Re: [PATCH v2 08/13] mpt3sas: Set NVMe device queue depth as 128

[Hannes Reinecke <hare@suse.de>]

On 07/14/2017 03:22 PM, Suganath Prabu S wrote:
> Sets nvme device queue depth, name and displays device capabilities
> 
> Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
> ---
>  drivers/scsi/mpt3sas/mpt3sas_base.h  |    2 +-
>  drivers/scsi/mpt3sas/mpt3sas_scsih.c |   40 ++++++++++++++++++++++++++++++++++
>  2 files changed, 41 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
> index 0a8187e..b7855c8 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.h
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
> @@ -115,7 +115,7 @@
>  
>  #define MPT3SAS_RAID_MAX_SECTORS	8192
>  #define MPT3SAS_HOST_PAGE_SIZE_4K	12
> -
> +#define MPT3SAS_NVME_QUEUE_DEPTH	128
>  #define MPT_NAME_LENGTH			32	/* generic length of strings */
>  #define MPT_STRING_LENGTH		64
>  
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> index 1dd9674..c5a131f 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> @@ -2290,6 +2290,7 @@ scsih_slave_configure(struct scsi_device *sdev)
>  	struct MPT3SAS_DEVICE *sas_device_priv_data;
>  	struct MPT3SAS_TARGET *sas_target_priv_data;
>  	struct _sas_device *sas_device;
> +	struct _pcie_device *pcie_device;
>  	struct _raid_device *raid_device;
>  	unsigned long flags;
>  	int qdepth;
> @@ -2420,6 +2421,45 @@ scsih_slave_configure(struct scsi_device *sdev)
>  		}
>  	}
>  
> +	/* PCIe handling */
> +	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
> +		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
> +		pcie_device = __mpt3sas_get_pdev_by_wwid(ioc,
> +				sas_device_priv_data->sas_target->sas_address);
> +		if (!pcie_device) {
> +			spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
> +			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
> +				"failure at %s:%d/%s()!\n", ioc->name, __FILE__,
> +				__LINE__, __func__));
> +			return 1;
> +		}
> +
> +		/*TODO-right Queue Depth?*/
> +		qdepth = MPT3SAS_NVME_QUEUE_DEPTH;
> +		ds = "NVMe";
> +		/*TODO-Add device name when defined*/
> +		sdev_printk(KERN_INFO, sdev,
> +			"%s: handle(0x%04x), wwid(0x%016llx), port(%d)\n",
> +			ds, handle, (unsigned long long)pcie_device->wwid,
> +			pcie_device->port_num);
> +		if (pcie_device->enclosure_handle != 0)
> +			sdev_printk(KERN_INFO, sdev,
> +			"%s: enclosure logical id(0x%016llx), slot(%d)\n",
> +			ds,
> +			(unsigned long long)pcie_device->enclosure_logical_id,
> +			pcie_device->slot);
> +		if (pcie_device->connector_name[0] != '\0')
> +			sdev_printk(KERN_INFO, sdev,
> +				"%s: enclosure level(0x%04x),"
> +				"connector name( %s)\n", ds,
> +				pcie_device->enclosure_level,
> +				pcie_device->connector_name);
> +		pcie_device_put(pcie_device);
> +		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
> +		scsih_change_queue_depth(sdev, qdepth);
> +		return 0;
> +	}
> +
>  	spin_lock_irqsave(&ioc->sas_device_lock, flags);
>  	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
>  	   sas_device_priv_data->sas_target->sas_address);
> 
Well; what are these TODOs doing here?
If you know things are not correct, why not doing them correctly?
If you cannot do them correctly, why?

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		   Teamlead Storage & Networking
hare@suse.de			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)