linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
To: Alexandre Courbot <acourbot@chromium.org>,
	Tiffany Lin <tiffany.lin@mediatek.com>,
	Andrew-CT Chen <andrew-ct.chen@mediatek.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Tomasz Figa <tfiga@chromium.org>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mediatek@lists.infradead.org,
	Randy Dunlap <rdunlap@infradead.org>
Subject: Re: [PATCH v2] media: mtk-vcodec: fix builds when remoteproc is disabled
Date: Thu, 8 Oct 2020 15:12:37 +0200	[thread overview]
Message-ID: <cda40a8e-4dd2-5fd7-c5ff-8b048475164b@xs4all.nl> (raw)
In-Reply-To: <c3e1c20a-7729-9f48-ce66-41e67f195fc7@xs4all.nl>

On 08/10/2020 15:07, Hans Verkuil wrote:
> Hi Alexandre,
> 
> On 04/10/2020 14:22, Alexandre Courbot wrote:
>> The addition of MT8183 support added a dependency on the SCP remoteproc
>> module. However the initial patch used the "select" Kconfig directive,
>> which may result in the SCP module to not be compiled if remoteproc was
>> disabled. In such a case, mtk-vcodec would try to link against
>> non-existent SCP symbols. "select" was clearly misused here as explained
>> in kconfig-language.txt.
>>
>> Replace this by a "depends" directive on at least one of the VPU and
>> SCP modules, to allow the driver to be compiled as long as one of these
>> is enabled, and adapt the code to support this new scenario.
>>
>> Also adapt the Kconfig text to explain the extra requirements for MT8173
>> and MT8183.
>>
>> Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
>> Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
>> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
>> ---
>>  drivers/media/platform/Kconfig                | 10 +--
>>  .../media/platform/mtk-vcodec/mtk_vcodec_fw.c | 72 ++++++++++++-------
>>  2 files changed, 54 insertions(+), 28 deletions(-)
>>
>> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
>> index a3cb104956d5..98eb62e49ec2 100644
>> --- a/drivers/media/platform/Kconfig
>> +++ b/drivers/media/platform/Kconfig
>> @@ -253,14 +253,16 @@ config VIDEO_MEDIATEK_VCODEC
>>  	depends on MTK_IOMMU || COMPILE_TEST
>>  	depends on VIDEO_DEV && VIDEO_V4L2
>>  	depends on ARCH_MEDIATEK || COMPILE_TEST
>> +	depends on VIDEO_MEDIATEK_VPU || MTK_SCP
> 
> Close, but no cigar.
> 
> If VIDEO_MEDIATEK_VPU=y and MTK_SCP=m, then VIDEO_MEDIATEK_VCODEC can be configured
> to y, and then it won't be able to find the scp_ functions.
> 
> To be honest, I'm not sure how to solve this.

Found it. Add this:

        depends on MTK_SCP || !MTK_SCP
        depends on VIDEO_MEDIATEK_VPU || !VIDEO_MEDIATEK_VPU

Ugly as hell, but it appears to be the correct incantation for this.

Regards,

	Hans

> 
> Regards,
> 
> 	Hans
> 
>>  	select VIDEOBUF2_DMA_CONTIG
>>  	select V4L2_MEM2MEM_DEV
>> -	select VIDEO_MEDIATEK_VPU
>> -	select MTK_SCP
>>  	help
>>  	    Mediatek video codec driver provides HW capability to
>> -	    encode and decode in a range of video formats
>> -	    This driver rely on VPU driver to communicate with VPU.
>> +	    encode and decode in a range of video formats on MT8173
>> +	    and MT8183.
>> +
>> +	    Note that support for MT8173 requires VIDEO_MEDIATEK_VPU to
>> +	    also be selected. Support for MT8183 depends on MTK_SCP.
>>  
>>  	    To compile this driver as modules, choose M here: the
>>  	    modules will be called mtk-vcodec-dec and mtk-vcodec-enc.
>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw.c
>> index 6c2a2568d844..23a80027a8fb 100644
>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw.c
>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw.c
>> @@ -13,6 +13,7 @@ struct mtk_vcodec_fw_ops {
>>  			    mtk_vcodec_ipi_handler handler, const char *name, void *priv);
>>  	int (*ipi_send)(struct mtk_vcodec_fw *fw, int id, void *buf,
>>  			unsigned int len, unsigned int wait);
>> +	void (*release)(struct mtk_vcodec_fw *fw);
>>  };
>>  
>>  struct mtk_vcodec_fw {
>> @@ -22,6 +23,8 @@ struct mtk_vcodec_fw {
>>  	struct mtk_scp *scp;
>>  };
>>  
>> +#if IS_ENABLED(CONFIG_VIDEO_MEDIATEK_VPU)
>> +
>>  static int mtk_vcodec_vpu_load_firmware(struct mtk_vcodec_fw *fw)
>>  {
>>  	return vpu_load_firmware(fw->pdev);
>> @@ -64,6 +67,27 @@ static int mtk_vcodec_vpu_ipi_send(struct mtk_vcodec_fw *fw, int id, void *buf,
>>  	return vpu_ipi_send(fw->pdev, id, buf, len);
>>  }
>>  
>> +static void mtk_vcodec_vpu_release(struct mtk_vcodec_fw *fw)
>> +{
>> +	put_device(&fw->pdev->dev);
>> +}
>> +
>> +static void mtk_vcodec_vpu_reset_handler(void *priv)
>> +{
>> +	struct mtk_vcodec_dev *dev = priv;
>> +	struct mtk_vcodec_ctx *ctx;
>> +
>> +	mtk_v4l2_err("Watchdog timeout!!");
>> +
>> +	mutex_lock(&dev->dev_mutex);
>> +	list_for_each_entry(ctx, &dev->ctx_list, list) {
>> +		ctx->state = MTK_STATE_ABORT;
>> +		mtk_v4l2_debug(0, "[%d] Change to state MTK_STATE_ABORT",
>> +			       ctx->id);
>> +	}
>> +	mutex_unlock(&dev->dev_mutex);
>> +}
>> +
>>  static const struct mtk_vcodec_fw_ops mtk_vcodec_vpu_msg = {
>>  	.load_firmware = mtk_vcodec_vpu_load_firmware,
>>  	.get_vdec_capa = mtk_vcodec_vpu_get_vdec_capa,
>> @@ -71,8 +95,13 @@ static const struct mtk_vcodec_fw_ops mtk_vcodec_vpu_msg = {
>>  	.map_dm_addr = mtk_vcodec_vpu_map_dm_addr,
>>  	.ipi_register = mtk_vcodec_vpu_set_ipi_register,
>>  	.ipi_send = mtk_vcodec_vpu_ipi_send,
>> +	.release = mtk_vcodec_vpu_release,
>>  };
>>  
>> +#endif  /* IS_ENABLED(CONFIG_VIDEO_MEDIATEK_VPU) */
>> +
>> +#if IS_ENABLED(CONFIG_MTK_SCP)
>> +
>>  static int mtk_vcodec_scp_load_firmware(struct mtk_vcodec_fw *fw)
>>  {
>>  	return rproc_boot(scp_get_rproc(fw->scp));
>> @@ -107,6 +136,11 @@ static int mtk_vcodec_scp_ipi_send(struct mtk_vcodec_fw *fw, int id, void *buf,
>>  	return scp_ipi_send(fw->scp, id, buf, len, wait);
>>  }
>>  
>> +static void mtk_vcodec_scp_release(struct mtk_vcodec_fw *fw)
>> +{
>> +	scp_put(fw->scp);
>> +}
>> +
>>  static const struct mtk_vcodec_fw_ops mtk_vcodec_rproc_msg = {
>>  	.load_firmware = mtk_vcodec_scp_load_firmware,
>>  	.get_vdec_capa = mtk_vcodec_scp_get_vdec_capa,
>> @@ -114,23 +148,10 @@ static const struct mtk_vcodec_fw_ops mtk_vcodec_rproc_msg = {
>>  	.map_dm_addr = mtk_vcodec_vpu_scp_dm_addr,
>>  	.ipi_register = mtk_vcodec_scp_set_ipi_register,
>>  	.ipi_send = mtk_vcodec_scp_ipi_send,
>> +	.release = mtk_vcodec_scp_release,
>>  };
>>  
>> -static void mtk_vcodec_reset_handler(void *priv)
>> -{
>> -	struct mtk_vcodec_dev *dev = priv;
>> -	struct mtk_vcodec_ctx *ctx;
>> -
>> -	mtk_v4l2_err("Watchdog timeout!!");
>> -
>> -	mutex_lock(&dev->dev_mutex);
>> -	list_for_each_entry(ctx, &dev->ctx_list, list) {
>> -		ctx->state = MTK_STATE_ABORT;
>> -		mtk_v4l2_debug(0, "[%d] Change to state MTK_STATE_ABORT",
>> -			       ctx->id);
>> -	}
>> -	mutex_unlock(&dev->dev_mutex);
>> -}
>> +#endif  /* IS_ENABLED(CONFIG_MTK_SCP) */
>>  
>>  struct mtk_vcodec_fw *mtk_vcodec_fw_select(struct mtk_vcodec_dev *dev,
>>  					   enum mtk_vcodec_fw_type type,
>> @@ -143,16 +164,22 @@ struct mtk_vcodec_fw *mtk_vcodec_fw_select(struct mtk_vcodec_dev *dev,
>>  
>>  	switch (type) {
>>  	case VPU:
>> +#if IS_ENABLED(CONFIG_VIDEO_MEDIATEK_VPU)
>>  		ops = &mtk_vcodec_vpu_msg;
>>  		fw_pdev = vpu_get_plat_device(dev->plat_dev);
>>  		if (!fw_pdev) {
>>  			mtk_v4l2_err("firmware device is not ready");
>>  			return ERR_PTR(-EINVAL);
>>  		}
>> -		vpu_wdt_reg_handler(fw_pdev, mtk_vcodec_reset_handler,
>> +		vpu_wdt_reg_handler(fw_pdev, mtk_vcodec_vpu_reset_handler,
>>  				    dev, rst_id);
>>  		break;
>> +#else
>> +		mtk_v4l2_err("no VPU support in this kernel");
>> +		return ERR_PTR(-ENODEV);
>> +#endif
>>  	case SCP:
>> +#if IS_ENABLED(CONFIG_MTK_SCP)
>>  		ops = &mtk_vcodec_rproc_msg;
>>  		scp = scp_get(dev->plat_dev);
>>  		if (!scp) {
>> @@ -160,6 +187,10 @@ struct mtk_vcodec_fw *mtk_vcodec_fw_select(struct mtk_vcodec_dev *dev,
>>  			return ERR_PTR(-EPROBE_DEFER);
>>  		}
>>  		break;
>> +#else
>> +		mtk_v4l2_err("no SCP support in this kernel");
>> +		return ERR_PTR(-ENODEV);
>> +#endif
>>  	default:
>>  		mtk_v4l2_err("invalid vcodec fw type");
>>  		return ERR_PTR(-EINVAL);
>> @@ -180,14 +211,7 @@ EXPORT_SYMBOL_GPL(mtk_vcodec_fw_select);
>>  
>>  void mtk_vcodec_fw_release(struct mtk_vcodec_fw *fw)
>>  {
>> -	switch (fw->type) {
>> -	case VPU:
>> -		put_device(&fw->pdev->dev);
>> -		break;
>> -	case SCP:
>> -		scp_put(fw->scp);
>> -		break;
>> -	}
>> +	fw->ops->release(fw);
>>  }
>>  EXPORT_SYMBOL_GPL(mtk_vcodec_fw_release);
>>  
>>
> 


  reply	other threads:[~2020-10-08 13:12 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-04 12:22 [PATCH v2] media: mtk-vcodec: fix builds when remoteproc is disabled Alexandre Courbot
2020-10-05  3:32 ` Alexandre Courbot
2020-10-05  8:48 ` Sakari Ailus
2020-10-05 11:29   ` Alexandre Courbot
2020-10-08 13:07 ` Hans Verkuil
2020-10-08 13:12   ` Hans Verkuil [this message]
2020-10-08 14:02     ` Alexandre Courbot
2020-10-08 16:13       ` Hans Verkuil
2020-10-09  4:30         ` Alexandre Courbot
     [not found]           ` <20201009083350.6c2e5a6a@coco.lan>
2020-10-12  4:58             ` Alexandre Courbot
2020-10-12  7:28               ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cda40a8e-4dd2-5fd7-c5ff-8b048475164b@xs4all.nl \
    --to=hverkuil-cisco@xs4all.nl \
    --cc=acourbot@chromium.org \
    --cc=andrew-ct.chen@mediatek.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=rdunlap@infradead.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tfiga@chromium.org \
    --cc=tiffany.lin@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).