE;
>>   
>> -	if (vcpu->kvm->arch.crypto.aes_kw)
>> -		vcpu->arch.sie_block->ecb3 |= ECB3_AES;
>> -	if (vcpu->kvm->arch.crypto.dea_kw)
>> -		vcpu->arch.sie_block->ecb3 |= ECB3_DEA;
>> +	/* If MSAX3 is installed on the guest, set up protected key support */
>> +	if (test_kvm_facility(vcpu->kvm, 76)) {
>> +		vcpu->arch.sie_block->ecb3 &= ~(ECB3_AES | ECB3_DEA);
>>   
>> -	vcpu->arch.sie_block->crycbd = vcpu->kvm->arch.crypto.crycbd;
>> +		if (vcpu->kvm->arch.crypto.aes_kw)
>> +			vcpu->arch.sie_block->ecb3 |= ECB3_AES;
>> +		if (vcpu->kvm->arch.crypto.dea_kw)
>> +			vcpu->arch.sie_block->ecb3 |= ECB3_DEA;
>> +	}
>>   }
>>   
>>   void kvm_s390_vcpu_unsetup_cmma(struct kvm_vcpu *vcpu)
>>
>


  reply index

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-08 14:44 [PATCH v8 00/22] vfio-ap: guest dedicated crypto adapters Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 01/22] s390/zcrypt: Add ZAPQ inline function Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 02/22] s390/zcrypt: Review inline assembler constraints Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 03/22] s390/zcrypt: Show load of cards and queues in sysfs Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 04/22] s390/zcrypt: Integrate ap_asm.h into include/asm/ap.h Tony Krowiak
2018-08-09  9:06   ` Cornelia Huck
2018-08-09  9:17     ` Harald Freudenberger
2018-08-09 13:45       ` Harald Freudenberger
2018-08-09 16:06       ` Tony Krowiak
2018-08-10  8:49         ` Cornelia Huck
2018-08-10  9:37           ` Harald Freudenberger
2018-08-10 15:53             ` Tony Krowiak
2018-08-10 15:50           ` Tony Krowiak
2018-08-09 15:18     ` Tony Krowiak
2018-08-09 15:43       ` Heiko Carstens
2018-08-09 16:55         ` Tony Krowiak
2018-08-13  9:24     ` Harald Freudenberger
2018-08-13  9:34       ` Cornelia Huck
2018-08-08 14:44 ` [PATCH v8 05/22] KVM: s390: vsie: simulate VCPU SIE entry/exit Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 06/22] KVM: s390: introduce and use KVM_REQ_VSIE_RESTART Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 07/22] KVM: s390: refactor crypto initialization Tony Krowiak
2018-08-09  5:58   ` Janosch Frank
2018-08-10 16:13     ` Tony Krowiak [this message]
2018-08-09  8:25   ` David Hildenbrand
2018-08-09 19:54     ` Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 08/22] s390: vfio-ap: base implementation of VFIO AP device driver Tony Krowiak
2018-08-09 10:12   ` Cornelia Huck
2018-08-08 14:44 ` [PATCH v8 09/22] s390: vfio-ap: register matrix device with VFIO mdev framework Tony Krowiak
2018-08-09 11:06   ` Cornelia Huck
2018-08-09 16:27     ` Pierre Morel
2018-08-10  8:59       ` Cornelia Huck
2018-08-08 14:44 ` [PATCH v8 10/22] s390: vfio-ap: sysfs interfaces to configure adapters Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 11/22] s390: vfio-ap: sysfs interfaces to configure domains Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 12/22] s390: vfio-ap: sysfs interfaces to configure control domains Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 13/22] s390: vfio-ap: sysfs interface to view matrix mdev matrix Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 14/22] KVM: s390: interfaces to clear CRYCB masks Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 15/22] s390: vfio-ap: implement mediated device open callback Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 16/22] s390: vfio-ap: implement VFIO_DEVICE_GET_INFO ioctl Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 17/22] s390: vfio-ap: zeroize the AP queues Tony Krowiak
2018-08-10  9:14   ` Cornelia Huck
2018-08-10 10:49     ` Pierre Morel
2018-08-10 11:16       ` Cornelia Huck
2018-08-10 16:24         ` Tony Krowiak
2018-08-13  6:57           ` Cornelia Huck
2018-08-08 14:44 ` [PATCH v8 18/22] s390: vfio-ap: implement VFIO_DEVICE_RESET ioctl Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 19/22] KVM: s390: Clear Crypto Control Block when using vSIE Tony Krowiak
2018-08-09  8:10   ` David Hildenbrand
2018-08-09  8:50     ` Pierre Morel
2018-08-09  8:57     ` Pierre Morel
2018-08-08 14:44 ` [PATCH v8 20/22] KVM: s390: Handling of Cypto control block in VSIE Tony Krowiak
2018-08-09  6:20   ` Janosch Frank
2018-08-09  7:33     ` Pierre Morel
2018-08-08 14:44 ` [PATCH v8 21/22] KVM: s390: CPU model support for AP virtualization Tony Krowiak
2018-08-09  8:17   ` David Hildenbrand
2018-08-09  8:34     ` Harald Freudenberger
2018-08-09 20:27     ` Tony Krowiak
2018-08-08 14:44 ` [PATCH v8 22/22] s390: doc: detailed specifications " Tony Krowiak
2018-08-08 15:06 ` [PATCH v8 00/22] vfio-ap: guest dedicated crypto adapters Janosch Frank
2018-08-08 16:25 ` Cornelia Huck
2018-08-08 22:52   ` Tony Krowiak

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bccf66eb-9532-a512-18de-d76b33cdc1df@linux.ibm.com \
    --to=akrowiak@linux.ibm.com \
    --cc=akrowiak@linux.vnet.ibm.com \
    --cc=alex.williamson@redhat.com \
    --cc=alifm@linux.vnet.ibm.com \
    --cc=berrange@redhat.com \
    --cc=bjsdjshi@linux.vnet.ibm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=buendgen@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=fiuczy@linux.vnet.ibm.com \
    --cc=frankja@linux.ibm.com \
    --cc=freude@de.ibm.com \
    --cc=heiko.carstens@de.ibm.com \
    --cc=jjherne@linux.vnet.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kwankhede@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=mjrosato@linux.vnet.ibm.com \
    --cc=pasic@linux.vnet.ibm.com \
    --cc=pbonzini@redhat.com \
    --cc=pmorel@linux.vnet.ibm.com \
    --cc=schwidefsky@de.ibm.com \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox