linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
To: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: <arnd@arndb.de>, <robh+dt@kernel.org>,
	Marek Vasut <marex@denx.de>, <jagan@amarulasolutions.com>,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	Marcin Sloniewski <marcin.sloniewski@gmail.com>,
	Ahmad Fatoum <a.fatoum@pengutronix.de>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<kuba@kernel.org>, Lee Jones <lee.jones@linaro.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [Linux-stm32] [PATCH 03/13] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
Date: Fri, 16 Apr 2021 17:52:17 +0200	[thread overview]
Message-ID: <c329f116-458c-0d33-3c8f-ee5d22189ca4@foss.st.com> (raw)
In-Reply-To: <20210415101037.1465-4-alexandre.torgue@foss.st.com>

On 4/15/21 12:10 PM, Alexandre Torgue wrote:
> Prevent warning seen with "make dtbs_check W=1" command:
> 
> Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary
> address-cells/size-cells without "ranges" or child "reg" property
> 
> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Hi Alexandre,

Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>

Thanks,
Fabrice
> 
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index 41e0087bdbf9..8748d5850298 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -283,8 +283,6 @@
>  		};
>  
>  		timers13: timers@40001c00 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40001C00 0x400>;
>  			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
> @@ -299,8 +297,6 @@
>  		};
>  
>  		timers14: timers@40002000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40002000 0x400>;
>  			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
> @@ -633,8 +629,6 @@
>  		};
>  
>  		timers10: timers@40014400 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40014400 0x400>;
>  			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
> @@ -649,8 +643,6 @@
>  		};
>  
>  		timers11: timers@40014800 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40014800 0x400>;
>  			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
> diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
> index e1df603fc981..72c1b76684b6 100644
> --- a/arch/arm/boot/dts/stm32f746.dtsi
> +++ b/arch/arm/boot/dts/stm32f746.dtsi
> @@ -265,8 +265,6 @@
>  		};
>  
>  		timers13: timers@40001c00 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40001C00 0x400>;
>  			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
> @@ -281,8 +279,6 @@
>  		};
>  
>  		timers14: timers@40002000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40002000 0x400>;
>  			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
> @@ -531,8 +527,6 @@
>  		};
>  
>  		timers10: timers@40014400 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40014400 0x400>;
>  			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
> @@ -547,8 +541,6 @@
>  		};
>  
>  		timers11: timers@40014800 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40014800 0x400>;
>  			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
> diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
> index 05ecdf9ff03a..6e42ca2dada2 100644
> --- a/arch/arm/boot/dts/stm32h743.dtsi
> +++ b/arch/arm/boot/dts/stm32h743.dtsi
> @@ -485,8 +485,6 @@
>  		};
>  
>  		lptimer4: timer@58002c00 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
>  			compatible = "st,stm32-lptimer";
>  			reg = <0x58002c00 0x400>;
>  			clocks = <&rcc LPTIM4_CK>;
> @@ -501,8 +499,6 @@
>  		};
>  
>  		lptimer5: timer@58003000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
>  			compatible = "st,stm32-lptimer";
>  			reg = <0x58003000 0x400>;
>  			clocks = <&rcc LPTIM5_CK>;
> 

  reply	other threads:[~2021-04-16 15:53 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-15 10:10 [PATCH 00/13] ARM: dts: stm32: fix "make dtbs_check W=1" round1 Alexandre Torgue
2021-04-15 10:10 ` [PATCH 01/13] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Alexandre Torgue
2021-04-15 10:10 ` [PATCH 02/13] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Alexandre Torgue
2021-04-15 10:10 ` [PATCH 03/13] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Alexandre Torgue
2021-04-16 15:52   ` Fabrice Gasnier [this message]
2021-04-15 10:10 ` [PATCH 04/13] dt-bindings: mfd: stm32-timers: remove #address/size cells from required properties Alexandre Torgue
2021-04-16 15:52   ` [Linux-stm32] " Fabrice Gasnier
2021-04-20 20:04   ` Rob Herring
2021-06-01 16:26   ` Lee Jones
2021-04-15 10:10 ` [PATCH 05/13] ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings Alexandre Torgue
2021-04-15 10:10 ` [PATCH 06/13] ARM: dts: stm32: fix i2c node name on stm32f746 " Alexandre Torgue
2021-04-15 10:10 ` [PATCH 07/13] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Alexandre Torgue
2021-04-15 10:10 ` [PATCH 08/13] dt-bindings: net: document ptp_ref clk in dwmac Alexandre Torgue
2021-04-20 20:05   ` Rob Herring
2021-04-15 10:10 ` [PATCH 09/13] ARM: dts: stm32: fix stpmic node for stm32mp1 boards Alexandre Torgue
2021-06-10 14:33   ` Alexandre TORGUE
2021-04-15 10:10 ` [PATCH 10/13] dt-bindings: mfd: add vref_ddr-supply to st,stpmic1 yaml Alexandre Torgue
2021-04-15 10:51   ` Ahmad Fatoum
2021-04-15 12:12     ` Alexandre TORGUE
2021-04-15 10:10 ` [PATCH 11/13] ARM: dts: stm32: fix LTDC port node on STM32 MCU ad MPU Alexandre Torgue
2021-04-15 13:21   ` Marek Vasut
2021-04-15 13:34     ` Alexandre TORGUE
2021-04-15 14:30       ` Marek Vasut
2021-04-15 14:35         ` Alexandre TORGUE
2021-04-15 14:59           ` Marek Vasut
2021-04-15 10:10 ` [PATCH 12/13] ARM: dts: stm32: fix DSI port node on STM32MP15 Alexandre Torgue
2021-04-15 10:43   ` Ahmad Fatoum
2021-04-15 12:23     ` Alexandre TORGUE
2021-04-19 13:57       ` Arnd Bergmann
2021-04-19 14:04         ` Alexandre TORGUE
2021-05-04 13:16         ` Ahmad Fatoum
2021-04-15 10:10 ` [PATCH 13/13] ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 Alexandre Torgue
2021-06-01 10:37 ` [PATCH 00/13] ARM: dts: stm32: fix "make dtbs_check W=1" round1 Alexandre TORGUE

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c329f116-458c-0d33-3c8f-ee5d22189ca4@foss.st.com \
    --to=fabrice.gasnier@foss.st.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=alexandre.torgue@foss.st.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=jagan@amarulasolutions.com \
    --cc=kuba@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=marcin.sloniewski@gmail.com \
    --cc=marex@denx.de \
    --cc=robh+dt@kernel.org \
    --subject='Re: [Linux-stm32] [PATCH 03/13] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).