From: Helen Koike <helen.koike@collabora.com>
To: "Nícolas F. R. A. Prado" <nfraprado@protonmail.com>,
linux-media@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Hans Verkuil <hverkuil@xs4all.nl>,
linux-kernel@vger.kernel.org, lkcamp@lists.libreplanetbr.org
Subject: Re: [PATCH 3/3] media: vimc: deb: Add support for GBR and BGR bus formats on source pad
Date: Wed, 5 Feb 2020 11:17:39 -0300 [thread overview]
Message-ID: <cc1e3f33-450b-2501-3b45-fddace4edcb8@collabora.com> (raw)
In-Reply-To: <20200202155019.1029993-4-nfraprado@protonmail.com>
Hi Nicolas,
Thanks for the patch.
On 2/2/20 1:50 PM, Nícolas F. R. A. Prado wrote:
> Add support for GBR and BGR media bus formats for the source pad of
> debayer subdevices.
>
> Co-developed-by: Vitor Massaru Iha <vitor@massaru.org>
> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
> ---
> drivers/media/platform/vimc/vimc-debayer.c | 53 +++++++++++++++++-----
> 1 file changed, 41 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c
> index 5d1b67d684bb..463cafbe107e 100644
> --- a/drivers/media/platform/vimc/vimc-debayer.c
> +++ b/drivers/media/platform/vimc/vimc-debayer.c
> @@ -51,6 +51,11 @@ static const struct v4l2_mbus_framefmt sink_fmt_default = {
> .colorspace = V4L2_COLORSPACE_DEFAULT,
> };
>
> +static const u32 src_rgb_codes[] = {
s/src_rgb_codes/vimc_deb_src_mbus_codes
> + MEDIA_BUS_FMT_BGR888_1X24,
> + MEDIA_BUS_FMT_RGB888_1X24,
> + MEDIA_BUS_FMT_GBR888_1X24};
The closing bracket should be in the next line.
I was also wondering if all the MEDIA_BUS_FMT_BGR888_* MEDIA_BUS_FMT_RGB888_*
MEDIA_BUS_FMT_GBR888_* variants could be added here as well.
> +
> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = {
> {
> .code = MEDIA_BUS_FMT_SBGGR8_1X8,
> @@ -148,14 +153,11 @@ static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_mbus_code_enum *code)
> {
> - /* We only support one format for source pads */
> if (VIMC_IS_SRC(code->pad)) {
> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
> -
> - if (code->index)
> + if (code->index >= ARRAY_SIZE(src_rgb_codes))
> return -EINVAL;
>
> - code->code = vdeb->src_code;
> + code->code = src_rgb_codes[code->index];
> } else {
> if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list))
> return -EINVAL;
> @@ -170,7 +172,7 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_frame_size_enum *fse)
> {
> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
> + int i;
unsigned
>
> if (fse->index)
> return -EINVAL;
> @@ -181,8 +183,13 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd,
>
> if (!vpix)
> return -EINVAL;
> - } else if (fse->code != vdeb->src_code) {
> - return -EINVAL;
> + } else {
You can declare i inside this else statement.
> + for (i = 0; i < ARRAY_SIZE(src_rgb_codes); i++) {
> + if (src_rgb_codes[i] == fse->code)
> + break;
> + }
> + if (i == ARRAY_SIZE(src_rgb_codes))
> + return -EINVAL;
> }
>
> fse->min_width = VIMC_FRAME_MIN_WIDTH;
> @@ -237,6 +244,8 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd,
> {
> struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
> struct v4l2_mbus_framefmt *sink_fmt;
> + unsigned int i;
> + u32 *src_code;
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> /* Do not change the format while stream is on */
> @@ -244,8 +253,10 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd,
> return -EBUSY;
>
> sink_fmt = &vdeb->sink_fmt;
> + src_code = &vdeb->src_code;
> } else {
> sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
> + src_code = &v4l2_subdev_get_try_format(sd, cfg, 1)->code;
> }
>
> /*
> @@ -253,9 +264,17 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd,
> * it is propagated from the sink
> */
> if (VIMC_IS_SRC(fmt->pad)) {
> + u32 code = fmt->format.code;
> +
> fmt->format = *sink_fmt;
> - /* TODO: Add support for other formats */
> - fmt->format.code = vdeb->src_code;
> +
> + for (i = 0; i < ARRAY_SIZE(src_rgb_codes); i++) {
> + if (src_rgb_codes[i] == code) {
> + *src_code = src_rgb_codes[i];
> + break;
> + }
> + }
Maybe you can add a function for this, since you also repeat this loop above.
Regards,
Helen
> + fmt->format.code = *src_code;
> } else {
> /* Set the new format in the sink pad */
> vimc_deb_adjust_sink_fmt(&fmt->format);
> @@ -291,11 +310,21 @@ static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb,
> unsigned int col,
> unsigned int rgb[3])
> {
> + const struct vimc_pix_map *vpix;
> unsigned int i, index;
>
> + vpix = vimc_pix_map_by_code(vdeb->src_code);
> index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3);
> - for (i = 0; i < 3; i++)
> - vdeb->src_frame[index + i] = rgb[i];
> + for (i = 0; i < 3; i++) {
> + switch (vpix->pixelformat) {
> + case V4L2_PIX_FMT_RGB24:
> + vdeb->src_frame[index + i] = rgb[i];
> + break;
> + case V4L2_PIX_FMT_BGR24:
> + vdeb->src_frame[index + i] = rgb[2-i];
> + break;
> + }
> + }
> }
>
> static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable)
>
next prev parent reply other threads:[~2020-02-05 14:17 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-02 15:50 [PATCH 0/3] media: vimc: Add support for GBR and BGR formats on source pad of debayer Nícolas F. R. A. Prado
2020-02-02 15:50 ` [PATCH 1/3] media: vimc: Support multiple buscodes for each pixelformat Nícolas F. R. A. Prado
2020-02-05 14:17 ` Helen Koike
2020-02-08 20:36 ` Nícolas F. R. A. Prado
2020-02-02 15:50 ` [PATCH 2/3] media: vimc: Add GBR media bus code Nícolas F. R. A. Prado
2020-02-05 14:17 ` Helen Koike
2020-02-09 14:00 ` Nícolas F. R. A. Prado
2020-02-02 15:50 ` [PATCH 3/3] media: vimc: deb: Add support for GBR and BGR bus formats on source pad Nícolas F. R. A. Prado
2020-02-05 14:17 ` Helen Koike [this message]
2020-02-09 17:09 ` [PATCH 0/3] media: vimc: Add support for GBR and BGR formats on source pad of debayer Ezequiel Garcia
2020-02-09 18:26 ` Nícolas F. R. A. Prado
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cc1e3f33-450b-2501-3b45-fddace4edcb8@collabora.com \
--to=helen.koike@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lkcamp@lists.libreplanetbr.org \
--cc=mchehab@kernel.org \
--cc=nfraprado@protonmail.com \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).