[PATCH 4.9 00/30] 4.9.330-rc1 review

[PATCH 4.9 00/30] 4.9.330-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.330 release.
There are 30 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 28 Sep 2022 10:07:26 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.330-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.330-rc1

Jan Kara <jack@suse.cz>
    ext4: make directory inode spreading reflect flexbg size

Vitaly Kuznetsov <vkuznets@redhat.com>
    Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region

Stefan Haberland <sth@linux.ibm.com>
    s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: Create uart_xmit_advance()

Sean Anderson <seanga2@gmail.com>
    net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD

Adrian Hunter <adrian.hunter@intel.com>
    perf kcore_copy: Do not check /proc/modules is unchanged

Marc Kleine-Budde <mkl@pengutronix.de>
    can: gs_usb: gs_can_open(): fix race dev->can.state condition

Randy Dunlap <rdunlap@infradead.org>
    MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko

Benjamin Poirier <bpoirier@nvidia.com>
    net: team: Unsync device addresses on ndo_stop

Lu Wei <luwei32@huawei.com>
    ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header

David Leadbeater <dgl@dgl.cx>
    netfilter: nf_conntrack_irc: Tighten matching on DCC message

Igor Ryzhov <iryzhov@nfware.com>
    netfilter: nf_conntrack_sip: fix ct_sip_walk_headers

Chao Yu <chao.yu@oppo.com>
    mm/slub: fix to return errno if kmalloc() fails

Kai Vehmanen <kai.vehmanen@linux.intel.com>
    ALSA: hda: add Intel 5 Series / 3400 PCI DID

Mohan Kumar <mkumard@nvidia.com>
    ALSA: hda/tegra: set depop delay for tegra

Alan Stern <stern@rowland.harvard.edu>
    USB: core: Fix RST error in hub.c

Siddh Raman Pant <code@siddh.me>
    wifi: mac80211: Fix UAF in ieee80211_scan_rx()

Liang He <windhl@126.com>
    arm: mach-spear: Add missing of_node_put() in time.c

Liang He <windhl@126.com>
    mips: lantiq: Add missing of_node_put() in irq.c

Liang He <windhl@126.com>
    mips/pic32/pic32mzda: Fix refcount leak bugs

Liang He <windhl@126.com>
    mips: lantiq: xway: Fix refcount leak bug in sysctrl

Liang He <windhl@126.com>
    mips: lantiq: falcon: Fix refcount leak bug in sysctrl

Yihao Han <hanyihao@vivo.com>
    video: fbdev: simplefb: Check before clk_put() not needed

Hyunwoo Kim <imv4bel@gmail.com>
    video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write

Petr Cvek <petrcvekcz@gmail.com>
    video: fbdev: intelfb: Use aperture size from pci_resource_len

Xiang wangx <wangxiang@cdjrlc.com>
    video: fbdev: skeletonfb: Fix syntax errors in comments

Maxime Ripard <maxime@cerno.tech>
    drm/vc4: crtc: Use an union to store the page flip callback

Stefan Metzmacher <metze@samba.org>
    cifs: don't send down the destination address to sendmsg for a SOCK_STREAM

Yang Yingliang <yangyingliang@huawei.com>
    parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()


-------------

Diffstat:

 Makefile                                |  4 ++--
 arch/arm/mach-spear/time.c              |  8 ++++++--
 arch/mips/lantiq/clk.c                  |  1 +
 arch/mips/lantiq/falcon/sysctrl.c       |  6 ++++++
 arch/mips/lantiq/irq.c                  |  1 +
 arch/mips/lantiq/xway/sysctrl.c         |  4 ++++
 arch/mips/pic32/pic32mzda/init.c        |  7 ++++++-
 arch/mips/pic32/pic32mzda/time.c        |  3 +++
 drivers/gpu/drm/vc4/vc4_crtc.c          | 20 +++++++++++++------
 drivers/hv/vmbus_drv.c                  | 10 +++++++++-
 drivers/net/can/usb/gs_usb.c            |  4 ++--
 drivers/net/ethernet/sun/sunhme.c       |  4 ++--
 drivers/net/ipvlan/ipvlan_core.c        |  6 ++++--
 drivers/net/team/team.c                 | 24 +++++++++++++++++------
 drivers/parisc/ccio-dma.c               |  1 +
 drivers/s390/block/dasd_alias.c         |  9 +++++++--
 drivers/tty/serial/serial-tegra.c       |  5 ++---
 drivers/usb/core/hub.c                  |  2 +-
 drivers/video/fbdev/intelfb/intelfbhw.c | 12 +++++-------
 drivers/video/fbdev/pxa3xx-gcu.c        |  2 +-
 drivers/video/fbdev/simplefb.c          |  3 +--
 drivers/video/fbdev/skeletonfb.c        |  2 +-
 fs/cifs/transport.c                     |  4 ++--
 fs/ext4/ialloc.c                        |  2 +-
 include/linux/serial_core.h             | 17 +++++++++++++++++
 mm/slub.c                               |  5 ++++-
 net/mac80211/scan.c                     | 11 +++++++----
 net/netfilter/nf_conntrack_irc.c        | 34 +++++++++++++++++++++++++++------
 net/netfilter/nf_conntrack_sip.c        |  4 ++--
 sound/pci/hda/hda_intel.c               |  2 ++
 sound/pci/hda/patch_hdmi.c              |  1 +
 tools/perf/util/symbol-elf.c            |  7 ++-----
 32 files changed, 163 insertions(+), 62 deletions(-)

[PATCH 4.9 01/30] parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 38238be4e881a5d0abbe4872b4cd6ed790be06c8 ]

Add missing iounmap() before return from ccio_probe(), if ccio_init_resources()
fails.

Fixes: d46c742f827f ("parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/parisc/ccio-dma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 633762f8d775..84a93ddcd57a 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1569,6 +1569,7 @@ static int __init ccio_probe(struct parisc_device *dev)
 	ioc->ioc_regs = ioremap_nocache(dev->hpa.start, 4096);
 	ccio_ioc_init(ioc);
 	if (ccio_init_resources(ioc)) {
+		iounmap(ioc->ioc_regs);
 		kfree(ioc);
 		return -ENOMEM;
 	}
-- 
2.35.1

[PATCH 4.9 02/30] cifs: dont send down the destination address to sendmsg for a SOCK_STREAM

[Greg Kroah-Hartman]

From: Stefan Metzmacher <metze@samba.org>

commit 17d3df38dc5f4cec9b0ac6eb79c1859b6e2693a4 upstream.

This is ignored anyway by the tcp layer.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/transport.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -140,8 +140,8 @@ smb_send_kvec(struct TCP_Server_Info *se
 
 	*sent = 0;
 
-	smb_msg->msg_name = (struct sockaddr *) &server->dstaddr;
-	smb_msg->msg_namelen = sizeof(struct sockaddr);
+	smb_msg->msg_name = NULL;
+	smb_msg->msg_namelen = 0;
 	smb_msg->msg_control = NULL;
 	smb_msg->msg_controllen = 0;
 	if (server->noblocksnd)

[PATCH 4.9 03/30] drm/vc4: crtc: Use an union to store the page flip callback

[Greg Kroah-Hartman]

From: Maxime Ripard <maxime@cerno.tech>

[ Upstream commit 2523e9dcc3be91bf9fdc0d1e542557ca00bbef42 ]

We'll need to extend the vc4_async_flip_state structure to rely on
another callback implementation, so let's move the current one into a
union.

Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-10-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vc4/vc4_crtc.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 51d34e7275ab..9d97f535a4d6 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -717,17 +717,17 @@ struct vc4_async_flip_state {
 	struct drm_framebuffer *fb;
 	struct drm_pending_vblank_event *event;
 
-	struct vc4_seqno_cb cb;
+	union {
+		struct vc4_seqno_cb seqno;
+	} cb;
 };
 
 /* Called when the V3D execution for the BO being flipped to is done, so that
  * we can actually update the plane's address to point to it.
  */
 static void
-vc4_async_page_flip_complete(struct vc4_seqno_cb *cb)
+vc4_async_page_flip_complete(struct vc4_async_flip_state *flip_state)
 {
-	struct vc4_async_flip_state *flip_state =
-		container_of(cb, struct vc4_async_flip_state, cb);
 	struct drm_crtc *crtc = flip_state->crtc;
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
@@ -749,6 +749,14 @@ vc4_async_page_flip_complete(struct vc4_seqno_cb *cb)
 	up(&vc4->async_modeset);
 }
 
+static void vc4_async_page_flip_seqno_complete(struct vc4_seqno_cb *cb)
+{
+	struct vc4_async_flip_state *flip_state =
+		container_of(cb, struct vc4_async_flip_state, cb.seqno);
+
+	vc4_async_page_flip_complete(flip_state);
+}
+
 /* Implements async (non-vblank-synced) page flips.
  *
  * The page flip ioctl needs to return immediately, so we grab the
@@ -794,8 +802,8 @@ static int vc4_async_page_flip(struct drm_crtc *crtc,
 	drm_atomic_set_fb_for_plane(plane->state, fb);
 	plane->fb = fb;
 
-	vc4_queue_seqno_cb(dev, &flip_state->cb, bo->seqno,
-			   vc4_async_page_flip_complete);
+	vc4_queue_seqno_cb(dev, &flip_state->cb.seqno, bo->seqno,
+			   vc4_async_page_flip_seqno_complete);
 
 	/* Driver takes ownership of state on successful async commit. */
 	return 0;
-- 
2.35.1

[PATCH 4.9 04/30] video: fbdev: skeletonfb: Fix syntax errors in comments

[Greg Kroah-Hartman]

From: Xiang wangx <wangxiang@cdjrlc.com>

[ Upstream commit fc378794a2f7a19cf26010dc33b89ba608d4c70f ]

Delete the redundant word 'its'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/skeletonfb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c
index f948baa16d82..254bb6e2187c 100644
--- a/drivers/video/fbdev/skeletonfb.c
+++ b/drivers/video/fbdev/skeletonfb.c
@@ -96,7 +96,7 @@ static struct fb_fix_screeninfo xxxfb_fix = {
 
     /*
      * 	Modern graphical hardware not only supports pipelines but some 
-     *  also support multiple monitors where each display can have its  
+     *  also support multiple monitors where each display can have
      *  its own unique data. In this case each display could be  
      *  represented by a separate framebuffer device thus a separate 
      *  struct fb_info. Now the struct xxx_par represents the graphics
-- 
2.35.1

[PATCH 4.9 05/30] video: fbdev: intelfb: Use aperture size from pci_resource_len

[Greg Kroah-Hartman]

From: Petr Cvek <petrcvekcz@gmail.com>

[ Upstream commit 25c9a15fb7bbfafb94dd3b4e3165c18b8e1bd039 ]

Aperture size for i9x5 variants is determined from PCI base address.

	if (pci_resource_start(pdev, 2) & 0x08000000)
		*aperture_size = MB(128);
	...

This condition is incorrect as 128 MiB address can have the address
set as 0x?8000000 or 0x?0000000. Also the code can be simplified to just
use pci_resource_len().

The true settings of the aperture size is in the MSAC register, which
could be used instead. However the value is used only as an info message,
so it doesn't matter.

Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/intelfb/intelfbhw.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/video/fbdev/intelfb/intelfbhw.c b/drivers/video/fbdev/intelfb/intelfbhw.c
index d31ed4e2c46f..3aa93565e935 100644
--- a/drivers/video/fbdev/intelfb/intelfbhw.c
+++ b/drivers/video/fbdev/intelfb/intelfbhw.c
@@ -199,13 +199,11 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
 	case PCI_DEVICE_ID_INTEL_945GME:
 	case PCI_DEVICE_ID_INTEL_965G:
 	case PCI_DEVICE_ID_INTEL_965GM:
-		/* 915, 945 and 965 chipsets support a 256MB aperture.
-		   Aperture size is determined by inspected the
-		   base address of the aperture. */
-		if (pci_resource_start(pdev, 2) & 0x08000000)
-			*aperture_size = MB(128);
-		else
-			*aperture_size = MB(256);
+		/*
+		 * 915, 945 and 965 chipsets support 64MB, 128MB or 256MB
+		 * aperture. Determine size from PCI resource length.
+		 */
+		*aperture_size = pci_resource_len(pdev, 2);
 		break;
 	default:
 		if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
-- 
2.35.1

[PATCH 4.9 06/30] video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write

[Greg Kroah-Hartman]

From: Hyunwoo Kim <imv4bel@gmail.com>

[ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ]

In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of
type int.  Then, copy_from_user() may cause a heap overflow because it is used
as the third argument of copy_from_user().

Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/pxa3xx-gcu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c
index 184773b6b9e4..2cca4b763d8d 100644
--- a/drivers/video/fbdev/pxa3xx-gcu.c
+++ b/drivers/video/fbdev/pxa3xx-gcu.c
@@ -391,7 +391,7 @@ pxa3xx_gcu_write(struct file *file, const char *buff,
 	struct pxa3xx_gcu_batch	*buffer;
 	struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file);
 
-	int words = count / 4;
+	size_t words = count / 4;
 
 	/* Does not need to be atomic. There's a lock in user space,
 	 * but anyhow, this is just for statistics. */
-- 
2.35.1

[PATCH 4.9 07/30] video: fbdev: simplefb: Check before clk_put() not needed

[Greg Kroah-Hartman]

From: Yihao Han <hanyihao@vivo.com>

[ Upstream commit 5491424d17bdeb7b7852a59367858251783f8398 ]

clk_put() already checks the clk ptr using !clk and IS_ERR()
so there is no need to check it again before calling it.

Signed-off-by: Yihao Han <hanyihao@vivo.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/simplefb.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/simplefb.c b/drivers/video/fbdev/simplefb.c
index 61f799a515dc..1efdbbc20f99 100644
--- a/drivers/video/fbdev/simplefb.c
+++ b/drivers/video/fbdev/simplefb.c
@@ -231,8 +231,7 @@ static int simplefb_clocks_init(struct simplefb_par *par,
 		if (IS_ERR(clock)) {
 			if (PTR_ERR(clock) == -EPROBE_DEFER) {
 				while (--i >= 0) {
-					if (par->clks[i])
-						clk_put(par->clks[i]);
+					clk_put(par->clks[i]);
 				}
 				kfree(par->clks);
 				return -EPROBE_DEFER;
-- 
2.35.1

[PATCH 4.9 08/30] mips: lantiq: falcon: Fix refcount leak bug in sysctrl

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit 72a2af539fff975caadd9a4db3f99963569bd9c9 ]

In ltq_soc_init(), of_find_compatible_node() will return a node pointer
with refcount incremented. We should use of_node_put() when it is not
used anymore.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lantiq/falcon/sysctrl.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
index 714d92659489..665739bd4190 100644
--- a/arch/mips/lantiq/falcon/sysctrl.c
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -210,6 +210,12 @@ void __init ltq_soc_init(void)
 			of_address_to_resource(np_sysgpe, 0, &res_sys[2]))
 		panic("Failed to get core resources");
 
+	of_node_put(np_status);
+	of_node_put(np_ebu);
+	of_node_put(np_sys1);
+	of_node_put(np_syseth);
+	of_node_put(np_sysgpe);
+
 	if ((request_mem_region(res_status.start, resource_size(&res_status),
 				res_status.name) < 0) ||
 		(request_mem_region(res_ebu.start, resource_size(&res_ebu),
-- 
2.35.1

[PATCH 4.9 09/30] mips: lantiq: xway: Fix refcount leak bug in sysctrl

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit 76695592711ef1e215cc24ed3e1cd857d7fc3098 ]

In ltq_soc_init(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lantiq/xway/sysctrl.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index dd7c36a193e3..6891456a7603 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -457,6 +457,10 @@ void __init ltq_soc_init(void)
 			of_address_to_resource(np_ebu, 0, &res_ebu))
 		panic("Failed to get core resources");
 
+	of_node_put(np_pmu);
+	of_node_put(np_cgu);
+	of_node_put(np_ebu);
+
 	if (!request_mem_region(res_pmu.start, resource_size(&res_pmu),
 				res_pmu.name) ||
 		!request_mem_region(res_cgu.start, resource_size(&res_cgu),
-- 
2.35.1

[PATCH 4.9 10/30] mips/pic32/pic32mzda: Fix refcount leak bugs

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit eb9e9bc4fa5fb489c92ec588b3fb35f042ba6d86 ]

of_find_matching_node(), of_find_compatible_node() and
of_find_node_by_path() will return node pointers with refcout
incremented. We should call of_node_put() when they are not
used anymore.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/pic32/pic32mzda/init.c | 7 ++++++-
 arch/mips/pic32/pic32mzda/time.c | 3 +++
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c
index 406c6c5cec29..f8985d4573e6 100644
--- a/arch/mips/pic32/pic32mzda/init.c
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -131,13 +131,18 @@ static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup)
 		np = of_find_compatible_node(NULL, NULL, lookup->compatible);
 		if (np) {
 			lookup->name = (char *)np->name;
-			if (lookup->phys_addr)
+			if (lookup->phys_addr) {
+				of_node_put(np);
 				continue;
+			}
 			if (!of_address_to_resource(np, 0, &res))
 				lookup->phys_addr = res.start;
+			of_node_put(np);
 		}
 	}
 
+	of_node_put(root);
+
 	return 0;
 }
 
diff --git a/arch/mips/pic32/pic32mzda/time.c b/arch/mips/pic32/pic32mzda/time.c
index 62a0a78b6c64..bfafe241c1b5 100644
--- a/arch/mips/pic32/pic32mzda/time.c
+++ b/arch/mips/pic32/pic32mzda/time.c
@@ -40,6 +40,9 @@ static unsigned int pic32_xlate_core_timer_irq(void)
 		goto default_map;
 
 	irq = irq_of_parse_and_map(node, 0);
+
+	of_node_put(node);
+
 	if (!irq)
 		goto default_map;
 
-- 
2.35.1

[PATCH 4.9 11/30] mips: lantiq: Add missing of_node_put() in irq.c

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit 3748d2185ac4c2c6f80989672253aad909ecaf95 ]

In icu_of_init(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lantiq/irq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index e64f678ca12c..e29dc58271b2 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -460,6 +460,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 		if (!ltq_eiu_membase)
 			panic("Failed to remap eiu memory");
 	}
+	of_node_put(eiu_node);
 
 	return 0;
 }
-- 
2.35.1

[PATCH 4.9 12/30] arm: mach-spear: Add missing of_node_put() in time.c

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit 2c629dd2d14fd7f64a553f809eda6d0b3a4f615a ]

In spear_setup_of_timer(), of_find_matching_node() will return a
node pointer with refcount incrementd. We should use of_node_put()
in each fail path or when it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220616093027.3984903-1-windhl@126.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-spear/time.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index aaaa6781b9fe..57b77c7effa9 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -223,13 +223,13 @@ void __init spear_setup_of_timer(void)
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		pr_err("%s: No irq passed for timer via DT\n", __func__);
-		return;
+		goto err_put_np;
 	}
 
 	gpt_base = of_iomap(np, 0);
 	if (!gpt_base) {
 		pr_err("%s: of iomap failed\n", __func__);
-		return;
+		goto err_put_np;
 	}
 
 	gpt_clk = clk_get_sys("gpt0", NULL);
@@ -244,6 +244,8 @@ void __init spear_setup_of_timer(void)
 		goto err_prepare_enable_clk;
 	}
 
+	of_node_put(np);
+
 	spear_clockevent_init(irq);
 	spear_clocksource_init();
 
@@ -253,4 +255,6 @@ void __init spear_setup_of_timer(void)
 	clk_put(gpt_clk);
 err_iomap:
 	iounmap(gpt_base);
+err_put_np:
+	of_node_put(np);
 }
-- 
2.35.1

[PATCH 4.9 13/30] wifi: mac80211: Fix UAF in ieee80211_scan_rx()

[Greg Kroah-Hartman]

From: Siddh Raman Pant <code@siddh.me>

[ Upstream commit 60deb9f10eec5c6a20252ed36238b55d8b614a2c ]

ieee80211_scan_rx() tries to access scan_req->flags after a
null check, but a UAF is observed when the scan is completed
and __ieee80211_scan_completed() executes, which then calls
cfg80211_scan_done() leading to the freeing of scan_req.

Since scan_req is rcu_dereference()'d, prevent the racing in
__ieee80211_scan_completed() by ensuring that from mac80211's
POV it is no longer accessed from an RCU read critical section
before we call cfg80211_scan_done().

Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d
Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/scan.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 701adcb9262e..a73c362a0182 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -385,10 +385,6 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 	scan_req = rcu_dereference_protected(local->scan_req,
 					     lockdep_is_held(&local->mtx));
 
-	if (scan_req != local->int_scan_req) {
-		local->scan_info.aborted = aborted;
-		cfg80211_scan_done(scan_req, &local->scan_info);
-	}
 	RCU_INIT_POINTER(local->scan_req, NULL);
 
 	scan_sdata = rcu_dereference_protected(local->scan_sdata,
@@ -398,6 +394,13 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 	local->scanning = 0;
 	local->scan_chandef.chan = NULL;
 
+	synchronize_rcu();
+
+	if (scan_req != local->int_scan_req) {
+		local->scan_info.aborted = aborted;
+		cfg80211_scan_done(scan_req, &local->scan_info);
+	}
+
 	/* Set power back to normal operating levels. */
 	ieee80211_hw_config(local, 0);
 
-- 
2.35.1

[PATCH 4.9 14/30] USB: core: Fix RST error in hub.c

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 766a96dc558385be735a370db867e302c8f22153 upstream.

A recent commit added an invalid RST expression to a kerneldoc comment
in hub.c.  The fix is trivial.

Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls")
Cc: <stable@vger.kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hub.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5702,7 +5702,7 @@ re_enumerate_no_bos:
  *
  * Return: The same as for usb_reset_and_verify_device().
  * However, if a reset is already in progress (for instance, if a
- * driver doesn't have pre_ or post_reset() callbacks, and while
+ * driver doesn't have pre_reset() or post_reset() callbacks, and while
  * being unbound or re-bound during the ongoing reset its disconnect()
  * or probe() routine tries to perform a second, nested reset), the
  * routine returns -EINPROGRESS.

[PATCH 4.9 15/30] ALSA: hda/tegra: set depop delay for tegra

[Greg Kroah-Hartman]

From: Mohan Kumar <mkumard@nvidia.com>

commit 3c4d8c24fb6c44f426e447b04800b0ed61a7b5ae upstream.

Reduce the suspend time by setting depop delay to 10ms for
tegra.

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913053641.23299-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_hdmi.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -3247,6 +3247,7 @@ static int patch_tegra_hdmi(struct hda_c
 	if (err)
 		return err;
 
+	codec->depop_delay = 10;
 	codec->patch_ops.build_pcms = tegra_hdmi_build_pcms;
 	spec = codec->spec;
 	spec->chmap.ops.chmap_cea_alloc_validate_get_type =

[PATCH 4.9 16/30] ALSA: hda: add Intel 5 Series / 3400 PCI DID

[Greg Kroah-Hartman]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

commit 4d40ceef4745536289012670103c59264e0fb3ec upstream.

Handle 0x3b57 variant with same AZX_DCAPS_INTEL_PCH_NOPM
capabilities as 0x3b56. In practise this allow use of HDMI/DP
display audio via i915.

BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/2751
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220912183716.2126312-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/hda_intel.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2316,6 +2316,8 @@ static const struct pci_device_id azx_id
 	/* 5 Series/3400 */
 	{ PCI_DEVICE(0x8086, 0x3b56),
 	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM },
+	{ PCI_DEVICE(0x8086, 0x3b57),
+	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM },
 	/* Poulsbo */
 	{ PCI_DEVICE(0x8086, 0x811b),
 	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE },

[PATCH 4.9 17/30] mm/slub: fix to return errno if kmalloc() fails

[Greg Kroah-Hartman]

From: Chao Yu <chao.yu@oppo.com>

commit 7e9c323c52b379d261a72dc7bd38120a761a93cd upstream.

In create_unique_id(), kmalloc(, GFP_KERNEL) can fail due to
out-of-memory, if it fails, return errno correctly rather than
triggering panic via BUG_ON();

kernel BUG at mm/slub.c:5893!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP

Call trace:
 sysfs_slab_add+0x258/0x260 mm/slub.c:5973
 __kmem_cache_create+0x60/0x118 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x19c/0x31c mm/slab_common.c:335
 kmem_cache_create+0x1c/0x28 mm/slab_common.c:390
 f2fs_kmem_cache_create fs/f2fs/f2fs.h:2766 [inline]
 f2fs_init_xattr_caches+0x78/0xb4 fs/f2fs/xattr.c:808
 f2fs_fill_super+0x1050/0x1e0c fs/f2fs/super.c:4149
 mount_bdev+0x1b8/0x210 fs/super.c:1400
 f2fs_mount+0x44/0x58 fs/f2fs/super.c:4512
 legacy_get_tree+0x30/0x74 fs/fs_context.c:610
 vfs_get_tree+0x40/0x140 fs/super.c:1530
 do_new_mount+0x1dc/0x4e4 fs/namespace.c:3040
 path_mount+0x358/0x914 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __arm64_sys_mount+0x2f8/0x408 fs/namespace.c:3568

Cc: <stable@kernel.org>
Fixes: 81819f0fc8285 ("SLUB core")
Reported-by: syzbot+81684812ea68216e08c5@syzkaller.appspotmail.com
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/slub.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/mm/slub.c
+++ b/mm/slub.c
@@ -5601,7 +5601,8 @@ static char *create_unique_id(struct kme
 	char *name = kmalloc(ID_STR_LENGTH, GFP_KERNEL);
 	char *p = name;
 
-	BUG_ON(!name);
+	if (!name)
+		return ERR_PTR(-ENOMEM);
 
 	*p++ = ':';
 	/*
@@ -5649,6 +5650,8 @@ static int sysfs_slab_add(struct kmem_ca
 		 * for the symlinks.
 		 */
 		name = create_unique_id(s);
+		if (IS_ERR(name))
+			return PTR_ERR(name);
 	}
 
 	s->kobj.kset = cache_kset(s);

[PATCH 4.9 18/30] netfilter: nf_conntrack_sip: fix ct_sip_walk_headers

[Greg Kroah-Hartman]

From: Igor Ryzhov <iryzhov@nfware.com>

[ Upstream commit 39aebedeaaa95757f5c1f2ddb5f43fdddbf478ca ]

ct_sip_next_header and ct_sip_get_header return an absolute
value of matchoff, not a shift from current dataoff.
So dataoff should be assigned matchoff, not incremented by it.

This issue can be seen in the scenario when there are multiple
Contact headers and the first one is using a hostname and other headers
use IP addresses. In this case, ct_sip_walk_headers will work as follows:

The first ct_sip_get_header call to will find the first Contact header
but will return -1 as the header uses a hostname. But matchoff will
be changed to the offset of this header. After that, dataoff should be
set to matchoff, so that the next ct_sip_get_header call find the next
Contact header. But instead of assigning dataoff to matchoff, it is
incremented by it, which is not correct, as matchoff is an absolute
value of the offset. So on the next call to the ct_sip_get_header,
dataoff will be incorrect, and the next Contact header may not be
found at all.

Fixes: 05e3ced297fe ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_sip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index 3a8dc39a9116..7dc23df7b4e3 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -471,7 +471,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr,
 				return ret;
 			if (ret == 0)
 				break;
-			dataoff += *matchoff;
+			dataoff = *matchoff;
 		}
 		*in_header = 0;
 	}
@@ -483,7 +483,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr,
 			break;
 		if (ret == 0)
 			return ret;
-		dataoff += *matchoff;
+		dataoff = *matchoff;
 	}
 
 	if (in_header)
-- 
2.35.1

[PATCH 4.9 19/30] netfilter: nf_conntrack_irc: Tighten matching on DCC message

[Greg Kroah-Hartman]

From: David Leadbeater <dgl@dgl.cx>

[ Upstream commit e8d5dfd1d8747b56077d02664a8838c71ced948e ]

CTCP messages should only be at the start of an IRC message, not
anywhere within it.

While the helper only decodes packes in the ORIGINAL direction, its
possible to make a client send a CTCP message back by empedding one into
a PING request.  As-is, thats enough to make the helper believe that it
saw a CTCP message.

Fixes: 869f37d8e48f ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_irc.c | 34 ++++++++++++++++++++++++++------
 1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c
index c6a8bdc3a226..5d630288f86c 100644
--- a/net/netfilter/nf_conntrack_irc.c
+++ b/net/netfilter/nf_conntrack_irc.c
@@ -150,15 +150,37 @@ static int help(struct sk_buff *skb, unsigned int protoff,
 	data = ib_ptr;
 	data_limit = ib_ptr + skb->len - dataoff;
 
-	/* strlen("\1DCC SENT t AAAAAAAA P\1\n")=24
-	 * 5+MINMATCHLEN+strlen("t AAAAAAAA P\1\n")=14 */
-	while (data < data_limit - (19 + MINMATCHLEN)) {
-		if (memcmp(data, "\1DCC ", 5)) {
+	/* Skip any whitespace */
+	while (data < data_limit - 10) {
+		if (*data == ' ' || *data == '\r' || *data == '\n')
+			data++;
+		else
+			break;
+	}
+
+	/* strlen("PRIVMSG x ")=10 */
+	if (data < data_limit - 10) {
+		if (strncasecmp("PRIVMSG ", data, 8))
+			goto out;
+		data += 8;
+	}
+
+	/* strlen(" :\1DCC SENT t AAAAAAAA P\1\n")=26
+	 * 7+MINMATCHLEN+strlen("t AAAAAAAA P\1\n")=26
+	 */
+	while (data < data_limit - (21 + MINMATCHLEN)) {
+		/* Find first " :", the start of message */
+		if (memcmp(data, " :", 2)) {
 			data++;
 			continue;
 		}
+		data += 2;
+
+		/* then check that place only for the DCC command */
+		if (memcmp(data, "\1DCC ", 5))
+			goto out;
 		data += 5;
-		/* we have at least (19+MINMATCHLEN)-5 bytes valid data left */
+		/* we have at least (21+MINMATCHLEN)-(2+5) bytes valid data left */
 
 		iph = ip_hdr(skb);
 		pr_debug("DCC found in master %pI4:%u %pI4:%u\n",
@@ -174,7 +196,7 @@ static int help(struct sk_buff *skb, unsigned int protoff,
 			pr_debug("DCC %s detected\n", dccprotos[i]);
 
 			/* we have at least
-			 * (19+MINMATCHLEN)-5-dccprotos[i].matchlen bytes valid
+			 * (21+MINMATCHLEN)-7-dccprotos[i].matchlen bytes valid
 			 * data left (== 14/13 bytes) */
 			if (parse_dcc(data, data_limit, &dcc_ip,
 				       &dcc_port, &addr_beg_p, &addr_end_p)) {
-- 
2.35.1

[PATCH 4.9 20/30] ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header

[Greg Kroah-Hartman]

From: Lu Wei <luwei32@huawei.com>

[ Upstream commit 81225b2ea161af48e093f58e8dfee6d705b16af4 ]

If an AF_PACKET socket is used to send packets through ipvlan and the
default xmit function of the AF_PACKET socket is changed from
dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option
name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and
remains as the initial value of 65535, this may trigger slab-out-of-bounds
bugs as following:

=================================================================
UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6
ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33
all Trace:
print_address_description.constprop.0+0x1d/0x160
print_report.cold+0x4f/0x112
kasan_report+0xa3/0x130
ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
ipvlan_start_xmit+0x29/0xa0 [ipvlan]
__dev_direct_xmit+0x2e2/0x380
packet_direct_xmit+0x22/0x60
packet_snd+0x7c9/0xc40
sock_sendmsg+0x9a/0xa0
__sys_sendto+0x18a/0x230
__x64_sys_sendto+0x74/0x90
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is:
  1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW
     and skb->protocol is not specified as in packet_parse_headers()

  2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit()

In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is
called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which
use "skb->head + skb->mac_header", out-of-bound access occurs.

This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2()
and reset mac header in multicast to solve this out-of-bound bug.

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ipvlan/ipvlan_core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c
index 6c0982a39486..7668584c3843 100644
--- a/drivers/net/ipvlan/ipvlan_core.c
+++ b/drivers/net/ipvlan/ipvlan_core.c
@@ -441,7 +441,6 @@ static int ipvlan_process_v6_outbound(struct sk_buff *skb)
 
 static int ipvlan_process_outbound(struct sk_buff *skb)
 {
-	struct ethhdr *ethh = eth_hdr(skb);
 	int ret = NET_XMIT_DROP;
 
 	/* The ipvlan is a pseudo-L2 device, so the packets that we receive
@@ -451,6 +450,8 @@ static int ipvlan_process_outbound(struct sk_buff *skb)
 	if (skb_mac_header_was_set(skb)) {
 		/* In this mode we dont care about
 		 * multicast and broadcast traffic */
+		struct ethhdr *ethh = eth_hdr(skb);
+
 		if (is_multicast_ether_addr(ethh->h_dest)) {
 			pr_debug_ratelimited(
 				"Dropped {multi|broad}cast of type=[%x]\n",
@@ -520,7 +521,7 @@ static int ipvlan_xmit_mode_l3(struct sk_buff *skb, struct net_device *dev)
 static int ipvlan_xmit_mode_l2(struct sk_buff *skb, struct net_device *dev)
 {
 	const struct ipvl_dev *ipvlan = netdev_priv(dev);
-	struct ethhdr *eth = eth_hdr(skb);
+	struct ethhdr *eth = skb_eth_hdr(skb);
 	struct ipvl_addr *addr;
 	void *lyr3h;
 	int addr_type;
@@ -544,6 +545,7 @@ static int ipvlan_xmit_mode_l2(struct sk_buff *skb, struct net_device *dev)
 		return dev_forward_skb(ipvlan->phy_dev, skb);
 
 	} else if (is_multicast_ether_addr(eth->h_dest)) {
+		skb_reset_mac_header(skb);
 		ipvlan_skb_crossing_ns(skb, NULL);
 		ipvlan_multicast_enqueue(ipvlan->port, skb);
 		return NET_XMIT_SUCCESS;
-- 
2.35.1

[PATCH 4.9 21/30] net: team: Unsync device addresses on ndo_stop

[Greg Kroah-Hartman]

From: Benjamin Poirier <bpoirier@nvidia.com>

[ Upstream commit bd60234222b2fd5573526da7bcd422801f271f5f ]

Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.

The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former team
ports after a team device has been deleted; see test_LAG_cleanup() in the
last patch in this series.

Add unsync calls at their expected location, team_close().

v3:
* When adding or deleting a port, only sync/unsync addresses if the team
  device is up. In other cases, it is taken care of at the right time by
  ndo_open/ndo_set_rx_mode/ndo_stop.

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/team/team.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 001dea7aaba3..657e12e0b5e2 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1280,10 +1280,12 @@ static int team_port_add(struct team *team, struct net_device *port_dev)
 		}
 	}
 
-	netif_addr_lock_bh(dev);
-	dev_uc_sync_multiple(port_dev, dev);
-	dev_mc_sync_multiple(port_dev, dev);
-	netif_addr_unlock_bh(dev);
+	if (dev->flags & IFF_UP) {
+		netif_addr_lock_bh(dev);
+		dev_uc_sync_multiple(port_dev, dev);
+		dev_mc_sync_multiple(port_dev, dev);
+		netif_addr_unlock_bh(dev);
+	}
 
 	port->index = -1;
 	list_add_tail_rcu(&port->list, &team->port_list);
@@ -1354,8 +1356,10 @@ static int team_port_del(struct team *team, struct net_device *port_dev)
 	netdev_rx_handler_unregister(port_dev);
 	team_port_disable_netpoll(port);
 	vlan_vids_del_by_dev(port_dev, dev);
-	dev_uc_unsync(port_dev, dev);
-	dev_mc_unsync(port_dev, dev);
+	if (dev->flags & IFF_UP) {
+		dev_uc_unsync(port_dev, dev);
+		dev_mc_unsync(port_dev, dev);
+	}
 	dev_close(port_dev);
 	team_port_leave(team, port);
 
@@ -1703,6 +1707,14 @@ static int team_open(struct net_device *dev)
 
 static int team_close(struct net_device *dev)
 {
+	struct team *team = netdev_priv(dev);
+	struct team_port *port;
+
+	list_for_each_entry(port, &team->port_list, list) {
+		dev_uc_unsync(port->dev, dev);
+		dev_mc_unsync(port->dev, dev);
+	}
+
 	return 0;
 }
 
-- 
2.35.1

[PATCH 4.9 22/30] MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 502550123bee6a2ffa438409b5b9aad4d6db3a8c ]

The lantiq WDT driver uses clk_get_io(), which is not exported,
so export it to fix a build error:

ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined!

Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lantiq/clk.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index d1de57b86683..e0835a743e41 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -52,6 +52,7 @@ struct clk *clk_get_io(void)
 {
 	return &cpu_clk_generic[2];
 }
+EXPORT_SYMBOL_GPL(clk_get_io);
 
 struct clk *clk_get_ppe(void)
 {
-- 
2.35.1

[PATCH 4.9 23/30] can: gs_usb: gs_can_open(): fix race dev->can.state condition

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

[ Upstream commit 5440428b3da65408dba0241985acb7a05258b85e ]

The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device
has been started. On busy networks the CAN controller might receive
CAN frame between and go into an error state before the dev->can.state
is assigned.

Assign dev->can.state before starting the controller to close the race
window.

Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20220920195216.232481-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/usb/gs_usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index e3dc59fffdb7..8472667ffe71 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -687,6 +687,7 @@ static int gs_can_open(struct net_device *netdev)
 		flags |= GS_CAN_MODE_TRIPLE_SAMPLE;
 
 	/* finally start device */
+	dev->can.state = CAN_STATE_ERROR_ACTIVE;
 	dm->mode = cpu_to_le32(GS_CAN_MODE_START);
 	dm->flags = cpu_to_le32(flags);
 	rc = usb_control_msg(interface_to_usbdev(dev->iface),
@@ -703,13 +704,12 @@ static int gs_can_open(struct net_device *netdev)
 	if (rc < 0) {
 		netdev_err(netdev, "Couldn't start device (err=%d)\n", rc);
 		kfree(dm);
+		dev->can.state = CAN_STATE_STOPPED;
 		return rc;
 	}
 
 	kfree(dm);
 
-	dev->can.state = CAN_STATE_ERROR_ACTIVE;
-
 	parent->active_channels++;
 	if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
 		netif_start_queue(netdev);
-- 
2.35.1

[PATCH 4.9 24/30] perf kcore_copy: Do not check /proc/modules is unchanged

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 5b427df27b94aec1312cace48a746782a0925c53 ]

/proc/kallsyms and /proc/modules are compared before and after the copy
in order to ensure no changes during the copy.

However /proc/modules also might change due to reference counts changing
even though that does not make any difference.

Any modules loaded or unloaded should be visible in changes to kallsyms,
so it is not necessary to check /proc/modules also anyway.

Remove the comparison checking that /proc/modules is unchanged.

Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache")
Reported-by: Daniel Dao <dqminh@cloudflare.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Daniel Dao <dqminh@cloudflare.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/symbol-elf.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index e155783c601a..0a7e1543ce8f 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -1694,8 +1694,8 @@ static int kcore_copy__compare_file(const char *from_dir, const char *to_dir,
  * unusual.  One significant peculiarity is that the mapping (start -> pgoff)
  * is not the same for the kernel map and the modules map.  That happens because
  * the data is copied adjacently whereas the original kcore has gaps.  Finally,
- * kallsyms and modules files are compared with their copies to check that
- * modules have not been loaded or unloaded while the copies were taking place.
+ * kallsyms file is compared with its copy to check that modules have not been
+ * loaded or unloaded while the copies were taking place.
  *
  * Return: %0 on success, %-1 on failure.
  */
@@ -1758,9 +1758,6 @@ int kcore_copy(const char *from_dir, const char *to_dir)
 					 kci.modules_map.len))
 		goto out_extract_close;
 
-	if (kcore_copy__compare_file(from_dir, to_dir, "modules"))
-		goto out_extract_close;
-
 	if (kcore_copy__compare_file(from_dir, to_dir, "kallsyms"))
 		goto out_extract_close;
 
-- 
2.35.1

[PATCH 4.9 25/30] net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD

[Greg Kroah-Hartman]

From: Sean Anderson <seanga2@gmail.com>

[ Upstream commit 878e2405710aacfeeb19364c300f38b7a9abfe8f ]

There is a separate receive path for small packets (under 256 bytes).
Instead of allocating a new dma-capable skb to be used for the next packet,
this path allocates a skb and copies the data into it (reusing the existing
sbk for the next packet). There are two bytes of junk data at the beginning
of every packet. I believe these are inserted in order to allow aligned DMA
and IP headers. We skip over them using skb_reserve. Before copying over
the data, we must use a barrier to ensure we see the whole packet. The
current code only synchronizes len bytes, starting from the beginning of
the packet, including the junk bytes. However, this leaves off the final
two bytes in the packet. Synchronize the whole packet.

To reproduce this problem, ping a HME with a payload size between 17 and
214

	$ ping -s 17 <hme_address>

which will complain rather loudly about the data mismatch. Small packets
(below 60 bytes on the wire) do not have this issue. I suspect this is
related to the padding added to increase the minimum packet size.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sun/sunhme.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index b38106a7cb5d..b421a1d44783 100644
--- a/drivers/net/ethernet/sun/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -2064,9 +2064,9 @@ static void happy_meal_rx(struct happy_meal *hp, struct net_device *dev)
 
 			skb_reserve(copy_skb, 2);
 			skb_put(copy_skb, len);
-			dma_sync_single_for_cpu(hp->dma_dev, dma_addr, len, DMA_FROM_DEVICE);
+			dma_sync_single_for_cpu(hp->dma_dev, dma_addr, len + 2, DMA_FROM_DEVICE);
 			skb_copy_from_linear_data(skb, copy_skb->data, len);
-			dma_sync_single_for_device(hp->dma_dev, dma_addr, len, DMA_FROM_DEVICE);
+			dma_sync_single_for_device(hp->dma_dev, dma_addr, len + 2, DMA_FROM_DEVICE);
 			/* Reuse original ring buffer. */
 			hme_write_rxd(hp, this,
 				      (RXFLAG_OWN|((RX_BUF_ALLOC_SIZE-RX_OFFSET)<<16)),
-- 
2.35.1

[PATCH 4.9 26/30] serial: Create uart_xmit_advance()

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

commit e77cab77f2cb3a1ca2ba8df4af45bb35617ac16d upstream.

A very common pattern in the drivers is to advance xmit tail
index and do bookkeeping of Tx'ed characters. Create
uart_xmit_advance() to handle it.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/serial_core.h |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -294,6 +294,23 @@ struct uart_state {
 /* number of characters left in xmit buffer before we ask for more */
 #define WAKEUP_CHARS		256
 
+/**
+ * uart_xmit_advance - Advance xmit buffer and account Tx'ed chars
+ * @up: uart_port structure describing the port
+ * @chars: number of characters sent
+ *
+ * This function advances the tail of circular xmit buffer by the number of
+ * @chars transmitted and handles accounting of transmitted bytes (into
+ * @up's icount.tx).
+ */
+static inline void uart_xmit_advance(struct uart_port *up, unsigned int chars)
+{
+	struct circ_buf *xmit = &up->state->xmit;
+
+	xmit->tail = (xmit->tail + chars) & (UART_XMIT_SIZE - 1);
+	up->icount.tx += chars;
+}
+
 struct module;
 struct tty_driver;
 

[PATCH 4.9 27/30] serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

commit 754f68044c7dd6c52534ba3e0f664830285c4b15 upstream.

DMA complete & stop paths did not correctly account Tx'ed characters
into icount.tx. Using uart_xmit_advance() fixes the problem.

Fixes: e9ea096dd225 ("serial: tegra: add serial driver")
Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance()
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/serial-tegra.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -409,7 +409,7 @@ static void tegra_uart_tx_dma_complete(v
 	count = tup->tx_bytes_requested - state.residue;
 	async_tx_ack(tup->tx_dma_desc);
 	spin_lock_irqsave(&tup->uport.lock, flags);
-	xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+	uart_xmit_advance(&tup->uport, count);
 	tup->tx_in_progress = 0;
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&tup->uport);
@@ -493,7 +493,6 @@ static unsigned int tegra_uart_tx_empty(
 static void tegra_uart_stop_tx(struct uart_port *u)
 {
 	struct tegra_uart_port *tup = to_tegra_uport(u);
-	struct circ_buf *xmit = &tup->uport.state->xmit;
 	struct dma_tx_state state;
 	unsigned int count;
 
@@ -504,7 +503,7 @@ static void tegra_uart_stop_tx(struct ua
 	dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
 	count = tup->tx_bytes_requested - state.residue;
 	async_tx_ack(tup->tx_dma_desc);
-	xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+	uart_xmit_advance(&tup->uport, count);
 	tup->tx_in_progress = 0;
 }
 

[PATCH 4.9 28/30] s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup

[Greg Kroah-Hartman]

From: Stefan Haberland <sth@linux.ibm.com>

commit db7ba07108a48c0f95b74fabbfd5d63e924f992d upstream.

Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup
pointer being NULL.

The pavgroup pointer is checked on the entrance of the function but
without the lcu->lock being held. Therefore there is a race window
between dasd_alias_get_start_dev() and _lcu_update() which sets
pavgroup to NULL with the lcu->lock held.

Fix by checking the pavgroup pointer with lcu->lock held.

Cc: <stable@vger.kernel.org> # 2.6.25+
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/block/dasd_alias.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -674,12 +674,12 @@ int dasd_alias_remove_device(struct dasd
 struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device)
 {
 	struct dasd_eckd_private *alias_priv, *private = base_device->private;
-	struct alias_pav_group *group = private->pavgroup;
 	struct alias_lcu *lcu = private->lcu;
 	struct dasd_device *alias_device;
+	struct alias_pav_group *group;
 	unsigned long flags;
 
-	if (!group || !lcu)
+	if (!lcu)
 		return NULL;
 	if (lcu->pav == NO_PAV ||
 	    lcu->flags & (NEED_UAC_UPDATE | UPDATE_PENDING))
@@ -696,6 +696,11 @@ struct dasd_device *dasd_alias_get_start
 	}
 
 	spin_lock_irqsave(&lcu->lock, flags);
+	group = private->pavgroup;
+	if (!group) {
+		spin_unlock_irqrestore(&lcu->lock, flags);
+		return NULL;
+	}
 	alias_device = group->next;
 	if (!alias_device) {
 		if (list_empty(&group->aliaslist)) {

[PATCH 4.9 29/30] Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region

[Greg Kroah-Hartman]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit f0880e2cb7e1f8039a048fdd01ce45ab77247221 ]

Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V
DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g.

$ cat /proc/iomem
...
f8000000-fffbffff : PCI Bus 0000:00
  f8000000-fbffffff : 0000:00:08.0
    f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
...
fe0000000-fffffffff : PCI Bus 0000:00
  fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
    fe0000000-fe07fffff : 2ba2:00:02.0
      fe0000000-fe07fffff : mlx4_core

the interesting part is the 'f8000000' region as it is actually the
VM's framebuffer:

$ lspci -v
...
0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller])
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
...

 hv_vmbus: registering driver hyperv_drm
 hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5
 hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console
 hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff]
 hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active?

Note: "Cannot request framebuffer" is not a fatal error in
hyperv_setup_gen1() as the code assumes there's some other framebuffer
device there but we actually have some other PCI device (mlx4 in this
case) config space there!

The problem appears to be that vmbus_allocate_mmio() can use dedicated
framebuffer region to serve any MMIO request from any device. The
semantics one might assume of a parameter named "fb_overlap_ok"
aren't implemented because !fb_overlap_ok essentially has no effect.
The existing semantics are really "prefer_fb_overlap". This patch
implements the expected and needed semantics, which is to not allocate
from the frame buffer space when !fb_overlap_ok.

Note, Gen2 VMs are usually unaffected by the issue because
framebuffer region is already taken by EFI fb (in case kernel supports
it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI
pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers
load after it. Devices can be brought up in any sequence so let's
resolve the issue by always ignoring 'fb_mmio' region for non-FB
requests, even if the region is unclaimed.

Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/vmbus_drv.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 3248aa7a35b3..cb3e22f10d68 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -1186,7 +1186,7 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj,
 			bool fb_overlap_ok)
 {
 	struct resource *iter, *shadow;
-	resource_size_t range_min, range_max, start;
+	resource_size_t range_min, range_max, start, end;
 	const char *dev_n = dev_name(&device_obj->device);
 	int retval;
 
@@ -1221,6 +1221,14 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj,
 		range_max = iter->end;
 		start = (range_min + align - 1) & ~(align - 1);
 		for (; start + size - 1 <= range_max; start += align) {
+			end = start + size - 1;
+
+			/* Skip the whole fb_mmio region if not fb_overlap_ok */
+			if (!fb_overlap_ok && fb_mmio &&
+			    (((start >= fb_mmio->start) && (start <= fb_mmio->end)) ||
+			     ((end >= fb_mmio->start) && (end <= fb_mmio->end))))
+				continue;
+
 			shadow = __request_region(iter, start, size, NULL,
 						  IORESOURCE_BUSY);
 			if (!shadow)
-- 
2.35.1

[PATCH 4.9 30/30] ext4: make directory inode spreading reflect flexbg size

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit 613c5a85898d1cd44e68f28d65eccf64a8ace9cf upstream.

Currently the Orlov inode allocator searches for free inodes for a
directory only in flex block groups with at most inodes_per_group/16
more directory inodes than average per flex block group. However with
growing size of flex block group this becomes unnecessarily strict.
Scale allowed difference from average directory count per flex block
group with flex block group size as we do with other metrics.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/ialloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -511,7 +511,7 @@ static int find_group_orlov(struct super
 		goto fallback;
 	}
 
-	max_dirs = ndirs / ngroups + inodes_per_group / 16;
+	max_dirs = ndirs / ngroups + inodes_per_group*flex_size / 16;
 	min_inodes = avefreei - inodes_per_group*flex_size / 4;
 	if (min_inodes < 1)
 		min_inodes = 1;

Re: [PATCH 4.9 04/30] video: fbdev: skeletonfb: Fix syntax errors in comments

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 992 bytes --]

On Mon 2022-09-26 12:11:35, Greg Kroah-Hartman wrote:
> From: Xiang wangx <wangxiang@cdjrlc.com>
> 
> [ Upstream commit fc378794a2f7a19cf26010dc33b89ba608d4c70f ]
> 
> Delete the redundant word 'its'.

This does not belong in stable.

Best regards,
							Pavel

> +++ b/drivers/video/fbdev/skeletonfb.c
> @@ -96,7 +96,7 @@ static struct fb_fix_screeninfo xxxfb_fix = {
>  
>      /*
>       * 	Modern graphical hardware not only supports pipelines but some 
> -     *  also support multiple monitors where each display can have its  
> +     *  also support multiple monitors where each display can have
>       *  its own unique data. In this case each display could be  
>       *  represented by a separate framebuffer device thus a separate 
>       *  struct fb_info. Now the struct xxx_par represents the graphics

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.9 07/30] video: fbdev: simplefb: Check before clk_put() not needed

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 882 bytes --]

Hi!

> From: Yihao Han <hanyihao@vivo.com>
> 
> [ Upstream commit 5491424d17bdeb7b7852a59367858251783f8398 ]
> 
> clk_put() already checks the clk ptr using !clk and IS_ERR()
> so there is no need to check it again before calling it.

This does not really fix any bug, so I'd preffer not to have it in
stable.

Best regards,
							Pavel

> +++ b/drivers/video/fbdev/simplefb.c
> @@ -231,8 +231,7 @@ static int simplefb_clocks_init(struct simplefb_par *par,
>  		if (IS_ERR(clock)) {
>  			if (PTR_ERR(clock) == -EPROBE_DEFER) {
>  				while (--i >= 0) {
> -					if (par->clks[i])
> -						clk_put(par->clks[i]);
> +					clk_put(par->clks[i]);
>  				}
>  				kfree(par->clks);
>  				return -EPROBE_DEFER;

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.9 03/30] drm/vc4: crtc: Use an union to store the page flip callback

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 2376 bytes --]

Hi!

> From: Maxime Ripard <maxime@cerno.tech>
> 
> [ Upstream commit 2523e9dcc3be91bf9fdc0d1e542557ca00bbef42 ]
> 
> We'll need to extend the vc4_async_flip_state structure to rely on
> another callback implementation, so let's move the current one into a
> union.

AFAICT this is preparation, not a bugfix; and I don't see patch this
prepares for queued. So we should not have this one, either.

Best regards,
								Pavel

> +++ b/drivers/gpu/drm/vc4/vc4_crtc.c
> @@ -717,17 +717,17 @@ struct vc4_async_flip_state {
>  	struct drm_framebuffer *fb;
>  	struct drm_pending_vblank_event *event;
>  
> -	struct vc4_seqno_cb cb;
> +	union {
> +		struct vc4_seqno_cb seqno;
> +	} cb;
>  };
>  
>  /* Called when the V3D execution for the BO being flipped to is done, so that
>   * we can actually update the plane's address to point to it.
>   */
>  static void
> -vc4_async_page_flip_complete(struct vc4_seqno_cb *cb)
> +vc4_async_page_flip_complete(struct vc4_async_flip_state *flip_state)
>  {
> -	struct vc4_async_flip_state *flip_state =
> -		container_of(cb, struct vc4_async_flip_state, cb);
>  	struct drm_crtc *crtc = flip_state->crtc;
>  	struct drm_device *dev = crtc->dev;
>  	struct vc4_dev *vc4 = to_vc4_dev(dev);
> @@ -749,6 +749,14 @@ vc4_async_page_flip_complete(struct vc4_seqno_cb *cb)
>  	up(&vc4->async_modeset);
>  }
>  
> +static void vc4_async_page_flip_seqno_complete(struct vc4_seqno_cb *cb)
> +{
> +	struct vc4_async_flip_state *flip_state =
> +		container_of(cb, struct vc4_async_flip_state, cb.seqno);
> +
> +	vc4_async_page_flip_complete(flip_state);
> +}
> +
>  /* Implements async (non-vblank-synced) page flips.
>   *
>   * The page flip ioctl needs to return immediately, so we grab the
> @@ -794,8 +802,8 @@ static int vc4_async_page_flip(struct drm_crtc *crtc,
>  	drm_atomic_set_fb_for_plane(plane->state, fb);
>  	plane->fb = fb;
>  
> -	vc4_queue_seqno_cb(dev, &flip_state->cb, bo->seqno,
> -			   vc4_async_page_flip_complete);
> +	vc4_queue_seqno_cb(dev, &flip_state->cb.seqno, bo->seqno,
> +			   vc4_async_page_flip_seqno_complete);
>  
>  	/* Driver takes ownership of state on successful async commit. */
>  	return 0;

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.9 10/30] mips/pic32/pic32mzda: Fix refcount leak bugs

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1148 bytes --]

Hi!

> [ Upstream commit eb9e9bc4fa5fb489c92ec588b3fb35f042ba6d86 ]
> 
> of_find_matching_node(), of_find_compatible_node() and
> of_find_node_by_path() will return node pointers with refcout
> incremented. We should call of_node_put() when they are not
> used anymore.

True. But we absolutely should not call put when we still use the
reference.

> +++ b/arch/mips/pic32/pic32mzda/init.c
> @@ -131,13 +131,18 @@ static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup)
>  		np = of_find_compatible_node(NULL, NULL, lookup->compatible);
>  		if (np) {
>  			lookup->name = (char *)np->name;
> -			if (lookup->phys_addr)
> +			if (lookup->phys_addr) {
> +				of_node_put(np);
>  				continue;
> +			}
>  			if (!of_address_to_resource(np, 0, &res))
>  				lookup->phys_addr = res.start;
> +			of_node_put(np);
>  		}
>  	}

As we stored np->name in lookup, we should not be putting that node,
we are still using it.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.9 00/30] 4.9.330-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 743 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.9.330 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.9.y

Bunch of issues were detected during review, I sent those in separate
emails.

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.9 04/30] video: fbdev: skeletonfb: Fix syntax errors in comments

[Bagas Sanjaya]

On 9/26/22 17:28, Pavel Machek wrote:
> On Mon 2022-09-26 12:11:35, Greg Kroah-Hartman wrote:
>> From: Xiang wangx <wangxiang@cdjrlc.com>
>>
>> [ Upstream commit fc378794a2f7a19cf26010dc33b89ba608d4c70f ]
>>
>> Delete the redundant word 'its'.
> 
> This does not belong in stable.
> 

Without seeing the upstream commit, the patch subject is misleading:
the patch doesn't fix any syntax errors as one might get from the
compiler.

Also, what I find irritating is that I have never seen reply from
@cdjrlc.com people to review comments pointing flaws of their patch.
I guess they don't have any other jobs here in LKML other than just
throwing one-line redundant word stripping patches. The similar cause
is why Jani Nikula [1] and Greg NAKed cgel.zte patches (ignoring
reviews and "atypical" corporate email structure [2])

Hence NAK (agree with your verdict). However, should the upstream
commit be reverted?

[1]: https://lore.kernel.org/lkml/878rn1dd8l.fsf@intel.com/
[2]: https://lore.kernel.org/lkml/Yylv5hbSBejJ58nt@kroah.com/

-- 
An old man doll... just what I always wanted! - Clara

Re: [PATCH 4.9 04/30] video: fbdev: skeletonfb: Fix syntax errors in comments

[Greg Kroah-Hartman]

On Mon, Sep 26, 2022 at 12:28:01PM +0200, Pavel Machek wrote:
> On Mon 2022-09-26 12:11:35, Greg Kroah-Hartman wrote:
> > From: Xiang wangx <wangxiang@cdjrlc.com>
> > 
> > [ Upstream commit fc378794a2f7a19cf26010dc33b89ba608d4c70f ]
> > 
> > Delete the redundant word 'its'.
> 
> This does not belong in stable.

Agreed, I thought I caught this before.  Now dropped.

greg k-h

Re: [PATCH 4.9 10/30] mips/pic32/pic32mzda: Fix refcount leak bugs

[Greg Kroah-Hartman]

On Mon, Sep 26, 2022 at 12:40:42PM +0200, Pavel Machek wrote:
> Hi!
> 
> > [ Upstream commit eb9e9bc4fa5fb489c92ec588b3fb35f042ba6d86 ]
> > 
> > of_find_matching_node(), of_find_compatible_node() and
> > of_find_node_by_path() will return node pointers with refcout
> > incremented. We should call of_node_put() when they are not
> > used anymore.
> 
> True. But we absolutely should not call put when we still use the
> reference.
> 
> > +++ b/arch/mips/pic32/pic32mzda/init.c
> > @@ -131,13 +131,18 @@ static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup)
> >  		np = of_find_compatible_node(NULL, NULL, lookup->compatible);
> >  		if (np) {
> >  			lookup->name = (char *)np->name;
> > -			if (lookup->phys_addr)
> > +			if (lookup->phys_addr) {
> > +				of_node_put(np);
> >  				continue;
> > +			}
> >  			if (!of_address_to_resource(np, 0, &res))
> >  				lookup->phys_addr = res.start;
> > +			of_node_put(np);
> >  		}
> >  	}
> 
> As we stored np->name in lookup, we should not be putting that node,
> we are still using it.

Now dropped, thanks.

greg k-h

Re: [PATCH 4.9 07/30] video: fbdev: simplefb: Check before clk_put() not needed

[Greg Kroah-Hartman]

On Mon, Sep 26, 2022 at 12:29:26PM +0200, Pavel Machek wrote:
> Hi!
> 
> > From: Yihao Han <hanyihao@vivo.com>
> > 
> > [ Upstream commit 5491424d17bdeb7b7852a59367858251783f8398 ]
> > 
> > clk_put() already checks the clk ptr using !clk and IS_ERR()
> > so there is no need to check it again before calling it.
> 
> This does not really fix any bug, so I'd preffer not to have it in
> stable.
> 

Now dropped, thanks.

greg k-h

Re: [PATCH 4.9 03/30] drm/vc4: crtc: Use an union to store the page flip callback

[Greg Kroah-Hartman]

On Mon, Sep 26, 2022 at 12:38:00PM +0200, Pavel Machek wrote:
> Hi!
> 
> > From: Maxime Ripard <maxime@cerno.tech>
> > 
> > [ Upstream commit 2523e9dcc3be91bf9fdc0d1e542557ca00bbef42 ]
> > 
> > We'll need to extend the vc4_async_flip_state structure to rely on
> > another callback implementation, so let's move the current one into a
> > union.
> 
> AFAICT this is preparation, not a bugfix; and I don't see patch this
> prepares for queued. So we should not have this one, either.

Dropped.

For some reason we had a bunch of 4.9-only patches that were not in any
other stable tree, so they shouldn't have only gone to 4.9.  I'll review
them all again and then push out a -rc2.

thanks,

greg k-h

Re: [PATCH 4.9 00/30] 4.9.330-rc1 review

[Shuah Khan]

On 9/26/22 04:11, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.330 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 28 Sep 2022 10:07:26 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.330-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah