From: Guenter Roeck <linux@roeck-us.net>
To: Pascal PAILLET-LME <p.paillet@st.com>,
"dmitry.torokhov@gmail.com" <dmitry.torokhov@gmail.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"lee.jones@linaro.org" <lee.jones@linaro.org>,
"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
"broonie@kernel.org" <broonie@kernel.org>,
"wim@linux-watchdog.org" <wim@linux-watchdog.org>,
"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-watchdog@vger.kernel.org" <linux-watchdog@vger.kernel.org>,
"benjamin.gaignard@linaro.org" <benjamin.gaignard@linaro.org>,
"eballetbo@gmail.com" <eballetbo@gmail.com>
Subject: Re: [PATCH v4 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
Date: Thu, 18 Oct 2018 06:34:45 -0700 [thread overview]
Message-ID: <be9eb164-6ada-25c8-6f75-e3d8667728e1@roeck-us.net> (raw)
In-Reply-To: <1539853324-29051-9-git-send-email-p.paillet@st.com>
On 10/18/2018 02:02 AM, Pascal PAILLET-LME wrote:
> From: pascal paillet <p.paillet@st.com>
>
> The stpmic1 PMIC embeds a watchdog which is disabled by default. As soon
> as the watchdog is started, it must be refreshed periodically otherwise
> the PMIC goes off.
>
> Signed-off-by: pascal paillet <p.paillet@st.com>
> ---
> changes in v4:
> * fix stop watchdog function
> * Kconfig: fix grammar issue
>
> drivers/watchdog/Kconfig | 12 ++++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/stpmic1_wdt.c | 139 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 152 insertions(+)
> create mode 100644 drivers/watchdog/stpmic1_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 5ea8909..6d2ffef 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -806,6 +806,18 @@ config STM32_WATCHDOG
> To compile this driver as a module, choose M here: the
> module will be called stm32_iwdg.
>
> +config STPMIC1_WATCHDOG
> + tristate "STPMIC1 PMIC watchdog support"
> + depends on MFD_STPMIC1
> + select WATCHDOG_CORE
> + help
> + Say Y here to include watchdog support embedded into STPMIC1 PMIC.
> + If the watchdog timer expires, stpmic1 will shut down all its power
> + supplies.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called spmic1_wdt.
> +
> config UNIPHIER_WATCHDOG
> tristate "UniPhier watchdog support"
> depends on ARCH_UNIPHIER || COMPILE_TEST
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index bf92e7b..2649cf3 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -217,3 +217,4 @@ obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
> obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
> obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
> obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
> +obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o
> diff --git a/drivers/watchdog/stpmic1_wdt.c b/drivers/watchdog/stpmic1_wdt.c
> new file mode 100644
> index 0000000..a6cbc27
> --- /dev/null
> +++ b/drivers/watchdog/stpmic1_wdt.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) STMicroelectronics 2018
> +// Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
> +
> +#include <linux/kernel.h>
> +#include <linux/mfd/stpmic1.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/watchdog.h>
> +
> +/* WATCHDOG CONTROL REGISTER bit */
> +#define WDT_START BIT(0)
> +#define WDT_PING BIT(1)
> +#define WDT_START_MASK BIT(0)
> +#define WDT_PING_MASK BIT(1)
> +#define WDT_STOP 0
> +
> +#define PMIC_WDT_MIN_TIMEOUT 1
> +#define PMIC_WDT_MAX_TIMEOUT 256
> +#define PMIC_WDT_DEFAULT_TIMEOUT 30
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> + "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +struct stpmic1_wdt {
> + struct stpmic1 *pmic;
> + struct watchdog_device wdtdev;
> +};
> +
> +static int pmic_wdt_start(struct watchdog_device *wdd)
> +{
> + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + return regmap_update_bits(wdt->pmic->regmap,
> + WCHDG_CR, WDT_START_MASK, WDT_START);
> +}
> +
> +static int pmic_wdt_stop(struct watchdog_device *wdd)
> +{
> + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + return regmap_update_bits(wdt->pmic->regmap,
> + WCHDG_CR, WDT_START_MASK, WDT_STOP);
> +}
> +
> +static int pmic_wdt_ping(struct watchdog_device *wdd)
> +{
> + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + return regmap_update_bits(wdt->pmic->regmap,
> + WCHDG_CR, WDT_PING_MASK, WDT_PING);
> +}
> +
> +static int pmic_wdt_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + wdd->timeout = timeout;
> + /* timeout is equal to register value + 1 */
> + return regmap_write(wdt->pmic->regmap, WCHDG_TIMER_CR, timeout - 1);
> +}
> +
> +static const struct watchdog_info pmic_watchdog_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "STPMIC1 PMIC Watchdog",
> +};
> +
> +static const struct watchdog_ops pmic_watchdog_ops = {
> + .owner = THIS_MODULE,
> + .start = pmic_wdt_start,
> + .stop = pmic_wdt_stop,
> + .ping = pmic_wdt_ping,
> + .set_timeout = pmic_wdt_set_timeout,
> +};
> +
> +static int pmic_wdt_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct stpmic1 *pmic;
> + struct stpmic1_wdt *wdt;
> +
> + if (!pdev->dev.parent)
> + return -EINVAL;
> +
> + pmic = dev_get_drvdata(pdev->dev.parent);
> + if (!pmic)
> + return -EINVAL;
> +
> + wdt = devm_kzalloc(&pdev->dev, sizeof(struct stpmic1_wdt), GFP_KERNEL);
> + if (!wdt)
> + return -ENOMEM;
> +
> + wdt->pmic = pmic;
> +
> + wdt->wdtdev.info = &pmic_watchdog_info;
> + wdt->wdtdev.ops = &pmic_watchdog_ops;
> + wdt->wdtdev.min_timeout = PMIC_WDT_MIN_TIMEOUT;
> + wdt->wdtdev.max_timeout = PMIC_WDT_MAX_TIMEOUT;
Sorry I missed that earlier: You'll also want to set wdtdev.parent.
Thanks,
Guenter
> +
> + wdt->wdtdev.timeout = PMIC_WDT_DEFAULT_TIMEOUT;
> + watchdog_init_timeout(&wdt->wdtdev, 0, &pdev->dev);
> +
> + watchdog_set_nowayout(&wdt->wdtdev, nowayout);
> + watchdog_set_drvdata(&wdt->wdtdev, wdt);
> +
> + ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdtdev);
> + if (ret)
> + return ret;
> +
> + dev_dbg(wdt->pmic->dev, "PMIC Watchdog driver probed\n");
> + return 0;
> +}
> +
> +static const struct of_device_id of_pmic_wdt_match[] = {
> + { .compatible = "st,stpmic1-wdt" },
> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(of, of_pmic_wdt_match);
> +
> +static struct platform_driver stpmic1_wdt_driver = {
> + .probe = pmic_wdt_probe,
> + .driver = {
> + .name = "stpmic1-wdt",
> + .of_match_table = of_pmic_wdt_match,
> + },
> +};
> +module_platform_driver(stpmic1_wdt_driver);
> +
> +MODULE_DESCRIPTION("Watchdog driver for STPMIC1 device");
> +MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
> +MODULE_LICENSE("GPL v2");
>
prev parent reply other threads:[~2018-10-18 13:34 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-18 9:02 [PATCH v4 0/8] Introduce STPMIC1 PMIC Driver Pascal PAILLET-LME
2018-10-18 9:02 ` [PATCH v4 2/8] mfd: stpmic1: add stpmic1 driver Pascal PAILLET-LME
2018-10-25 11:21 ` Lee Jones
2018-10-25 12:40 ` Benjamin Gaignard
2018-10-26 7:17 ` Lee Jones
2018-10-18 9:02 ` [PATCH v4 1/8] dt-bindings: mfd: document stpmic1 Pascal PAILLET-LME
2018-10-18 18:47 ` Rob Herring
2018-10-25 9:44 ` Lee Jones
2018-10-25 12:57 ` Rob Herring
2018-10-26 6:46 ` Lee Jones
2018-10-26 9:48 ` Pascal PAILLET-LME
2018-10-26 11:46 ` Lee Jones
2018-10-18 9:02 ` [PATCH v4 3/8] dt-bindings: regulator: document stpmic1 pmic regulators Pascal PAILLET-LME
2018-10-18 9:02 ` [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver Pascal PAILLET-LME
2018-10-19 11:50 ` Mark Brown
2018-10-24 12:54 ` Pascal PAILLET-LME
2018-10-24 13:17 ` Mark Brown
2018-10-25 13:23 ` Pascal PAILLET-LME
2018-10-26 20:33 ` Mark Brown
2018-10-18 9:02 ` [PATCH v4 6/8] input: stpmic1: add stpmic1 onkey driver Pascal PAILLET-LME
2018-10-18 18:12 ` dmitry.torokhov
2018-10-18 9:02 ` [PATCH v4 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog Pascal PAILLET-LME
2018-10-18 9:02 ` [PATCH v4 5/8] dt-bindings: input: document stpmic1 pmic onkey Pascal PAILLET-LME
2018-10-18 9:02 ` [PATCH v4 8/8] watchdog: stpmic1: add stpmic1 watchdog driver Pascal PAILLET-LME
2018-10-18 13:34 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=be9eb164-6ada-25c8-6f75-e3d8667728e1@roeck-us.net \
--to=linux@roeck-us.net \
--cc=benjamin.gaignard@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=eballetbo@gmail.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=p.paillet@st.com \
--cc=robh+dt@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).