From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932267AbdBNREI (ORCPT ); Tue, 14 Feb 2017 12:04:08 -0500 Received: from mail.free-electrons.com ([62.4.15.54]:52441 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754756AbdBNRCR (ORCPT ); Tue, 14 Feb 2017 12:02:17 -0500 From: Gregory CLEMENT To: Ulf Hansson , Adrian Hunter , linux-mmc@vger.kernel.org Cc: Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Gregory CLEMENT , Thomas Petazzoni , linux-arm-kernel@lists.infradead.org, Mike Turquette , Stephen Boyd , linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring , devicetree@vger.kernel.org, Ziji Hu , Jimmy Xu , Jisheng Zhang , Nadav Haklai , Ryan Gao , Doug Jones , Victor Gu , "Wei(SOCP) Liu" , Wilson Ding , Yehuda Yitschak , Marcin Wojtas , Hanna Hawa , Kostya Porotchkin Subject: [PATCH v6 08/14] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality Date: Tue, 14 Feb 2017 18:01:48 +0100 Message-Id: X-Mailer: git-send-email 2.11.0 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Hu Ziji Add Xenon eMMC/SD/SDIO host controller core functionality. Add Xenon specific initialization process. Add Xenon specific mmc_host_ops APIs. Add Xenon specific register definitions. Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig. Marvell Xenon SDHC conforms to SD Physical Layer Specification Version 3.01 and is designed according to the guidelines provided in the SD Host Controller Standard Specification Version 3.00. Signed-off-by: Hu Ziji Signed-off-by: Gregory CLEMENT --- drivers/mmc/host/Kconfig | 9 +- drivers/mmc/host/Makefile | 3 +- drivers/mmc/host/sdhci-xenon.c | 602 ++++++++++++++++++++++++++++++++++- drivers/mmc/host/sdhci-xenon.h | 70 ++++- 4 files changed, 684 insertions(+) create mode 100644 drivers/mmc/host/sdhci-xenon.c create mode 100644 drivers/mmc/host/sdhci-xenon.h diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 2eb97014dc3f..1c1a88bfbdad 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -819,3 +819,12 @@ config MMC_SDHCI_BRCMSTB Broadcom STB SoCs. If unsure, say Y. + +config MMC_SDHCI_XENON + tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver" + depends on MMC_SDHCI_PLTFM + help + This selects Marvell Xenon eMMC/SD/SDIO SDHCI. + If you have a machine with integrated Marvell Xenon SDHC IP, + say Y or M here. + If unsure, say N. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index ccc9c4cba154..b0a2ab4b256e 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -82,3 +82,6 @@ obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG endif + +obj-$(CONFIG_MMC_SDHCI_XENON) += sdhci-xenon-driver.o +sdhci-xenon-driver-y += sdhci-xenon.o diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c new file mode 100644 index 000000000000..e633f803907a --- /dev/null +++ b/drivers/mmc/host/sdhci-xenon.c @@ -0,0 +1,602 @@ +/* + * Driver for Marvell Xenon SDHC as a platform device + * + * Copyright (C) 2016 Marvell, All Rights Reserved. + * + * Author: Hu Ziji + * Date: 2016-8-24 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * Inspired by Jisheng Zhang + * Special thanks to Video BG4 project team. + */ + +#include +#include +#include + +#include "sdhci-pltfm.h" +#include "sdhci-xenon.h" + +static int enable_xenon_internal_clk(struct sdhci_host *host) +{ + u32 reg; + u8 timeout; + + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL); + reg |= SDHCI_CLOCK_INT_EN; + sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL); + /* Wait max 20 ms */ + timeout = 20; + while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) + & SDHCI_CLOCK_INT_STABLE)) { + if (timeout == 0) { + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + return -ETIMEDOUT; + } + timeout--; + mdelay(1); + } + + return 0; +} + +/* Set SDCLK-off-while-idle */ +static void xenon_set_sdclk_off_idle(struct sdhci_host *host, + unsigned char sdhc_id, bool enable) +{ + u32 reg; + u32 mask; + + reg = sdhci_readl(host, XENON_SYS_OP_CTRL); + /* Get the bit shift basing on the SDHC index */ + mask = (0x1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id)); + if (enable) + reg |= mask; + else + reg &= ~mask; + + sdhci_writel(host, reg, XENON_SYS_OP_CTRL); +} + +/* Enable/Disable the Auto Clock Gating function */ +static void xenon_set_acg(struct sdhci_host *host, bool enable) +{ + u32 reg; + + reg = sdhci_readl(host, XENON_SYS_OP_CTRL); + if (enable) + reg &= ~XENON_AUTO_CLKGATE_DISABLE_MASK; + else + reg |= XENON_AUTO_CLKGATE_DISABLE_MASK; + sdhci_writel(host, reg, XENON_SYS_OP_CTRL); +} + +/* Enable this SDHC */ +static void xenon_enable_sdhc(struct sdhci_host *host, + unsigned char sdhc_id) +{ + u32 reg; + + reg = sdhci_readl(host, XENON_SYS_OP_CTRL); + reg |= (BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT); + sdhci_writel(host, reg, XENON_SYS_OP_CTRL); + + /* + * Manually set the flag which all the card types require, + * including SD, eMMC, SDIO + */ + host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; +} + +/* Disable this SDHC */ +static void xenon_disable_sdhc(struct sdhci_host *host, + unsigned char sdhc_id) +{ + u32 reg; + + reg = sdhci_readl(host, XENON_SYS_OP_CTRL); + reg &= ~(BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT); + sdhci_writel(host, reg, XENON_SYS_OP_CTRL); +} + +/* Enable Parallel Transfer Mode */ +static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host, + unsigned char sdhc_id) +{ + u32 reg; + + reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL); + reg |= BIT(sdhc_id); + sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL); +} + +/* Mask command conflict error */ +static void xenon_mask_cmd_conflict_err(struct sdhci_host *host) +{ + u32 reg; + + reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL); + reg |= XENON_MASK_CMD_CONFLICT_ERR; + sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL); +} + +static void xenon_sdhc_retune_setup(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + u32 reg; + + /* Disable the Re-Tuning Request functionality */ + reg = sdhci_readl(host, XENON_SLOT_RETUNING_REQ_CTRL); + reg &= ~XENON_RETUNING_COMPATIBLE; + sdhci_writel(host, reg, XENON_SLOT_RETUNING_REQ_CTRL); + + /* Disable the Re-tuning Interrupt */ + reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE); + reg &= ~SDHCI_INT_RETUNE; + sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE); + reg = sdhci_readl(host, SDHCI_INT_ENABLE); + reg &= ~SDHCI_INT_RETUNE; + sdhci_writel(host, reg, SDHCI_INT_ENABLE); + + /* Force to use Tuning Mode 1 */ + host->tuning_mode = SDHCI_TUNING_MODE_1; + /* Set re-tuning period */ + host->tuning_count = 1 << (priv->tuning_count - 1); +} + +/* + * Operations inside struct sdhci_ops + */ +/* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */ +static void sdhci_xenon_reset_exit(struct sdhci_host *host, + unsigned char sdhc_id, u8 mask) +{ + /* Only SOFTWARE RESET ALL will clear the register setting */ + if (!(mask & SDHCI_RESET_ALL)) + return; + + /* Disable tuning request and auto-retuning again */ + xenon_sdhc_retune_setup(host); + + xenon_set_acg(host, true); + + xenon_set_sdclk_off_idle(host, sdhc_id, false); + + xenon_mask_cmd_conflict_err(host); +} + +static void sdhci_xenon_reset(struct sdhci_host *host, u8 mask) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + + sdhci_reset(host, mask); + sdhci_xenon_reset_exit(host, priv->sdhc_id, mask); +} + +/* + * Xenon defines different values for HS200 and HS400 + * in Host_Control_2 + */ +static void xenon_set_uhs_signaling(struct sdhci_host *host, + unsigned int timing) +{ + u16 ctrl_2; + + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + if (timing == MMC_TIMING_MMC_HS200) + ctrl_2 |= XENON_CTRL_HS200; + else if (timing == MMC_TIMING_UHS_SDR104) + ctrl_2 |= SDHCI_CTRL_UHS_SDR104; + else if (timing == MMC_TIMING_UHS_SDR12) + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + else if (timing == MMC_TIMING_UHS_SDR25) + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + else if (timing == MMC_TIMING_UHS_SDR50) + ctrl_2 |= SDHCI_CTRL_UHS_SDR50; + else if ((timing == MMC_TIMING_UHS_DDR50) || + (timing == MMC_TIMING_MMC_DDR52)) + ctrl_2 |= SDHCI_CTRL_UHS_DDR50; + else if (timing == MMC_TIMING_MMC_HS400) + ctrl_2 |= XENON_CTRL_HS400; + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} + +static const struct sdhci_ops sdhci_xenon_ops = { + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_xenon_reset, + .set_uhs_signaling = xenon_set_uhs_signaling, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, +}; + +static const struct sdhci_pltfm_data sdhci_xenon_pdata = { + .ops = &sdhci_xenon_ops, + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | + SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, +}; + +/* + * Xenon Specific Operations in mmc_host_ops + */ +static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + unsigned long flags; + u32 reg; + + /* + * HS400/HS200/eMMC HS doesn't have Preset Value register. + * However, sdhci_set_ios will read HS400/HS200 Preset register. + * Disable Preset Value register for HS400/HS200. + * eMMC HS with preset_enabled set will trigger a bug in + * get_preset_value(). + */ + spin_lock_irqsave(&host->lock, flags); + if ((ios->timing == MMC_TIMING_MMC_HS400) || + (ios->timing == MMC_TIMING_MMC_HS200) || + (ios->timing == MMC_TIMING_MMC_HS)) { + host->preset_enabled = false; + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + host->flags &= ~SDHCI_PV_ENABLED; + + reg = sdhci_readw(host, SDHCI_HOST_CONTROL2); + reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; + sdhci_writew(host, reg, SDHCI_HOST_CONTROL2); + } else { + host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + } + spin_unlock_irqrestore(&host->lock, flags); + + sdhci_set_ios(mmc, ios); + + if (host->clock > XENON_DEFAULT_SDCLK_FREQ) { + spin_lock_irqsave(&host->lock, flags); + xenon_set_sdclk_off_idle(host, priv->sdhc_id, true); + spin_unlock_irqrestore(&host->lock, flags); + } +} + +static int xenon_emmc_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + unsigned char voltage = ios->signal_voltage; + struct sdhci_host *host = mmc_priv(mmc); + unsigned char voltage_code; + u32 ctrl; + + if ((voltage == MMC_SIGNAL_VOLTAGE_330) || + (voltage == MMC_SIGNAL_VOLTAGE_180)) { + if (voltage == MMC_SIGNAL_VOLTAGE_330) + voltage_code = XENON_EMMC_VCCQ_3_3V; + else if (voltage == MMC_SIGNAL_VOLTAGE_180) + voltage_code = XENON_EMMC_VCCQ_1_8V; + + /* + * This host is for eMMC, XENON self-defined + * eMMC control register should be accessed + * instead of Host Control 2 + */ + ctrl = sdhci_readl(host, XENON_SLOT_EMMC_CTRL); + ctrl &= ~XENON_EMMC_VCCQ_MASK; + ctrl |= voltage_code; + sdhci_writel(host, ctrl, XENON_SLOT_EMMC_CTRL); + + /* There is no standard to determine this waiting period */ + usleep_range(1000, 2000); + + /* Check whether io voltage switch is done */ + ctrl = sdhci_readl(host, XENON_SLOT_EMMC_CTRL); + ctrl &= XENON_EMMC_VCCQ_MASK; + /* + * This bit is set only when regulator feeds back + * the voltage switch results to Xenon SDHC. + * However, in actaul implementation, regulator might not + * provide this feedback. + * Thus we shall not rely on this bit to determine + * if switch failed. + * If the bit is not set, just throw a message. + * Besides, error code should not be returned. + */ + if (ctrl != voltage_code) + dev_info(mmc_dev(mmc), "fail to detect eMMC signal voltage stable\n"); + return 0; + } + + dev_err(mmc_dev(mmc), "Unsupported signal voltage: %d\n", voltage); + return -EINVAL; +} + +static int xenon_start_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + + /* + * Before SD/SDIO set signal voltage, SD bus clock should be + * disabled. However, sdhci_set_clock will also disable the Internal + * clock in mmc_set_signal_voltage(). + * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated. + * Thus here manually enable internal clock. + * + * After switch completes, it is unnecessary to disable internal clock, + * since keeping internal clock active obeys SD spec. + */ + enable_xenon_internal_clk(host); + + if (priv->init_card_type == MMC_TYPE_MMC) + return xenon_emmc_signal_voltage_switch(mmc, ios); + + return sdhci_start_signal_voltage_switch(mmc, ios); +} + +/* + * Update card type. + * priv->init_card_type will be used in PHY timing adjustment. + */ +static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + + /* Update card type*/ + priv->init_card_type = card->type; +} + +static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + + if (host->timing == MMC_TIMING_UHS_DDR50) + return 0; + + /* + * Currently force Xenon driver back to support mode 1 only, + * even though Xenon might claim to support mode 2 or mode 3. + * It requires more time to test mode 2/mode 3 on more platforms. + */ + if (host->tuning_mode != SDHCI_TUNING_MODE_1) + xenon_sdhc_retune_setup(host); + + return sdhci_execute_tuning(mmc, opcode); +} + +static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + u32 reg; + u8 sdhc_id = priv->sdhc_id; + + sdhci_enable_sdio_irq(mmc, enable); + + if (enable) { + /* + * Set SDIO Card Inserted indication + * to enable detecting SDIO async irq. + */ + reg = sdhci_readl(host, XENON_SYS_CFG_INFO); + reg |= (1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT)); + sdhci_writel(host, reg, XENON_SYS_CFG_INFO); + } else { + /* Clear SDIO Card Inserted indication */ + reg = sdhci_readl(host, XENON_SYS_CFG_INFO); + reg &= ~(1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT)); + sdhci_writel(host, reg, XENON_SYS_CFG_INFO); + } +} + +static void xenon_replace_mmc_host_ops(struct sdhci_host *host) +{ + host->mmc_host_ops.set_ios = xenon_set_ios; + host->mmc_host_ops.start_signal_voltage_switch = + xenon_start_signal_voltage_switch; + host->mmc_host_ops.init_card = xenon_init_card; + host->mmc_host_ops.execute_tuning = xenon_execute_tuning; + host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq; +} + +/* + * Parse Xenon specific DT properties: + * init_card_type: check whether this SDHC is for eMMC + * sdhc-id: the index of current SDHC. + * Refer to XENON_SYS_CFG_INFO register + * tun-count: the interval between re-tuning + */ +static int xenon_probe_dt(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct sdhci_host *host = platform_get_drvdata(pdev); + struct mmc_host *mmc = host->mmc; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + u32 sdhc_id, nr_sdhc; + u32 tuning_count; + + /* Disable HS200 on Armada AP806 */ + if (of_device_is_compatible(np, "marvell,armada-ap806-sdhci")) + host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200; + + priv->init_card_type = XENON_CARD_TYPE_UNKNOWN; + /* Check if mmc-card sub-node exists */ + if (mmc_of_parse_mmc_card(mmc)) { + priv->init_card_type = MMC_TYPE_MMC; + /* + * Force to clear BUS_TEST to + * skip bus_test_pre and bus_test_post + */ + mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST; + } + + priv->sdhc_id = 0x0; + if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) { + nr_sdhc = sdhci_readl(host, XENON_SYS_CFG_INFO); + nr_sdhc &= XENON_NR_SUPPORTED_SLOT_MASK; + if (unlikely(sdhc_id > nr_sdhc)) { + dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of SDHCs %d\n", + sdhc_id, nr_sdhc); + return -EINVAL; + } + } + + tuning_count = XENON_DEF_TUNING_COUNT; + if (!of_property_read_u32(np, "marvell,xenon-tun-count", + &tuning_count)) { + if (unlikely(tuning_count >= XENON_TMR_RETUN_NO_PRESENT)) { + dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n", + XENON_DEF_TUNING_COUNT); + tuning_count = XENON_DEF_TUNING_COUNT; + } + } + priv->tuning_count = tuning_count; + + return 0; +} + +static int xenon_sdhc_probe(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + u8 sdhc_id = priv->sdhc_id; + + /* Enable SDHC */ + xenon_enable_sdhc(host, sdhc_id); + + /* Enable ACG */ + xenon_set_acg(host, true); + + /* Enable Parallel Transfer Mode */ + xenon_enable_sdhc_parallel_tran(host, sdhc_id); + + xenon_mask_cmd_conflict_err(host); + + return 0; +} + +static void xenon_sdhc_remove(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + u8 sdhc_id = priv->sdhc_id; + + /* disable SDHC */ + xenon_disable_sdhc(host, sdhc_id); +} + +static int sdhci_xenon_probe(struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_host *host; + struct sdhci_xenon_priv *priv; + int err; + + host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata, + sizeof(struct sdhci_xenon_priv)); + if (IS_ERR(host)) + return PTR_ERR(host); + + pltfm_host = sdhci_priv(host); + priv = sdhci_pltfm_priv(pltfm_host); + + xenon_set_acg(host, false); + + /* + * Link Xenon specific mmc_host_ops function, + * to replace standard ones in sdhci_ops. + */ + xenon_replace_mmc_host_ops(host); + + pltfm_host->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(pltfm_host->clk)) { + err = PTR_ERR(pltfm_host->clk); + dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err); + goto free_pltfm; + } + err = clk_prepare_enable(pltfm_host->clk); + if (err) + goto free_pltfm; + + err = mmc_of_parse(host->mmc); + if (err) + goto err_clk; + + sdhci_get_of_property(pdev); + + /* Xenon specific dt parse */ + err = xenon_probe_dt(pdev); + if (err) + goto err_clk; + + err = xenon_sdhc_probe(host); + if (err) + goto err_clk; + + err = sdhci_add_host(host); + if (err) + goto remove_sdhc; + + return 0; + +remove_sdhc: + xenon_sdhc_remove(host); +err_clk: + clk_disable_unprepare(pltfm_host->clk); +free_pltfm: + sdhci_pltfm_free(pdev); + return err; +} + +static int sdhci_xenon_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + xenon_sdhc_remove(host); + + sdhci_remove_host(host, 0); + + clk_disable_unprepare(pltfm_host->clk); + + sdhci_pltfm_free(pdev); + + return 0; +} + +static const struct of_device_id sdhci_xenon_dt_ids[] = { + { .compatible = "marvell,armada-ap806-sdhci",}, + { .compatible = "marvell,armada-cp110-sdhci",}, + { .compatible = "marvell,armada-3700-sdhci",}, + {} +}; +MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids); + +static struct platform_driver sdhci_xenon_driver = { + .driver = { + .name = "xenon-sdhci", + .of_match_table = sdhci_xenon_dt_ids, + .pm = &sdhci_pltfm_pmops, + }, + .probe = sdhci_xenon_probe, + .remove = sdhci_xenon_remove, +}; + +module_platform_driver(sdhci_xenon_driver); + +MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC"); +MODULE_AUTHOR("Hu Ziji "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h new file mode 100644 index 000000000000..69de711db9eb --- /dev/null +++ b/drivers/mmc/host/sdhci-xenon.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2016 Marvell, All Rights Reserved. + * + * Author: Hu Ziji + * Date: 2016-8-24 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + */ +#ifndef SDHCI_XENON_H_ +#define SDHCI_XENON_H_ + +/* Register Offset of Xenon SDHC self-defined register */ +#define XENON_SYS_CFG_INFO 0x0104 +#define XENON_SLOT_TYPE_SDIO_SHIFT 24 +#define XENON_NR_SUPPORTED_SLOT_MASK 0x7 + +#define XENON_SYS_OP_CTRL 0x0108 +#define XENON_AUTO_CLKGATE_DISABLE_MASK BIT(20) +#define XENON_SDCLK_IDLEOFF_ENABLE_SHIFT 8 +#define XENON_SLOT_ENABLE_SHIFT 0 + +#define XENON_SYS_EXT_OP_CTRL 0x010C +#define XENON_MASK_CMD_CONFLICT_ERR BIT(8) + +#define XENON_SLOT_EMMC_CTRL 0x0130 +#define XENON_EMMC_VCCQ_MASK 0x3 +#define XENON_EMMC_VCCQ_1_8V 0x1 +#define XENON_EMMC_VCCQ_3_3V 0x3 + +#define XENON_SLOT_RETUNING_REQ_CTRL 0x0144 +/* retuning compatible */ +#define XENON_RETUNING_COMPATIBLE 0x1 + +/* Tuning Parameter */ +#define XENON_TMR_RETUN_NO_PRESENT 0xF +#define XENON_DEF_TUNING_COUNT 0x9 + +#define XENON_DEFAULT_SDCLK_FREQ 400000 + +/* Xenon specific Mode Select value */ +#define XENON_CTRL_HS200 0x5 +#define XENON_CTRL_HS400 0x6 + +/* Indicate Card Type is not clear yet */ +#define XENON_CARD_TYPE_UNKNOWN 0xF + +struct sdhci_xenon_priv { + unsigned char tuning_count; + /* idx of SDHC */ + u8 sdhc_id; + + /* + * eMMC/SD/SDIO require different PHY settings or + * voltage control. It's necessary for Xenon driver to + * recognize card type during, or even before initialization. + * However, mmc_host->card is not available yet at that time. + * This field records the card type during init. + * For eMMC, it is updated in dt parse. For SD/SDIO, it is + * updated in xenon_init_card(). + * + * It is only valid during initialization after it is updated. + * Do not access this variable in normal transfers after + * initialization completes. + */ + unsigned int init_card_type; +}; + +#endif -- git-series 0.9.1