[PATCH 01/14] docs: move DMA kAPI to Documentation/core-api

[PATCH 01/14] docs: move DMA kAPI to Documentation/core-api

[Mauro Carvalho Chehab]

Move those files to the core-api, where they belong, renaming
them to ReST and adding to the core API index file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../{DMA-API-HOWTO.txt => core-api/dma-api-howto.rst}         | 0
 Documentation/{DMA-API.txt => core-api/dma-api.rst}           | 0
 .../{DMA-attributes.txt => core-api/dma-attributes.rst}       | 0
 Documentation/{DMA-ISA-LPC.txt => core-api/dma-isa-lpc.rst}   | 0
 Documentation/core-api/index.rst                              | 4 ++++
 5 files changed, 4 insertions(+)
 rename Documentation/{DMA-API-HOWTO.txt => core-api/dma-api-howto.rst} (100%)
 rename Documentation/{DMA-API.txt => core-api/dma-api.rst} (100%)
 rename Documentation/{DMA-attributes.txt => core-api/dma-attributes.rst} (100%)
 rename Documentation/{DMA-ISA-LPC.txt => core-api/dma-isa-lpc.rst} (100%)

diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/core-api/dma-api-howto.rst
similarity index 100%
rename from Documentation/DMA-API-HOWTO.txt
rename to Documentation/core-api/dma-api-howto.rst
diff --git a/Documentation/DMA-API.txt b/Documentation/core-api/dma-api.rst
similarity index 100%
rename from Documentation/DMA-API.txt
rename to Documentation/core-api/dma-api.rst
diff --git a/Documentation/DMA-attributes.txt b/Documentation/core-api/dma-attributes.rst
similarity index 100%
rename from Documentation/DMA-attributes.txt
rename to Documentation/core-api/dma-attributes.rst
diff --git a/Documentation/DMA-ISA-LPC.txt b/Documentation/core-api/dma-isa-lpc.rst
similarity index 100%
rename from Documentation/DMA-ISA-LPC.txt
rename to Documentation/core-api/dma-isa-lpc.rst
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index b29c4a07beda..c00aef843341 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -80,6 +80,10 @@ more memory-management documentation in :doc:`/vm/index`.
    :maxdepth: 1
 
    memory-allocation
+   dma-api
+   dma-api-howto
+   dma-attributes
+   dma-isa-lpc
    mm-api
    genalloc
    pin_user_pages
-- 
2.25.4

[PATCH 02/14] docs: add bus-virt-phys-mapping.txt to core-api

[Mauro Carvalho Chehab]

This describes an old interface used prior the new DMA-API
interfaces. Add it to the core-api guide, just after the
DMA stuff.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../bus-virt-phys-mapping.rst}                                   | 0
 Documentation/core-api/index.rst                                 | 1 +
 2 files changed, 1 insertion(+)
 rename Documentation/{bus-virt-phys-mapping.txt => core-api/bus-virt-phys-mapping.rst} (100%)

diff --git a/Documentation/bus-virt-phys-mapping.txt b/Documentation/core-api/bus-virt-phys-mapping.rst
similarity index 100%
rename from Documentation/bus-virt-phys-mapping.txt
rename to Documentation/core-api/bus-virt-phys-mapping.rst
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index c00aef843341..b70039d458a7 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -84,6 +84,7 @@ more memory-management documentation in :doc:`/vm/index`.
    dma-api-howto
    dma-attributes
    dma-isa-lpc
+   bus-virt-phys-mapping
    mm-api
    genalloc
    pin_user_pages
-- 
2.25.4

[PATCH 04/14] docs: move IPMI.txt to the driver API book

[Mauro Carvalho Chehab]

The IPMI is under drivers/char. This doc describes the kAPI
part of the IPMI (mainly).

So, move it to the driver-api directory and add it to the
corresponding index.rst file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/driver-api/index.rst              | 1 +
 Documentation/{IPMI.txt => driver-api/ipmi.rst} | 0
 2 files changed, 1 insertion(+)
 rename Documentation/{IPMI.txt => driver-api/ipmi.rst} (100%)

diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index dcc47c029f8e..6567187e7687 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -39,6 +39,7 @@ available subsections can be seen below.
    spi
    i2c
    ipmb
+   ipmi
    i3c/index
    interconnect
    devfreq
diff --git a/Documentation/IPMI.txt b/Documentation/driver-api/ipmi.rst
similarity index 100%
rename from Documentation/IPMI.txt
rename to Documentation/driver-api/ipmi.rst
-- 
2.25.4

[PATCH 05/14] docs: fix references for ipmi.rst file

[Mauro Carvalho Chehab]

As this file got moved, fix references for it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 MAINTAINERS                        | 2 +-
 drivers/char/ipmi/Kconfig          | 2 +-
 drivers/char/ipmi/ipmi_si_hotmod.c | 2 +-
 drivers/char/ipmi/ipmi_si_intf.c   | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index b0cf6c358136..a1d7af532950 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8932,7 +8932,7 @@ M:	Corey Minyard <minyard@acm.org>
 L:	openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
 S:	Supported
 W:	http://openipmi.sourceforge.net/
-F:	Documentation/IPMI.txt
+F:	Documentation/driver-api/ipmi.rst
 F:	Documentation/devicetree/bindings/ipmi/
 F:	drivers/char/ipmi/
 F:	include/linux/ipmi*
diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
index 7dc2c3ec4051..07847d9a459a 100644
--- a/drivers/char/ipmi/Kconfig
+++ b/drivers/char/ipmi/Kconfig
@@ -14,7 +14,7 @@ menuconfig IPMI_HANDLER
 	  IPMI is a standard for managing sensors (temperature,
 	  voltage, etc.) in a system.
 
-	  See <file:Documentation/IPMI.txt> for more details on the driver.
+	  See <file:Documentation/driver-api/ipmi.rst> for more details on the driver.
 
 	  If unsure, say N.
 
diff --git a/drivers/char/ipmi/ipmi_si_hotmod.c b/drivers/char/ipmi/ipmi_si_hotmod.c
index 42a925f8cf69..4fbb4e18bae2 100644
--- a/drivers/char/ipmi/ipmi_si_hotmod.c
+++ b/drivers/char/ipmi/ipmi_si_hotmod.c
@@ -18,7 +18,7 @@ static int hotmod_handler(const char *val, const struct kernel_param *kp);
 
 module_param_call(hotmod, hotmod_handler, NULL, NULL, 0200);
 MODULE_PARM_DESC(hotmod, "Add and remove interfaces.  See"
-		 " Documentation/IPMI.txt in the kernel sources for the"
+		 " Documentation/driver-api/ipmi.rst in the kernel sources for the"
 		 " gory details.");
 
 /*
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index c7cc8538b84a..77b8d551ae7f 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -968,7 +968,7 @@ static inline bool ipmi_thread_busy_wait(enum si_sm_result smi_result,
  * that are not BT and do not have interrupts.  It starts spinning
  * when an operation is complete or until max_busy tells it to stop
  * (if that is enabled).  See the paragraph on kimid_max_busy_us in
- * Documentation/IPMI.txt for details.
+ * Documentation/driver-api/ipmi.rst for details.
  */
 static int ipmi_thread(void *data)
 {
-- 
2.25.4

[PATCH 06/14] docs: debugging-via-ohci1394.txt: add it to the core-api book

[Mauro Carvalho Chehab]

There is an special chapter inside the core-api book about
some debug infrastructure like tracepoints and debug objects.

It sounded to me that this is the best place to add a chapter
explaining how to use a FireWire controller to do remote
kernel debugging, as explained on this document.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/admin-guide/kernel-parameters.txt                 | 2 +-
 .../debugging-via-ohci1394.rst}                                 | 0
 Documentation/core-api/index.rst                                | 1 +
 lib/Kconfig.debug                                               | 2 +-
 4 files changed, 3 insertions(+), 2 deletions(-)
 rename Documentation/{debugging-via-ohci1394.txt => core-api/debugging-via-ohci1394.rst} (100%)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 25644daa36ea..d9b61da7809d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3350,7 +3350,7 @@
 			See Documentation/admin-guide/sysctl/vm.rst for details.
 
 	ohci1394_dma=early	[HW] enable debugging via the ohci1394 driver.
-			See Documentation/debugging-via-ohci1394.txt for more
+			See Documentation/core-api/debugging-via-ohci1394.rst for more
 			info.
 
 	olpc_ec_timeout= [OLPC] ms delay when issuing EC commands
diff --git a/Documentation/debugging-via-ohci1394.txt b/Documentation/core-api/debugging-via-ohci1394.rst
similarity index 100%
rename from Documentation/debugging-via-ohci1394.txt
rename to Documentation/core-api/debugging-via-ohci1394.rst
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index b70039d458a7..ab056b3626f4 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -99,6 +99,7 @@ Interfaces for kernel debugging
 
    debug-objects
    tracepoint
+   debugging-via-ohci1394
 
 Everything else
 ===============
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 8e4aded46281..4e631f294737 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1552,7 +1552,7 @@ config PROVIDE_OHCI1394_DMA_INIT
 	  This code (~1k) is freed after boot. By then, the firewire stack
 	  in charge of the OHCI-1394 controllers should be used instead.
 
-	  See Documentation/debugging-via-ohci1394.txt for more information.
+	  See Documentation/core-api/debugging-via-ohci1394.rst for more information.
 
 source "samples/Kconfig"
 
-- 
2.25.4

[PATCH 07/14] docs: add IRQ documentation at the core-api book

[Mauro Carvalho Chehab]

There are 4 IRQ documentation files under Documentation/*.txt.

Move them into a new directory (core-api/irq) and add a new
index file for it.

While here, use a title markup for the Debugging section of the
irq-domain.rst file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/admin-guide/hw-vuln/l1tf.rst            |  2 +-
 Documentation/admin-guide/kernel-per-CPU-kthreads.rst |  2 +-
 Documentation/core-api/index.rst                      |  1 +
 Documentation/{IRQ.txt => core-api/irq/concepts.rst}  |  0
 Documentation/core-api/irq/index.rst                  | 11 +++++++++++
 .../irq/irq-affinity.rst}                             |  0
 .../{IRQ-domain.txt => core-api/irq/irq-domain.rst}   |  3 ++-
 .../irq/irqflags-tracing.rst}                         |  0
 Documentation/ia64/irq-redir.rst                      |  2 +-
 Documentation/networking/scaling.rst                  |  4 ++--
 Documentation/translations/zh_CN/IRQ.txt              |  4 ++--
 MAINTAINERS                                           |  2 +-
 12 files changed, 22 insertions(+), 9 deletions(-)
 rename Documentation/{IRQ.txt => core-api/irq/concepts.rst} (100%)
 create mode 100644 Documentation/core-api/irq/index.rst
 rename Documentation/{IRQ-affinity.txt => core-api/irq/irq-affinity.rst} (100%)
 rename Documentation/{IRQ-domain.txt => core-api/irq/irq-domain.rst} (99%)
 rename Documentation/{irqflags-tracing.txt => core-api/irq/irqflags-tracing.rst} (100%)

diff --git a/Documentation/admin-guide/hw-vuln/l1tf.rst b/Documentation/admin-guide/hw-vuln/l1tf.rst
index f83212fae4d5..3eeeb488d955 100644
--- a/Documentation/admin-guide/hw-vuln/l1tf.rst
+++ b/Documentation/admin-guide/hw-vuln/l1tf.rst
@@ -268,7 +268,7 @@ Guest mitigation mechanisms
    /proc/irq/$NR/smp_affinity[_list] files. Limited documentation is
    available at:
 
-   https://www.kernel.org/doc/Documentation/IRQ-affinity.txt
+   https://www.kernel.org/doc/Documentation/core-api/irq/irq-affinity.rst
 
 .. _smt_control:
 
diff --git a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
index 21818aca4708..dc36aeb65d0a 100644
--- a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
+++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
@@ -10,7 +10,7 @@ them to a "housekeeping" CPU dedicated to such work.
 References
 ==========
 
--	Documentation/IRQ-affinity.txt:  Binding interrupts to sets of CPUs.
+-	Documentation/core-api/irq/irq-affinity.rst:  Binding interrupts to sets of CPUs.
 
 -	Documentation/admin-guide/cgroup-v1:  Using cgroups to bind tasks to sets of CPUs.
 
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index ab056b3626f4..49a885e83a55 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -52,6 +52,7 @@ How Linux keeps everything from happening at the same time.  See
 
    atomic_ops
    refcount-vs-atomic
+   irq/index
    local_ops
    padata
    ../RCU/index
diff --git a/Documentation/IRQ.txt b/Documentation/core-api/irq/concepts.rst
similarity index 100%
rename from Documentation/IRQ.txt
rename to Documentation/core-api/irq/concepts.rst
diff --git a/Documentation/core-api/irq/index.rst b/Documentation/core-api/irq/index.rst
new file mode 100644
index 000000000000..0d65d11e5420
--- /dev/null
+++ b/Documentation/core-api/irq/index.rst
@@ -0,0 +1,11 @@
+====
+IRQs
+====
+
+.. toctree::
+   :maxdepth: 1
+
+   concepts
+   irq-affinity
+   irq-domain
+   irqflags-tracing
diff --git a/Documentation/IRQ-affinity.txt b/Documentation/core-api/irq/irq-affinity.rst
similarity index 100%
rename from Documentation/IRQ-affinity.txt
rename to Documentation/core-api/irq/irq-affinity.rst
diff --git a/Documentation/IRQ-domain.txt b/Documentation/core-api/irq/irq-domain.rst
similarity index 99%
rename from Documentation/IRQ-domain.txt
rename to Documentation/core-api/irq/irq-domain.rst
index 507775cce753..096db12f32d5 100644
--- a/Documentation/IRQ-domain.txt
+++ b/Documentation/core-api/irq/irq-domain.rst
@@ -263,7 +263,8 @@ needs to:
 Hierarchy irq_domain is in no way x86 specific, and is heavily used to
 support other architectures, such as ARM, ARM64 etc.
 
-=== Debugging ===
+Debugging
+=========
 
 Most of the internals of the IRQ subsystem are exposed in debugfs by
 turning CONFIG_GENERIC_IRQ_DEBUGFS on.
diff --git a/Documentation/irqflags-tracing.txt b/Documentation/core-api/irq/irqflags-tracing.rst
similarity index 100%
rename from Documentation/irqflags-tracing.txt
rename to Documentation/core-api/irq/irqflags-tracing.rst
diff --git a/Documentation/ia64/irq-redir.rst b/Documentation/ia64/irq-redir.rst
index 39bf94484a15..6bbbbe4f73ef 100644
--- a/Documentation/ia64/irq-redir.rst
+++ b/Documentation/ia64/irq-redir.rst
@@ -7,7 +7,7 @@ IRQ affinity on IA64 platforms
 
 By writing to /proc/irq/IRQ#/smp_affinity the interrupt routing can be
 controlled. The behavior on IA64 platforms is slightly different from
-that described in Documentation/IRQ-affinity.txt for i386 systems.
+that described in Documentation/core-api/irq/irq-affinity.rst for i386 systems.
 
 Because of the usage of SAPIC mode and physical destination mode the
 IRQ target is one particular CPU and cannot be a mask of several
diff --git a/Documentation/networking/scaling.rst b/Documentation/networking/scaling.rst
index f78d7bf27ff5..8f0347b9fb3d 100644
--- a/Documentation/networking/scaling.rst
+++ b/Documentation/networking/scaling.rst
@@ -81,7 +81,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default,
 an IRQ may be handled on any CPU. Because a non-negligible part of packet
 processing takes place in receive interrupt handling, it is advantageous
 to spread receive interrupts between CPUs. To manually adjust the IRQ
-affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems
+affinity of each interrupt see Documentation/core-api/irq/irq-affinity.rst. Some systems
 will be running irqbalance, a daemon that dynamically optimizes IRQ
 assignments and as a result may override any manual settings.
 
@@ -160,7 +160,7 @@ can be configured for each receive queue using a sysfs file entry::
 
 This file implements a bitmap of CPUs. RPS is disabled when it is zero
 (the default), in which case packets are processed on the interrupting
-CPU. Documentation/IRQ-affinity.txt explains how CPUs are assigned to
+CPU. Documentation/core-api/irq/irq-affinity.rst explains how CPUs are assigned to
 the bitmap.
 
 
diff --git a/Documentation/translations/zh_CN/IRQ.txt b/Documentation/translations/zh_CN/IRQ.txt
index 956026d5cf82..9aec8dca4fcf 100644
--- a/Documentation/translations/zh_CN/IRQ.txt
+++ b/Documentation/translations/zh_CN/IRQ.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/IRQ.txt
+Chinese translated version of Documentation/core-api/irq/index.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -9,7 +9,7 @@ or if there is a problem with the translation.
 Maintainer: Eric W. Biederman <ebiederman@xmission.com>
 Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
 ---------------------------------------------------------------------
-Documentation/IRQ.txt 的中文翻译
+Documentation/core-api/irq/index.rst 的中文翻译
 
 如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
diff --git a/MAINTAINERS b/MAINTAINERS
index a1d7af532950..6eb3d85a646f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8974,7 +8974,7 @@ IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
 M:	Marc Zyngier <maz@kernel.org>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
-F:	Documentation/IRQ-domain.txt
+F:	Documentation/core-api/irq/irq-domain.rst
 F:	include/linux/irqdomain.h
 F:	kernel/irq/irqdomain.c
 F:	kernel/irq/msi.c
-- 
2.25.4

[PATCH 08/14] docs: move kobject and kref docs into the core-api book

[Mauro Carvalho Chehab]

Both documents are documenting Kernel core objects. So, add
them into the core-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/core-api/index.rst              | 1 +
 Documentation/core-api/kobject.rst            | 2 +-
 Documentation/{kref.txt => core-api/kref.rst} | 0
 3 files changed, 2 insertions(+), 1 deletion(-)
 rename Documentation/{kref.txt => core-api/kref.rst} (100%)

diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index 49a885e83a55..eeac63ba17c3 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -31,6 +31,7 @@ Library functionality that is used throughout the kernel.
    :maxdepth: 1
 
    kobject
+   kref
    assoc_array
    xarray
    idr
diff --git a/Documentation/core-api/kobject.rst b/Documentation/core-api/kobject.rst
index 1f62d4d7d966..44c02be65475 100644
--- a/Documentation/core-api/kobject.rst
+++ b/Documentation/core-api/kobject.rst
@@ -210,7 +210,7 @@ statically and will warn the developer of this improper usage.
 If all that you want to use a kobject for is to provide a reference counter
 for your structure, please use the struct kref instead; a kobject would be
 overkill.  For more information on how to use struct kref, please see the
-file Documentation/kref.txt in the Linux kernel source tree.
+file Documentation/core-api/kref.rst in the Linux kernel source tree.
 
 
 Creating "simple" kobjects
diff --git a/Documentation/kref.txt b/Documentation/core-api/kref.rst
similarity index 100%
rename from Documentation/kref.txt
rename to Documentation/core-api/kref.rst
-- 
2.25.4

[PATCH 09/14] docs: move digsig docs to the security book

[Mauro Carvalho Chehab]

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/{digsig.txt => security/digsig.rst} | 0
 Documentation/security/index.rst                  | 1 +
 2 files changed, 1 insertion(+)
 rename Documentation/{digsig.txt => security/digsig.rst} (100%)

diff --git a/Documentation/digsig.txt b/Documentation/security/digsig.rst
similarity index 100%
rename from Documentation/digsig.txt
rename to Documentation/security/digsig.rst
diff --git a/Documentation/security/index.rst b/Documentation/security/index.rst
index fc503dd689a7..8129405eb2cc 100644
--- a/Documentation/security/index.rst
+++ b/Documentation/security/index.rst
@@ -15,3 +15,4 @@ Security Documentation
    self-protection
    siphash
    tpm/index
+   digsig
-- 
2.25.4

[PATCH 10/14] docs: move locking-specific documenta to locking/ directory

[Mauro Carvalho Chehab]

Several files under Documentation/*.txt describe some type of
locking API. Move them to locking/ subdir and add to the
locking/index.rst index file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../{futex-requeue-pi.txt => locking/futex-requeue-pi.rst} | 0
 Documentation/{hwspinlock.txt => locking/hwspinlock.rst}   | 0
 Documentation/locking/index.rst                            | 7 +++++++
 .../percpu-rw-semaphore.rst}                               | 0
 Documentation/{pi-futex.txt => locking/pi-futex.rst}       | 0
 .../{preempt-locking.txt => locking/preempt-locking.rst}   | 0
 .../{robust-futex-ABI.txt => locking/robust-futex-ABI.rst} | 0
 .../{robust-futexes.txt => locking/robust-futexes.rst}     | 0
 Documentation/locking/rt-mutex.rst                         | 2 +-
 MAINTAINERS                                                | 6 +++---
 10 files changed, 11 insertions(+), 4 deletions(-)
 rename Documentation/{futex-requeue-pi.txt => locking/futex-requeue-pi.rst} (100%)
 rename Documentation/{hwspinlock.txt => locking/hwspinlock.rst} (100%)
 rename Documentation/{percpu-rw-semaphore.txt => locking/percpu-rw-semaphore.rst} (100%)
 rename Documentation/{pi-futex.txt => locking/pi-futex.rst} (100%)
 rename Documentation/{preempt-locking.txt => locking/preempt-locking.rst} (100%)
 rename Documentation/{robust-futex-ABI.txt => locking/robust-futex-ABI.rst} (100%)
 rename Documentation/{robust-futexes.txt => locking/robust-futexes.rst} (100%)

diff --git a/Documentation/futex-requeue-pi.txt b/Documentation/locking/futex-requeue-pi.rst
similarity index 100%
rename from Documentation/futex-requeue-pi.txt
rename to Documentation/locking/futex-requeue-pi.rst
diff --git a/Documentation/hwspinlock.txt b/Documentation/locking/hwspinlock.rst
similarity index 100%
rename from Documentation/hwspinlock.txt
rename to Documentation/locking/hwspinlock.rst
diff --git a/Documentation/locking/index.rst b/Documentation/locking/index.rst
index 5d6800a723dc..d785878cad65 100644
--- a/Documentation/locking/index.rst
+++ b/Documentation/locking/index.rst
@@ -16,6 +16,13 @@ locking
     rt-mutex
     spinlocks
     ww-mutex-design
+    preempt-locking
+    pi-futex
+    futex-requeue-pi
+    hwspinlock
+    percpu-rw-semaphore
+    robust-futexes
+    robust-futex-ABI
 
 .. only::  subproject and html
 
diff --git a/Documentation/percpu-rw-semaphore.txt b/Documentation/locking/percpu-rw-semaphore.rst
similarity index 100%
rename from Documentation/percpu-rw-semaphore.txt
rename to Documentation/locking/percpu-rw-semaphore.rst
diff --git a/Documentation/pi-futex.txt b/Documentation/locking/pi-futex.rst
similarity index 100%
rename from Documentation/pi-futex.txt
rename to Documentation/locking/pi-futex.rst
diff --git a/Documentation/preempt-locking.txt b/Documentation/locking/preempt-locking.rst
similarity index 100%
rename from Documentation/preempt-locking.txt
rename to Documentation/locking/preempt-locking.rst
diff --git a/Documentation/robust-futex-ABI.txt b/Documentation/locking/robust-futex-ABI.rst
similarity index 100%
rename from Documentation/robust-futex-ABI.txt
rename to Documentation/locking/robust-futex-ABI.rst
diff --git a/Documentation/robust-futexes.txt b/Documentation/locking/robust-futexes.rst
similarity index 100%
rename from Documentation/robust-futexes.txt
rename to Documentation/locking/robust-futexes.rst
diff --git a/Documentation/locking/rt-mutex.rst b/Documentation/locking/rt-mutex.rst
index c365dc302081..3b5097a380e6 100644
--- a/Documentation/locking/rt-mutex.rst
+++ b/Documentation/locking/rt-mutex.rst
@@ -4,7 +4,7 @@ RT-mutex subsystem with PI support
 
 RT-mutexes with priority inheritance are used to support PI-futexes,
 which enable pthread_mutex_t priority inheritance attributes
-(PTHREAD_PRIO_INHERIT). [See Documentation/pi-futex.txt for more details
+(PTHREAD_PRIO_INHERIT). [See Documentation/locking/pi-futex.rst for more details
 about PI-futexes.]
 
 This technology was developed in the -rt tree and streamlined for
diff --git a/MAINTAINERS b/MAINTAINERS
index 6eb3d85a646f..1aa6e89e7424 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7042,13 +7042,13 @@ R:	Darren Hart <dvhart@infradead.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git locking/core
-F:	Documentation/*futex*
+F:	Documentation/locking/*futex*
 F:	include/asm-generic/futex.h
 F:	include/linux/futex.h
 F:	include/uapi/linux/futex.h
 F:	kernel/futex.c
 F:	tools/perf/bench/futex*
-F:	tools/testing/selftests/futex/
+F:	Documentation/locking/*futex*
 
 GASKET DRIVER FRAMEWORK
 M:	Rob Springer <rspringer@google.com>
@@ -7519,7 +7519,7 @@ L:	linux-remoteproc@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git hwspinlock-next
 F:	Documentation/devicetree/bindings/hwlock/
-F:	Documentation/hwspinlock.txt
+F:	Documentation/locking/hwspinlock.rst
 F:	drivers/hwspinlock/
 F:	include/linux/hwspinlock.h
 
-- 
2.25.4

[PATCH 11/14] docs: move other kAPI documents to core-api

[Mauro Carvalho Chehab]

There are a number of random documents that seem to be
describing some aspects of the core-api. Move them to such
directory, adding them at the core-api/index.rst file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/admin-guide/sysctl/vm.rst                     | 2 +-
 Documentation/core-api/index.rst                            | 6 ++++++
 Documentation/{mailbox.txt => core-api/mailbox.rst}         | 0
 Documentation/{nommu-mmap.txt => core-api/nommu-mmap.rst}   | 0
 .../{this_cpu_ops.txt => core-api/this_cpu_ops.rst}         | 0
 .../unaligned-memory-access.rst}                            | 0
 Documentation/gpu/drm-mm.rst                                | 2 +-
 arch/Kconfig                                                | 2 +-
 init/Kconfig                                                | 2 +-
 mm/Kconfig                                                  | 2 +-
 mm/nommu.c                                                  | 2 +-
 11 files changed, 12 insertions(+), 6 deletions(-)
 rename Documentation/{mailbox.txt => core-api/mailbox.rst} (100%)
 rename Documentation/{nommu-mmap.txt => core-api/nommu-mmap.rst} (100%)
 rename Documentation/{this_cpu_ops.txt => core-api/this_cpu_ops.rst} (100%)
 rename Documentation/{unaligned-memory-access.txt => core-api/unaligned-memory-access.rst} (100%)

diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst
index 0329a4d3fa9e..0bf2f2a84a9f 100644
--- a/Documentation/admin-guide/sysctl/vm.rst
+++ b/Documentation/admin-guide/sysctl/vm.rst
@@ -583,7 +583,7 @@ trimming of allocations is initiated.
 
 The default value is 1.
 
-See Documentation/nommu-mmap.txt for more information.
+See Documentation/core-api/nommu-mmap.rst for more information.
 
 
 numa_zonelist_order
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index eeac63ba17c3..fe03a639a91a 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -38,10 +38,14 @@ Library functionality that is used throughout the kernel.
    circular-buffers
    rbtree
    generic-radix-tree
+   mailbox
    packing
+   rbtree
+   this_cpu_ops
    timekeeping
    errseq
 
+
 Concurrency primitives
 ======================
 
@@ -82,11 +86,13 @@ more memory-management documentation in :doc:`/vm/index`.
    :maxdepth: 1
 
    memory-allocation
+   unaligned-memory-access
    dma-api
    dma-api-howto
    dma-attributes
    dma-isa-lpc
    bus-virt-phys-mapping
+   nommu-mmap
    mm-api
    genalloc
    pin_user_pages
diff --git a/Documentation/mailbox.txt b/Documentation/core-api/mailbox.rst
similarity index 100%
rename from Documentation/mailbox.txt
rename to Documentation/core-api/mailbox.rst
diff --git a/Documentation/nommu-mmap.txt b/Documentation/core-api/nommu-mmap.rst
similarity index 100%
rename from Documentation/nommu-mmap.txt
rename to Documentation/core-api/nommu-mmap.rst
diff --git a/Documentation/this_cpu_ops.txt b/Documentation/core-api/this_cpu_ops.rst
similarity index 100%
rename from Documentation/this_cpu_ops.txt
rename to Documentation/core-api/this_cpu_ops.rst
diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/core-api/unaligned-memory-access.rst
similarity index 100%
rename from Documentation/unaligned-memory-access.txt
rename to Documentation/core-api/unaligned-memory-access.rst
diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst
index 1839762044be..e0bbcbb6f512 100644
--- a/Documentation/gpu/drm-mm.rst
+++ b/Documentation/gpu/drm-mm.rst
@@ -314,7 +314,7 @@ To use drm_gem_cma_get_unmapped_area(), drivers must fill the struct
 a pointer on drm_gem_cma_get_unmapped_area().
 
 More detailed information about get_unmapped_area can be found in
-Documentation/nommu-mmap.txt
+Documentation/core-api/nommu-mmap.rst
 
 Memory Coherency
 ----------------
diff --git a/arch/Kconfig b/arch/Kconfig
index 786a85d4ad40..b0b4046c9d13 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -147,7 +147,7 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	  problems with received packets if doing so would not help
 	  much.
 
-	  See Documentation/unaligned-memory-access.txt for more
+	  See Documentation/core-api/unaligned-memory-access.rst for more
 	  information on the topic of unaligned memory accesses.
 
 config ARCH_USE_BUILTIN_BSWAP
diff --git a/init/Kconfig b/init/Kconfig
index 492bb7000aa4..61ccfd9243e3 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1950,7 +1950,7 @@ config MMAP_ALLOW_UNINITIALIZED
 	  userspace.  Since that isn't generally a problem on no-MMU systems,
 	  it is normally safe to say Y here.
 
-	  See Documentation/nommu-mmap.txt for more information.
+	  See Documentation/core-api/nommu-mmap.rst for more information.
 
 config SYSTEM_DATA_VERIFICATION
 	def_bool n
diff --git a/mm/Kconfig b/mm/Kconfig
index db626b8d4fdb..2a133c40a4b7 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -382,7 +382,7 @@ config NOMMU_INITIAL_TRIM_EXCESS
 	  This option specifies the initial value of this option.  The default
 	  of 1 says that all excess pages should be trimmed.
 
-	  See Documentation/nommu-mmap.txt for more information.
+	  See Documentation/core-api/nommu-mmap.rst for more information.
 
 config TRANSPARENT_HUGEPAGE
 	bool "Transparent Hugepage Support"
diff --git a/mm/nommu.c b/mm/nommu.c
index 371697bf372d..e3e707d6f124 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -5,7 +5,7 @@
  *  Replacement code for mm functions to support CPU's that don't
  *  have any form of memory management unit (thus no virtual memory).
  *
- *  See Documentation/nommu-mmap.txt
+ *  See Documentation/core-api/nommu-mmap.rst
  *
  *  Copyright (c) 2004-2008 David Howells <dhowells@redhat.com>
  *  Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com>
-- 
2.25.4

[PATCH 12/14] docs: move remaining stuff under Documentation/*.txt to Documentation/staging

[Mauro Carvalho Chehab]

There are several files that I was unable to find a proper place
for them, and 3 ones that are still in plain old text format.

Let's place those stuff behind the carpet, as we'd like to keep the
root directory clean.

We can later discuss and move those into better places.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/index.rst                       | 13 ++++++++
 .../{crc32.txt => staging/crc32.rst}          |  0
 Documentation/staging/index.rst               | 32 +++++++++++++++++++
 .../{kprobes.txt => staging/kprobes.rst}      |  0
 Documentation/{lzo.txt => staging/lzo.rst}    |  0
 .../remoteproc.rst}                           |  2 +-
 .../{rpmsg.txt => staging/rpmsg.rst}          |  0
 .../speculation.rst}                          |  8 +++--
 .../static-keys.rst}                          |  0
 Documentation/{tee.txt => staging/tee.rst}    |  1 +
 Documentation/{xz.txt => staging/xz.rst}      |  0
 Documentation/trace/kprobetrace.rst           |  2 +-
 MAINTAINERS                                   | 10 +++---
 include/asm-generic/bitops/atomic.h           |  2 +-
 include/linux/jump_label.h                    |  2 +-
 lib/crc32.c                                   |  2 +-
 lib/lzo/lzo1x_decompress_safe.c               |  2 +-
 lib/xz/Kconfig                                |  2 +-
 samples/kprobes/kprobe_example.c              |  2 +-
 samples/kprobes/kretprobe_example.c           |  2 +-
 20 files changed, 65 insertions(+), 17 deletions(-)
 rename Documentation/{crc32.txt => staging/crc32.rst} (100%)
 create mode 100644 Documentation/staging/index.rst
 rename Documentation/{kprobes.txt => staging/kprobes.rst} (100%)
 rename Documentation/{lzo.txt => staging/lzo.rst} (100%)
 rename Documentation/{remoteproc.txt => staging/remoteproc.rst} (99%)
 rename Documentation/{rpmsg.txt => staging/rpmsg.rst} (100%)
 rename Documentation/{speculation.txt => staging/speculation.rst} (97%)
 rename Documentation/{static-keys.txt => staging/static-keys.rst} (100%)
 rename Documentation/{tee.txt => staging/tee.rst} (99%)
 rename Documentation/{xz.txt => staging/xz.rst} (100%)

diff --git a/Documentation/index.rst b/Documentation/index.rst
index af2b87afebc8..9a931e157db2 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -179,6 +179,19 @@ subprojects.
 
    filesystems/ext4/index
 
+Other documentation
+-------------------
+
+There are several unsorted documents that don't seem to fit on other parts
+of the documentation body, or may require some adjustments and/or conversion
+to ReStructured Text format, or are simply too old.
+
+.. toctree::
+   :maxdepth: 2
+
+   staging/index
+
+
 Translations
 ------------
 
diff --git a/Documentation/crc32.txt b/Documentation/staging/crc32.rst
similarity index 100%
rename from Documentation/crc32.txt
rename to Documentation/staging/crc32.rst
diff --git a/Documentation/staging/index.rst b/Documentation/staging/index.rst
new file mode 100644
index 000000000000..8e98517675ca
--- /dev/null
+++ b/Documentation/staging/index.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Unsorted Documentation
+======================
+
+.. toctree::
+   :maxdepth: 2
+
+   crc32
+   kprobes
+   lzo
+   remoteproc
+   rpmsg
+   speculation
+   static-keys
+   tee
+   xz
+
+Atomic Types
+============
+
+.. literalinclude:: ../atomic_t.txt
+
+Atomic bitops
+=============
+
+.. literalinclude:: ../atomic_bitops.txt
+
+Memory Barriers
+===============
+
+.. literalinclude:: ../memory-barriers.txt
diff --git a/Documentation/kprobes.txt b/Documentation/staging/kprobes.rst
similarity index 100%
rename from Documentation/kprobes.txt
rename to Documentation/staging/kprobes.rst
diff --git a/Documentation/lzo.txt b/Documentation/staging/lzo.rst
similarity index 100%
rename from Documentation/lzo.txt
rename to Documentation/staging/lzo.rst
diff --git a/Documentation/remoteproc.txt b/Documentation/staging/remoteproc.rst
similarity index 99%
rename from Documentation/remoteproc.txt
rename to Documentation/staging/remoteproc.rst
index 2be1147256e0..9cccd3dd6a4b 100644
--- a/Documentation/remoteproc.txt
+++ b/Documentation/staging/remoteproc.rst
@@ -22,7 +22,7 @@ for remote processors that supports this kind of communication. This way,
 platform-specific remoteproc drivers only need to provide a few low-level
 handlers, and then all rpmsg drivers will then just work
 (for more information about the virtio-based rpmsg bus and its drivers,
-please read Documentation/rpmsg.txt).
+please read Documentation/staging/rpmsg.rst).
 Registration of other types of virtio devices is now also possible. Firmwares
 just need to publish what kind of virtio devices do they support, and then
 remoteproc will add those devices. This makes it possible to reuse the
diff --git a/Documentation/rpmsg.txt b/Documentation/staging/rpmsg.rst
similarity index 100%
rename from Documentation/rpmsg.txt
rename to Documentation/staging/rpmsg.rst
diff --git a/Documentation/speculation.txt b/Documentation/staging/speculation.rst
similarity index 97%
rename from Documentation/speculation.txt
rename to Documentation/staging/speculation.rst
index 50d7ea857cff..8045d99bcf12 100644
--- a/Documentation/speculation.txt
+++ b/Documentation/staging/speculation.rst
@@ -1,9 +1,11 @@
+===========
+Speculation
+===========
+
 This document explains potential effects of speculation, and how undesirable
 effects can be mitigated portably using common APIs.
 
-===========
-Speculation
-===========
+------------------------------------------------------------------------------
 
 To improve performance and minimize average latencies, many contemporary CPUs
 employ speculative execution techniques such as branch prediction, performing
diff --git a/Documentation/static-keys.txt b/Documentation/staging/static-keys.rst
similarity index 100%
rename from Documentation/static-keys.txt
rename to Documentation/staging/static-keys.rst
diff --git a/Documentation/tee.txt b/Documentation/staging/tee.rst
similarity index 99%
rename from Documentation/tee.txt
rename to Documentation/staging/tee.rst
index c8fad81c4563..324604a15d17 100644
--- a/Documentation/tee.txt
+++ b/Documentation/staging/tee.rst
@@ -162,6 +162,7 @@ The AMD-TEE driver packages the command buffer payload for processing in TEE.
 The command buffer format for the different TEE commands can be found in [7].
 
 The TEE commands supported by AMD-TEE Trusted OS are:
+
 * TEE_CMD_ID_LOAD_TA          - loads a Trusted Application (TA) binary into
                                 TEE environment.
 * TEE_CMD_ID_UNLOAD_TA        - unloads TA binary from TEE environment.
diff --git a/Documentation/xz.txt b/Documentation/staging/xz.rst
similarity index 100%
rename from Documentation/xz.txt
rename to Documentation/staging/xz.rst
diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst
index cc4c5fc313df..c1709165c553 100644
--- a/Documentation/trace/kprobetrace.rst
+++ b/Documentation/trace/kprobetrace.rst
@@ -40,7 +40,7 @@ Synopsis of kprobe_events
  MEMADDR	: Address where the probe is inserted.
  MAXACTIVE	: Maximum number of instances of the specified function that
 		  can be probed simultaneously, or 0 for the default value
-		  as defined in Documentation/kprobes.txt section 1.3.1.
+		  as defined in Documentation/staging/kprobes.rst section 1.3.1.
 
  FETCHARGS	: Arguments. Each probe can have up to 128 args.
   %REG		: Fetch register REG
diff --git a/MAINTAINERS b/MAINTAINERS
index 1aa6e89e7424..8aa8f7c0db93 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9494,7 +9494,7 @@ M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
 M:	"David S. Miller" <davem@davemloft.net>
 M:	Masami Hiramatsu <mhiramat@kernel.org>
 S:	Maintained
-F:	Documentation/kprobes.txt
+F:	Documentation/staging/kprobes.rst
 F:	include/asm-generic/kprobes.h
 F:	include/linux/kprobes.h
 F:	kernel/kprobes.c
@@ -9855,7 +9855,7 @@ L:	linux-kernel@vger.kernel.org
 L:	linux-arch@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
-F:	Documentation/atomic_bitops.txt
+F:	Documentation/staging/atomic_bitops.txt
 F:	Documentation/atomic_t.txt
 F:	Documentation/core-api/atomic_ops.rst
 F:	Documentation/core-api/refcount-vs-atomic.rst
@@ -14357,7 +14357,7 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git rproc-next
 F:	Documentation/ABI/testing/sysfs-class-remoteproc
 F:	Documentation/devicetree/bindings/remoteproc/
-F:	Documentation/remoteproc.txt
+F:	Documentation/staging/remoteproc.rst
 F:	drivers/remoteproc/
 F:	include/linux/remoteproc.h
 F:	include/linux/remoteproc/
@@ -14369,7 +14369,7 @@ L:	linux-remoteproc@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git rpmsg-next
 F:	Documentation/ABI/testing/sysfs-bus-rpmsg
-F:	Documentation/rpmsg.txt
+F:	Documentation/staging/rpmsg.rst
 F:	drivers/rpmsg/
 F:	include/linux/rpmsg.h
 F:	include/linux/rpmsg/
@@ -16580,7 +16580,7 @@ TEE SUBSYSTEM
 M:	Jens Wiklander <jens.wiklander@linaro.org>
 L:	tee-dev@lists.linaro.org
 S:	Maintained
-F:	Documentation/tee.txt
+F:	Documentation/staging/tee.rst
 F:	drivers/tee/
 F:	include/linux/tee_drv.h
 F:	include/uapi/linux/tee.h
diff --git a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h
index dd90c9792909..edeeb8375006 100644
--- a/include/asm-generic/bitops/atomic.h
+++ b/include/asm-generic/bitops/atomic.h
@@ -8,7 +8,7 @@
 
 /*
  * Implementation of atomic bitops using atomic-fetch ops.
- * See Documentation/atomic_bitops.txt for details.
+ * See Documentation/staging/atomic_bitops.txt for details.
  */
 
 static inline void set_bit(unsigned int nr, volatile unsigned long *p)
diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h
index 3526c0aee954..32809624d422 100644
--- a/include/linux/jump_label.h
+++ b/include/linux/jump_label.h
@@ -68,7 +68,7 @@
  * Lacking toolchain and or architecture support, static keys fall back to a
  * simple conditional branch.
  *
- * Additional babbling in: Documentation/static-keys.txt
+ * Additional babbling in: Documentation/staging/static-keys.rst
  */
 
 #ifndef __ASSEMBLY__
diff --git a/lib/crc32.c b/lib/crc32.c
index 4a20455d1f61..35a03d03f973 100644
--- a/lib/crc32.c
+++ b/lib/crc32.c
@@ -24,7 +24,7 @@
  * Version 2.  See the file COPYING for more details.
  */
 
-/* see: Documentation/crc32.txt for a description of algorithms */
+/* see: Documentation/staging/crc32.rst for a description of algorithms */
 
 #include <linux/crc32.h>
 #include <linux/crc32poly.h>
diff --git a/lib/lzo/lzo1x_decompress_safe.c b/lib/lzo/lzo1x_decompress_safe.c
index 2717c7963acd..7892a40cf765 100644
--- a/lib/lzo/lzo1x_decompress_safe.c
+++ b/lib/lzo/lzo1x_decompress_safe.c
@@ -32,7 +32,7 @@
  * depending on the base count. Since the base count is taken from a u8
  * and a few bits, it is safe to assume that it will always be lower than
  * or equal to 2*255, thus we can always prevent any overflow by accepting
- * two less 255 steps. See Documentation/lzo.txt for more information.
+ * two less 255 steps. See Documentation/staging/lzo.rst for more information.
  */
 #define MAX_255_COUNT      ((((size_t)~0) / 255) - 2)
 
diff --git a/lib/xz/Kconfig b/lib/xz/Kconfig
index 22528743d4ce..5cb50245a878 100644
--- a/lib/xz/Kconfig
+++ b/lib/xz/Kconfig
@@ -5,7 +5,7 @@ config XZ_DEC
 	help
 	  LZMA2 compression algorithm and BCJ filters are supported using
 	  the .xz file format as the container. For integrity checking,
-	  CRC32 is supported. See Documentation/xz.txt for more information.
+	  CRC32 is supported. See Documentation/staging/xz.rst for more information.
 
 if XZ_DEC
 
diff --git a/samples/kprobes/kprobe_example.c b/samples/kprobes/kprobe_example.c
index d693c23a85e8..e53603de48b8 100644
--- a/samples/kprobes/kprobe_example.c
+++ b/samples/kprobes/kprobe_example.c
@@ -5,7 +5,7 @@
  * stack trace and selected registers when _do_fork() is called.
  *
  * For more information on theory of operation of kprobes, see
- * Documentation/kprobes.txt
+ * Documentation/staging/kprobes.rst
  *
  * You will see the trace data in /var/log/messages and on the console
  * whenever _do_fork() is invoked to create a new process.
diff --git a/samples/kprobes/kretprobe_example.c b/samples/kprobes/kretprobe_example.c
index 186315ca88b3..3685df980011 100644
--- a/samples/kprobes/kretprobe_example.c
+++ b/samples/kprobes/kretprobe_example.c
@@ -11,7 +11,7 @@
  * If no func_name is specified, _do_fork is instrumented
  *
  * For more information on theory of operation of kretprobes, see
- * Documentation/kprobes.txt
+ * Documentation/staging/kprobes.rst
  *
  * Build and insert the kernel module as done in the kprobe example.
  * You will see the trace data in /var/log/messages and on the console
-- 
2.25.4

[PATCH 13/14] docs: staging: don't use literalinclude

[Mauro Carvalho Chehab]

Such directive cause troubles with PDF output.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/staging/index.rst | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/staging/index.rst b/Documentation/staging/index.rst
index 8e98517675ca..8cc9d94b0a13 100644
--- a/Documentation/staging/index.rst
+++ b/Documentation/staging/index.rst
@@ -19,14 +19,17 @@ Unsorted Documentation
 Atomic Types
 ============
 
-.. literalinclude:: ../atomic_t.txt
+.. include:: ../atomic_t.txt
+   :literal:
 
 Atomic bitops
 =============
 
-.. literalinclude:: ../atomic_bitops.txt
+.. include:: ../atomic_bitops.txt
+   :literal:
 
 Memory Barriers
 ===============
 
-.. literalinclude:: ../memory-barriers.txt
+.. include:: ../memory-barriers.txt
+   :literal:
-- 
2.25.4

[PATCH 14/14] docs: staging: use small font for literal includes

[Mauro Carvalho Chehab]

The normal font is too big to display 80 columns, causing extra
breaks to be added at weird places.

change to the footnotesize, as this would fit a little bit
better.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/staging/index.rst | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/staging/index.rst b/Documentation/staging/index.rst
index 8cc9d94b0a13..184e6aece0a7 100644
--- a/Documentation/staging/index.rst
+++ b/Documentation/staging/index.rst
@@ -19,17 +19,41 @@ Unsorted Documentation
 Atomic Types
 ============
 
+.. raw:: latex
+
+    \footnotesize
+
 .. include:: ../atomic_t.txt
    :literal:
 
+.. raw:: latex
+
+    \normalsize
+
 Atomic bitops
 =============
 
+.. raw:: latex
+
+    \footnotesize
+
 .. include:: ../atomic_bitops.txt
    :literal:
 
+.. raw:: latex
+
+    \normalsize
+
 Memory Barriers
 ===============
 
+.. raw:: latex
+
+    \footnotesize
+
 .. include:: ../memory-barriers.txt
    :literal:
+
+.. raw:: latex
+
+    \normalsize
-- 
2.25.4

Re: [PATCH 04/14] docs: move IPMI.txt to the driver API book

[Corey Minyard]

On Fri, May 01, 2020 at 05:37:48PM +0200, Mauro Carvalho Chehab wrote:
> The IPMI is under drivers/char. This doc describes the kAPI
> part of the IPMI (mainly).
> 
> So, move it to the driver-api directory and add it to the
> corresponding index.rst file.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This is fine with me.

Acked-by: Corey Minyard <cminyard@mvista.com>

> ---
>  Documentation/driver-api/index.rst              | 1 +
>  Documentation/{IPMI.txt => driver-api/ipmi.rst} | 0
>  2 files changed, 1 insertion(+)
>  rename Documentation/{IPMI.txt => driver-api/ipmi.rst} (100%)
> 
> diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
> index dcc47c029f8e..6567187e7687 100644
> --- a/Documentation/driver-api/index.rst
> +++ b/Documentation/driver-api/index.rst
> @@ -39,6 +39,7 @@ available subsections can be seen below.
>     spi
>     i2c
>     ipmb
> +   ipmi
>     i3c/index
>     interconnect
>     devfreq
> diff --git a/Documentation/IPMI.txt b/Documentation/driver-api/ipmi.rst
> similarity index 100%
> rename from Documentation/IPMI.txt
> rename to Documentation/driver-api/ipmi.rst
> -- 
> 2.25.4
> 

Re: [PATCH 14/14] docs: staging: use small font for literal includes

[Joe Perches]

On Fri, 2020-05-01 at 17:37 +0200, Mauro Carvalho Chehab wrote:
> The normal font is too big to display 80 columns, causing extra
> breaks to be added at weird places.
> 
> change to the footnotesize, as this would fit a little bit
> better.
[]
> diff --git a/Documentation/staging/index.rst b/Documentation/staging/index.rst
[]
> @@ -19,17 +19,41 @@ Unsorted Documentation
>  Atomic Types
>  ============
>  
> +.. raw:: latex
> +
> +    \footnotesize

Please don't make the markup too invasive.

> +
>  .. include:: ../atomic_t.txt
>     :literal:
>  
> +.. raw:: latex
> +
> +    \normalsize
> +
>  Atomic bitops
>  =============
>  
> +.. raw:: latex
> +
> +    \footnotesize
> +
>  .. include:: ../atomic_bitops.txt
>     :literal:
>  
> +.. raw:: latex
> +
> +    \normalsize
> +
>  Memory Barriers
>  ===============
>  
> +.. raw:: latex
> +
> +    \footnotesize
> +
>  .. include:: ../memory-barriers.txt
>     :literal:
> +
> +.. raw:: latex
> +
> +    \normalsize

Re: [PATCH 07/14] docs: add IRQ documentation at the core-api book

[Mike Rapoport]

Hello Mauro,

On Fri, May 01, 2020 at 05:37:51PM +0200, Mauro Carvalho Chehab wrote:
> There are 4 IRQ documentation files under Documentation/*.txt.
> 
> Move them into a new directory (core-api/irq) and add a new
> index file for it.

Just curious, why IRQ docs got their subdirectory and DMA didn't :)

> While here, use a title markup for the Debugging section of the
> irq-domain.rst file.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/admin-guide/hw-vuln/l1tf.rst            |  2 +-
>  Documentation/admin-guide/kernel-per-CPU-kthreads.rst |  2 +-
>  Documentation/core-api/index.rst                      |  1 +
>  Documentation/{IRQ.txt => core-api/irq/concepts.rst}  |  0
>  Documentation/core-api/irq/index.rst                  | 11 +++++++++++
>  .../irq/irq-affinity.rst}                             |  0
>  .../{IRQ-domain.txt => core-api/irq/irq-domain.rst}   |  3 ++-
>  .../irq/irqflags-tracing.rst}                         |  0
>  Documentation/ia64/irq-redir.rst                      |  2 +-
>  Documentation/networking/scaling.rst                  |  4 ++--
>  Documentation/translations/zh_CN/IRQ.txt              |  4 ++--
>  MAINTAINERS                                           |  2 +-
>  12 files changed, 22 insertions(+), 9 deletions(-)
>  rename Documentation/{IRQ.txt => core-api/irq/concepts.rst} (100%)
>  create mode 100644 Documentation/core-api/irq/index.rst
>  rename Documentation/{IRQ-affinity.txt => core-api/irq/irq-affinity.rst} (100%)
>  rename Documentation/{IRQ-domain.txt => core-api/irq/irq-domain.rst} (99%)
>  rename Documentation/{irqflags-tracing.txt => core-api/irq/irqflags-tracing.rst} (100%)
> 
> diff --git a/Documentation/admin-guide/hw-vuln/l1tf.rst b/Documentation/admin-guide/hw-vuln/l1tf.rst
> index f83212fae4d5..3eeeb488d955 100644
> --- a/Documentation/admin-guide/hw-vuln/l1tf.rst
> +++ b/Documentation/admin-guide/hw-vuln/l1tf.rst
> @@ -268,7 +268,7 @@ Guest mitigation mechanisms
>     /proc/irq/$NR/smp_affinity[_list] files. Limited documentation is
>     available at:
>  
> -   https://www.kernel.org/doc/Documentation/IRQ-affinity.txt
> +   https://www.kernel.org/doc/Documentation/core-api/irq/irq-affinity.rst
>  
>  .. _smt_control:
>  
> diff --git a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
> index 21818aca4708..dc36aeb65d0a 100644
> --- a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
> +++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
> @@ -10,7 +10,7 @@ them to a "housekeeping" CPU dedicated to such work.
>  References
>  ==========
>  
> --	Documentation/IRQ-affinity.txt:  Binding interrupts to sets of CPUs.
> +-	Documentation/core-api/irq/irq-affinity.rst:  Binding interrupts to sets of CPUs.
>  
>  -	Documentation/admin-guide/cgroup-v1:  Using cgroups to bind tasks to sets of CPUs.
>  
> diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
> index ab056b3626f4..49a885e83a55 100644
> --- a/Documentation/core-api/index.rst
> +++ b/Documentation/core-api/index.rst
> @@ -52,6 +52,7 @@ How Linux keeps everything from happening at the same time.  See
>  
>     atomic_ops
>     refcount-vs-atomic
> +   irq/index
>     local_ops
>     padata
>     ../RCU/index
> diff --git a/Documentation/IRQ.txt b/Documentation/core-api/irq/concepts.rst
> similarity index 100%
> rename from Documentation/IRQ.txt
> rename to Documentation/core-api/irq/concepts.rst
> diff --git a/Documentation/core-api/irq/index.rst b/Documentation/core-api/irq/index.rst
> new file mode 100644
> index 000000000000..0d65d11e5420
> --- /dev/null
> +++ b/Documentation/core-api/irq/index.rst
> @@ -0,0 +1,11 @@
> +====
> +IRQs
> +====
> +
> +.. toctree::
> +   :maxdepth: 1
> +
> +   concepts
> +   irq-affinity
> +   irq-domain
> +   irqflags-tracing
> diff --git a/Documentation/IRQ-affinity.txt b/Documentation/core-api/irq/irq-affinity.rst
> similarity index 100%
> rename from Documentation/IRQ-affinity.txt
> rename to Documentation/core-api/irq/irq-affinity.rst
> diff --git a/Documentation/IRQ-domain.txt b/Documentation/core-api/irq/irq-domain.rst
> similarity index 99%
> rename from Documentation/IRQ-domain.txt
> rename to Documentation/core-api/irq/irq-domain.rst
> index 507775cce753..096db12f32d5 100644
> --- a/Documentation/IRQ-domain.txt
> +++ b/Documentation/core-api/irq/irq-domain.rst
> @@ -263,7 +263,8 @@ needs to:
>  Hierarchy irq_domain is in no way x86 specific, and is heavily used to
>  support other architectures, such as ARM, ARM64 etc.
>  
> -=== Debugging ===
> +Debugging
> +=========
>  
>  Most of the internals of the IRQ subsystem are exposed in debugfs by
>  turning CONFIG_GENERIC_IRQ_DEBUGFS on.
> diff --git a/Documentation/irqflags-tracing.txt b/Documentation/core-api/irq/irqflags-tracing.rst
> similarity index 100%
> rename from Documentation/irqflags-tracing.txt
> rename to Documentation/core-api/irq/irqflags-tracing.rst
> diff --git a/Documentation/ia64/irq-redir.rst b/Documentation/ia64/irq-redir.rst
> index 39bf94484a15..6bbbbe4f73ef 100644
> --- a/Documentation/ia64/irq-redir.rst
> +++ b/Documentation/ia64/irq-redir.rst
> @@ -7,7 +7,7 @@ IRQ affinity on IA64 platforms
>  
>  By writing to /proc/irq/IRQ#/smp_affinity the interrupt routing can be
>  controlled. The behavior on IA64 platforms is slightly different from
> -that described in Documentation/IRQ-affinity.txt for i386 systems.
> +that described in Documentation/core-api/irq/irq-affinity.rst for i386 systems.
>  
>  Because of the usage of SAPIC mode and physical destination mode the
>  IRQ target is one particular CPU and cannot be a mask of several
> diff --git a/Documentation/networking/scaling.rst b/Documentation/networking/scaling.rst
> index f78d7bf27ff5..8f0347b9fb3d 100644
> --- a/Documentation/networking/scaling.rst
> +++ b/Documentation/networking/scaling.rst
> @@ -81,7 +81,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default,
>  an IRQ may be handled on any CPU. Because a non-negligible part of packet
>  processing takes place in receive interrupt handling, it is advantageous
>  to spread receive interrupts between CPUs. To manually adjust the IRQ
> -affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems
> +affinity of each interrupt see Documentation/core-api/irq/irq-affinity.rst. Some systems
>  will be running irqbalance, a daemon that dynamically optimizes IRQ
>  assignments and as a result may override any manual settings.
>  
> @@ -160,7 +160,7 @@ can be configured for each receive queue using a sysfs file entry::
>  
>  This file implements a bitmap of CPUs. RPS is disabled when it is zero
>  (the default), in which case packets are processed on the interrupting
> -CPU. Documentation/IRQ-affinity.txt explains how CPUs are assigned to
> +CPU. Documentation/core-api/irq/irq-affinity.rst explains how CPUs are assigned to
>  the bitmap.
>  
>  
> diff --git a/Documentation/translations/zh_CN/IRQ.txt b/Documentation/translations/zh_CN/IRQ.txt
> index 956026d5cf82..9aec8dca4fcf 100644
> --- a/Documentation/translations/zh_CN/IRQ.txt
> +++ b/Documentation/translations/zh_CN/IRQ.txt
> @@ -1,4 +1,4 @@
> -Chinese translated version of Documentation/IRQ.txt
> +Chinese translated version of Documentation/core-api/irq/index.rst
>  
>  If you have any comment or update to the content, please contact the
>  original document maintainer directly.  However, if you have a problem
> @@ -9,7 +9,7 @@ or if there is a problem with the translation.
>  Maintainer: Eric W. Biederman <ebiederman@xmission.com>
>  Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
>  ---------------------------------------------------------------------
> -Documentation/IRQ.txt 的中文翻译
> +Documentation/core-api/irq/index.rst 的中文翻译
>  
>  如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
>  交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a1d7af532950..6eb3d85a646f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8974,7 +8974,7 @@ IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
>  M:	Marc Zyngier <maz@kernel.org>
>  S:	Maintained
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
> -F:	Documentation/IRQ-domain.txt
> +F:	Documentation/core-api/irq/irq-domain.rst
>  F:	include/linux/irqdomain.h
>  F:	kernel/irq/irqdomain.c
>  F:	kernel/irq/msi.c
> -- 
> 2.25.4
> 

-- 
Sincerely yours,
Mike.

Re: [PATCH 11/14] docs: move other kAPI documents to core-api

[Mike Rapoport]

Hello Mauro,

On Fri, May 01, 2020 at 05:37:55PM +0200, Mauro Carvalho Chehab wrote:
> There are a number of random documents that seem to be
> describing some aspects of the core-api. Move them to such
> directory, adding them at the core-api/index.rst file.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/admin-guide/sysctl/vm.rst                     | 2 +-
>  Documentation/core-api/index.rst                            | 6 ++++++
>  Documentation/{mailbox.txt => core-api/mailbox.rst}         | 0
>  Documentation/{nommu-mmap.txt => core-api/nommu-mmap.rst}   | 0

The nommu-mmap mostly provides description of user visible behaviuour. I
think it's bettter to have it in admin-guide/mm/.

>  .../{this_cpu_ops.txt => core-api/this_cpu_ops.rst}         | 0
>  .../unaligned-memory-access.rst}                            | 0
>  Documentation/gpu/drm-mm.rst                                | 2 +-
>  arch/Kconfig                                                | 2 +-
>  init/Kconfig                                                | 2 +-
>  mm/Kconfig                                                  | 2 +-
>  mm/nommu.c                                                  | 2 +-
>  11 files changed, 12 insertions(+), 6 deletions(-)
>  rename Documentation/{mailbox.txt => core-api/mailbox.rst} (100%)
>  rename Documentation/{nommu-mmap.txt => core-api/nommu-mmap.rst} (100%)
>  rename Documentation/{this_cpu_ops.txt => core-api/this_cpu_ops.rst} (100%)
>  rename Documentation/{unaligned-memory-access.txt => core-api/unaligned-memory-access.rst} (100%)
> 
> diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst
> index 0329a4d3fa9e..0bf2f2a84a9f 100644
> --- a/Documentation/admin-guide/sysctl/vm.rst
> +++ b/Documentation/admin-guide/sysctl/vm.rst
> @@ -583,7 +583,7 @@ trimming of allocations is initiated.
>  
>  The default value is 1.
>  
> -See Documentation/nommu-mmap.txt for more information.
> +See Documentation/core-api/nommu-mmap.rst for more information.
>  
>  
>  numa_zonelist_order
> diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
> index eeac63ba17c3..fe03a639a91a 100644
> --- a/Documentation/core-api/index.rst
> +++ b/Documentation/core-api/index.rst
> @@ -38,10 +38,14 @@ Library functionality that is used throughout the kernel.
>     circular-buffers
>     rbtree
>     generic-radix-tree
> +   mailbox
>     packing
> +   rbtree
> +   this_cpu_ops
>     timekeeping
>     errseq
>  
> +
>  Concurrency primitives
>  ======================
>  
> @@ -82,11 +86,13 @@ more memory-management documentation in :doc:`/vm/index`.
>     :maxdepth: 1
>  
>     memory-allocation
> +   unaligned-memory-access
>     dma-api
>     dma-api-howto
>     dma-attributes
>     dma-isa-lpc
>     bus-virt-phys-mapping
> +   nommu-mmap
>     mm-api
>     genalloc
>     pin_user_pages
> diff --git a/Documentation/mailbox.txt b/Documentation/core-api/mailbox.rst
> similarity index 100%
> rename from Documentation/mailbox.txt
> rename to Documentation/core-api/mailbox.rst
> diff --git a/Documentation/nommu-mmap.txt b/Documentation/core-api/nommu-mmap.rst
> similarity index 100%
> rename from Documentation/nommu-mmap.txt
> rename to Documentation/core-api/nommu-mmap.rst
> diff --git a/Documentation/this_cpu_ops.txt b/Documentation/core-api/this_cpu_ops.rst
> similarity index 100%
> rename from Documentation/this_cpu_ops.txt
> rename to Documentation/core-api/this_cpu_ops.rst
> diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/core-api/unaligned-memory-access.rst
> similarity index 100%
> rename from Documentation/unaligned-memory-access.txt
> rename to Documentation/core-api/unaligned-memory-access.rst
> diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst
> index 1839762044be..e0bbcbb6f512 100644
> --- a/Documentation/gpu/drm-mm.rst
> +++ b/Documentation/gpu/drm-mm.rst
> @@ -314,7 +314,7 @@ To use drm_gem_cma_get_unmapped_area(), drivers must fill the struct
>  a pointer on drm_gem_cma_get_unmapped_area().
>  
>  More detailed information about get_unmapped_area can be found in
> -Documentation/nommu-mmap.txt
> +Documentation/core-api/nommu-mmap.rst
>  
>  Memory Coherency
>  ----------------
> diff --git a/arch/Kconfig b/arch/Kconfig
> index 786a85d4ad40..b0b4046c9d13 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -147,7 +147,7 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
>  	  problems with received packets if doing so would not help
>  	  much.
>  
> -	  See Documentation/unaligned-memory-access.txt for more
> +	  See Documentation/core-api/unaligned-memory-access.rst for more
>  	  information on the topic of unaligned memory accesses.
>  
>  config ARCH_USE_BUILTIN_BSWAP
> diff --git a/init/Kconfig b/init/Kconfig
> index 492bb7000aa4..61ccfd9243e3 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1950,7 +1950,7 @@ config MMAP_ALLOW_UNINITIALIZED
>  	  userspace.  Since that isn't generally a problem on no-MMU systems,
>  	  it is normally safe to say Y here.
>  
> -	  See Documentation/nommu-mmap.txt for more information.
> +	  See Documentation/core-api/nommu-mmap.rst for more information.
>  
>  config SYSTEM_DATA_VERIFICATION
>  	def_bool n
> diff --git a/mm/Kconfig b/mm/Kconfig
> index db626b8d4fdb..2a133c40a4b7 100644
> --- a/mm/Kconfig
> +++ b/mm/Kconfig
> @@ -382,7 +382,7 @@ config NOMMU_INITIAL_TRIM_EXCESS
>  	  This option specifies the initial value of this option.  The default
>  	  of 1 says that all excess pages should be trimmed.
>  
> -	  See Documentation/nommu-mmap.txt for more information.
> +	  See Documentation/core-api/nommu-mmap.rst for more information.
>  
>  config TRANSPARENT_HUGEPAGE
>  	bool "Transparent Hugepage Support"
> diff --git a/mm/nommu.c b/mm/nommu.c
> index 371697bf372d..e3e707d6f124 100644
> --- a/mm/nommu.c
> +++ b/mm/nommu.c
> @@ -5,7 +5,7 @@
>   *  Replacement code for mm functions to support CPU's that don't
>   *  have any form of memory management unit (thus no virtual memory).
>   *
> - *  See Documentation/nommu-mmap.txt
> + *  See Documentation/core-api/nommu-mmap.rst
>   *
>   *  Copyright (c) 2004-2008 David Howells <dhowells@redhat.com>
>   *  Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com>
> -- 
> 2.25.4
> 

-- 
Sincerely yours,
Mike.

Re: [PATCH 07/14] docs: add IRQ documentation at the core-api book

[Mauro Carvalho Chehab]

Em Sat, 2 May 2020 10:41:33 +0300
Mike Rapoport <rppt@linux.ibm.com> escreveu:

> Hello Mauro,
> 
> On Fri, May 01, 2020 at 05:37:51PM +0200, Mauro Carvalho Chehab wrote:
> > There are 4 IRQ documentation files under Documentation/*.txt.
> > 
> > Move them into a new directory (core-api/irq) and add a new
> > index file for it.  
> 
> Just curious, why IRQ docs got their subdirectory and DMA didn't :)

Heh, you got me... :-)

The rationale I used is that DMA fits nicely being close to other 
memory related documents.  As those currently don't have a subdir,
I opted to not create a DMA-specific dir. I admit that his is a
weak reason. I wouldn't mind placing them on a separate subdir,
if you think it would be worth.

Thanks,
Mauro

Re: [PATCH 14/14] docs: staging: use small font for literal includes

[Mauro Carvalho Chehab]

Em Fri, 01 May 2020 17:10:00 -0700
Joe Perches <joe@perches.com> escreveu:

> On Fri, 2020-05-01 at 17:37 +0200, Mauro Carvalho Chehab wrote:
> > The normal font is too big to display 80 columns, causing extra
> > breaks to be added at weird places.
> > 
> > change to the footnotesize, as this would fit a little bit
> > better.  
> []
> > diff --git a/Documentation/staging/index.rst b/Documentation/staging/index.rst  
> []
> > @@ -19,17 +19,41 @@ Unsorted Documentation
> >  Atomic Types
> >  ============
> >  
> > +.. raw:: latex
> > +
> > +    \footnotesize  
> 
> Please don't make the markup too invasive.

With the current status, this is unavoidable.

The only way to avoid those would be to convert the document itself
to ReST, but the document writer was not convinced yet to even minimal
ReST markups on 3 files.

The problem with a text file is that the lines produced at the PDF output 
with a mono-spaced font, on LaTeX have lot less than 80 colums. So, 
some markups should tell Sphinx to use a reduced font for those includes.

However, there's no "fontsize" directive (nor any other directive that 
would allow adjusting font parameters on an included file) on Sphinx. 
So, we need to use the above.

Thanks,
Mauro

Re: [PATCH 07/14] docs: add IRQ documentation at the core-api book

[Mike Rapoport]

On Sat, May 02, 2020 at 12:16:41PM +0200, Mauro Carvalho Chehab wrote:
> Em Sat, 2 May 2020 10:41:33 +0300
> Mike Rapoport <rppt@linux.ibm.com> escreveu:
> 
> > Hello Mauro,
> > 
> > On Fri, May 01, 2020 at 05:37:51PM +0200, Mauro Carvalho Chehab wrote:
> > > There are 4 IRQ documentation files under Documentation/*.txt.
> > > 
> > > Move them into a new directory (core-api/irq) and add a new
> > > index file for it.  
> > 
> > Just curious, why IRQ docs got their subdirectory and DMA didn't :)
> 
> Heh, you got me... :-)
> 
> The rationale I used is that DMA fits nicely being close to other 
> memory related documents.  As those currently don't have a subdir,
> I opted to not create a DMA-specific dir. I admit that his is a
> weak reason. I wouldn't mind placing them on a separate subdir,
> if you think it would be worth.

I'm Ok without a dir as well :)

> Thanks,
> Mauro

-- 
Sincerely yours,
Mike.

Re: [PATCH 12/14] docs: move remaining stuff under Documentation/*.txt to Documentation/staging

[Masami Hiramatsu]

On Fri,  1 May 2020 17:37:56 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> There are several files that I was unable to find a proper place
> for them, and 3 ones that are still in plain old text format.
> 
> Let's place those stuff behind the carpet, as we'd like to keep the
> root directory clean.
> 
> We can later discuss and move those into better places.

Hi Mauro,

Thanks for cleaning it up! Tentatively moving kprobes.txt under
staging/ is good to me.

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>

BTW, I think kprobes.txt is under trace/ or we may be better
making a new core-api/events/ directory and prepare other event
systems (PMU, uprobes, and hw_breakpoint.) 

Thank you,
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/index.rst                       | 13 ++++++++
>  .../{crc32.txt => staging/crc32.rst}          |  0
>  Documentation/staging/index.rst               | 32 +++++++++++++++++++
>  .../{kprobes.txt => staging/kprobes.rst}      |  0
>  Documentation/{lzo.txt => staging/lzo.rst}    |  0
>  .../remoteproc.rst}                           |  2 +-
>  .../{rpmsg.txt => staging/rpmsg.rst}          |  0
>  .../speculation.rst}                          |  8 +++--
>  .../static-keys.rst}                          |  0
>  Documentation/{tee.txt => staging/tee.rst}    |  1 +
>  Documentation/{xz.txt => staging/xz.rst}      |  0
>  Documentation/trace/kprobetrace.rst           |  2 +-
>  MAINTAINERS                                   | 10 +++---
>  include/asm-generic/bitops/atomic.h           |  2 +-
>  include/linux/jump_label.h                    |  2 +-
>  lib/crc32.c                                   |  2 +-
>  lib/lzo/lzo1x_decompress_safe.c               |  2 +-
>  lib/xz/Kconfig                                |  2 +-
>  samples/kprobes/kprobe_example.c              |  2 +-
>  samples/kprobes/kretprobe_example.c           |  2 +-
>  20 files changed, 65 insertions(+), 17 deletions(-)
>  rename Documentation/{crc32.txt => staging/crc32.rst} (100%)
>  create mode 100644 Documentation/staging/index.rst
>  rename Documentation/{kprobes.txt => staging/kprobes.rst} (100%)
>  rename Documentation/{lzo.txt => staging/lzo.rst} (100%)
>  rename Documentation/{remoteproc.txt => staging/remoteproc.rst} (99%)
>  rename Documentation/{rpmsg.txt => staging/rpmsg.rst} (100%)
>  rename Documentation/{speculation.txt => staging/speculation.rst} (97%)
>  rename Documentation/{static-keys.txt => staging/static-keys.rst} (100%)
>  rename Documentation/{tee.txt => staging/tee.rst} (99%)
>  rename Documentation/{xz.txt => staging/xz.rst} (100%)
> 
> diff --git a/Documentation/index.rst b/Documentation/index.rst
> index af2b87afebc8..9a931e157db2 100644
> --- a/Documentation/index.rst
> +++ b/Documentation/index.rst
> @@ -179,6 +179,19 @@ subprojects.
>  
>     filesystems/ext4/index
>  
> +Other documentation
> +-------------------
> +
> +There are several unsorted documents that don't seem to fit on other parts
> +of the documentation body, or may require some adjustments and/or conversion
> +to ReStructured Text format, or are simply too old.
> +
> +.. toctree::
> +   :maxdepth: 2
> +
> +   staging/index
> +
> +
>  Translations
>  ------------
>  
> diff --git a/Documentation/crc32.txt b/Documentation/staging/crc32.rst
> similarity index 100%
> rename from Documentation/crc32.txt
> rename to Documentation/staging/crc32.rst
> diff --git a/Documentation/staging/index.rst b/Documentation/staging/index.rst
> new file mode 100644
> index 000000000000..8e98517675ca
> --- /dev/null
> +++ b/Documentation/staging/index.rst
> @@ -0,0 +1,32 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Unsorted Documentation
> +======================
> +
> +.. toctree::
> +   :maxdepth: 2
> +
> +   crc32
> +   kprobes
> +   lzo
> +   remoteproc
> +   rpmsg
> +   speculation
> +   static-keys
> +   tee
> +   xz
> +
> +Atomic Types
> +============
> +
> +.. literalinclude:: ../atomic_t.txt
> +
> +Atomic bitops
> +=============
> +
> +.. literalinclude:: ../atomic_bitops.txt
> +
> +Memory Barriers
> +===============
> +
> +.. literalinclude:: ../memory-barriers.txt
> diff --git a/Documentation/kprobes.txt b/Documentation/staging/kprobes.rst
> similarity index 100%
> rename from Documentation/kprobes.txt
> rename to Documentation/staging/kprobes.rst
> diff --git a/Documentation/lzo.txt b/Documentation/staging/lzo.rst
> similarity index 100%
> rename from Documentation/lzo.txt
> rename to Documentation/staging/lzo.rst
> diff --git a/Documentation/remoteproc.txt b/Documentation/staging/remoteproc.rst
> similarity index 99%
> rename from Documentation/remoteproc.txt
> rename to Documentation/staging/remoteproc.rst
> index 2be1147256e0..9cccd3dd6a4b 100644
> --- a/Documentation/remoteproc.txt
> +++ b/Documentation/staging/remoteproc.rst
> @@ -22,7 +22,7 @@ for remote processors that supports this kind of communication. This way,
>  platform-specific remoteproc drivers only need to provide a few low-level
>  handlers, and then all rpmsg drivers will then just work
>  (for more information about the virtio-based rpmsg bus and its drivers,
> -please read Documentation/rpmsg.txt).
> +please read Documentation/staging/rpmsg.rst).
>  Registration of other types of virtio devices is now also possible. Firmwares
>  just need to publish what kind of virtio devices do they support, and then
>  remoteproc will add those devices. This makes it possible to reuse the
> diff --git a/Documentation/rpmsg.txt b/Documentation/staging/rpmsg.rst
> similarity index 100%
> rename from Documentation/rpmsg.txt
> rename to Documentation/staging/rpmsg.rst
> diff --git a/Documentation/speculation.txt b/Documentation/staging/speculation.rst
> similarity index 97%
> rename from Documentation/speculation.txt
> rename to Documentation/staging/speculation.rst
> index 50d7ea857cff..8045d99bcf12 100644
> --- a/Documentation/speculation.txt
> +++ b/Documentation/staging/speculation.rst
> @@ -1,9 +1,11 @@
> +===========
> +Speculation
> +===========
> +
>  This document explains potential effects of speculation, and how undesirable
>  effects can be mitigated portably using common APIs.
>  
> -===========
> -Speculation
> -===========
> +------------------------------------------------------------------------------
>  
>  To improve performance and minimize average latencies, many contemporary CPUs
>  employ speculative execution techniques such as branch prediction, performing
> diff --git a/Documentation/static-keys.txt b/Documentation/staging/static-keys.rst
> similarity index 100%
> rename from Documentation/static-keys.txt
> rename to Documentation/staging/static-keys.rst
> diff --git a/Documentation/tee.txt b/Documentation/staging/tee.rst
> similarity index 99%
> rename from Documentation/tee.txt
> rename to Documentation/staging/tee.rst
> index c8fad81c4563..324604a15d17 100644
> --- a/Documentation/tee.txt
> +++ b/Documentation/staging/tee.rst
> @@ -162,6 +162,7 @@ The AMD-TEE driver packages the command buffer payload for processing in TEE.
>  The command buffer format for the different TEE commands can be found in [7].
>  
>  The TEE commands supported by AMD-TEE Trusted OS are:
> +
>  * TEE_CMD_ID_LOAD_TA          - loads a Trusted Application (TA) binary into
>                                  TEE environment.
>  * TEE_CMD_ID_UNLOAD_TA        - unloads TA binary from TEE environment.
> diff --git a/Documentation/xz.txt b/Documentation/staging/xz.rst
> similarity index 100%
> rename from Documentation/xz.txt
> rename to Documentation/staging/xz.rst
> diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst
> index cc4c5fc313df..c1709165c553 100644
> --- a/Documentation/trace/kprobetrace.rst
> +++ b/Documentation/trace/kprobetrace.rst
> @@ -40,7 +40,7 @@ Synopsis of kprobe_events
>   MEMADDR	: Address where the probe is inserted.
>   MAXACTIVE	: Maximum number of instances of the specified function that
>  		  can be probed simultaneously, or 0 for the default value
> -		  as defined in Documentation/kprobes.txt section 1.3.1.
> +		  as defined in Documentation/staging/kprobes.rst section 1.3.1.
>  
>   FETCHARGS	: Arguments. Each probe can have up to 128 args.
>    %REG		: Fetch register REG
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1aa6e89e7424..8aa8f7c0db93 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9494,7 +9494,7 @@ M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
>  M:	"David S. Miller" <davem@davemloft.net>
>  M:	Masami Hiramatsu <mhiramat@kernel.org>
>  S:	Maintained
> -F:	Documentation/kprobes.txt
> +F:	Documentation/staging/kprobes.rst
>  F:	include/asm-generic/kprobes.h
>  F:	include/linux/kprobes.h
>  F:	kernel/kprobes.c
> @@ -9855,7 +9855,7 @@ L:	linux-kernel@vger.kernel.org
>  L:	linux-arch@vger.kernel.org
>  S:	Supported
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
> -F:	Documentation/atomic_bitops.txt
> +F:	Documentation/staging/atomic_bitops.txt
>  F:	Documentation/atomic_t.txt
>  F:	Documentation/core-api/atomic_ops.rst
>  F:	Documentation/core-api/refcount-vs-atomic.rst
> @@ -14357,7 +14357,7 @@ S:	Maintained
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git rproc-next
>  F:	Documentation/ABI/testing/sysfs-class-remoteproc
>  F:	Documentation/devicetree/bindings/remoteproc/
> -F:	Documentation/remoteproc.txt
> +F:	Documentation/staging/remoteproc.rst
>  F:	drivers/remoteproc/
>  F:	include/linux/remoteproc.h
>  F:	include/linux/remoteproc/
> @@ -14369,7 +14369,7 @@ L:	linux-remoteproc@vger.kernel.org
>  S:	Maintained
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc.git rpmsg-next
>  F:	Documentation/ABI/testing/sysfs-bus-rpmsg
> -F:	Documentation/rpmsg.txt
> +F:	Documentation/staging/rpmsg.rst
>  F:	drivers/rpmsg/
>  F:	include/linux/rpmsg.h
>  F:	include/linux/rpmsg/
> @@ -16580,7 +16580,7 @@ TEE SUBSYSTEM
>  M:	Jens Wiklander <jens.wiklander@linaro.org>
>  L:	tee-dev@lists.linaro.org
>  S:	Maintained
> -F:	Documentation/tee.txt
> +F:	Documentation/staging/tee.rst
>  F:	drivers/tee/
>  F:	include/linux/tee_drv.h
>  F:	include/uapi/linux/tee.h
> diff --git a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h
> index dd90c9792909..edeeb8375006 100644
> --- a/include/asm-generic/bitops/atomic.h
> +++ b/include/asm-generic/bitops/atomic.h
> @@ -8,7 +8,7 @@
>  
>  /*
>   * Implementation of atomic bitops using atomic-fetch ops.
> - * See Documentation/atomic_bitops.txt for details.
> + * See Documentation/staging/atomic_bitops.txt for details.
>   */
>  
>  static inline void set_bit(unsigned int nr, volatile unsigned long *p)
> diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h
> index 3526c0aee954..32809624d422 100644
> --- a/include/linux/jump_label.h
> +++ b/include/linux/jump_label.h
> @@ -68,7 +68,7 @@
>   * Lacking toolchain and or architecture support, static keys fall back to a
>   * simple conditional branch.
>   *
> - * Additional babbling in: Documentation/static-keys.txt
> + * Additional babbling in: Documentation/staging/static-keys.rst
>   */
>  
>  #ifndef __ASSEMBLY__
> diff --git a/lib/crc32.c b/lib/crc32.c
> index 4a20455d1f61..35a03d03f973 100644
> --- a/lib/crc32.c
> +++ b/lib/crc32.c
> @@ -24,7 +24,7 @@
>   * Version 2.  See the file COPYING for more details.
>   */
>  
> -/* see: Documentation/crc32.txt for a description of algorithms */
> +/* see: Documentation/staging/crc32.rst for a description of algorithms */
>  
>  #include <linux/crc32.h>
>  #include <linux/crc32poly.h>
> diff --git a/lib/lzo/lzo1x_decompress_safe.c b/lib/lzo/lzo1x_decompress_safe.c
> index 2717c7963acd..7892a40cf765 100644
> --- a/lib/lzo/lzo1x_decompress_safe.c
> +++ b/lib/lzo/lzo1x_decompress_safe.c
> @@ -32,7 +32,7 @@
>   * depending on the base count. Since the base count is taken from a u8
>   * and a few bits, it is safe to assume that it will always be lower than
>   * or equal to 2*255, thus we can always prevent any overflow by accepting
> - * two less 255 steps. See Documentation/lzo.txt for more information.
> + * two less 255 steps. See Documentation/staging/lzo.rst for more information.
>   */
>  #define MAX_255_COUNT      ((((size_t)~0) / 255) - 2)
>  
> diff --git a/lib/xz/Kconfig b/lib/xz/Kconfig
> index 22528743d4ce..5cb50245a878 100644
> --- a/lib/xz/Kconfig
> +++ b/lib/xz/Kconfig
> @@ -5,7 +5,7 @@ config XZ_DEC
>  	help
>  	  LZMA2 compression algorithm and BCJ filters are supported using
>  	  the .xz file format as the container. For integrity checking,
> -	  CRC32 is supported. See Documentation/xz.txt for more information.
> +	  CRC32 is supported. See Documentation/staging/xz.rst for more information.
>  
>  if XZ_DEC
>  
> diff --git a/samples/kprobes/kprobe_example.c b/samples/kprobes/kprobe_example.c
> index d693c23a85e8..e53603de48b8 100644
> --- a/samples/kprobes/kprobe_example.c
> +++ b/samples/kprobes/kprobe_example.c
> @@ -5,7 +5,7 @@
>   * stack trace and selected registers when _do_fork() is called.
>   *
>   * For more information on theory of operation of kprobes, see
> - * Documentation/kprobes.txt
> + * Documentation/staging/kprobes.rst
>   *
>   * You will see the trace data in /var/log/messages and on the console
>   * whenever _do_fork() is invoked to create a new process.
> diff --git a/samples/kprobes/kretprobe_example.c b/samples/kprobes/kretprobe_example.c
> index 186315ca88b3..3685df980011 100644
> --- a/samples/kprobes/kretprobe_example.c
> +++ b/samples/kprobes/kretprobe_example.c
> @@ -11,7 +11,7 @@
>   * If no func_name is specified, _do_fork is instrumented
>   *
>   * For more information on theory of operation of kretprobes, see
> - * Documentation/kprobes.txt
> + * Documentation/staging/kprobes.rst
>   *
>   * Build and insert the kernel module as done in the kprobe example.
>   * You will see the trace data in /var/log/messages and on the console
> -- 
> 2.25.4
> 


-- 
Masami Hiramatsu <mhiramat@kernel.org>

Re: [PATCH 12/14] docs: move remaining stuff under Documentation/*.txt to Documentation/staging

[Joe Perches]

On Mon, 2020-05-04 at 08:54 +0900, Masami Hiramatsu wrote:
> On Fri,  1 May 2020 17:37:56 +0200
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
[]
> > diff --git a/MAINTAINERS b/MAINTAINERS
[]
> > @@ -9855,7 +9855,7 @@ L:	linux-kernel@vger.kernel.org
> >  L:	linux-arch@vger.kernel.org
> >  S:	Supported
> >  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
> > -F:	Documentation/atomic_bitops.txt
> > +F:	Documentation/staging/atomic_bitops.txt

Can you please keep the file lists in alphabetic order
and move this entry down appropriately?  Thanks.

> >  F:	Documentation/atomic_t.txt
> >  F:	Documentation/core-api/atomic_ops.rst
> >  F:	Documentation/core-api/refcount-vs-atomic.rst

Re: [PATCH 00/14] Move the ReST files from Documentation/*.txt

[Akira Yokosawa]

(CC to documentation, get_maintainer, and LKMM maintainers)

Hi Mauro,

As I didn't receive "[PATCH 12/14] docs: move remaining stuff under
Documentation/*.txt to Documentation/staging", I'm replying to
[PATCH 00/14].

On Fri, 1 May 2020 17:37:44 +0200, Mauro Carvalho Chehab wrote:
> The main goal of this series is to cleanup the Documentation/
> directory.
> 
> Most of the files under Documentation/*.txt are already in ReST format.
> They just need to be moved to some place. So, most of the work here is
> to just move files for them to generate an output using the docs building
> system.
> 
> After this change, the  Documentation/ dir will contain:
> 
> - the main ReST file:
> 	- index.rst
> 
> - TUX and its copyright:
> 	- logo.gif and COPYING-logo
> 
> - Files required to do ReST builds:
> 	- .gitignore, Makefile,  conf.py,  docutils.conf,  Kconfig
> 
> - A pre-git file used to generate patches:
> 	- dontdiff
>   (I guess we should get rid of it, as I doubt this is useful those days).
> 
> -
> 
> Besides the above rightful files, the Documentation/ dir will also
> contain some left-overs:
> 
> - two somewhat new ReST files that should be moved to somewhere:
> 	- asm-annotations.rst and watch_queue.rst
> 
> - Two files that helps people looking for some well known documents
>   that are referenced at the web, pointing to their new location inside
>   the process/ dir:
> 	- SubmittingPatches and CodingStyle
> 
> - Three .txt files that weren't converted to ReST:
> 	- atomic_bitops.txt, memory-barriers.txt, atomic_t.txt
> 
> It should be noticed that I'm in doubt about the location of some files,
> and some stuff may well belong to a trash can. So, this series create
> a temporary place for orphaned documents in the form of a
> Documentation/staging directory.
> 
> This series is also on my development git tree, at:
> 
> 	https://git.linuxtv.org/mchehab/experimental.git/log/?h=rename-main-docs
> 
> The built output documentation on html format is at:
> 
> 	https://www.infradead.org/~mchehab/kernel_docs/
> 
> (it contains also other documents I converted to ReST)
> 
> 
> Mauro Carvalho Chehab (14):
>   docs: move DMA kAPI to Documentation/core-api
>   docs: add bus-virt-phys-mapping.txt to core-api
>   docs: fix references for DMA*.txt files
>   docs: move IPMI.txt to the driver API book
>   docs: fix references for ipmi.rst file
>   docs: debugging-via-ohci1394.txt: add it to the core-api book
>   docs: add IRQ documentation at the core-api book
>   docs: move kobject and kref docs into the core-api book
>   docs: move digsig docs to the security book
>   docs: move locking-specific documenta to locking/ directory
>   docs: move other kAPI documents to core-api
>   docs: move remaining stuff under Documentation/*.txt to
>     Documentation/staging
>   docs: staging: don't use literalinclude
>   docs: staging: use small font for literal includes
> 
>  Documentation/PCI/pci.rst                     |  6 +-
>  Documentation/admin-guide/hw-vuln/l1tf.rst    |  2 +-
>  .../admin-guide/kernel-parameters.txt         |  2 +-
>  .../admin-guide/kernel-per-CPU-kthreads.rst   |  2 +-
>  Documentation/admin-guide/sysctl/vm.rst       |  2 +-
>  Documentation/block/biodoc.rst                |  2 +-
>  .../bus-virt-phys-mapping.rst}                |  2 +-
>  .../debugging-via-ohci1394.rst}               |  0
>  .../dma-api-howto.rst}                        |  0
>  .../{DMA-API.txt => core-api/dma-api.rst}     |  6 +-
>  .../dma-attributes.rst}                       |  0
>  .../dma-isa-lpc.rst}                          |  2 +-
>  Documentation/core-api/index.rst              | 14 +++++
>  .../{IRQ.txt => core-api/irq/concepts.rst}    |  0
>  Documentation/core-api/irq/index.rst          | 11 ++++
>  .../irq/irq-affinity.rst}                     |  0
>  .../irq/irq-domain.rst}                       |  3 +-
>  .../irq/irqflags-tracing.rst}                 |  0
>  Documentation/core-api/kobject.rst            |  2 +-
>  Documentation/{kref.txt => core-api/kref.rst} |  0
>  .../{mailbox.txt => core-api/mailbox.rst}     |  0
>  .../nommu-mmap.rst}                           |  0
>  .../this_cpu_ops.rst}                         |  0
>  .../unaligned-memory-access.rst}              |  0
>  Documentation/driver-api/index.rst            |  1 +
>  .../{IPMI.txt => driver-api/ipmi.rst}         |  0
>  Documentation/driver-api/usb/dma.rst          |  6 +-
>  Documentation/gpu/drm-mm.rst                  |  2 +-
>  Documentation/ia64/irq-redir.rst              |  2 +-
>  Documentation/index.rst                       | 13 ++++
>  .../futex-requeue-pi.rst}                     |  0
>  .../hwspinlock.rst}                           |  0
>  Documentation/locking/index.rst               |  7 +++
>  .../percpu-rw-semaphore.rst}                  |  0
>  .../{pi-futex.txt => locking/pi-futex.rst}    |  0
>  .../preempt-locking.rst}                      |  0
>  .../robust-futex-ABI.rst}                     |  0
>  .../robust-futexes.rst}                       |  0
>  Documentation/locking/rt-mutex.rst            |  2 +-
>  Documentation/memory-barriers.txt             |  6 +-
>  Documentation/networking/scaling.rst          |  4 +-
>  .../{digsig.txt => security/digsig.rst}       |  0
>  Documentation/security/index.rst              |  1 +
>  .../{crc32.txt => staging/crc32.rst}          |  0
>  Documentation/staging/index.rst               | 59 +++++++++++++++++++
>  .../{kprobes.txt => staging/kprobes.rst}      |  0
>  Documentation/{lzo.txt => staging/lzo.rst}    |  0
>  .../remoteproc.rst}                           |  2 +-
>  .../{rpmsg.txt => staging/rpmsg.rst}          |  0
>  .../speculation.rst}                          |  8 ++-
>  .../static-keys.rst}                          |  0
>  Documentation/{tee.txt => staging/tee.rst}    |  1 +
>  Documentation/{xz.txt => staging/xz.rst}      |  0
>  Documentation/trace/kprobetrace.rst           |  2 +-
>  .../translations/ko_KR/memory-barriers.txt    |  6 +-
>  Documentation/translations/zh_CN/IRQ.txt      |  4 +-
>  MAINTAINERS                                   | 20 +++----
>  arch/Kconfig                                  |  2 +-
>  arch/ia64/hp/common/sba_iommu.c               | 12 ++--
>  arch/parisc/kernel/pci-dma.c                  |  2 +-
>  arch/x86/include/asm/dma-mapping.h            |  4 +-
>  arch/x86/kernel/amd_gart_64.c                 |  2 +-
>  drivers/char/ipmi/Kconfig                     |  2 +-
>  drivers/char/ipmi/ipmi_si_hotmod.c            |  2 +-
>  drivers/char/ipmi/ipmi_si_intf.c              |  2 +-
>  drivers/parisc/sba_iommu.c                    | 14 ++---
>  include/asm-generic/bitops/atomic.h           |  2 +-
>  include/linux/dma-mapping.h                   |  2 +-
>  include/linux/jump_label.h                    |  2 +-
>  include/media/videobuf-dma-sg.h               |  2 +-
>  init/Kconfig                                  |  2 +-
>  kernel/dma/debug.c                            |  2 +-
>  lib/Kconfig.debug                             |  2 +-
>  lib/crc32.c                                   |  2 +-
>  lib/lzo/lzo1x_decompress_safe.c               |  2 +-
>  lib/xz/Kconfig                                |  2 +-
>  mm/Kconfig                                    |  2 +-
>  mm/nommu.c                                    |  2 +-
>  samples/kprobes/kprobe_example.c              |  2 +-
>  samples/kprobes/kretprobe_example.c           |  2 +-
>  80 files changed, 191 insertions(+), 81 deletions(-)
>  rename Documentation/{bus-virt-phys-mapping.txt => core-api/bus-virt-phys-mapping.rst} (99%)
>  rename Documentation/{debugging-via-ohci1394.txt => core-api/debugging-via-ohci1394.rst} (100%)
>  rename Documentation/{DMA-API-HOWTO.txt => core-api/dma-api-howto.rst} (100%)
>  rename Documentation/{DMA-API.txt => core-api/dma-api.rst} (99%)
>  rename Documentation/{DMA-attributes.txt => core-api/dma-attributes.rst} (100%)
>  rename Documentation/{DMA-ISA-LPC.txt => core-api/dma-isa-lpc.rst} (98%)
>  rename Documentation/{IRQ.txt => core-api/irq/concepts.rst} (100%)
>  create mode 100644 Documentation/core-api/irq/index.rst
>  rename Documentation/{IRQ-affinity.txt => core-api/irq/irq-affinity.rst} (100%)
>  rename Documentation/{IRQ-domain.txt => core-api/irq/irq-domain.rst} (99%)
>  rename Documentation/{irqflags-tracing.txt => core-api/irq/irqflags-tracing.rst} (100%)
>  rename Documentation/{kref.txt => core-api/kref.rst} (100%)
>  rename Documentation/{mailbox.txt => core-api/mailbox.rst} (100%)
>  rename Documentation/{nommu-mmap.txt => core-api/nommu-mmap.rst} (100%)
>  rename Documentation/{this_cpu_ops.txt => core-api/this_cpu_ops.rst} (100%)
>  rename Documentation/{unaligned-memory-access.txt => core-api/unaligned-memory-access.rst} (100%)
>  rename Documentation/{IPMI.txt => driver-api/ipmi.rst} (100%)
>  rename Documentation/{futex-requeue-pi.txt => locking/futex-requeue-pi.rst} (100%)
>  rename Documentation/{hwspinlock.txt => locking/hwspinlock.rst} (100%)
>  rename Documentation/{percpu-rw-semaphore.txt => locking/percpu-rw-semaphore.rst} (100%)
>  rename Documentation/{pi-futex.txt => locking/pi-futex.rst} (100%)
>  rename Documentation/{preempt-locking.txt => locking/preempt-locking.rst} (100%)
>  rename Documentation/{robust-futex-ABI.txt => locking/robust-futex-ABI.rst} (100%)
>  rename Documentation/{robust-futexes.txt => locking/robust-futexes.rst} (100%)
>  rename Documentation/{digsig.txt => security/digsig.rst} (100%)
>  rename Documentation/{crc32.txt => staging/crc32.rst} (100%)
>  create mode 100644 Documentation/staging/index.rst
>  rename Documentation/{kprobes.txt => staging/kprobes.rst} (100%)
>  rename Documentation/{lzo.txt => staging/lzo.rst} (100%)
>  rename Documentation/{remoteproc.txt => staging/remoteproc.rst} (99%)
>  rename Documentation/{rpmsg.txt => staging/rpmsg.rst} (100%)
>  rename Documentation/{speculation.txt => staging/speculation.rst} (97%)
>  rename Documentation/{static-keys.txt => staging/static-keys.rst} (100%)
>  rename Documentation/{tee.txt => staging/tee.rst} (99%)
>  rename Documentation/{xz.txt => staging/xz.rst} (100%)
>

diff stat above shows you are not moving Documentation/atomic_bitops.txt in
this series. However, PATCH 12/14 contains the following hunks:

> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1aa6e89e7424..8aa8f7c0db93 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
[...]
> @@ -9855,7 +9855,7 @@ L:	linux-kernel@vger.kernel.org
>  L:	linux-arch@vger.kernel.org
>  S:	Supported
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
> -F:	Documentation/atomic_bitops.txt
> +F:	Documentation/staging/atomic_bitops.txt
>  F:	Documentation/atomic_t.txt
>  F:	Documentation/core-api/atomic_ops.rst
>  F:	Documentation/core-api/refcount-vs-atomic.rst

[...]

> diff --git a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h
> index dd90c9792909..edeeb8375006 100644
> --- a/include/asm-generic/bitops/atomic.h
> +++ b/include/asm-generic/bitops/atomic.h
> @@ -8,7 +8,7 @@
>  
>  /*
>   * Implementation of atomic bitops using atomic-fetch ops.
> - * See Documentation/atomic_bitops.txt for details.
> + * See Documentation/staging/atomic_bitops.txt for details.
>   */
>  
>  static inline void set_bit(unsigned int nr, volatile unsigned long *p)

Please drop them.

        Thanks, Akira

Re: [PATCH 00/14] Move the ReST files from Documentation/*.txt

[Mauro Carvalho Chehab]

Em Mon, 4 May 2020 18:25:51 +0900
Akira Yokosawa <akiyks@gmail.com> escreveu:

> (CC to documentation, get_maintainer, and LKMM maintainers)
> 
> Hi Mauro,
> 
> As I didn't receive "[PATCH 12/14] docs: move remaining stuff under
> Documentation/*.txt to Documentation/staging", I'm replying to
> [PATCH 00/14].
>
> diff stat above shows you are not moving Documentation/atomic_bitops.txt in
> this series. However, PATCH 12/14 contains the following hunks:
> 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 1aa6e89e7424..8aa8f7c0db93 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS  
> [...]
> > @@ -9855,7 +9855,7 @@ L:	linux-kernel@vger.kernel.org
> >  L:	linux-arch@vger.kernel.org
> >  S:	Supported
> >  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
> > -F:	Documentation/atomic_bitops.txt
> > +F:	Documentation/staging/atomic_bitops.txt
> >  F:	Documentation/atomic_t.txt
> >  F:	Documentation/core-api/atomic_ops.rst
> >  F:	Documentation/core-api/refcount-vs-atomic.rst  
> 
> [...]
> 
> > diff --git a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h
> > index dd90c9792909..edeeb8375006 100644
> > --- a/include/asm-generic/bitops/atomic.h
> > +++ b/include/asm-generic/bitops/atomic.h
> > @@ -8,7 +8,7 @@
> >  
> >  /*
> >   * Implementation of atomic bitops using atomic-fetch ops.
> > - * See Documentation/atomic_bitops.txt for details.
> > + * See Documentation/staging/atomic_bitops.txt for details.
> >   */
> >  
> >  static inline void set_bit(unsigned int nr, volatile unsigned long *p)  
> 
> Please drop them.

Thanks for pointing! Yeah, I noticed that too from Joe's review.
Already dropped locally. I'll post a new version without such change.


Thanks,
Mauro

Re: [PATCH 12/14] docs: move remaining stuff under Documentation/*.txt to Documentation/staging

[Naveen N. Rao]

Masami Hiramatsu wrote:
> On Fri,  1 May 2020 17:37:56 +0200
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> 
>> There are several files that I was unable to find a proper place
>> for them, and 3 ones that are still in plain old text format.
>> 
>> Let's place those stuff behind the carpet, as we'd like to keep the
>> root directory clean.
>> 
>> We can later discuss and move those into better places.
> 
> Hi Mauro,
> 
> Thanks for cleaning it up! Tentatively moving kprobes.txt under
> staging/ is good to me.
> 
> Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
> 
> BTW, I think kprobes.txt is under trace/ or we may be better
> making a new core-api/events/ directory and prepare other event
> systems (PMU, uprobes, and hw_breakpoint.) 

I think it would be good to move kprobes.txt under trace/ -- all other 
tracing bits are already present there, including uprobes.


- Naveen

Re: [PATCH 01/14] docs: move DMA kAPI to Documentation/core-api

[Jonathan Corbet]

On Fri,  1 May 2020 17:37:45 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> Move those files to the core-api, where they belong, renaming
> them to ReST and adding to the core API index file.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../{DMA-API-HOWTO.txt => core-api/dma-api-howto.rst}         | 0
>  Documentation/{DMA-API.txt => core-api/dma-api.rst}           | 0
>  .../{DMA-attributes.txt => core-api/dma-attributes.rst}       | 0
>  Documentation/{DMA-ISA-LPC.txt => core-api/dma-isa-lpc.rst}   | 0
>  Documentation/core-api/index.rst                              | 4 ++++
>  5 files changed, 4 insertions(+)
>  rename Documentation/{DMA-API-HOWTO.txt => core-api/dma-api-howto.rst} (100%)
>  rename Documentation/{DMA-API.txt => core-api/dma-api.rst} (100%)
>  rename Documentation/{DMA-attributes.txt => core-api/dma-attributes.rst} (100%)
>  rename Documentation/{DMA-ISA-LPC.txt => core-api/dma-isa-lpc.rst} (100%)

This one seems obvious, applied.

jon

Re: [PATCH 02/14] docs: add bus-virt-phys-mapping.txt to core-api

[Jonathan Corbet]

On Fri,  1 May 2020 17:37:46 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> This describes an old interface used prior the new DMA-API
> interfaces. Add it to the core-api guide, just after the
> DMA stuff.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../bus-virt-phys-mapping.rst}                                   | 0
>  Documentation/core-api/index.rst                                 | 1 +
>  2 files changed, 1 insertion(+)
>  rename Documentation/{bus-virt-phys-mapping.txt => core-api/bus-virt-phys-mapping.rst} (100%)

For this one, I think we should maybe just delete the file.  It contains a
warning from *20 years ago* saying not to use it, and talks about
functions like isa_readl() that haven't existed i the kernel for some
time.  Is there any reason to keep dragging it around?

jon

Re: [PATCH 04/14] docs: move IPMI.txt to the driver API book

[Jonathan Corbet]

On Fri,  1 May 2020 17:37:48 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> The IPMI is under drivers/char. This doc describes the kAPI
> part of the IPMI (mainly).
> 
> So, move it to the driver-api directory and add it to the
> corresponding index.rst file.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Applied this one (and the fixups in patch 5), thanks.

jon

Re: [PATCH 06/14] docs: debugging-via-ohci1394.txt: add it to the core-api book

[Jonathan Corbet]

On Fri,  1 May 2020 17:37:50 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> There is an special chapter inside the core-api book about
> some debug infrastructure like tracepoints and debug objects.
> 
> It sounded to me that this is the best place to add a chapter
> explaining how to use a FireWire controller to do remote
> kernel debugging, as explained on this document.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

I've applied this, but core-api really seems like the wrong place for
this.  It would be good to rethink our layout a bit at some point in the
near future...

Thanks,

jon

Re: [PATCH 07/14] docs: add IRQ documentation at the core-api book

[Jonathan Corbet]

On Fri,  1 May 2020 17:37:51 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> There are 4 IRQ documentation files under Documentation/*.txt.
> 
> Move them into a new directory (core-api/irq) and add a new
> index file for it.
> 
> While here, use a title markup for the Debugging section of the
> irq-domain.rst file.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Applied, thanks.

jon

Re: [PATCH 08/14] docs: move kobject and kref docs into the core-api book

[Jonathan Corbet]

On Fri,  1 May 2020 17:37:52 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> Both documents are documenting Kernel core objects. So, add
> them into the core-api book.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/core-api/index.rst              | 1 +
>  Documentation/core-api/kobject.rst            | 2 +-
>  Documentation/{kref.txt => core-api/kref.rst} | 0
>  3 files changed, 2 insertions(+), 1 deletion(-)
>  rename Documentation/{kref.txt => core-api/kref.rst} (100%)

Applied with a tweaked changelog, since it's not actually moving the
kobject doc.

jon

Re: [PATCH 09/14] docs: move digsig docs to the security book

[Jonathan Corbet]

On Fri,  1 May 2020 17:37:53 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/{digsig.txt => security/digsig.rst} | 0
>  Documentation/security/index.rst                  | 1 +
>  2 files changed, 1 insertion(+)
>  rename Documentation/{digsig.txt => security/digsig.rst} (100%)
> 
> diff --git a/Documentation/digsig.txt b/Documentation/security/digsig.rst
> similarity index 100%
> rename from Documentation/digsig.txt
> rename to Documentation/security/digsig.rst
> diff --git a/Documentation/security/index.rst b/Documentation/security/index.rst
> index fc503dd689a7..8129405eb2cc 100644
> --- a/Documentation/security/index.rst
> +++ b/Documentation/security/index.rst
> @@ -15,3 +15,4 @@ Security Documentation
>     self-protection
>     siphash
>     tpm/index
> +   digsig

Applied, thanks.

jon

Re: [PATCH 10/14] docs: move locking-specific documenta to locking/ directory

[Jonathan Corbet]

On Fri,  1 May 2020 17:37:54 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> Several files under Documentation/*.txt describe some type of
> locking API. Move them to locking/ subdir and add to the
> locking/index.rst index file.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

I've applied this, but it really seems like this belongs in the core-api
manual someday.

Thanks,

jon

Re: [PATCH 11/14] docs: move other kAPI documents to core-api

[Jonathan Corbet]

On Fri,  1 May 2020 17:37:55 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> There are a number of random documents that seem to be
> describing some aspects of the core-api. Move them to such
> directory, adding them at the core-api/index.rst file.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/admin-guide/sysctl/vm.rst                     | 2 +-
>  Documentation/core-api/index.rst                            | 6 ++++++
>  Documentation/{mailbox.txt => core-api/mailbox.rst}         | 0
>  Documentation/{nommu-mmap.txt => core-api/nommu-mmap.rst}   | 0
>  .../{this_cpu_ops.txt => core-api/this_cpu_ops.rst}         | 0
>  .../unaligned-memory-access.rst}                            | 0
>  Documentation/gpu/drm-mm.rst                                | 2 +-
>  arch/Kconfig                                                | 2 +-
>  init/Kconfig                                                | 2 +-
>  mm/Kconfig                                                  | 2 +-
>  mm/nommu.c                                                  | 2 +-
>  11 files changed, 12 insertions(+), 6 deletions(-)
>  rename Documentation/{mailbox.txt => core-api/mailbox.rst} (100%)
>  rename Documentation/{nommu-mmap.txt => core-api/nommu-mmap.rst} (100%)
>  rename Documentation/{this_cpu_ops.txt => core-api/this_cpu_ops.rst} (100%)
>  rename Documentation/{unaligned-memory-access.txt => core-api/unaligned-memory-access.rst} (100%)

This one doesn't apply for me.  Beyond that, I'm not entirely convinced
about a couple of the moves...

 - mailbox.txt seems like driver-api stuff to me?
 - nommu-mmap.txt is mostly (though not completely) about the semantic of
   mmap() options as seen by user space, so perhaps belongs in that
   manual...?

Thanks,

jon

Re: [PATCH 02/14] docs: add bus-virt-phys-mapping.txt to core-api

[Mauro Carvalho Chehab]

Em Fri, 15 May 2020 11:53:21 -0600
Jonathan Corbet <corbet@lwn.net> escreveu:

> On Fri,  1 May 2020 17:37:46 +0200
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> 
> > This describes an old interface used prior the new DMA-API
> > interfaces. Add it to the core-api guide, just after the
> > DMA stuff.
> > 
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> > ---
> >  .../bus-virt-phys-mapping.rst}                                   | 0
> >  Documentation/core-api/index.rst                                 | 1 +
> >  2 files changed, 1 insertion(+)
> >  rename Documentation/{bus-virt-phys-mapping.txt => core-api/bus-virt-phys-mapping.rst} (100%)  
> 
> For this one, I think we should maybe just delete the file.  It contains a
> warning from *20 years ago* saying not to use it, and talks about
> functions like isa_readl() that haven't existed i the kernel for some
> time.  Is there any reason to keep dragging it around?

Except for "keeping it for historical reasons" (as mentioned at the
file), I don't see any reason why to keep it.

It might be useful if someone wants to port some OOT code based on
a legacy kernel.

Yet, if you prefer to just trash it, I'm ok with that.

Thanks,
Mauro

Re: [PATCH 06/14] docs: debugging-via-ohci1394.txt: add it to the core-api book

[Mauro Carvalho Chehab]

Em Fri, 15 May 2020 12:00:16 -0600
Jonathan Corbet <corbet@lwn.net> escreveu:

> On Fri,  1 May 2020 17:37:50 +0200
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> 
> > There is an special chapter inside the core-api book about
> > some debug infrastructure like tracepoints and debug objects.
> > 
> > It sounded to me that this is the best place to add a chapter
> > explaining how to use a FireWire controller to do remote
> > kernel debugging, as explained on this document.
> > 
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>  
> 
> I've applied this, but core-api really seems like the wrong place for
> this.  It would be good to rethink our layout a bit at some point in the
> near future...

Yeah, agreed. Debug functionality should likely deserve a separate
chapter outside core-api.

Now that we'll have all docs converted, it should be easier to view
the hole picture and re-design the doc organization.


Thanks,
Mauro

Re: [PATCH 10/14] docs: move locking-specific documenta to locking/ directory

[Mauro Carvalho Chehab]

Em Fri, 15 May 2020 12:06:07 -0600
Jonathan Corbet <corbet@lwn.net> escreveu:

> On Fri,  1 May 2020 17:37:54 +0200
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> 
> > Several files under Documentation/*.txt describe some type of
> > locking API. Move them to locking/ subdir and add to the
> > locking/index.rst index file.
> > 
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>  
> 
> I've applied this, but it really seems like this belongs in the core-api
> manual someday.

Makes sense.

Well, right now, it is at the same level as core-api, just below it:

	Kernel API documentation
	------------------------

	These books get into the details of how specific kernel subsystems work
	from the point of view of a kernel developer.  Much of the information here
	is taken directly from the kernel source, with supplemental material added
	as needed (or at least as we managed to add it — probably *not* all that is
	needed).
	
	.. toctree::
	   :maxdepth: 2
	
	   driver-api/index
	   core-api/index
	   locking/index

Not too bad.

Btw, there are other doc sets that could also fit into the core-api, like:

	...
	   accounting/index
	...
	   security/index
	...
	   bpf/index
	...
	   scheduler/index

while most of the rest should likely be inside driver-api.

Some care should be taken when moving stuff, though: there is a
reason why they weren't moved to driver-api in the first place:
they may contain stuff for the admin guide mixed there.

Thanks,
Mauro