linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	agross@kernel.org, bjorn.andersson@linaro.org,
	lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
	plai@codeaurora.org, bgoswami@codeaurora.org, perex@perex.cz,
	tiwai@suse.com, rohitkr@codeaurora.org,
	linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	swboyd@chromium.org, judyhsiao@chromium.org
Cc: "Venkata Prasad Potturu (Temp)" <potturu@codeaurora.org>
Subject: Re: [PATCH v6 2/2] ASoC: qcom: SC7280: Add machine driver
Date: Fri, 3 Dec 2021 16:51:02 +0530	[thread overview]
Message-ID: <c68f85f1-b4a8-6abe-35c8-afa2ae373a77@codeaurora.org> (raw)
In-Reply-To: <5d0ca118-2a38-a7cf-ebec-f28f98078583@linaro.org>


On 12/1/2021 10:03 PM, Srinivas Kandagatla wrote:
Thanks for Your time Srini!!!
>
> On 18/11/2021 12:45, Srinivasa Rao Mandadapu wrote:
>> Add new machine driver to register sound card on sc7280 based targets 
>> and
>> do the required configuration for lpass cpu dai and external codecs
>> connected over MI2S and soundwire interfaces.
>> Add support for audio jack detection, soundwire init and MBHC.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
>> ---
>>   sound/soc/qcom/Kconfig  |  12 ++
>>   sound/soc/qcom/Makefile |   2 +
>>   sound/soc/qcom/sc7280.c | 299 
>> ++++++++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 313 insertions(+)
>>   create mode 100644 sound/soc/qcom/sc7280.c
>>
>> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
>> index cc7c1de..530d01f 100644
>> --- a/sound/soc/qcom/Kconfig
>> +++ b/sound/soc/qcom/Kconfig
>> @@ -152,4 +152,16 @@ config SND_SOC_SC7180
>>         SC7180 SoC-based systems.
>>         Say Y if you want to use audio device on this SoCs.
>>   +config SND_SOC_SC7280
>> +    tristate "SoC Machine driver for SC7280 boards"
>> +    depends on I2C && SOUNDWIRE || COMPILE_TEST
>> +    select SND_SOC_QCOM_COMMON
>> +    select SND_SOC_MAX98357A
>> +    select SND_SOC_LPASS_RX_MACRO
>> +    select SND_SOC_LPASS_TX_MACRO
>
> Consider adding
>
> +    select SND_SOC_LPASS_SC7280
> +    select SND_SOC_WCD938X
>
>
> and remove them from "[PATCH v6 10/10] ASoC: qcom: SC7280: Update 
> config for building codec dma drivers"
>
Okay.. Will do accordingly.
>
>> +      Add support for audio on Qualcomm Technologies Inc.
>> +      SC7280 SoC-based systems.
>> +      Say Y or M if you want to use audio device on this SoCs.
>> +
>>   endif #SND_SOC_QCOM
>> diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
>> index 1600ae5..625aec6 100644
>> --- a/sound/soc/qcom/Makefile
>> +++ b/sound/soc/qcom/Makefile
>> @@ -19,6 +19,7 @@ snd-soc-storm-objs := storm.o
>>   snd-soc-apq8016-sbc-objs := apq8016_sbc.o
>>   snd-soc-apq8096-objs := apq8096.o
>>   snd-soc-sc7180-objs := sc7180.o
>> +snd-soc-sc7280-objs := sc7280.o
>>   snd-soc-sdm845-objs := sdm845.o
>>   snd-soc-sm8250-objs := sm8250.o
>>   snd-soc-qcom-common-objs := common.o
>> @@ -27,6 +28,7 @@ obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
>>   obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
>>   obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
>>   obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
>> +obj-$(CONFIG_SND_SOC_SC7280) += snd-soc-sc7280.o
>>   obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
>>   obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o
>>   obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
>> diff --git a/sound/soc/qcom/sc7280.c b/sound/soc/qcom/sc7280.c
>> new file mode 100644
>> index 0000000..c20d4ab1
>> --- /dev/null
>> +++ b/sound/soc/qcom/sc7280.c
>> @@ -0,0 +1,299 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +//
>> +// Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>> +//
>> +// ALSA SoC Machine driver for sc7280
>> +
>> +#include <linux/gpio.h>
>> +#include <linux/gpio/consumer.h>
> Why do we need this?
Will remove it.
>
>> +#include <linux/input.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <sound/core.h>
>> +#include <sound/jack.h>
>> +#include <sound/pcm.h>
>> +#include <sound/soc.h>
>> +
>> +#include <dt-bindings/sound/sc7180-lpass.h>
>> +#include <dt-bindings/sound/qcom,q6afe.h>
> Why this include?
>
Okay. Will remove it.
>> +
>> +#include "../codecs/wcd938x.h"
>
> Why do we need the codec header file here?
Okay. will replace with #include <linux/soundwire/sdw.h> for sound wire 
stream init functions.
>
>> +#include "common.h"
>> +#include "lpass.h"
>> +
>> +#define LPASS_MAX_PORTS  (LPASS_CDC_DMA_VA_TX8 + 1)
>
> May be add this in lpass.h instead of machine file.
Okay. Will change accordingly.
>
>> +
>> +struct sc7280_snd_data {
>> +    bool stream_prepared[LPASS_MAX_PORTS];
> move this to the end of struct.
Okay.
>
>> +    struct snd_soc_card card;
>> +    struct sdw_stream_runtime *sruntime[LPASS_MAX_PORTS];
>> +    struct snd_soc_jack hs_jack;
>> +    struct snd_soc_jack hdmi_jack;
>> +    bool jack_setup;
>> +};
>> +
>> +static void sc7280_jack_free(struct snd_jack *jack)
>> +{
>> +    struct snd_soc_component *component = jack->private_data;
>> +
>> +    snd_soc_component_set_jack(component, NULL, NULL);
>> +}
>> +
>> +static int sc7280_headset_init(struct snd_soc_pcm_runtime *rtd)
>> +{
>> +    struct snd_soc_card *card = rtd->card;
>> +    struct sc7280_snd_data *pdata = snd_soc_card_get_drvdata(card);
>> +    struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
>> +    struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
>> +    struct snd_soc_component *component = codec_dai->component;
>> +    struct snd_jack *jack;
>> +    int rval, i;
>> +
>> +    if (!pdata->jack_setup) {
>> +        rval = snd_soc_card_jack_new(card, "Headset Jack",
>> +                            SND_JACK_HEADSET | SND_JACK_LINEOUT |
>> +                            SND_JACK_MECHANICAL |
>> +                            SND_JACK_BTN_0 | SND_JACK_BTN_1 |
>> +                            SND_JACK_BTN_2 | SND_JACK_BTN_3 |
>> +                            SND_JACK_BTN_4 | SND_JACK_BTN_5,
>> +                            &pdata->hs_jack, NULL, 0);
>> +
>> +        if (rval < 0) {
>> +            dev_err(card->dev, "Unable to add Headset Jack\n");
>> +            return rval;
>> +        }
>> +
>> +        jack = pdata->hs_jack.jack;
>> +
>> +        snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
>> +        snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
>> +        snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
>> +        snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
>> +
>> +        jack->private_data = component;
>> +        jack->private_free = sc7280_jack_free;
>> +        pdata->jack_setup = true;
>> +    }
>> +    switch (cpu_dai->id) {
>> +    case LPASS_CDC_DMA_RX0:
>> +    case LPASS_CDC_DMA_TX3:
>> +        for_each_rtd_codec_dais(rtd, i, codec_dai) {
>> +            rval = snd_soc_component_set_jack(component, 
>> &pdata->hs_jack, NULL);
>> +            if (rval != 0 && rval != -ENOTSUPP) {
>> +                dev_err(card->dev, "Failed to set jack: %d\n", rval);
>> +                return rval;
>> +            }
>> +        }
>> +
>> +        break;
>> +    default:
>> +        break;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int sc7280_hdmi_init(struct snd_soc_pcm_runtime *rtd)
>> +{
>> +    struct snd_soc_card *card = rtd->card;
>> +    struct sc7280_snd_data *pdata = snd_soc_card_get_drvdata(card);
>> +    struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
>> +    struct snd_soc_component *component = codec_dai->component;
>> +    struct snd_jack *jack;
>> +    int rval;
>> +
>> +    rval = snd_soc_card_jack_new(
>> +            card, "HDMI Jack",
>> +            SND_JACK_LINEOUT,
>> +            &pdata->hdmi_jack, NULL, 0);
>
> you could probably warp this up to 100 chars
Okay.
>
>> +
>> +    if (rval < 0) {
>> +        dev_err(card->dev, "Unable to add HDMI Jack\n");
>> +        return rval;
>> +    }
>> +
>> +    jack = pdata->hdmi_jack.jack;
>> +    jack->private_data = component;
>> +    jack->private_free = sc7280_jack_free;
>> +
>> +    return snd_soc_component_set_jack(component, &pdata->hdmi_jack, 
>> NULL);
>> +}
>> +
>> +static int sc7280_init(struct snd_soc_pcm_runtime *rtd)
>> +{
>> +    struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
>> +
>> +    switch (cpu_dai->id) {
>> +    case LPASS_CDC_DMA_TX3:
>> +        return sc7280_headset_init(rtd);
>> +    case LPASS_CDC_DMA_RX0:
>> +    case LPASS_CDC_DMA_VA_TX0:
>> +    case MI2S_SECONDARY:
>> +        return 0;
>> +    case LPASS_DP_RX:
>> +        return sc7280_hdmi_init(rtd);
>> +    default:
>> +        dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__, 
>> cpu_dai->id);
>> +    }
>> +
>> +    return -EINVAL;
>> +}
>> +
>> +static int sc7280_snd_hw_params(struct snd_pcm_substream *substream,
>> +                struct snd_pcm_hw_params *params)
>> +{
>> +    struct snd_pcm_runtime *runtime = substream->runtime;
>> +    struct snd_soc_pcm_runtime *rtd = substream->private_data;
>> +    struct snd_soc_dai *codec_dai;
>> +    const struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
>> +    struct sc7280_snd_data *pdata = 
>> snd_soc_card_get_drvdata(rtd->card);
>> +    struct sdw_stream_runtime *sruntime;
>> +    int i;
>> +
>> +    snd_pcm_hw_constraint_minmax(runtime, 
>> SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
>> +    snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_RATE, 
>> 48000, 48000);
>> +
>> +    switch (cpu_dai->id) {
>> +    case LPASS_CDC_DMA_TX3:
>> +    case LPASS_CDC_DMA_RX0:
>> +        for_each_rtd_codec_dais(rtd, i, codec_dai) {
>> +            sruntime = snd_soc_dai_get_sdw_stream(codec_dai, 
>> substream->stream);
>> +            if (sruntime != ERR_PTR(-ENOTSUPP))
>> +                pdata->sruntime[cpu_dai->id] = sruntime;
>> +        }
>> +        break;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int sc7280_snd_swr_prepare(struct snd_pcm_substream *substream)
>> +{
>> +    struct snd_soc_pcm_runtime *rtd = substream->private_data;
>> +    const struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
>> +    struct sc7280_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
>> +    struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
>> +    int ret;
>> +
>> +    if (!sruntime)
>> +        return 0;
>> +
>> +    if (data->stream_prepared[cpu_dai->id]) {
>> +        sdw_disable_stream(sruntime);
>> +        sdw_deprepare_stream(sruntime);
>> +        data->stream_prepared[cpu_dai->id] = false;
>> +    }
>> +
>> +    ret = sdw_prepare_stream(sruntime);
>> +    if (ret)
>> +        return ret;
>> +
>> +    ret = sdw_enable_stream(sruntime);
>> +    if (ret) {
>> +        sdw_deprepare_stream(sruntime);
>> +        return ret;
>> +    }
>> +    data->stream_prepared[cpu_dai->id] = true;
>> +
>> +    return ret;
>> +}
>> +
>> +static int sc7280_snd_prepare(struct snd_pcm_substream *substream)
>> +{
>> +    struct snd_soc_pcm_runtime *rtd = substream->private_data;
>> +    const struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
>> +
>> +    switch (cpu_dai->id) {
>> +    case LPASS_CDC_DMA_RX0:
>> +    case LPASS_CDC_DMA_TX3:
>> +        return sc7280_snd_swr_prepare(substream);
>> +    default:
>> +        break;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int sc7280_snd_hw_free(struct snd_pcm_substream *substream)
>> +{
>> +    struct snd_soc_pcm_runtime *rtd = substream->private_data;
>> +    struct sc7280_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
>> +    const struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
>> +    struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
>> +
>> +    switch (cpu_dai->id) {
>> +    case LPASS_CDC_DMA_RX0:
>> +    case LPASS_CDC_DMA_TX3:
>> +        if (sruntime && data->stream_prepared[cpu_dai->id]) {
>> +            sdw_disable_stream(sruntime);
>> +            sdw_deprepare_stream(sruntime);
>> +            data->stream_prepared[cpu_dai->id] = false;
>> +        }
>> +        break;
>> +    default:
>> +        break;
>> +    }
>> +    return 0;
>> +}
>> +
>> +static const struct snd_soc_ops sc7280_ops = {
>> +    .hw_params = sc7280_snd_hw_params,
>> +    .hw_free = sc7280_snd_hw_free,
>> +    .prepare = sc7280_snd_prepare,
>> +};
>> +
>> +static const struct snd_soc_dapm_widget sc7280_snd_widgets[] = {
>> +    SND_SOC_DAPM_HP("Headphone Jack", NULL),
>> +    SND_SOC_DAPM_MIC("Headset Mic", NULL),
>> +};
>> +
>> +static int sc7280_snd_platform_probe(struct platform_device *pdev)
>> +{
>> +    struct snd_soc_card *card;
>> +    struct sc7280_snd_data *data;
>> +    struct device *dev = &pdev->dev;
>> +    struct snd_soc_dai_link *link;
>> +    int ret, i;
>> +
>> +    data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> +    if (!data)
>> +        return -ENOMEM;
>> +
>> +    card = &data->card;
>> +    snd_soc_card_set_drvdata(card, data);
>> +
>> +    card->owner = THIS_MODULE;
>> +    card->driver_name = "SC7280";
>> +    card->dev = dev;
>> +
>> +    ret = qcom_snd_parse_of(card);
>> +    if (ret)
>> +        return ret;
>> +
>> +    for_each_card_prelinks(card, i, link) {
>> +        link->init = sc7280_init;
>> +        link->ops = &sc7280_ops;
>> +    }
>> +
>> +    return devm_snd_soc_register_card(dev, card);
>> +}
>> +
>> +static const struct of_device_id sc7280_snd_device_id[]  = {
>> +    { .compatible = "google,sc7280-herobrine" },
>> +    {}
>> +};
>> +MODULE_DEVICE_TABLE(of, sc7280_snd_device_id);
>> +
>> +static struct platform_driver sc7280_snd_driver = {
>> +    .probe = sc7280_snd_platform_probe,
>> +    .driver = {
>> +        .name = "msm-snd-sc7280",
>> +        .of_match_table = sc7280_snd_device_id,
>> +        .pm = &snd_soc_pm_ops,
>> +    },
>> +};
>> +module_platform_driver(sc7280_snd_driver);
>> +
>> +MODULE_DESCRIPTION("sc7280 ASoC Machine Driver");
>> +MODULE_LICENSE("GPL v2");
> "GPL" should be good enough here.
Okay.
>
> --srini
>>
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


      reply	other threads:[~2021-12-03 11:21 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-18 12:45 [PATCH v6 0/2] Machine driver to support LPASS SC7280 sound card registration Srinivasa Rao Mandadapu
2021-11-18 12:45 ` [PATCH v6 1/2] ASoC: google: dt-bindings: Add sc7280-herobrine machine bindings Srinivasa Rao Mandadapu
2021-11-18 13:58   ` Rob Herring
2021-11-18 12:45 ` [PATCH v6 2/2] ASoC: qcom: SC7280: Add machine driver Srinivasa Rao Mandadapu
2021-12-01 16:33   ` Srinivas Kandagatla
2021-12-03 11:21     ` Srinivasa Rao Mandadapu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c68f85f1-b4a8-6abe-35c8-afa2ae373a77@codeaurora.org \
    --to=srivasam@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bgoswami@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=judyhsiao@chromium.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=plai@codeaurora.org \
    --cc=potturu@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=rohitkr@codeaurora.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=swboyd@chromium.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).