linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver
@ 2021-11-23  4:28 Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 1/8] dt-bindings: Add the yaml bindings for EUD Souradeep Chowdhury
                   ` (7 more replies)
  0 siblings, 8 replies; 12+ messages in thread
From: Souradeep Chowdhury @ 2021-11-23  4:28 UTC (permalink / raw)
  To: linux-arm-msm, linux-usb, devicetree, pure.logic, bjorn.andersson, greg
  Cc: linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu, Souradeep Chowdhury

This is a series of patches that implements a driver for the control
peripheral, EUD (Embedded USB Debugger). The EUD is a mini-USB hub
implemented on chip to support the USB-based debug and trace capabilities.
Apart from debug capabilities, EUD has a control peripheral. Control
Peripheral is on when EUD is on and gets signals like USB attach, pet
EUD etc. EUD driver listens to events like USB attach or detach and then
informs the USB about these events via ROLE-SWITCH. At regular intervals,
the EUD driver receives an interrupt to pet the driver indicating that
the software is functional.

Changes in V1

* EUD has now been mapped as a separate DT node as it is an independent QCOM IP.

* EUD is attached to the connector child of dwc3 via port end point since EUD
  driver needs the connector for role-switching,

* EUD driver has been moved now to drivers/soc/qcom/qcom_eud.c.

* All the comments from version 0 of the patch has been implemented.

Souradeep Chowdhury (8):
  dt-bindings: Add the yaml bindings for EUD
  dt-bindings: connector: Add property for EUD type-C connector
  bindings: usb: dwc3: Update dwc3 properties for EUD connector
  usb: dwc3: drd: Register the eud connector child node for dwc3
  soc: qcom: eud: Add driver support for Embedded USB Debugger(EUD)
  arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector
  arm64: dts: qcom: sc7280: Set the default dr_mode for usb2
  MAINTAINERS: Add maintainer entry for EUD

 Documentation/ABI/testing/sysfs-driver-eud         |   9 +
 .../bindings/connector/usb-connector.yaml          |   4 +
 .../devicetree/bindings/soc/qcom/qcom,eud.yaml     |  52 ++++
 .../devicetree/bindings/usb/snps,dwc3.yaml         |   6 +
 MAINTAINERS                                        |   8 +
 arch/arm64/boot/dts/qcom/sc7280-idp.dts            |   4 +
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |  25 ++
 drivers/soc/qcom/Kconfig                           |  10 +
 drivers/soc/qcom/Makefile                          |   1 +
 drivers/soc/qcom/qcom_eud.c                        | 268 +++++++++++++++++++++
 drivers/usb/dwc3/drd.c                             |  26 ++
 11 files changed, 413 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-eud
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
 create mode 100644 drivers/soc/qcom/qcom_eud.c

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH V1 1/8] dt-bindings: Add the yaml bindings for EUD
  2021-11-23  4:28 [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver Souradeep Chowdhury
@ 2021-11-23  4:28 ` Souradeep Chowdhury
  2021-11-23 16:34   ` Rob Herring
  2021-11-24  3:38   ` Bjorn Andersson
  2021-11-23  4:28 ` [PATCH V1 2/8] dt-bindings: connector: Add property for EUD type-C connector Souradeep Chowdhury
                   ` (6 subsequent siblings)
  7 siblings, 2 replies; 12+ messages in thread
From: Souradeep Chowdhury @ 2021-11-23  4:28 UTC (permalink / raw)
  To: linux-arm-msm, linux-usb, devicetree, pure.logic, bjorn.andersson, greg
  Cc: linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu, Souradeep Chowdhury

Documentation for Embedded USB Debugger(EUD) device tree
bindings in yaml format.

Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
---
 .../devicetree/bindings/soc/qcom/qcom,eud.yaml     | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
new file mode 100644
index 0000000..724552c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Embedded USB Debugger
+
+maintainers:
+  - Souradeep Chowdhury <schowdhu@codeaurora.org>
+
+description: |
+  This binding is used to describe the Qualcomm Embedded USB Debugger, which is
+  mini USB-hub implemented on chip to support USB-based debug capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7280-eud
+      - const: qcom,eud
+
+  reg:
+    items:
+      - description: EUD Base Register Region
+      - description: EUD Mode Manager Register
+
+  interrupts:
+    description:
+      EUD interrupt
+
+
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used. See graph.txt
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    eud@88e0000 {
+           compatible = "qcom,sc7280-eud","qcom,eud";
+           reg = <0 0x88e0000 0 0x2000>,
+                 <0 0x88e2000 0 0x1000>;
+    };
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH V1 2/8] dt-bindings: connector: Add property for EUD type-C connector
  2021-11-23  4:28 [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 1/8] dt-bindings: Add the yaml bindings for EUD Souradeep Chowdhury
@ 2021-11-23  4:28 ` Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 3/8] bindings: usb: dwc3: Update dwc3 properties for EUD connector Souradeep Chowdhury
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 12+ messages in thread
From: Souradeep Chowdhury @ 2021-11-23  4:28 UTC (permalink / raw)
  To: linux-arm-msm, linux-usb, devicetree, pure.logic, bjorn.andersson, greg
  Cc: linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu, Souradeep Chowdhury

Added the property for EUD(Embedded USB Debugger) connector. EUD
is a mini usb hub with debug and trace capabilities and it has a
type C connector attached to it for role-switching. This connector
is attached to EUD via port.

Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
---
 Documentation/devicetree/bindings/connector/usb-connector.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7eb8659..bd1823a 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -30,6 +30,10 @@ properties:
           - const: samsung,usb-connector-11pin
           - const: usb-b-connector
 
+      - items:
+          - const: qcom,usb-connector-eud
+          - const: usb-c-connector
+
   label:
     description: Symbolic name for the connector.
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH V1 3/8] bindings: usb: dwc3: Update dwc3 properties for EUD connector
  2021-11-23  4:28 [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 1/8] dt-bindings: Add the yaml bindings for EUD Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 2/8] dt-bindings: connector: Add property for EUD type-C connector Souradeep Chowdhury
@ 2021-11-23  4:28 ` Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 4/8] usb: dwc3: drd: Register the eud connector child node for dwc3 Souradeep Chowdhury
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 12+ messages in thread
From: Souradeep Chowdhury @ 2021-11-23  4:28 UTC (permalink / raw)
  To: linux-arm-msm, linux-usb, devicetree, pure.logic, bjorn.andersson, greg
  Cc: linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu, Souradeep Chowdhury

Add the connector property for dwc3 node. This connector can
be used to role-switch the controller from device to host and
vice versa.

Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
---
 Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 078fb78..9382168 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -318,6 +318,12 @@ properties:
     items:
       enum: [1, 4, 8, 16, 32, 64, 128, 256]
 
+  connector:
+    type: object
+    $ref: /connector/usb-connector.yaml#
+    description:
+      Connector for dual role switch, especially for "eud-usb-c-connector"
+
 unevaluatedProperties: false
 
 required:
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH V1 4/8] usb: dwc3: drd: Register the eud connector child node for dwc3
  2021-11-23  4:28 [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver Souradeep Chowdhury
                   ` (2 preceding siblings ...)
  2021-11-23  4:28 ` [PATCH V1 3/8] bindings: usb: dwc3: Update dwc3 properties for EUD connector Souradeep Chowdhury
@ 2021-11-23  4:28 ` Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 5/8] soc: qcom: eud: Add driver support for Embedded USB Debugger(EUD) Souradeep Chowdhury
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 12+ messages in thread
From: Souradeep Chowdhury @ 2021-11-23  4:28 UTC (permalink / raw)
  To: linux-arm-msm, linux-usb, devicetree, pure.logic, bjorn.andersson, greg
  Cc: linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu, Souradeep Chowdhury

Register the child node for dwc3 which is the "eud_usb_connector".
The eud driver will be able to switch the usb role from device to
host and vice versa using the role switch property of dwc3 node.

Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
---
 drivers/usb/dwc3/drd.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index d7f7683..b4ea55c 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/extcon.h>
+#include <linux/of_platform.h>
 #include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
@@ -164,6 +165,27 @@ static int dwc3_otg_get_irq(struct dwc3 *dwc)
 	return irq;
 }
 
+static int dwc3_register_eud(struct dwc3 *dwc)
+{
+	struct device		*dev = dwc->dev;
+	struct device_node	*np = dev->of_node;
+	int                     ret;
+
+	of_get_child_by_name(np, "eud_usb_connector");
+	if (!np) {
+		dev_dbg(dev, "no usb_connector child node specified\n");
+		return 0;
+	}
+
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "failed to register usb_connector - %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 void dwc3_otg_init(struct dwc3 *dwc)
 {
 	u32 reg;
@@ -580,6 +602,10 @@ int dwc3_drd_init(struct dwc3 *dwc)
 		ret = dwc3_setup_role_switch(dwc);
 		if (ret < 0)
 			return ret;
+
+		ret = dwc3_register_eud(dwc);
+		if (ret < 0)
+			return ret;
 	} else if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH V1 5/8] soc: qcom: eud: Add driver support for Embedded USB Debugger(EUD)
  2021-11-23  4:28 [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver Souradeep Chowdhury
                   ` (3 preceding siblings ...)
  2021-11-23  4:28 ` [PATCH V1 4/8] usb: dwc3: drd: Register the eud connector child node for dwc3 Souradeep Chowdhury
@ 2021-11-23  4:28 ` Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 6/8] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector Souradeep Chowdhury
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 12+ messages in thread
From: Souradeep Chowdhury @ 2021-11-23  4:28 UTC (permalink / raw)
  To: linux-arm-msm, linux-usb, devicetree, pure.logic, bjorn.andersson, greg
  Cc: linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu, Souradeep Chowdhury

Add support for control peripheral of EUD (Embedded USB Debugger) to
listen to events such as USB attach/detach, pet EUD to indicate software
is functional.Reusing the platform device kobj, sysfs entry 'enable' is
created to enable or disable EUD.

To enable the eud the following needs to be done
echo 1 > /sys/bus/platform/.../enable

To disable eud, following is the command
echo 0 > /sys/bus/platform/.../enable

Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
---
 Documentation/ABI/testing/sysfs-driver-eud |   9 +
 drivers/soc/qcom/Kconfig                   |  10 ++
 drivers/soc/qcom/Makefile                  |   1 +
 drivers/soc/qcom/qcom_eud.c                | 268 +++++++++++++++++++++++++++++
 4 files changed, 288 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-eud
 create mode 100644 drivers/soc/qcom/qcom_eud.c

diff --git a/Documentation/ABI/testing/sysfs-driver-eud b/Documentation/ABI/testing/sysfs-driver-eud
new file mode 100644
index 0000000..eaf2e82
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-eud
@@ -0,0 +1,9 @@
+What:		/sys/bus/platform/drivers/eud/.../enable
+Date:           October 2021
+Contact:        Souradeep Chowdhury <schowdhu@codeaurora.org>
+Description:
+		The Enable/Disable sysfs interface for Embedded
+		USB Debugger(EUD). This enables and disables the
+		EUD based on a 1 or a 0 value. By enabling EUD,
+		the user is able to activate the mini-usb hub of
+		EUD for debug and trace capabilities.
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 79b568f..a4db41b 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -42,6 +42,16 @@ config QCOM_CPR
 	  To compile this driver as a module, choose M here: the module will
 	  be called qcom-cpr
 
+config QCOM_EUD
+	tristate "QCOM Embedded USB Debugger(EUD) Driver"
+	select USB_ROLE_SWITCH
+	help
+	  This module enables support for Qualcomm Technologies, Inc.
+	  Embedded USB Debugger (EUD). The EUD is a control peripheral
+	  which reports VBUS attach/detach events and has USB-based
+	  debug and trace capabilities. On selecting m, the module name
+	  that is built is qcom_eud.ko
+
 config QCOM_GENI_SE
 	tristate "QCOM GENI Serial Engine Driver"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index ad675a6..3331a40 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_QCOM_AOSS_QMP) +=	qcom_aoss.o
 obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
 obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
 obj-$(CONFIG_QCOM_CPR)		+= cpr.o
+obj-$(CONFIG_QCOM_EUD)          += qcom_eud.o
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
 obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o
diff --git a/drivers/soc/qcom/qcom_eud.c b/drivers/soc/qcom/qcom_eud.c
new file mode 100644
index 0000000..613ac41
--- /dev/null
+++ b/drivers/soc/qcom/qcom_eud.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015-2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/usb/role.h>
+
+#define EUD_REG_INT1_EN_MASK	0x0024
+#define EUD_REG_INT_STATUS_1	0x0044
+#define EUD_REG_CTL_OUT_1	0x0074
+#define EUD_REG_VBUS_INT_CLR	0x0080
+#define EUD_REG_CSR_EUD_EN	0x1014
+#define EUD_REG_SW_ATTACH_DET	0x1018
+#define EUD_REG_EUD_EN2         0x0000
+
+#define EUD_ENABLE		BIT(0)
+#define EUD_INT_PET_EUD		BIT(0)
+#define EUD_INT_VBUS		BIT(2)
+#define EUD_INT_SAFE_MODE	BIT(4)
+#define EUD_INT_ALL		(EUD_INT_VBUS|EUD_INT_SAFE_MODE)
+
+struct eud_chip {
+	struct device			*dev;
+	struct usb_role_switch		*role_sw;
+	void __iomem			*eud_reg_base;
+	void __iomem			*eud_mode_mgr2_phys_base;
+	unsigned int			int_status;
+	int				eud_irq;
+	bool				enable;
+	bool				usb_attach;
+
+};
+
+static int enable_eud(struct eud_chip *priv)
+{
+	writel(EUD_ENABLE, priv->eud_reg_base + EUD_REG_CSR_EUD_EN);
+	writel(EUD_INT_VBUS | EUD_INT_SAFE_MODE,
+			priv->eud_reg_base + EUD_REG_INT1_EN_MASK);
+	writel(1, priv->eud_mode_mgr2_phys_base + EUD_REG_EUD_EN2);
+
+	return usb_role_switch_set_role(priv->role_sw, USB_ROLE_DEVICE);
+}
+
+static void disable_eud(struct eud_chip *priv)
+{
+	writel(0, priv->eud_reg_base + EUD_REG_CSR_EUD_EN);
+	writel(0, priv->eud_mode_mgr2_phys_base + EUD_REG_EUD_EN2);
+}
+
+static ssize_t enable_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct eud_chip *chip = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d\n", chip->enable);
+}
+
+static ssize_t enable_store(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct eud_chip *chip = dev_get_drvdata(dev);
+	bool enable;
+	int ret;
+
+	if (kstrtobool(buf, &enable))
+		return -EINVAL;
+
+	if (enable) {
+		ret = enable_eud(chip);
+		if (!ret)
+			chip->enable = enable;
+	} else {
+		disable_eud(chip);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(enable);
+
+static struct attribute *eud_attrs[] = {
+	&dev_attr_enable.attr,
+	NULL,
+};
+
+static struct attribute_group attr_group = {
+	.attrs = eud_attrs,
+};
+
+static const struct attribute_group *attr_groups[] = {
+	&attr_group,
+	NULL
+};
+
+static void usb_attach_detach(struct eud_chip *chip)
+{
+	u32 reg;
+
+	/* read ctl_out_1[4] to find USB attach or detach event */
+	reg = readl(chip->eud_reg_base + EUD_REG_CTL_OUT_1);
+	if (reg & EUD_INT_SAFE_MODE)
+		chip->usb_attach = true;
+	else
+		chip->usb_attach = false;
+
+	/* set and clear vbus_int_clr[0] to clear interrupt */
+	writel(BIT(0), chip->eud_reg_base + EUD_REG_VBUS_INT_CLR);
+	writel(0, chip->eud_reg_base + EUD_REG_VBUS_INT_CLR);
+}
+
+static void pet_eud(struct eud_chip *chip)
+{
+	u32 reg;
+	int ret;
+
+	/* read sw_attach_det[0] to find attach/detach event */
+	reg = readl(chip->eud_reg_base +  EUD_REG_SW_ATTACH_DET);
+	if (reg & EUD_INT_PET_EUD) {
+		/* Detach & Attach pet for EUD */
+		writel(0, chip->eud_reg_base + EUD_REG_SW_ATTACH_DET);
+		/* Delay to make sure detach pet is done before attach pet */
+		ret = readl_poll_timeout(chip->eud_reg_base + EUD_REG_SW_ATTACH_DET,
+					reg, (reg == 0), 1, 100);
+		if (ret) {
+			dev_err(chip->dev, "Detach pet failed\n");
+			return;
+		}
+
+		writel(EUD_INT_PET_EUD, chip->eud_reg_base +
+				EUD_REG_SW_ATTACH_DET);
+	} else {
+		/* Attach pet for EUD */
+		writel(EUD_INT_PET_EUD, chip->eud_reg_base +
+				EUD_REG_SW_ATTACH_DET);
+	}
+}
+
+static irqreturn_t handle_eud_irq(int irq, void *data)
+{
+	struct eud_chip *chip = data;
+	u32 reg;
+
+	/* read status register and find out which interrupt triggered */
+	reg = readl(chip->eud_reg_base +  EUD_REG_INT_STATUS_1);
+	switch (reg & EUD_INT_ALL) {
+	case EUD_INT_VBUS:
+		chip->int_status = EUD_INT_VBUS;
+		usb_attach_detach(chip);
+		return IRQ_WAKE_THREAD;
+	case EUD_INT_SAFE_MODE:
+		pet_eud(chip);
+		break;
+	default:
+		return IRQ_NONE;
+	}
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t handle_eud_irq_thread(int irq, void *data)
+{
+	struct eud_chip *chip = data;
+	int ret;
+
+	if (chip->int_status == EUD_INT_VBUS) {
+		if (chip->usb_attach)
+			ret = usb_role_switch_set_role(chip->role_sw, USB_ROLE_DEVICE);
+		else
+			ret = usb_role_switch_set_role(chip->role_sw, USB_ROLE_HOST);
+		if (ret)
+			dev_err(chip->dev, "failed to set role switch\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int eud_probe(struct platform_device *pdev)
+{
+	struct eud_chip *chip;
+	struct fwnode_handle *fwnode = pdev->dev.fwnode, *ep, *connector;
+	int ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &pdev->dev;
+
+	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
+	if (!ep)
+		return -ENODEV;
+
+	connector = fwnode_graph_get_remote_port_parent(ep);
+	fwnode_handle_put(ep);
+	if (!connector)
+		return -ENODEV;
+
+	chip->role_sw = fwnode_usb_role_switch_get(connector);
+	if (IS_ERR(chip->role_sw)) {
+		return dev_err_probe(chip->dev, PTR_ERR(chip->role_sw),
+					"failed to get role switch\n");
+	}
+
+	chip->eud_reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->eud_reg_base))
+		return PTR_ERR(chip->eud_reg_base);
+
+	chip->eud_mode_mgr2_phys_base = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(chip->eud_mode_mgr2_phys_base))
+		return PTR_ERR(chip->eud_mode_mgr2_phys_base);
+
+	chip->eud_irq = platform_get_irq(pdev, 0);
+	ret = devm_request_threaded_irq(&pdev->dev, chip->eud_irq, handle_eud_irq,
+			handle_eud_irq_thread, IRQF_ONESHOT, NULL, chip);
+	if (ret)
+		return dev_err_probe(chip->dev, ret, "failed to allocate irq\n");
+
+	enable_irq_wake(chip->eud_irq);
+
+	platform_set_drvdata(pdev, chip);
+
+	return 0;
+}
+
+static int eud_remove(struct platform_device *pdev)
+{
+	struct eud_chip *chip = platform_get_drvdata(pdev);
+
+	if (chip->enable)
+		disable_eud(chip);
+
+	device_init_wakeup(&pdev->dev, false);
+	disable_irq_wake(chip->eud_irq);
+
+	return 0;
+}
+
+static const struct of_device_id eud_dt_match[] = {
+	{ .compatible = "qcom,sc7280-eud" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, eud_dt_match);
+
+static struct platform_driver eud_driver = {
+	.probe		= eud_probe,
+	.remove		= eud_remove,
+	.driver		= {
+		.name		= "eud",
+		.dev_groups	= attr_groups,
+		.of_match_table = eud_dt_match,
+	},
+};
+module_platform_driver(eud_driver);
+
+MODULE_DESCRIPTION("QTI EUD driver");
+MODULE_LICENSE("GPL v2");
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH V1 6/8] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector
  2021-11-23  4:28 [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver Souradeep Chowdhury
                   ` (4 preceding siblings ...)
  2021-11-23  4:28 ` [PATCH V1 5/8] soc: qcom: eud: Add driver support for Embedded USB Debugger(EUD) Souradeep Chowdhury
@ 2021-11-23  4:28 ` Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 7/8] arm64: dts: qcom: sc7280: Set the default dr_mode for usb2 Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 8/8] MAINTAINERS: Add maintainer entry for EUD Souradeep Chowdhury
  7 siblings, 0 replies; 12+ messages in thread
From: Souradeep Chowdhury @ 2021-11-23  4:28 UTC (permalink / raw)
  To: linux-arm-msm, linux-usb, devicetree, pure.logic, bjorn.andersson, greg
  Cc: linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu, Souradeep Chowdhury

Add the Embedded USB Debugger(EUD) device tree node. The
node contains EUD base register region and EUD mode
manager register regions along with the interrupt entry.
Also add the connector to EUD which is mapped as the child
of dwc3. The connector is attached to EUD via port. Also add
the role-switch property to dwc3 node.

Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 53a21d0..2d14e5c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1315,6 +1315,18 @@
 				phys = <&usb_2_hsphy>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
+				usb-role-switch;
+				usb_con: eud_usb_connector {
+					compatible = "qcom,usb-connector-eud",
+						     "usb-c-connector";
+					ports {
+						port@0 {
+							usb2_role_switch: endpoint {
+								remote-endpoint = <&eud_ep>;
+							};
+						};
+					};
+				};
 			};
 		};
 
@@ -1339,6 +1351,19 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		eud:  eud@88e0000 {
+			compatible = "qcom,sc7280-eud","qcom,eud";
+			reg = <0 0x88e0000 0 0x2000>,
+			      <0 0x88e2000 0 0x1000>;
+			interrupt-parent = <&pdc>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			port {
+				eud_ep: endpoint {
+					remote-endpoint = <&usb2_role_switch>;
+				};
+			};
+		};
+
 		nsp_noc: interconnect@a0c0000 {
 			reg = <0 0x0a0c0000 0 0x10000>;
 			compatible = "qcom,sc7280-nsp-noc";
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH V1 7/8] arm64: dts: qcom: sc7280: Set the default dr_mode for usb2
  2021-11-23  4:28 [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver Souradeep Chowdhury
                   ` (5 preceding siblings ...)
  2021-11-23  4:28 ` [PATCH V1 6/8] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector Souradeep Chowdhury
@ 2021-11-23  4:28 ` Souradeep Chowdhury
  2021-11-23  4:28 ` [PATCH V1 8/8] MAINTAINERS: Add maintainer entry for EUD Souradeep Chowdhury
  7 siblings, 0 replies; 12+ messages in thread
From: Souradeep Chowdhury @ 2021-11-23  4:28 UTC (permalink / raw)
  To: linux-arm-msm, linux-usb, devicetree, pure.logic, bjorn.andersson, greg
  Cc: linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu, Souradeep Chowdhury

Set the default dr_mode for usb2 node to "otg" to enable.
role-switch for EUD(Embedded USB Debugger) connector node.

Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 64fc22a..7c69c78 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -61,6 +61,10 @@
 	modem-init;
 };
 
+&usb_2_dwc3 {
+	dr_mode = "otg";
+};
+
 &pmk8350_vadc {
 	pmr735a_die_temp {
 		reg = <PMR735A_ADC7_DIE_TEMP>;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH V1 8/8] MAINTAINERS: Add maintainer entry for EUD
  2021-11-23  4:28 [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver Souradeep Chowdhury
                   ` (6 preceding siblings ...)
  2021-11-23  4:28 ` [PATCH V1 7/8] arm64: dts: qcom: sc7280: Set the default dr_mode for usb2 Souradeep Chowdhury
@ 2021-11-23  4:28 ` Souradeep Chowdhury
  7 siblings, 0 replies; 12+ messages in thread
From: Souradeep Chowdhury @ 2021-11-23  4:28 UTC (permalink / raw)
  To: linux-arm-msm, linux-usb, devicetree, pure.logic, bjorn.andersson, greg
  Cc: linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu, Souradeep Chowdhury

Add the entry for maintainer for EUD driver
and other associated files.

Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
---
 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0227e15..54f616a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7018,6 +7018,14 @@ F:	include/trace/events/mdio.h
 F:	include/uapi/linux/mdio.h
 F:	include/uapi/linux/mii.h
 
+EUD-QCOM
+M:	Souradeep Chowdhury <schowdhu@codeaurora.org>
+L:	linux-arm-msm@vger.kernel.org
+S:	Maintained
+F:	Documentation/ABI/testing/sysfs-driver-eud
+F:	Documentation/devicetree/bindings/arm/msm/qcom,eud.yaml
+F:	drivers/usb/common/qcom_eud.c
+
 EXFAT FILE SYSTEM
 M:	Namjae Jeon <linkinjeon@kernel.org>
 M:	Sungjong Seo <sj1557.seo@samsung.com>
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH V1 1/8] dt-bindings: Add the yaml bindings for EUD
  2021-11-23  4:28 ` [PATCH V1 1/8] dt-bindings: Add the yaml bindings for EUD Souradeep Chowdhury
@ 2021-11-23 16:34   ` Rob Herring
  2021-11-24  3:38   ` Bjorn Andersson
  1 sibling, 0 replies; 12+ messages in thread
From: Rob Herring @ 2021-11-23 16:34 UTC (permalink / raw)
  To: Souradeep Chowdhury
  Cc: rnayak, devicetree, pheragu, satyap, linux-kernel, sibis,
	pure.logic, psodagud, tsoni, quic_schowdhu, linux-usb,
	saiprakash.ranjan, bjorn.andersson, greg, linux-arm-msm

On Tue, 23 Nov 2021 09:58:19 +0530, Souradeep Chowdhury wrote:
> Documentation for Embedded USB Debugger(EUD) device tree
> bindings in yaml format.
> 
> Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
> ---
>  .../devicetree/bindings/soc/qcom/qcom,eud.yaml     | 52 ++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,eud.example.dt.yaml: example-0: eud@88e0000:reg:0: [0, 143523840, 0, 8192] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,eud.example.dt.yaml: example-0: eud@88e0000:reg:1: [0, 143532032, 0, 4096] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1558347

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V1 1/8] dt-bindings: Add the yaml bindings for EUD
  2021-11-23  4:28 ` [PATCH V1 1/8] dt-bindings: Add the yaml bindings for EUD Souradeep Chowdhury
  2021-11-23 16:34   ` Rob Herring
@ 2021-11-24  3:38   ` Bjorn Andersson
  2021-11-24 10:12     ` schowdhu
  1 sibling, 1 reply; 12+ messages in thread
From: Bjorn Andersson @ 2021-11-24  3:38 UTC (permalink / raw)
  To: Souradeep Chowdhury
  Cc: linux-arm-msm, linux-usb, devicetree, pure.logic, greg,
	linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu

On Mon 22 Nov 20:28 PST 2021, Souradeep Chowdhury wrote:

> Documentation for Embedded USB Debugger(EUD) device tree
> bindings in yaml format.
> 
> Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
> ---
>  .../devicetree/bindings/soc/qcom/qcom,eud.yaml     | 52 ++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
> new file mode 100644
> index 0000000..724552c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm Embedded USB Debugger
> +
> +maintainers:
> +  - Souradeep Chowdhury <schowdhu@codeaurora.org>
> +
> +description: |

The '|' indicates that the formatting is significant, but it's not.

> +  This binding is used to describe the Qualcomm Embedded USB Debugger, which is
> +  mini USB-hub implemented on chip to support USB-based debug capabilities.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,sc7280-eud
> +      - const: qcom,eud
> +
> +  reg:
> +    items:
> +      - description: EUD Base Register Region
> +      - description: EUD Mode Manager Register
> +
> +  interrupts:
> +    description:
> +      EUD interrupt
> +
> +

Drop one of these two empty lines please.

> +  port:
> +    description:
> +      Any connector to the data bus of this controller should be modelled
> +      using the OF graph bindings specified, if the "usb-role-switch"
> +      property is used. See graph.txt

This description does unfortunately not help me to understand what to
point this port to.

What's "the data bus"?

Is usb-role-switch a property to be put in this node? Doesn't it need to
be mentioned as a valid property?

> +    $ref: /schemas/graph.yaml#/properties/port
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    eud@88e0000 {
> +           compatible = "qcom,sc7280-eud","qcom,eud";
> +           reg = <0 0x88e0000 0 0x2000>,
> +                 <0 0x88e2000 0 0x1000>;

The example is compiled with #address-cells == #size-cells == 1, so drop
the four lone 0s from the reg.

Regards,
Bjorn

> +    };
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V1 1/8] dt-bindings: Add the yaml bindings for EUD
  2021-11-24  3:38   ` Bjorn Andersson
@ 2021-11-24 10:12     ` schowdhu
  0 siblings, 0 replies; 12+ messages in thread
From: schowdhu @ 2021-11-24 10:12 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: linux-arm-msm, linux-usb, devicetree, pure.logic, greg,
	linux-kernel, tsoni, psodagud, satyap, pheragu, rnayak, sibis,
	saiprakash.ranjan, quic_schowdhu

On 2021-11-24 09:08, Bjorn Andersson wrote:
> On Mon 22 Nov 20:28 PST 2021, Souradeep Chowdhury wrote:
> 
>> Documentation for Embedded USB Debugger(EUD) device tree
>> bindings in yaml format.
>> 
>> Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
>> ---
>>  .../devicetree/bindings/soc/qcom/qcom,eud.yaml     | 52 
>> ++++++++++++++++++++++
>>  1 file changed, 52 insertions(+)
>>  create mode 100644 
>> Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml 
>> b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
>> new file mode 100644
>> index 0000000..724552c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
>> @@ -0,0 +1,52 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Qualcomm Embedded USB Debugger
>> +
>> +maintainers:
>> +  - Souradeep Chowdhury <schowdhu@codeaurora.org>
>> +
>> +description: |
> 
> The '|' indicates that the formatting is significant, but it's not.

Ack

> 
>> +  This binding is used to describe the Qualcomm Embedded USB 
>> Debugger, which is
>> +  mini USB-hub implemented on chip to support USB-based debug 
>> capabilities.
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - enum:
>> +          - qcom,sc7280-eud
>> +      - const: qcom,eud
>> +
>> +  reg:
>> +    items:
>> +      - description: EUD Base Register Region
>> +      - description: EUD Mode Manager Register
>> +
>> +  interrupts:
>> +    description:
>> +      EUD interrupt
>> +
>> +
> 
> Drop one of these two empty lines please.

Ack

> 
>> +  port:
>> +    description:
>> +      Any connector to the data bus of this controller should be 
>> modelled
>> +      using the OF graph bindings specified, if the "usb-role-switch"
>> +      property is used. See graph.txt
> 
> This description does unfortunately not help me to understand what to
> point this port to.
> 
> What's "the data bus"?
> 
> Is usb-role-switch a property to be put in this node? Doesn't it need 
> to
> be mentioned as a valid property?

The end point of this port is attached to the connector child of dwc3 
node. The dwc3 node has the "usb-role-switch"
property. So "usb-role-switch" is not a valid property of the EUD node.
Will update the description with more clarity accordingly.


> 
>> +    $ref: /schemas/graph.yaml#/properties/port
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    eud@88e0000 {
>> +           compatible = "qcom,sc7280-eud","qcom,eud";
>> +           reg = <0 0x88e0000 0 0x2000>,
>> +                 <0 0x88e2000 0 0x1000>;
> 
> The example is compiled with #address-cells == #size-cells == 1, so 
> drop
> the four lone 0s from the reg.

Ack

> 
> Regards,
> Bjorn
> 
>> +    };
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
>> member
>> of Code Aurora Forum, hosted by The Linux Foundation
>> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2021-11-24 10:12 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-23  4:28 [PATCH V1 0/8] Add Embedded USB Debugger (EUD) driver Souradeep Chowdhury
2021-11-23  4:28 ` [PATCH V1 1/8] dt-bindings: Add the yaml bindings for EUD Souradeep Chowdhury
2021-11-23 16:34   ` Rob Herring
2021-11-24  3:38   ` Bjorn Andersson
2021-11-24 10:12     ` schowdhu
2021-11-23  4:28 ` [PATCH V1 2/8] dt-bindings: connector: Add property for EUD type-C connector Souradeep Chowdhury
2021-11-23  4:28 ` [PATCH V1 3/8] bindings: usb: dwc3: Update dwc3 properties for EUD connector Souradeep Chowdhury
2021-11-23  4:28 ` [PATCH V1 4/8] usb: dwc3: drd: Register the eud connector child node for dwc3 Souradeep Chowdhury
2021-11-23  4:28 ` [PATCH V1 5/8] soc: qcom: eud: Add driver support for Embedded USB Debugger(EUD) Souradeep Chowdhury
2021-11-23  4:28 ` [PATCH V1 6/8] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector Souradeep Chowdhury
2021-11-23  4:28 ` [PATCH V1 7/8] arm64: dts: qcom: sc7280: Set the default dr_mode for usb2 Souradeep Chowdhury
2021-11-23  4:28 ` [PATCH V1 8/8] MAINTAINERS: Add maintainer entry for EUD Souradeep Chowdhury

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).