Re: [PATCH v2] x86/hotplug: Do not put offline vCPUs in mwait idle state

["Srivatsa S. Bhat" <srivatsa@csail.mit.edu>]

Hi Igor and Sean,

On 1/20/23 10:35 AM, Sean Christopherson wrote:
> On Fri, Jan 20, 2023, Igor Mammedov wrote:
>> On Fri, 20 Jan 2023 05:55:11 -0800
>> "Srivatsa S. Bhat" <srivatsa@csail.mit.edu> wrote:
>>
>>> Hi Igor and Thomas,
>>>
>>> Thank you for your review!
>>>
>>> On 1/19/23 1:12 PM, Thomas Gleixner wrote:
>>>> On Mon, Jan 16 2023 at 15:55, Igor Mammedov wrote:  
>>>>> "Srivatsa S. Bhat" <srivatsa@csail.mit.edu> wrote:  
>>>>>> Fix this by preventing the use of mwait idle state in the vCPU offline
>>>>>> play_dead() path for any hypervisor, even if mwait support is
>>>>>> available.  
>>>>>
>>>>> if mwait is enabled, it's very likely guest to have cpuidle
>>>>> enabled and using the same mwait as well. So exiting early from
>>>>>  mwait_play_dead(), might just punt workflow down:
>>>>>   native_play_dead()
>>>>>         ...
>>>>>         mwait_play_dead();
>>>>>         if (cpuidle_play_dead())   <- possible mwait here                                              
>>>>>                 hlt_play_dead(); 
>>>>>
>>>>> and it will end up in mwait again and only if that fails
>>>>> it will go HLT route and maybe transition to VMM.  
>>>>
>>>> Good point.
>>>>   
>>>>> Instead of workaround on guest side,
>>>>> shouldn't hypervisor force VMEXIT on being uplugged vCPU when it's
>>>>> actually hot-unplugging vCPU? (ex: QEMU kicks vCPU out from guest
>>>>> context when it is removing vCPU, among other things)  
>>>>
>>>> For a pure guest side CPU unplug operation:
>>>>
>>>>     guest$ echo 0 >/sys/devices/system/cpu/cpu$N/online
>>>>
>>>> the hypervisor is not involved at all. The vCPU is not removed in that
>>>> case.
>>>>   
>>>
>>> Agreed, and this is indeed the scenario I was targeting with this patch,
>>> as opposed to vCPU removal from the host side. I'll add this clarification
>>> to the commit message.
> 
> Forcing HLT doesn't solve anything, it's perfectly legal to passthrough HLT.  I
> guarantee there are use cases that passthrough HLT but _not_ MONITOR/MWAIT, and
> that passthrough all of them.
> 
>> commit message explicitly said:
>> "which prevents the hypervisor from running other vCPUs or workloads on the
>> corresponding pCPU."
>>
>> and that implies unplug on hypervisor side as well.
>> Why? That's because when hypervisor exposes mwait to guest, it has to reserve/pin
>> a pCPU for each of present vCPUs. And you can safely run other VMs/workloads
>> on that pCPU only after it's not possible for it to be reused by VM where
>> it was used originally.
> 
> Pinning isn't strictly required from a safety perspective.  The latency of context
> switching may suffer due to wake times, but preempting a vCPU that it's C1 (or
> deeper) won't cause functional problems.   Passing through an entire socket
> (or whatever scope triggers extra fun) might be a different story, but pinning
> isn't strictly required.
> 
> That said, I 100% agree that this is expected behavior and not a bug.  Letting the
> guest execute MWAIT or HLT means the host won't have perfect visibility into guest
> activity state.
> 
> Oversubscribing a pCPU and exposing MWAIT and/or HLT to vCPUs is generally not done
> precisely because the guest will always appear busy without extra effort on the
> host.  E.g. KVM requires an explicit opt-in from userspace to expose MWAIT and/or
> HLT.
> 
> If someone really wants to effeciently oversubscribe pCPUs and passthrough MWAIT,
> then their best option is probably to have a paravirt interface so that the guest
> can tell the host its offlining a vCPU.  Barring that the host could inspect the
> guest when preempting a vCPU to try and guesstimate how much work the vCPU is
> actually doing in order to make better scheduling decisions.
> 
>> Now consider following worst (and most likely) case without unplug
>> on hypervisor side:
>>
>>  1. vm1mwait: pin pCPU2 to vCPU2
>>  2. vm1mwait: guest$ echo 0 >/sys/devices/system/cpu/cpu2/online
>>         -> HLT -> VMEXIT
>>  --
>>  3. vm2mwait: pin pCPU2 to vCPUx and start VM
>>  4. vm2mwait: guest OS onlines Vcpu and starts using it incl.
>>        going into idle=>mwait state
>>  --
>>  5. vm1mwait: it still thinks that vCPU is present it can rightfully do:
>>        guest$ echo 1 >/sys/devices/system/cpu/cpu2/online
>>  --              
>>  6.1 best case vm1mwait online fails after timeout
>>  6.2 worse case: vm2mwait does VMEXIT on vCPUx around time-frame when
>>      vm1mwait onlines vCPU2, the online may succeed and then vm2mwait's
>>      vCPUx will be stuck (possibly indefinitely) until for some reason
>>      VMEXIT happens on vm1mwait's vCPU2 _and_ host decides to schedule
>>      vCPUx on pCPU2 which would make vm1mwait stuck on vCPU2.
>> So either way it's expected behavior.
>>
>> And if there is no intention to unplug vCPU on hypervisor side,
>> then VMEXIT on play_dead is not really necessary (mwait is better
>> then HLT), since hypervisor can't safely reuse pCPU elsewhere and
>> VCPU goes into deep sleep within guest context.
>>
>> PS:
>> The only case where making HLT/VMEXIT on play_dead might work out,
>> would be if new workload weren't pinned to the same pCPU nor
>> used mwait (i.e. host can migrate it elsewhere and schedule
>> vCPU2 back on pCPU2).


That makes sense. Thank you both for the detailed explanation!
Let's drop this patch.

Regards,
Srivatsa
VMware Photon OS