linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v8 0/7] Add support for the IEI WT61P803 PUZZLE MCU
@ 2021-07-05 13:49 Pavo Banicevic
  2021-07-05 13:49 ` [PATCH v8 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings Pavo Banicevic
                   ` (6 more replies)
  0 siblings, 7 replies; 12+ messages in thread
From: Pavo Banicevic @ 2021-07-05 13:49 UTC (permalink / raw)
  To: linux-doc, linux-leds, devicetree, linux-hwmon, linux-kernel,
	geert+renesas, Max.Merchel, linux, daniel, shawnguo, sam, arnd,
	krzysztof.kozlowski, pavo.banicevic, corbet, lee.jones, pavel,
	robh+dt, linux, jdelvare, goran.medic, luka.perkov, luka.kovacic

This patchset adds support for the IEI WT61P803 PUZZLE microcontroller,
which enables some board specific features like fan and LED control,
system power management and temperature sensor reading on some IEI
Puzzle series boards.

The first board to use this functionality is IEI Puzzle-M801 1U
Rackmount Network Appliance and is since v4 sent separately, as a
standalone patch.

Changes for v2:
   - Use LAAs for local-mac-address and match reg values
   - Code styling changes
   - Error handling moved to the end of the function
   - Define all magic numbers in the main header file
   - Convert the driver to make it OF independent
   - Refactor hwmon to use devm_hwmon_device_register_with_info()
   - Reduce the number of mutex locks
   - Allocate memory once for the response buffer
   - Reduce managed memory allocations
Changes for v3:
   - Move iei-wt61p803-puzzle driver sysfs interface documentation to testing
   - Change some internal functions to static
   - Sync dt-bindings examples with the IEI Puzzle-M801 board dts
   - Remove obsolete device tree properties and correct LED functions
   - Reverse christmas tree variable declaration order, where possible
   - MAC address sysfs function rewrite
   - Fixed struct members size, where reasonable (MFD driver)
   - Add an error check for hwmon_dev
   - Use devm_led_classdev_register_ext() in the LED driver
Changes for v4:
   - Clean up sensible checks reported by checkpatch --strict
   - Document the mutex lock usage in the LED driver
   - Fix error handling and code styling issues in the HWMON driver
   - Break up the patchset and send the IEI Puzzle-M801 board support
     patch separately
Changes for v5:
   - Remove the return before goto to also fwnode_handle_put(child)
     when ret is 0 (LED driver)
   - Change unsigned char arrays to static where applicable
   - Fix unconventional line indentations
   - Remove unnecessary checks in the HWMON driver
   - Remove unnecessary type casts
   - Clear up command array assignments, where the command array is
     modified before it is sent
   - Resolve a checksum calculation issue
   - Add Luka Perkov to MAINTAINERS
Changes for v6:
   - Use the container_of() macro to get the led_cdev parent struct
   - Use %u instead of %lu in a printf() (LED driver)
Changes for v7:
   - Use the correct vendor title (IEI instead of iEi)
   - Add missing properties to dt-bindings and fix styling issues
   - Styling changes in the IEI WT61P803 PUZZLE HWMON driver
   - Add missing commas in array definitions
   - Check reply_size, where possible
   - Clean up kernel-doc comments
Changes for v8:
   - Fix multiple style issues
   - Reduce number of special allocations
   - Remove unnecessary special state tracking with write/read commands
   - Remove most of commands calls from probing of driver
   - Add hwmon documentation file
   - Replace some sprintf() calls with safer scnprintf()
   - Remove unused defines
   - Remove all explicit castings
   - Shorter name of device for hwmon driver so snprintf() can
     store device number
   - Remove special kobj usage
   - Use dev groups in place of deprecated device attributes
   - Extend documentation for some descriptions of ABI documentation
   - Add missing locking for response buffer in hwmon driver
   - Fix inconsistency with license versions
   - Check return value of iei_wt61p803_puzzle_sysfs_create()
   - Remove unneeded initializations of reply_size variable in drivers
   - Use define for fixed number of MAC addresses
   - Reorder some variable declarations to follow preferred style
   - Spell whole WoL acronym
   - Drop __func__ from device error message
   - Use sizeof() where it is possible
   - Use hex_asc[] array for converting number to ascii value
   - Remove unnecessary hwmon-sysfs.h include
   - Stop being overly verbose when probing mfd driver


Luka Kovacic (7):
  dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver
    bindings
  drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU
  drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver
  drivers: leds: Add the IEI WT61P803 PUZZLE LED driver
  Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface
    documentation
  Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver
    documentation
  MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE driver

 .../testing/sysfs-driver-iei-wt61p803-puzzle  |  61 ++
 .../hwmon/iei,wt61p803-puzzle-hwmon.yaml      |  53 +
 .../leds/iei,wt61p803-puzzle-leds.yaml        |  44 +
 .../bindings/mfd/iei,wt61p803-puzzle.yaml     |  82 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 .../hwmon/iei-wt61p803-puzzle-hwmon.rst       |  40 +
 MAINTAINERS                                   |  16 +
 drivers/hwmon/Kconfig                         |   8 +
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c     | 413 ++++++++
 drivers/leds/Kconfig                          |   8 +
 drivers/leds/Makefile                         |   1 +
 drivers/leds/leds-iei-wt61p803-puzzle.c       | 156 +++
 drivers/mfd/Kconfig                           |   8 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/iei-wt61p803-puzzle.c             | 908 ++++++++++++++++++
 include/linux/mfd/iei-wt61p803-puzzle.h       |  66 ++
 17 files changed, 1868 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
 create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
 create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
 create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
 create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c
 create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c
 create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h

-- 
2.31.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v8 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings
  2021-07-05 13:49 [PATCH v8 0/7] Add support for the IEI WT61P803 PUZZLE MCU Pavo Banicevic
@ 2021-07-05 13:49 ` Pavo Banicevic
  2021-07-12 16:04   ` Rob Herring
  2021-07-05 13:49 ` [PATCH v8 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU Pavo Banicevic
                   ` (5 subsequent siblings)
  6 siblings, 1 reply; 12+ messages in thread
From: Pavo Banicevic @ 2021-07-05 13:49 UTC (permalink / raw)
  To: linux-doc, linux-leds, devicetree, linux-hwmon, linux-kernel,
	geert+renesas, Max.Merchel, linux, daniel, shawnguo, sam, arnd,
	krzysztof.kozlowski, pavo.banicevic, corbet, lee.jones, pavel,
	robh+dt, linux, jdelvare, goran.medic, luka.perkov, luka.kovacic
  Cc: Robert Marko

From: Luka Kovacic <luka.kovacic@sartura.hr>

Add the IEI WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED
drivers. A new vendor prefix is also added accordingly for
IEI Integration Corp.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
---
 .../hwmon/iei,wt61p803-puzzle-hwmon.yaml      | 53 ++++++++++++
 .../leds/iei,wt61p803-puzzle-leds.yaml        | 44 ++++++++++
 .../bindings/mfd/iei,wt61p803-puzzle.yaml     | 82 +++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 4 files changed, 181 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
new file mode 100644
index 000000000000..c24a24e90495
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IEI WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp.
+
+maintainers:
+  - Luka Kovacic <luka.kovacic@sartura.hr>
+
+description: |
+  This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
+
+  The HWMON module is a sub-node of the MCU node in the Device Tree.
+
+properties:
+  compatible:
+    const: iei,wt61p803-puzzle-hwmon
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^fan-group@[0-1]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+        description:
+          Fan group ID
+
+      cooling-levels:
+        minItems: 1
+        maxItems: 255
+        description:
+          Cooling levels for the fans (PWM value mapping)
+    description: |
+      Properties for each fan group.
+    required:
+      - reg
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
new file mode 100644
index 000000000000..dc3e39aafd3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IEI WT61P803 PUZZLE MCU LED module from IEI Integration Corp.
+
+maintainers:
+  - Luka Kovacic <luka.kovacic@sartura.hr>
+
+description: |
+  This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
+
+  The LED module is a sub-node of the MCU node in the Device Tree.
+
+properties:
+  compatible:
+    const: iei,wt61p803-puzzle-leds
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "led@0":
+    type: object
+    $ref: common.yaml
+    description: |
+      Properties for a single LED.
+    properties:
+      reg:
+        description:
+          Index of the LED. Only one LED is supported at the moment.
+        const: 0
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
new file mode 100644
index 000000000000..2452631505cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IEI WT61P803 PUZZLE MCU from IEI Integration Corp.
+
+maintainers:
+  - Luka Kovacic <luka.kovacic@sartura.hr>
+
+description: |
+  IEI WT61P803 PUZZLE MCU is embedded in some IEI Puzzle series boards.
+  It's used for controlling system power states, fans, LEDs and temperature
+  sensors.
+
+  For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the
+  binding documents under the respective subsystem directories.
+
+properties:
+  compatible:
+    const: iei,wt61p803-puzzle
+
+  current-speed:
+    description:
+      Serial bus speed in bps
+    maxItems: 1
+
+  enable-beep: true
+
+  hwmon:
+    $ref: ../hwmon/iei,wt61p803-puzzle-hwmon.yaml
+
+  leds:
+    $ref: ../leds/iei,wt61p803-puzzle-leds.yaml
+
+required:
+  - compatible
+  - current-speed
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+    serial {
+        mcu {
+            compatible = "iei,wt61p803-puzzle";
+            current-speed = <115200>;
+            enable-beep;
+
+            leds {
+                compatible = "iei,wt61p803-puzzle-leds";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    function = LED_FUNCTION_POWER;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+
+            hwmon {
+                compatible = "iei,wt61p803-puzzle-hwmon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                fan-group@0 {
+                    #cooling-cells = <2>;
+                    reg = <0x00>;
+                    cooling-levels = <64 102 170 230 250>;
+                };
+
+                fan-group@1 {
+                    #cooling-cells = <2>;
+                    reg = <0x01>;
+                    cooling-levels = <64 102 170 230 250>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index b868cefc7c55..e02b6d6eb568 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -509,6 +509,8 @@ patternProperties:
     description: IC Plus Corp.
   "^idt,.*":
     description: Integrated Device Technologies, Inc.
+  "^iei,.*":
+    description: IEI Integration Corp.
   "^ifi,.*":
     description: Ingenieurburo Fur Ic-Technologie (I/F/I)
   "^ilitek,.*":
-- 
2.31.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v8 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU
  2021-07-05 13:49 [PATCH v8 0/7] Add support for the IEI WT61P803 PUZZLE MCU Pavo Banicevic
  2021-07-05 13:49 ` [PATCH v8 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings Pavo Banicevic
@ 2021-07-05 13:49 ` Pavo Banicevic
  2021-07-05 20:57   ` kernel test robot
  2021-07-05 13:49 ` [PATCH v8 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver Pavo Banicevic
                   ` (4 subsequent siblings)
  6 siblings, 1 reply; 12+ messages in thread
From: Pavo Banicevic @ 2021-07-05 13:49 UTC (permalink / raw)
  To: linux-doc, linux-leds, devicetree, linux-hwmon, linux-kernel,
	geert+renesas, Max.Merchel, linux, daniel, shawnguo, sam, arnd,
	krzysztof.kozlowski, pavo.banicevic, corbet, lee.jones, pavel,
	robh+dt, linux, jdelvare, goran.medic, luka.perkov, luka.kovacic
  Cc: Robert Marko

From: Luka Kovacic <luka.kovacic@sartura.hr>

Add a driver for the IEI WT61P803 PUZZLE microcontroller, used in some
IEI Puzzle series devices. The microcontroller controls system power,
temperature sensors, fans and LEDs.

This driver implements the core functionality for device communication
over the system serial (serdev bus). It handles MCU messages and the
internal MCU properties. Some properties can be managed over sysfs.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
---
 drivers/mfd/Kconfig                     |   8 +
 drivers/mfd/Makefile                    |   1 +
 drivers/mfd/iei-wt61p803-puzzle.c       | 908 ++++++++++++++++++++++++
 include/linux/mfd/iei-wt61p803-puzzle.h |  66 ++
 4 files changed, 983 insertions(+)
 create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c
 create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 5c7f2b100191..e7d932534b37 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2161,6 +2161,14 @@ config SGI_MFD_IOC3
 	  If you have an SGI Origin, Octane, or a PCI IOC3 card,
 	  then say Y. Otherwise say N.
 
+config MFD_IEI_WT61P803_PUZZLE
+	tristate "IEI WT61P803 PUZZLE MCU driver"
+	depends on SERIAL_DEV_BUS
+	help
+	  IEI WT61P803 PUZZLE is a system power management microcontroller
+	  used for fan control, temperature sensor reading, LED control
+	  and system identification.
+
 config MFD_INTEL_M10_BMC
 	tristate "Intel MAX 10 Board Management Controller"
 	depends on SPI_MASTER
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 4f6d2b8a5f76..a9d98148e788 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -236,6 +236,7 @@ obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655x-pmic.o
 obj-$(CONFIG_MFD_DLN2)		+= dln2.o
 obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
 obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
+obj-$(CONFIG_MFD_IEI_WT61P803_PUZZLE)	+= iei-wt61p803-puzzle.o
 
 intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
diff --git a/drivers/mfd/iei-wt61p803-puzzle.c b/drivers/mfd/iei-wt61p803-puzzle.c
new file mode 100644
index 000000000000..ead412790dd4
--- /dev/null
+++ b/drivers/mfd/iei-wt61p803-puzzle.c
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* IEI WT61P803 PUZZLE MCU Driver
+ * System management microcontroller for fan control, temperature sensor reading,
+ * LED control and system identification on IEI Puzzle series ARM-based appliances.
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include <linux/atomic.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/iei-wt61p803-puzzle.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/property.h>
+#include <linux/sched.h>
+#include <linux/serdev.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <asm/unaligned.h>
+
+/* start, payload and XOR checksum at end */
+#define IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH	(1 + 20 + 1)
+#define IEI_WT61P803_PUZZLE_RESP_BUF_SIZE	512
+
+#define IEI_WT61P803_PUZZLE_MAC_LENGTH			17
+#define IEI_WT61P803_PUZZLE_SN_LENGTH			36
+#define IEI_WT61P803_PUZZLE_VERSION_LENGTH		 6
+#define IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH		16
+#define IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH	 8
+#define IEI_WT61P803_PUZZLE_NB_MAC			 8
+
+/* Use HZ as a timeout value throughout the driver */
+#define IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT HZ
+
+enum iei_wt61p803_puzzle_attribute_type {
+	IEI_WT61P803_PUZZLE_VERSION,
+	IEI_WT61P803_PUZZLE_BUILD_INFO,
+	IEI_WT61P803_PUZZLE_BOOTLOADER_MODE,
+	IEI_WT61P803_PUZZLE_PROTOCOL_VERSION,
+	IEI_WT61P803_PUZZLE_SERIAL_NUMBER,
+	IEI_WT61P803_PUZZLE_MAC_ADDRESS,
+	IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS,
+	IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY,
+	IEI_WT61P803_PUZZLE_POWER_STATUS,
+};
+
+struct iei_wt61p803_puzzle_device_attribute {
+	struct device_attribute dev_attr;
+	enum iei_wt61p803_puzzle_attribute_type type;
+	u8 index;
+};
+
+/**
+ * struct iei_wt61p803_puzzle_mcu_status - MCU flags state
+ * @ac_recovery_status_flag:	AC Recovery Status Flag
+ * @power_loss_recovery:	System recovery after power loss
+ * @power_status:		System Power-on Method
+ */
+struct iei_wt61p803_puzzle_mcu_status {
+	u8 ac_recovery_status_flag;
+	u8 power_loss_recovery;
+	u8 power_status;
+};
+
+/**
+ * struct iei_wt61p803_puzzle_reply - MCU reply
+ * @size:	Size of the MCU reply
+ * @data:	Full MCU reply buffer
+ * @state:	Current state of the packet
+ * @received:	Was the response fullfilled
+ */
+struct iei_wt61p803_puzzle_reply {
+	size_t size;
+	unsigned char data[IEI_WT61P803_PUZZLE_RESP_BUF_SIZE];
+	struct completion received;
+};
+
+/**
+ * struct iei_wt61p803_puzzle_mcu_version - MCU version status
+ * @version:		Primary firmware version
+ * @build_info:		Build date and time
+ * @bootloader_mode:	Status of the MCU operation
+ * @protocol_version:	MCU communication protocol version
+ * @serial_number:	Device factory serial number
+ * @mac_address:	Device factory MAC addresses
+ *
+ * Last element of arrays is reserved for '\0'.
+ */
+struct iei_wt61p803_puzzle_mcu_version {
+	char version[IEI_WT61P803_PUZZLE_VERSION_LENGTH + 1];
+	char build_info[IEI_WT61P803_PUZZLE_BUILD_INFO_LENGTH + 1];
+	bool bootloader_mode;
+	char protocol_version[IEI_WT61P803_PUZZLE_PROTOCOL_VERSION_LENGTH + 1];
+	char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH + 1];
+	char mac_address[IEI_WT61P803_PUZZLE_NB_MAC][IEI_WT61P803_PUZZLE_MAC_LENGTH + 1];
+};
+
+/**
+ * struct iei_wt61p803_puzzle - IEI WT61P803 PUZZLE MCU Driver
+ * @serdev:		Pointer to underlying serdev device
+ * @dev:		Pointer to underlying dev device
+ * @reply_lock:		Reply mutex lock
+ * @reply:		Pointer to the iei_wt61p803_puzzle_reply struct
+ * @version:		MCU version related data
+ * @status:		MCU status related data
+ * @response_buffer	Command response buffer allocation
+ * @lock		General member mutex lock
+ */
+struct iei_wt61p803_puzzle {
+	struct serdev_device *serdev;
+	struct device *dev;
+	struct mutex reply_lock; /* lock to prevent multiple firmware calls */
+	struct iei_wt61p803_puzzle_reply *reply;
+	struct iei_wt61p803_puzzle_mcu_version version;
+	struct iei_wt61p803_puzzle_mcu_status status;
+	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
+	struct mutex lock; /* lock to protect response buffer */
+};
+
+static unsigned char iei_wt61p803_puzzle_checksum(unsigned char *buf, size_t len)
+{
+	unsigned char checksum = 0;
+	size_t i;
+
+	for (i = 0; i < len; i++)
+		checksum ^= buf[i];
+	return checksum;
+}
+
+static int iei_wt61p803_puzzle_process_resp(struct iei_wt61p803_puzzle *mcu,
+					    const unsigned char *raw_resp_data, size_t size)
+{
+	unsigned char checksum;
+
+	/* Check the incoming frame header */
+	if (!(raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START ||
+	      raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER ||
+	     (raw_resp_data[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM &&
+	      raw_resp_data[1] == IEI_WT61P803_PUZZLE_CMD_EEPROM_READ))) {
+		if (mcu->reply->size + size >= sizeof(mcu->reply->data))
+			return -EIO;
+
+		/* Append the frame to existing data */
+		memcpy(mcu->reply->data + mcu->reply->size, raw_resp_data, size);
+		mcu->reply->size += size;
+	} else {
+		if (size >= sizeof(mcu->reply->data))
+			return -EIO;
+
+		/* Start processing a new frame */
+		memcpy(mcu->reply->data, raw_resp_data, size);
+		mcu->reply->size = size;
+	}
+
+	checksum = iei_wt61p803_puzzle_checksum(mcu->reply->data, mcu->reply->size - 1);
+	if (checksum != mcu->reply->data[mcu->reply->size - 1]) {
+		/* The checksum isn't matched yet, wait for new frames */
+		return size;
+	}
+
+	/* Received all the data */
+	complete(&mcu->reply->received);
+
+	return size;
+}
+
+static int iei_wt61p803_puzzle_recv_buf(struct serdev_device *serdev,
+					const unsigned char *data, size_t size)
+{
+	struct iei_wt61p803_puzzle *mcu = serdev_device_get_drvdata(serdev);
+	int ret;
+
+	ret = iei_wt61p803_puzzle_process_resp(mcu, data, size);
+	/* Return the number of processed bytes if function returns error,
+	 * discard the remaining incoming data, since the frame this data
+	 * belongs to is broken anyway
+	 */
+	if (ret < 0)
+		return size;
+
+	return ret;
+}
+
+static const struct serdev_device_ops iei_wt61p803_puzzle_serdev_device_ops = {
+	.receive_buf  = iei_wt61p803_puzzle_recv_buf,
+	.write_wakeup = serdev_device_write_wakeup,
+};
+
+/**
+ * iei_wt61p803_puzzle_write_command_watchdog() - Watchdog of the normal cmd
+ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct
+ * @cmd: Pointer to the char array to send (size should be content + 1 (xor))
+ * @size: Size of the cmd char array
+ * @reply_data: Pointer to the reply/response data array (should be allocated)
+ * @reply_size: Pointer to size_t (size of reply_data)
+ * @retry_count: Number of times to retry sending the command to the MCU
+ */
+int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu,
+					       unsigned char *cmd, size_t size,
+					       unsigned char *reply_data,
+					       size_t *reply_size, int retry_count)
+{
+	struct device *dev = &mcu->serdev->dev;
+	int ret, i;
+
+	for (i = 0; i < retry_count; i++) {
+		ret = iei_wt61p803_puzzle_write_command(mcu, cmd, size,
+							reply_data, reply_size);
+		if (ret != -ETIMEDOUT)
+			return ret;
+	}
+
+	dev_err(dev, "Command response timed out. Retries: %d\n", retry_count);
+
+	return -ETIMEDOUT;
+}
+EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command_watchdog);
+
+/**
+ * iei_wt61p803_puzzle_write_command() - Send a structured command to the MCU
+ * @mcu: Pointer to the iei_wt61p803_puzzle core MFD struct
+ * @cmd: Pointer to the char array to send (size should be content + 1 (xor))
+ * @size: Size of the cmd char array
+ * @reply_data: Pointer to the reply/response data array (should be allocated)
+ *
+ * Sends a structured command to the MCU.
+ */
+int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu,
+				      unsigned char *cmd, size_t size,
+				      unsigned char *reply_data,
+				      size_t *reply_size)
+{
+	struct device *dev = &mcu->serdev->dev;
+	int ret;
+
+	if (size <= 1 || size > IEI_WT61P803_PUZZLE_MAX_COMMAND_LENGTH)
+		return -EINVAL;
+
+	mutex_lock(&mcu->reply_lock);
+
+	cmd[size - 1] = iei_wt61p803_puzzle_checksum(cmd, size - 1);
+
+	/* Initialize reply struct */
+	reinit_completion(&mcu->reply->received);
+	mcu->reply->size = 0;
+	usleep_range(2000, 10000);
+	serdev_device_write_flush(mcu->serdev);
+	ret = serdev_device_write_buf(mcu->serdev, cmd, size);
+	if (ret < 0)
+		goto exit;
+
+	serdev_device_wait_until_sent(mcu->serdev, IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
+	ret = wait_for_completion_timeout(&mcu->reply->received,
+					  IEI_WT61P803_PUZZLE_GENERAL_TIMEOUT);
+	if (ret == 0) {
+		dev_err(dev, "Command reply receive timeout\n");
+		ret = -ETIMEDOUT;
+		goto exit;
+	}
+
+	*reply_size = mcu->reply->size;
+	/* Copy the received data, as it will not be available after a new frame is received */
+	memcpy(reply_data, mcu->reply->data, mcu->reply->size);
+	ret = 0;
+exit:
+	mutex_unlock(&mcu->reply_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(iei_wt61p803_puzzle_write_command);
+
+int iei_wt61p803_puzzle_buzzer(struct iei_wt61p803_puzzle *mcu, bool long_beep)
+{
+	unsigned char *resp_buf = mcu->response_buffer;
+	unsigned char buzzer_cmd[4] = {};
+	size_t reply_size;
+	int ret;
+
+	buzzer_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
+	buzzer_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE;
+	buzzer_cmd[2] = long_beep ? '3' : '2'; /* Buzzer 1.5 / 0.5 second beep */
+
+	mutex_lock(&mcu->lock);
+	ret = iei_wt61p803_puzzle_write_command(mcu, buzzer_cmd, sizeof(buzzer_cmd),
+						resp_buf, &reply_size);
+	if (ret)
+		goto exit;
+
+	if (reply_size != 3) {
+		ret = -EIO;
+		goto exit;
+	}
+
+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
+		ret = -EPROTO;
+		goto exit;
+	}
+exit:
+	mutex_unlock(&mcu->lock);
+	return ret;
+}
+
+static int iei_wt61p803_puzzle_get_version(struct iei_wt61p803_puzzle *mcu)
+{
+	unsigned char version_cmd[3] = {
+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
+		IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION,
+	};
+	unsigned char build_info_cmd[3] = {
+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
+		IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD,
+	};
+	unsigned char bootloader_mode_cmd[3] = {
+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
+		IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE,
+	};
+	unsigned char protocol_version_cmd[3] = {
+		IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER,
+		IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION,
+	};
+	unsigned char *rb = mcu->response_buffer;
+	size_t reply_size;
+	int ret;
+
+	mutex_lock(&mcu->lock);
+
+	ret = iei_wt61p803_puzzle_write_command(mcu, version_cmd, sizeof(version_cmd),
+						rb, &reply_size);
+	if (ret)
+		goto err;
+	if (reply_size < 7) {
+		ret = -EIO;
+		goto err;
+	}
+	sprintf(mcu->version.version, "v%c.%.3s", rb[2], &rb[3]);
+
+	ret = iei_wt61p803_puzzle_write_command(mcu, build_info_cmd,
+						sizeof(build_info_cmd),	rb,
+						&reply_size);
+	if (ret)
+		goto err;
+	if (reply_size < 15) {
+		ret = -EIO;
+		goto err;
+	}
+	sprintf(mcu->version.build_info, "%c%c/%c%c/%.4s %c%c:%c%c",
+		rb[8], rb[9], rb[6], rb[7], &rb[2], rb[10], rb[11],
+		rb[12], rb[13]);
+
+	ret = iei_wt61p803_puzzle_write_command(mcu, bootloader_mode_cmd,
+						sizeof(bootloader_mode_cmd), rb,
+						&reply_size);
+	if (ret)
+		goto err;
+	if (reply_size < 4) {
+		ret = -EIO;
+		goto err;
+	}
+	if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS)
+		mcu->version.bootloader_mode = false;
+	else if (rb[2] == IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER)
+		mcu->version.bootloader_mode = true;
+
+	ret = iei_wt61p803_puzzle_write_command(mcu, protocol_version_cmd,
+						sizeof(protocol_version_cmd), rb,
+						&reply_size);
+	if (ret)
+		goto err;
+	if (reply_size < 9) {
+		ret = -EIO;
+		goto err;
+	}
+	sprintf(mcu->version.protocol_version, "v%c.%c%c%c%c%c",
+		rb[7], rb[6], rb[5], rb[4], rb[3], rb[2]);
+err:
+	mutex_unlock(&mcu->lock);
+	return ret;
+}
+
+static int iei_wt61p803_puzzle_get_mcu_status(struct iei_wt61p803_puzzle *mcu)
+{
+	unsigned char mcu_status_cmd[5] = {
+		IEI_WT61P803_PUZZLE_CMD_HEADER_START,
+		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER,
+		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS,
+		IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS,
+	};
+	unsigned char *resp_buf = mcu->response_buffer;
+	size_t reply_size;
+	int ret;
+
+	mutex_lock(&mcu->lock);
+	ret = iei_wt61p803_puzzle_write_command(mcu, mcu_status_cmd, sizeof(mcu_status_cmd),
+						resp_buf, &reply_size);
+	if (ret)
+		goto exit;
+	if (reply_size < 20) {
+		ret = -EIO;
+		goto exit;
+	}
+
+	/* Response format:
+	 * (IDX	RESPONSE)
+	 * 0	@
+	 * 1	O
+	 * 2	S
+	 * 3	S
+	 * ...
+	 * 5	AC Recovery Status Flag
+	 * ...
+	 * 10	Power Loss Recovery
+	 * ...
+	 * 19	Power Status (system power on method)
+	 * 20	XOR checksum
+	 */
+	if (resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
+	    resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER &&
+	    resp_buf[2] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS &&
+	    resp_buf[3] == IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS) {
+		mcu->status.ac_recovery_status_flag = resp_buf[5];
+		mcu->status.power_loss_recovery = resp_buf[10];
+		mcu->status.power_status = resp_buf[19];
+	}
+exit:
+	mutex_unlock(&mcu->lock);
+	return ret;
+}
+
+static int iei_wt61p803_puzzle_get_serial_number(struct iei_wt61p803_puzzle *mcu)
+{
+	unsigned char *resp_buf = mcu->response_buffer;
+	unsigned char serial_number_cmd[5] = {
+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
+		IEI_WT61P803_PUZZLE_CMD_EEPROM_READ,
+		0x00,	/* EEPROM read address */
+		0x24,	/* Data length */
+	};
+	size_t reply_size;
+	int ret;
+
+	mutex_lock(&mcu->lock);
+	ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd,
+						sizeof(serial_number_cmd),
+						resp_buf, &reply_size);
+	if (ret)
+		goto err;
+
+	if (reply_size < IEI_WT61P803_PUZZLE_SN_LENGTH + 4) {
+		ret = -EIO;
+		goto err;
+	}
+
+	sprintf(mcu->version.serial_number, "%.*s",
+		IEI_WT61P803_PUZZLE_SN_LENGTH, resp_buf + 4);
+err:
+	mutex_unlock(&mcu->lock);
+	return ret;
+}
+
+static int iei_wt61p803_puzzle_write_serial_number(struct iei_wt61p803_puzzle *mcu,
+						   unsigned char serial_number[36])
+{
+	unsigned char *resp_buf = mcu->response_buffer;
+	unsigned char serial_number_header[4] = {
+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
+		IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE,
+		0x00,	/* EEPROM write address */
+		0xC,	/* Data length */
+	};
+	unsigned char serial_number_cmd[4 + 12 + 1]; /* header, serial number, XOR checksum */
+	int ret, sn_counter;
+	size_t reply_size;
+
+	/* The MCU can only handle 22 byte messages, send the S/N in 12 byte chunks */
+	mutex_lock(&mcu->lock);
+	for (sn_counter = 0; sn_counter < 3; sn_counter++) {
+		serial_number_header[2] = 0x0 + 0xC * sn_counter;
+
+		memcpy(serial_number_cmd, serial_number_header, sizeof(serial_number_header));
+		memcpy(serial_number_cmd + sizeof(serial_number_header),
+		       serial_number + 0xC * sn_counter, 0xC);
+
+		ret = iei_wt61p803_puzzle_write_command(mcu, serial_number_cmd,
+							sizeof(serial_number_cmd),
+							resp_buf, &reply_size);
+		if (ret)
+			goto err;
+		if (reply_size != 3) {
+			ret = -EIO;
+			goto err;
+		}
+		if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
+		      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
+		      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
+			ret = -EPROTO;
+			goto err;
+		}
+	}
+
+	sprintf(mcu->version.serial_number, "%.*s",
+		IEI_WT61P803_PUZZLE_SN_LENGTH, serial_number);
+err:
+	mutex_unlock(&mcu->lock);
+	return ret;
+}
+
+static int iei_wt61p803_puzzle_get_mac_address(struct iei_wt61p803_puzzle *mcu, int index)
+{
+	unsigned char *resp_buf = mcu->response_buffer;
+	unsigned char mac_address_cmd[5] = {
+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
+		IEI_WT61P803_PUZZLE_CMD_EEPROM_READ,
+		0x00,	/* EEPROM read address */
+		0x11,	/* Data length */
+	};
+	size_t reply_size;
+	int ret;
+
+	mutex_lock(&mcu->lock);
+	mac_address_cmd[2] = 0x24 + 0x11 * index;
+
+	ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd,
+						sizeof(mac_address_cmd),
+						resp_buf, &reply_size);
+	if (ret)
+		goto err;
+
+	if (reply_size < 22) {
+		ret = -EIO;
+		goto err;
+	}
+
+	sprintf(mcu->version.mac_address[index], "%.*s",
+		IEI_WT61P803_PUZZLE_MAC_LENGTH, resp_buf + 4);
+err:
+	mutex_unlock(&mcu->lock);
+	return ret;
+}
+
+static int
+iei_wt61p803_puzzle_write_mac_address(struct iei_wt61p803_puzzle *mcu,
+				      unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH],
+				      int mac_address_idx)
+{
+	unsigned char mac_address_cmd[4 + IEI_WT61P803_PUZZLE_MAC_LENGTH + 1];
+	unsigned char *resp_buf = mcu->response_buffer;
+	unsigned char mac_address_header[4] = {
+		IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM,
+		IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE,
+		0x00,	/* EEPROM write address */
+		0x11,	/* Data length */
+	};
+	size_t reply_size;
+	int ret;
+
+	if (mac_address_idx < 0 || mac_address_idx >= IEI_WT61P803_PUZZLE_NB_MAC)
+		return -EINVAL;
+
+	mac_address_header[2] = 0x24 + 0x11 * mac_address_idx;
+
+	/* Concat mac_address_header, mac_address to mac_address_cmd */
+	memcpy(mac_address_cmd, mac_address_header, sizeof(mac_address_header));
+	memcpy(mac_address_cmd + sizeof(mac_address_header), mac_address,
+	       IEI_WT61P803_PUZZLE_MAC_LENGTH);
+
+	mutex_lock(&mcu->lock);
+	ret = iei_wt61p803_puzzle_write_command(mcu, mac_address_cmd,
+						sizeof(mac_address_cmd),
+						resp_buf, &reply_size);
+	if (ret)
+		goto err;
+	if (reply_size != 3) {
+		ret = -EIO;
+		goto err;
+	}
+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
+		ret = -EPROTO;
+		goto err;
+	}
+
+	sprintf(mcu->version.mac_address[mac_address_idx], "%.*s",
+		IEI_WT61P803_PUZZLE_MAC_LENGTH, mac_address);
+err:
+	mutex_unlock(&mcu->lock);
+	return ret;
+}
+
+static int iei_wt61p803_puzzle_write_power_loss_recovery(struct iei_wt61p803_puzzle *mcu,
+							 int power_loss_recovery_action)
+{
+	unsigned char *resp_buf = mcu->response_buffer;
+	unsigned char power_loss_recovery_cmd[5] = {};
+	size_t reply_size;
+	int ret;
+
+	if (power_loss_recovery_action < 0 || power_loss_recovery_action > 4)
+		return -EINVAL;
+
+	power_loss_recovery_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
+	power_loss_recovery_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER;
+	power_loss_recovery_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS;
+	power_loss_recovery_cmd[3] = hex_asc[power_loss_recovery_action];
+
+	mutex_lock(&mcu->lock);
+	ret = iei_wt61p803_puzzle_write_command(mcu, power_loss_recovery_cmd,
+						sizeof(power_loss_recovery_cmd),
+						resp_buf, &reply_size);
+	if (ret)
+		goto exit;
+	mcu->status.power_loss_recovery = power_loss_recovery_action;
+exit:
+	mutex_unlock(&mcu->lock);
+	return ret;
+}
+
+#define to_puzzle_dev_attr(_attr) \
+	container_of(_attr, struct iei_wt61p803_puzzle_device_attribute, dev_attr)
+
+static ssize_t show_output(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
+	struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr);
+	int ret;
+
+	switch (pattr->type) {
+	case IEI_WT61P803_PUZZLE_VERSION:
+		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.version);
+	case IEI_WT61P803_PUZZLE_BUILD_INFO:
+		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.build_info);
+	case IEI_WT61P803_PUZZLE_BOOTLOADER_MODE:
+		return scnprintf(buf, PAGE_SIZE, "%d\n", mcu->version.bootloader_mode);
+	case IEI_WT61P803_PUZZLE_PROTOCOL_VERSION:
+		return scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.protocol_version);
+	case IEI_WT61P803_PUZZLE_SERIAL_NUMBER:
+		ret = iei_wt61p803_puzzle_get_serial_number(mcu);
+		if (!ret)
+			ret = scnprintf(buf, PAGE_SIZE, "%s\n", mcu->version.serial_number);
+		else
+			ret = 0;
+		return ret;
+	case IEI_WT61P803_PUZZLE_MAC_ADDRESS:
+		ret = iei_wt61p803_puzzle_get_mac_address(mcu, pattr->index);
+		if (!ret)
+			ret = scnprintf(buf, PAGE_SIZE, "%s\n",
+					mcu->version.mac_address[pattr->index]);
+		else
+			ret = 0;
+		return ret;
+	case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS:
+	case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
+	case IEI_WT61P803_PUZZLE_POWER_STATUS:
+		ret = iei_wt61p803_puzzle_get_mcu_status(mcu);
+		if (ret)
+			return ret;
+
+		mutex_lock(&mcu->lock);
+		switch (pattr->type) {
+		case IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS:
+			ret = scnprintf(buf, PAGE_SIZE, "%x\n",
+					mcu->status.ac_recovery_status_flag);
+			break;
+		case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
+			ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_loss_recovery);
+			break;
+		case IEI_WT61P803_PUZZLE_POWER_STATUS:
+			ret = scnprintf(buf, PAGE_SIZE, "%x\n", mcu->status.power_status);
+			break;
+		default:
+			ret = 0;
+			break;
+		}
+		mutex_unlock(&mcu->lock);
+		return ret;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+static ssize_t store_output(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t len)
+{
+	unsigned char serial_number[IEI_WT61P803_PUZZLE_SN_LENGTH];
+	unsigned char mac_address[IEI_WT61P803_PUZZLE_MAC_LENGTH];
+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
+	struct iei_wt61p803_puzzle_device_attribute *pattr = to_puzzle_dev_attr(attr);
+	int power_loss_recovery_action = 0;
+	int ret;
+
+	switch (pattr->type) {
+	case IEI_WT61P803_PUZZLE_SERIAL_NUMBER:
+		if (len != (size_t)(IEI_WT61P803_PUZZLE_SN_LENGTH + 1))
+			return -EINVAL;
+		memcpy(serial_number, buf, sizeof(serial_number));
+		ret = iei_wt61p803_puzzle_write_serial_number(mcu, serial_number);
+		if (ret)
+			return ret;
+		return len;
+	case IEI_WT61P803_PUZZLE_MAC_ADDRESS:
+		if (len != (size_t)(IEI_WT61P803_PUZZLE_MAC_LENGTH + 1))
+			return -EINVAL;
+
+		memcpy(mac_address, buf, sizeof(mac_address));
+
+		if (strlen(attr->attr.name) != 13)
+			return -EIO;
+
+		ret = iei_wt61p803_puzzle_write_mac_address(mcu, mac_address, pattr->index);
+		if (ret)
+			return ret;
+		return len;
+	case IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY:
+		ret = kstrtoint(buf, 10, &power_loss_recovery_action);
+		if (ret)
+			return ret;
+		ret = iei_wt61p803_puzzle_write_power_loss_recovery(mcu,
+								    power_loss_recovery_action);
+		if (ret)
+			return ret;
+		return len;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#define IEI_WT61P803_PUZZLE_ATTR(_name, _mode, _show, _store, _type, _index) \
+	struct iei_wt61p803_puzzle_device_attribute dev_attr_##_name = \
+		{ .dev_attr	= __ATTR(_name, _mode, _show, _store), \
+		  .type		= _type, \
+		  .index	= _index }
+
+#define IEI_WT61P803_PUZZLE_ATTR_RO(_name, _type, _id) \
+	IEI_WT61P803_PUZZLE_ATTR(_name, 0444, show_output, NULL, _type, _id)
+
+#define IEI_WT61P803_PUZZLE_ATTR_RW(_name, _type, _id) \
+	IEI_WT61P803_PUZZLE_ATTR(_name, 0644, show_output, store_output, _type, _id)
+
+static IEI_WT61P803_PUZZLE_ATTR_RO(version, IEI_WT61P803_PUZZLE_VERSION, 0);
+static IEI_WT61P803_PUZZLE_ATTR_RO(build_info, IEI_WT61P803_PUZZLE_BUILD_INFO, 0);
+static IEI_WT61P803_PUZZLE_ATTR_RO(bootloader_mode, IEI_WT61P803_PUZZLE_BOOTLOADER_MODE, 0);
+static IEI_WT61P803_PUZZLE_ATTR_RO(protocol_version, IEI_WT61P803_PUZZLE_PROTOCOL_VERSION, 0);
+static IEI_WT61P803_PUZZLE_ATTR_RW(serial_number, IEI_WT61P803_PUZZLE_SERIAL_NUMBER, 0);
+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_0, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 0);
+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_1, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 1);
+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_2, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 2);
+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_3, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 3);
+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_4, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 4);
+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_5, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 5);
+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_6, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 6);
+static IEI_WT61P803_PUZZLE_ATTR_RW(mac_address_7, IEI_WT61P803_PUZZLE_MAC_ADDRESS, 7);
+static IEI_WT61P803_PUZZLE_ATTR_RO(ac_recovery_status, IEI_WT61P803_PUZZLE_AC_RECOVERY_STATUS, 0);
+static IEI_WT61P803_PUZZLE_ATTR_RW(power_loss_recovery, IEI_WT61P803_PUZZLE_POWER_LOSS_RECOVERY, 0);
+static IEI_WT61P803_PUZZLE_ATTR_RO(power_status, IEI_WT61P803_PUZZLE_POWER_STATUS, 0);
+
+static struct attribute *iei_wt61p803_puzzle_attrs[] = {
+	&dev_attr_version.dev_attr.attr,
+	&dev_attr_build_info.dev_attr.attr,
+	&dev_attr_bootloader_mode.dev_attr.attr,
+	&dev_attr_protocol_version.dev_attr.attr,
+	&dev_attr_serial_number.dev_attr.attr,
+	&dev_attr_mac_address_0.dev_attr.attr,
+	&dev_attr_mac_address_1.dev_attr.attr,
+	&dev_attr_mac_address_2.dev_attr.attr,
+	&dev_attr_mac_address_3.dev_attr.attr,
+	&dev_attr_mac_address_4.dev_attr.attr,
+	&dev_attr_mac_address_5.dev_attr.attr,
+	&dev_attr_mac_address_6.dev_attr.attr,
+	&dev_attr_mac_address_7.dev_attr.attr,
+	&dev_attr_ac_recovery_status.dev_attr.attr,
+	&dev_attr_power_loss_recovery.dev_attr.attr,
+	&dev_attr_power_status.dev_attr.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(iei_wt61p803_puzzle);
+
+static int iei_wt61p803_puzzle_sysfs_create(struct device *dev,
+					    struct iei_wt61p803_puzzle *mcu)
+{
+	int ret;
+
+	ret = sysfs_create_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups);
+	if (ret)
+		mfd_remove_devices(mcu->dev);
+
+	return ret;
+}
+
+static int iei_wt61p803_puzzle_sysfs_remove(struct device *dev,
+					    struct iei_wt61p803_puzzle *mcu)
+{
+	/* Remove sysfs groups */
+	sysfs_remove_groups(&mcu->dev->kobj, iei_wt61p803_puzzle_groups);
+	mfd_remove_devices(mcu->dev);
+
+	return 0;
+}
+
+static int iei_wt61p803_puzzle_probe(struct serdev_device *serdev)
+{
+	struct device *dev = &serdev->dev;
+	struct iei_wt61p803_puzzle *mcu;
+	u32 baud;
+	int ret;
+
+	/* Read the baud rate from 'current-speed', because the MCU supports different rates */
+	if (device_property_read_u32(dev, "current-speed", &baud)) {
+		dev_err(dev,
+			"'current-speed' is not specified in device node\n");
+		return -EINVAL;
+	}
+	dev_dbg(dev, "Driver baud rate: %d\n", baud);
+
+	/* Allocate the memory */
+	mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
+	if (!mcu)
+		return -ENOMEM;
+
+	mcu->reply = devm_kzalloc(dev, sizeof(*mcu->reply), GFP_KERNEL);
+	if (!mcu->reply)
+		return -ENOMEM;
+
+	/* Initialize device struct data */
+	mcu->serdev = serdev;
+	mcu->dev = dev;
+	init_completion(&mcu->reply->received);
+	mutex_init(&mcu->reply_lock);
+	mutex_init(&mcu->lock);
+
+	/* Setup UART interface */
+	serdev_device_set_drvdata(serdev, mcu);
+	serdev_device_set_client_ops(serdev, &iei_wt61p803_puzzle_serdev_device_ops);
+	ret = devm_serdev_device_open(dev, serdev);
+	if (ret)
+		return ret;
+	serdev_device_set_baudrate(serdev, baud);
+	serdev_device_set_flow_control(serdev, false);
+	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+	if (ret) {
+		dev_err(dev, "Failed to set parity\n");
+		return ret;
+	}
+
+	ret = iei_wt61p803_puzzle_get_version(mcu);
+	if (ret)
+		return ret;
+
+	dev_dbg(dev, "MCU version: %s\n", mcu->version.version);
+	dev_dbg(dev, "MCU firmware build info: %s\n", mcu->version.build_info);
+	dev_dbg(dev, "MCU in bootloader mode: %s\n",
+		mcu->version.bootloader_mode ? "true" : "false");
+	dev_dbg(dev, "MCU protocol version: %s\n", mcu->version.protocol_version);
+
+	if (device_property_read_bool(dev, "enable-beep")) {
+		ret = iei_wt61p803_puzzle_buzzer(mcu, false);
+		if (ret)
+			return ret;
+	}
+
+	ret = iei_wt61p803_puzzle_sysfs_create(dev, mcu);
+	if (ret)
+		return ret;
+
+	return devm_of_platform_populate(dev);
+}
+
+static void iei_wt61p803_puzzle_remove(struct serdev_device *serdev)
+{
+	struct device *dev = &serdev->dev;
+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev);
+
+	iei_wt61p803_puzzle_sysfs_remove(dev, mcu);
+}
+
+static const struct of_device_id iei_wt61p803_puzzle_dt_ids[] = {
+	{ .compatible = "iei,wt61p803-puzzle" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_dt_ids);
+
+static struct serdev_device_driver iei_wt61p803_puzzle_drv = {
+	.probe			= iei_wt61p803_puzzle_probe,
+	.remove			= iei_wt61p803_puzzle_remove,
+	.driver = {
+		.name		= "iei-wt61p803-puzzle",
+		.of_match_table	= iei_wt61p803_puzzle_dt_ids,
+	},
+};
+
+module_serdev_device_driver(iei_wt61p803_puzzle_drv);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU Driver");
diff --git a/include/linux/mfd/iei-wt61p803-puzzle.h b/include/linux/mfd/iei-wt61p803-puzzle.h
new file mode 100644
index 000000000000..7f2da5887dae
--- /dev/null
+++ b/include/linux/mfd/iei-wt61p803-puzzle.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* IEI WT61P803 PUZZLE MCU Driver
+ * System management microcontroller for fan control, temperature sensor reading,
+ * LED control and system identification on IEI Puzzle series ARM-based appliances.
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#ifndef _MFD_IEI_WT61P803_PUZZLE_H_
+#define _MFD_IEI_WT61P803_PUZZLE_H_
+
+#define IEI_WT61P803_PUZZLE_BUF_SIZE 512
+
+/* Command magic numbers */
+#define IEI_WT61P803_PUZZLE_CMD_HEADER_START		0x40 /* @ */
+#define IEI_WT61P803_PUZZLE_CMD_HEADER_START_OTHER	0x25 /* % */
+#define IEI_WT61P803_PUZZLE_CMD_HEADER_EEPROM		0xF7
+
+#define IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK		0x30 /* 0 */
+#define IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK	0x70
+
+#define IEI_WT61P803_PUZZLE_CMD_EEPROM_READ		0xA1
+#define IEI_WT61P803_PUZZLE_CMD_EEPROM_WRITE		0xA0
+
+#define IEI_WT61P803_PUZZLE_CMD_OTHER_VERSION		0x56 /* V */
+#define IEI_WT61P803_PUZZLE_CMD_OTHER_BUILD		0x42 /* B */
+#define IEI_WT61P803_PUZZLE_CMD_OTHER_BOOTLOADER_MODE	0x4D /* M */
+#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_BOOTLOADER	0x30
+#define IEI_WT61P803_PUZZLE_CMD_OTHER_MODE_APPS		0x31
+#define IEI_WT61P803_PUZZLE_CMD_OTHER_PROTOCOL_VERSION	0x50 /* P */
+
+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE		0x43 /* C */
+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER		0x4F /* O */
+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_STATUS	0x53 /* S */
+#define IEI_WT61P803_PUZZLE_CMD_FUNCTION_OTHER_POWER_LOSS 0x41 /* A */
+
+#define IEI_WT61P803_PUZZLE_CMD_LED			0x52 /* R */
+#define IEI_WT61P803_PUZZLE_CMD_LED_POWER		0x31 /* 1 */
+
+#define IEI_WT61P803_PUZZLE_CMD_TEMP			0x54 /* T */
+#define IEI_WT61P803_PUZZLE_CMD_TEMP_ALL		0x41 /* A */
+
+#define IEI_WT61P803_PUZZLE_CMD_FAN			0x46 /* F */
+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ		0x5A /* Z */
+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE		0x57 /* W */
+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE		0x30
+#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE		0x41 /* A */
+
+#define IEI_WT61P803_PUZZLE_CMD_FAN_PWM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_PWM_BASE + (x)) /* 0 - 1 */
+#define IEI_WT61P803_PUZZLE_CMD_FAN_RPM(x) (IEI_WT61P803_PUZZLE_CMD_FAN_RPM_BASE + (x)) /* 0 - 5 */
+
+struct iei_wt61p803_puzzle_mcu_version;
+struct iei_wt61p803_puzzle_reply;
+struct iei_wt61p803_puzzle;
+
+int iei_wt61p803_puzzle_write_command_watchdog(struct iei_wt61p803_puzzle *mcu,
+					       unsigned char *cmd, size_t size,
+					       unsigned char *reply_data, size_t *reply_size,
+					       int retry_count);
+
+int iei_wt61p803_puzzle_write_command(struct iei_wt61p803_puzzle *mcu,
+				      unsigned char *cmd, size_t size,
+				      unsigned char *reply_data, size_t *reply_size);
+
+#endif /* _MFD_IEI_WT61P803_PUZZLE_H_ */
-- 
2.31.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v8 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver
  2021-07-05 13:49 [PATCH v8 0/7] Add support for the IEI WT61P803 PUZZLE MCU Pavo Banicevic
  2021-07-05 13:49 ` [PATCH v8 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings Pavo Banicevic
  2021-07-05 13:49 ` [PATCH v8 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU Pavo Banicevic
@ 2021-07-05 13:49 ` Pavo Banicevic
  2021-07-05 16:13   ` Guenter Roeck
  2021-07-05 13:49 ` [PATCH v8 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver Pavo Banicevic
                   ` (3 subsequent siblings)
  6 siblings, 1 reply; 12+ messages in thread
From: Pavo Banicevic @ 2021-07-05 13:49 UTC (permalink / raw)
  To: linux-doc, linux-leds, devicetree, linux-hwmon, linux-kernel,
	geert+renesas, Max.Merchel, linux, daniel, shawnguo, sam, arnd,
	krzysztof.kozlowski, pavo.banicevic, corbet, lee.jones, pavel,
	robh+dt, linux, jdelvare, goran.medic, luka.perkov, luka.kovacic
  Cc: Robert Marko

From: Luka Kovacic <luka.kovacic@sartura.hr>

Add the IEI WT61P803 PUZZLE HWMON driver, that handles the fan speed
control via PWM, reading fan speed and reading on-board temperature
sensors.

The driver registers a HWMON device and a simple thermal cooling device to
enable in-kernel fan management.

This driver depends on the IEI WT61P803 PUZZLE MFD driver.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
---
 drivers/hwmon/Kconfig                     |   8 +
 drivers/hwmon/Makefile                    |   1 +
 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 413 ++++++++++++++++++++++
 3 files changed, 422 insertions(+)
 create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 87624902ea80..2c4f9c7821c6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -722,6 +722,14 @@ config SENSORS_IBMPOWERNV
 	  This driver can also be built as a module. If so, the module
 	  will be called ibmpowernv.
 
+config SENSORS_IEI_WT61P803_PUZZLE_HWMON
+	tristate "IEI WT61P803 PUZZLE MFD HWMON Driver"
+	depends on MFD_IEI_WT61P803_PUZZLE
+	help
+	  The IEI WT61P803 PUZZLE MFD HWMON Driver handles reading fan speed
+	  and writing fan PWM values. It also supports reading on-board
+	  temperature sensors.
+
 config SENSORS_IIO_HWMON
 	tristate "Hwmon driver that uses channels specified via iio maps"
 	depends on IIO
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 59e78bc212cf..efb9f9826c6d 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -84,6 +84,7 @@ obj-$(CONFIG_SENSORS_HIH6130)	+= hih6130.o
 obj-$(CONFIG_SENSORS_ULTRA45)	+= ultra45_env.o
 obj-$(CONFIG_SENSORS_I5500)	+= i5500_temp.o
 obj-$(CONFIG_SENSORS_I5K_AMB)	+= i5k_amb.o
+obj-$(CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON) += iei-wt61p803-puzzle-hwmon.o
 obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o
 obj-$(CONFIG_SENSORS_IBMPEX)	+= ibmpex.o
 obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
diff --git a/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
new file mode 100644
index 000000000000..3a895ca08474
--- /dev/null
+++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* IEI WT61P803 PUZZLE MCU HWMON Driver
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/math64.h>
+#include <linux/mfd/iei-wt61p803-puzzle.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM	2
+#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL	255
+
+/**
+ * struct iei_wt61p803_puzzle_thermal_cooling_device - Thermal cooling device instance
+ * @mcu_hwmon:		Parent driver struct pointer
+ * @tcdev:		Thermal cooling device pointer
+ * @name:		Thermal cooling device name
+ * @pwm_channel:	Controlled PWM channel (0 or 1)
+ * @cooling_levels:	Thermal cooling device cooling levels (DT)
+ */
+struct iei_wt61p803_puzzle_thermal_cooling_device {
+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
+	struct thermal_cooling_device *tcdev;
+	char name[THERMAL_NAME_LENGTH];
+	int pwm_channel;
+	u8 *cooling_levels;
+};
+
+/**
+ * struct iei_wt61p803_puzzle_hwmon - MCU HWMON Driver
+ * @mcu:				MCU struct pointer
+ * @response_buffer			Global MCU response buffer
+ * @thermal_cooling_dev_present:	Per-channel thermal cooling device control indicator
+ * @cdev:				Per-channel thermal cooling device private structure
+ */
+struct iei_wt61p803_puzzle_hwmon {
+	struct iei_wt61p803_puzzle *mcu;
+	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
+	bool thermal_cooling_dev_present[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
+	struct iei_wt61p803_puzzle_thermal_cooling_device
+		*cdev[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
+	struct mutex lock; /* mutex to protect response_buffer array */
+};
+
+#define raw_temp_to_milidegree_celsius(x) (((x) - 0x80) * 1000)
+static int iei_wt61p803_puzzle_read_temp_sensor(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
+						int channel, long *value)
+{
+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
+	unsigned char temp_sensor_ntc_cmd[4] = {
+		IEI_WT61P803_PUZZLE_CMD_HEADER_START,
+		IEI_WT61P803_PUZZLE_CMD_TEMP,
+		IEI_WT61P803_PUZZLE_CMD_TEMP_ALL,
+	};
+	size_t reply_size;
+	int ret;
+
+	mutex_lock(&mcu_hwmon->lock);
+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, temp_sensor_ntc_cmd,
+						sizeof(temp_sensor_ntc_cmd), resp_buf,
+						&reply_size);
+	if (ret)
+		goto exit;
+
+	if (reply_size != 7) {
+		ret = -EIO;
+		goto exit;
+	}
+
+	/* Check the number of NTC values */
+	if (resp_buf[3] != '2') {
+		ret = -EIO;
+		goto exit;
+	}
+
+	*value = raw_temp_to_milidegree_celsius(resp_buf[4 + channel]);
+exit:
+	mutex_unlock(&mcu_hwmon->lock);
+	return ret;
+}
+
+#define raw_fan_val_to_rpm(x, y) ((((x) << 8 | (y)) / 2) * 60)
+static int iei_wt61p803_puzzle_read_fan_speed(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
+					      int channel, long *value)
+{
+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
+	unsigned char fan_speed_cmd[4] = {};
+	size_t reply_size;
+	int ret;
+
+	fan_speed_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
+	fan_speed_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
+	fan_speed_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_RPM(channel);
+
+	mutex_lock(&mcu_hwmon->lock);
+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, fan_speed_cmd,
+						sizeof(fan_speed_cmd), resp_buf,
+						&reply_size);
+	if (ret)
+		goto exit;
+
+	if (reply_size != 7) {
+		ret = -EIO;
+		goto exit;
+	}
+
+	*value = raw_fan_val_to_rpm(resp_buf[3], resp_buf[4]);
+exit:
+	mutex_unlock(&mcu_hwmon->lock);
+	return ret;
+}
+
+static int iei_wt61p803_puzzle_write_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
+						 int channel, long pwm_set_val)
+{
+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
+	unsigned char pwm_set_cmd[6] = {};
+	size_t reply_size;
+	int ret;
+
+	pwm_set_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
+	pwm_set_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
+	pwm_set_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE;
+	pwm_set_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
+	pwm_set_cmd[4] = pwm_set_val;
+
+	mutex_lock(&mcu_hwmon->lock);
+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_set_cmd,
+						sizeof(pwm_set_cmd), resp_buf,
+						&reply_size);
+	if (ret)
+		goto exit;
+
+	if (reply_size != 3) {
+		ret = -EIO;
+		goto exit;
+	}
+
+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
+		ret = -EIO;
+		goto exit;
+	}
+exit:
+	mutex_unlock(&mcu_hwmon->lock);
+	return ret;
+}
+
+static int iei_wt61p803_puzzle_read_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
+						int channel, long *value)
+{
+	unsigned char *resp_buf = mcu_hwmon->response_buffer;
+	unsigned char pwm_get_cmd[5] = {};
+	size_t reply_size;
+	int ret;
+
+	pwm_get_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
+	pwm_get_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
+	pwm_get_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ;
+	pwm_get_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
+
+	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_get_cmd,
+						sizeof(pwm_get_cmd), resp_buf,
+						&reply_size);
+	if (ret)
+		return ret;
+
+	if (reply_size != 5)
+		return -EIO;
+
+	if (resp_buf[2] != IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ)
+		return -EIO;
+
+	*value = resp_buf[3];
+
+	return 0;
+}
+
+static int iei_wt61p803_puzzle_read(struct device *dev, enum hwmon_sensor_types type,
+				    u32 attr, int channel, long *val)
+{
+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
+
+	switch (type) {
+	case hwmon_pwm:
+		return iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, channel, val);
+	case hwmon_fan:
+		return iei_wt61p803_puzzle_read_fan_speed(mcu_hwmon, channel, val);
+	case hwmon_temp:
+		return iei_wt61p803_puzzle_read_temp_sensor(mcu_hwmon, channel, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int iei_wt61p803_puzzle_write(struct device *dev, enum hwmon_sensor_types type,
+				     u32 attr, int channel, long val)
+{
+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
+
+	return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, channel, val);
+}
+
+static umode_t iei_wt61p803_puzzle_is_visible(const void *data, enum hwmon_sensor_types type,
+					      u32 attr, int channel)
+{
+	const struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = data;
+
+	switch (type) {
+	case hwmon_pwm:
+		if (mcu_hwmon->thermal_cooling_dev_present[channel])
+			return 0444;
+		if (attr == hwmon_pwm_input)
+			return 0644;
+		break;
+	case hwmon_fan:
+		if (attr == hwmon_fan_input)
+			return 0444;
+		break;
+	case hwmon_temp:
+		if (attr == hwmon_temp_input)
+			return 0444;
+		break;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+static const struct hwmon_ops iei_wt61p803_puzzle_hwmon_ops = {
+	.is_visible = iei_wt61p803_puzzle_is_visible,
+	.read = iei_wt61p803_puzzle_read,
+	.write = iei_wt61p803_puzzle_write,
+};
+
+static const struct hwmon_channel_info *iei_wt61p803_puzzle_info[] = {
+	HWMON_CHANNEL_INFO(pwm,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT),
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT),
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_chip_info iei_wt61p803_puzzle_chip_info = {
+	.ops = &iei_wt61p803_puzzle_hwmon_ops,
+	.info = iei_wt61p803_puzzle_info,
+};
+
+static int iei_wt61p803_puzzle_get_max_state(struct thermal_cooling_device *tcdev,
+					     unsigned long *state)
+{
+	*state = IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL;
+
+	return 0;
+}
+
+static int iei_wt61p803_puzzle_get_cur_state(struct thermal_cooling_device *tcdev,
+					     unsigned long *state)
+{
+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
+	long value;
+	int ret;
+
+	ret = iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, cdev->pwm_channel, &value);
+	if (ret)
+		return ret;
+	*state = value;
+	return 0;
+}
+
+static int iei_wt61p803_puzzle_set_cur_state(struct thermal_cooling_device *tcdev,
+					     unsigned long state)
+{
+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
+
+	return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, cdev->pwm_channel, state);
+}
+
+static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = {
+	.get_max_state = iei_wt61p803_puzzle_get_max_state,
+	.get_cur_state = iei_wt61p803_puzzle_get_cur_state,
+	.set_cur_state = iei_wt61p803_puzzle_set_cur_state,
+};
+
+static int
+iei_wt61p803_puzzle_enable_thermal_cooling_dev(struct device *dev,
+					       struct fwnode_handle *child,
+					       struct iei_wt61p803_puzzle_hwmon *mcu_hwmon)
+{
+	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev;
+	u32 pwm_channel;
+	u8 num_levels;
+	int ret;
+
+	ret = fwnode_property_read_u32(child, "reg", &pwm_channel);
+	if (ret)
+		return ret;
+
+	mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true;
+
+	num_levels = fwnode_property_count_u8(child, "cooling-levels");
+	if (!num_levels)
+		return -EINVAL;
+
+	cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return -ENOMEM;
+
+	cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u8), GFP_KERNEL);
+	if (!cdev->cooling_levels)
+		return -ENOMEM;
+
+	ret = fwnode_property_read_u8_array(child, "cooling-levels",
+					    cdev->cooling_levels,
+					    num_levels);
+	if (ret) {
+		dev_err(dev, "Couldn't read property 'cooling-levels'\n");
+		return ret;
+	}
+
+	snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel);
+	cdev->tcdev = devm_thermal_of_cooling_device_register(dev, NULL, cdev->name, cdev,
+							      &iei_wt61p803_puzzle_cooling_ops);
+	if (IS_ERR(cdev->tcdev))
+		return PTR_ERR(cdev->tcdev);
+
+	cdev->mcu_hwmon = mcu_hwmon;
+	cdev->pwm_channel = pwm_channel;
+	mcu_hwmon->cdev[pwm_channel] = cdev;
+
+	return 0;
+}
+
+static int iei_wt61p803_puzzle_hwmon_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
+	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
+	struct fwnode_handle *child;
+	struct device *hwmon_dev;
+	int ret;
+
+	mcu_hwmon = devm_kzalloc(dev, sizeof(*mcu_hwmon), GFP_KERNEL);
+	if (!mcu_hwmon)
+		return -ENOMEM;
+
+	mcu_hwmon->mcu = mcu;
+	platform_set_drvdata(pdev, mcu_hwmon);
+	mutex_init(&mcu_hwmon->lock);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "iei_wt61p803_puzzle",
+							 mcu_hwmon,
+							 &iei_wt61p803_puzzle_chip_info,
+							 NULL);
+	if (IS_ERR(hwmon_dev))
+		return PTR_ERR(hwmon_dev);
+
+	/* Control fans via PWM lines via Linux Kernel */
+	if (IS_ENABLED(CONFIG_THERMAL)) {
+		device_for_each_child_node(dev, child) {
+			ret = iei_wt61p803_puzzle_enable_thermal_cooling_dev(dev, child, mcu_hwmon);
+			if (ret) {
+				dev_err(dev, "Enabling the PWM fan failed\n");
+				fwnode_handle_put(child);
+				return ret;
+			}
+		}
+	}
+	return 0;
+}
+
+static const struct of_device_id iei_wt61p803_puzzle_hwmon_id_table[] = {
+	{ .compatible = "iei,wt61p803-puzzle-hwmon" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_hwmon_id_table);
+
+static struct platform_driver iei_wt61p803_puzzle_hwmon_driver = {
+	.driver = {
+		.name = "iei-wt61p803-puzzle-hwmon",
+		.of_match_table = iei_wt61p803_puzzle_hwmon_id_table,
+	},
+	.probe = iei_wt61p803_puzzle_hwmon_probe,
+};
+
+module_platform_driver(iei_wt61p803_puzzle_hwmon_driver);
+
+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU HWMON Driver");
+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
+MODULE_LICENSE("GPL v2");
-- 
2.31.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v8 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver
  2021-07-05 13:49 [PATCH v8 0/7] Add support for the IEI WT61P803 PUZZLE MCU Pavo Banicevic
                   ` (2 preceding siblings ...)
  2021-07-05 13:49 ` [PATCH v8 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver Pavo Banicevic
@ 2021-07-05 13:49 ` Pavo Banicevic
  2021-07-05 13:49 ` [PATCH v8 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation Pavo Banicevic
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 12+ messages in thread
From: Pavo Banicevic @ 2021-07-05 13:49 UTC (permalink / raw)
  To: linux-doc, linux-leds, devicetree, linux-hwmon, linux-kernel,
	geert+renesas, Max.Merchel, linux, daniel, shawnguo, sam, arnd,
	krzysztof.kozlowski, pavo.banicevic, corbet, lee.jones, pavel,
	robh+dt, linux, jdelvare, goran.medic, luka.perkov, luka.kovacic
  Cc: Robert Marko

From: Luka Kovacic <luka.kovacic@sartura.hr>

Add support for the IEI WT61P803 PUZZLE LED driver.
Currently only the front panel power LED is supported,
since it is the only LED on this board wired through the
MCU.

The LED is wired directly to the on-board MCU controller
and is toggled using an MCU command.

Support for more LEDs is going to be added in case more
boards implement this microcontroller, as LEDs use many
different GPIOs.

This driver depends on the IEI WT61P803 PUZZLE MFD driver.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
---
 drivers/leds/Kconfig                    |   8 ++
 drivers/leds/Makefile                   |   1 +
 drivers/leds/leds-iei-wt61p803-puzzle.c | 156 ++++++++++++++++++++++++
 3 files changed, 165 insertions(+)
 create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 49d99cb084db..b6e6c6bc41ec 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -332,6 +332,14 @@ config LEDS_IPAQ_MICRO
 	  Choose this option if you want to use the notification LED on
 	  Compaq/HP iPAQ h3100 and h3600.
 
+config LEDS_IEI_WT61P803_PUZZLE
+	tristate "LED Support for the IEI WT61P803 PUZZLE MCU"
+	depends on LEDS_CLASS
+	depends on MFD_IEI_WT61P803_PUZZLE
+	help
+	  This option enables support for LEDs controlled by the IEI WT61P803
+	  M801 MCU.
+
 config LEDS_HP6XX
 	tristate "LED Support for the HP Jornada 6xx"
 	depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 7e604d3028c8..2cae3d7e5b1b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
 obj-$(CONFIG_LEDS_IP30)			+= leds-ip30.o
 obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o
+obj-$(CONFIG_LEDS_IEI_WT61P803_PUZZLE)	+= leds-iei-wt61p803-puzzle.o
 obj-$(CONFIG_LEDS_IS31FL319X)		+= leds-is31fl319x.o
 obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
 obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
diff --git a/drivers/leds/leds-iei-wt61p803-puzzle.c b/drivers/leds/leds-iei-wt61p803-puzzle.c
new file mode 100644
index 000000000000..16beee7e5cd5
--- /dev/null
+++ b/drivers/leds/leds-iei-wt61p803-puzzle.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* IEI WT61P803 PUZZLE MCU LED Driver
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include <linux/leds.h>
+#include <linux/mfd/iei-wt61p803-puzzle.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+enum iei_wt61p803_puzzle_led_state {
+	IEI_LED_OFF = 0x30,
+	IEI_LED_ON = 0x31,
+	IEI_LED_BLINK_5HZ = 0x32,
+	IEI_LED_BLINK_1HZ = 0x33,
+};
+
+/**
+ * struct iei_wt61p803_puzzle_led - MCU LED Driver
+ * @cdev:		LED classdev
+ * @mcu:		MCU struct pointer
+ * @response_buffer	Global MCU response buffer
+ * @lock:		General mutex lock to protect simultaneous R/W access to led_power_state
+ * @led_power_state:	State of the front panel power LED
+ */
+struct iei_wt61p803_puzzle_led {
+	struct led_classdev cdev;
+	struct iei_wt61p803_puzzle *mcu;
+	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
+	struct mutex lock /* mutex to protect led_power_state */;
+	int led_power_state;
+};
+
+static inline struct iei_wt61p803_puzzle_led *cdev_to_iei_wt61p803_puzzle_led
+	(struct led_classdev *led_cdev)
+{
+	return container_of(led_cdev, struct iei_wt61p803_puzzle_led, cdev);
+}
+
+static int iei_wt61p803_puzzle_led_brightness_set_blocking(struct led_classdev *cdev,
+							   enum led_brightness brightness)
+{
+	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
+	unsigned char *resp_buf = priv->response_buffer;
+	unsigned char led_power_cmd[5] = {};
+	size_t reply_size;
+	int ret;
+
+	led_power_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
+	led_power_cmd[1] = IEI_WT61P803_PUZZLE_CMD_LED;
+	led_power_cmd[2] = IEI_WT61P803_PUZZLE_CMD_LED_POWER;
+	led_power_cmd[3] = brightness == LED_OFF ? IEI_LED_OFF : IEI_LED_ON;
+
+	ret = iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd,
+						sizeof(led_power_cmd),
+						resp_buf,
+						&reply_size);
+	if (ret)
+		return ret;
+
+	if (reply_size != 3)
+		return -EIO;
+
+	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
+	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
+	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK))
+		return -EIO;
+
+	mutex_lock(&priv->lock);
+	priv->led_power_state = brightness;
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static enum led_brightness iei_wt61p803_puzzle_led_brightness_get(struct led_classdev *cdev)
+{
+	struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
+	int led_state;
+
+	mutex_lock(&priv->lock);
+	led_state = priv->led_power_state;
+	mutex_unlock(&priv->lock);
+
+	return led_state;
+}
+
+static int iei_wt61p803_puzzle_led_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
+	struct iei_wt61p803_puzzle_led *priv;
+	struct led_init_data init_data = {};
+	struct fwnode_handle *child;
+	int ret;
+	u32 reg;
+
+	if (device_get_child_node_count(dev) != 1)
+		return -EINVAL;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->mcu = mcu;
+	priv->led_power_state = 1;
+	mutex_init(&priv->lock);
+	dev_set_drvdata(dev, priv);
+
+	child = device_get_next_child_node(dev, NULL);
+	ret = fwnode_property_read_u32(child, "reg", &reg);
+	if (ret || reg > 1) {
+		dev_err(dev, "Could not register 'reg' (%u)\n", reg);
+		ret = -EINVAL;
+		goto err_child_node;
+	}
+
+	priv->cdev.brightness_set_blocking = iei_wt61p803_puzzle_led_brightness_set_blocking;
+	priv->cdev.brightness_get = iei_wt61p803_puzzle_led_brightness_get;
+	priv->cdev.max_brightness = 1;
+	init_data.fwnode = child;
+
+	ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
+	if (ret) {
+		dev_err(dev, "Could not register LED\n");
+		goto err_child_node;
+	}
+err_child_node:
+	fwnode_handle_put(child);
+	return ret;
+}
+
+static const struct of_device_id iei_wt61p803_puzzle_led_of_match[] = {
+	{ .compatible = "iei,wt61p803-puzzle-leds" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_led_of_match);
+
+static struct platform_driver iei_wt61p803_puzzle_led_driver = {
+	.driver = {
+		.name = "iei-wt61p803-puzzle-led",
+		.of_match_table = iei_wt61p803_puzzle_led_of_match,
+	},
+	.probe = iei_wt61p803_puzzle_led_probe,
+};
+module_platform_driver(iei_wt61p803_puzzle_led_driver);
+
+MODULE_DESCRIPTION("IEI WT61P803 PUZZLE front panel LED driver");
+MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:leds-iei-wt61p803-puzzle");
-- 
2.31.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v8 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation
  2021-07-05 13:49 [PATCH v8 0/7] Add support for the IEI WT61P803 PUZZLE MCU Pavo Banicevic
                   ` (3 preceding siblings ...)
  2021-07-05 13:49 ` [PATCH v8 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver Pavo Banicevic
@ 2021-07-05 13:49 ` Pavo Banicevic
  2021-07-05 13:49 ` [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation Pavo Banicevic
  2021-07-05 13:49 ` [PATCH v8 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE driver Pavo Banicevic
  6 siblings, 0 replies; 12+ messages in thread
From: Pavo Banicevic @ 2021-07-05 13:49 UTC (permalink / raw)
  To: linux-doc, linux-leds, devicetree, linux-hwmon, linux-kernel,
	geert+renesas, Max.Merchel, linux, daniel, shawnguo, sam, arnd,
	krzysztof.kozlowski, pavo.banicevic, corbet, lee.jones, pavel,
	robh+dt, linux, jdelvare, goran.medic, luka.perkov, luka.kovacic
  Cc: Robert Marko

From: Luka Kovacic <luka.kovacic@sartura.hr>

Add the iei-wt61p803-puzzle driver sysfs interface documentation to allow
monitoring and control of the microcontroller from user space.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
---
 .../testing/sysfs-driver-iei-wt61p803-puzzle  | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle

diff --git a/Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle b/Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
new file mode 100644
index 000000000000..ab4415587f67
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle
@@ -0,0 +1,61 @@
+What:		/sys/bus/serial/devices/.../mac_address_*
+Date:		September 2020
+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
+Description:	(RW) Internal factory assigned MAC address values
+
+What:		/sys/bus/serial/devices/.../serial_number
+Date:		September 2020
+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
+Description:	(RW) Internal factory assigned serial number
+
+What:		/sys/bus/serial/devices/.../version
+Date:		September 2020
+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
+Description:	(RO) Internal MCU firmware version
+
+What:		/sys/bus/serial/devices/.../protocol_version
+Date:		September 2020
+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
+Description:	(RO) Internal MCU communication protocol version
+
+What:		/sys/bus/serial/devices/.../power_loss_recovery
+Date:		September 2020
+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
+Description:	(RW) Host platform power loss recovery settings
+		Value mapping: 0 - Always-On, 1 - Always-Off, 2 - Always-AC, 3 - Always-WA
+
+What:		/sys/bus/serial/devices/.../bootloader_mode
+Date:		September 2020
+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
+Description:	(RO) Internal MCU bootloader mode status
+		Value mapping:
+		0 - normal mode
+		1 - bootloader mode
+
+What:		/sys/bus/serial/devices/.../power_status
+Date:		September 2020
+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
+Description:	(RO) Power status indicates the host platform power on method.
+		Value mapping (bitwise list):
+		0x80 - Null
+		0x40 - Firmware flag
+		0x20 - Power loss detection flag (powered off)
+		0x10 - Power loss detection flag (AC mode)
+		0x08 - Button power on
+		0x04 - Wake-on-LAN power on
+		0x02 - RTC alarm power on
+		0x01 - AC recover power on
+
+What:		/sys/bus/serial/devices/.../build_info
+Date:		September 2020
+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
+Description:	(RO) Internal MCU firmware build date
+		Format: yyyy/mm/dd hh:mm
+
+What:		/sys/bus/serial/devices/.../ac_recovery_status
+Date:		September 2020
+Contact:	Luka Kovacic <luka.kovacic@sartura.hr>
+Description:	(RO) Host platform AC recovery status value
+		Value mapping:
+		0 - board has not been recovered from power down
+		1 - board has been recovered from power down
-- 
2.31.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation
  2021-07-05 13:49 [PATCH v8 0/7] Add support for the IEI WT61P803 PUZZLE MCU Pavo Banicevic
                   ` (4 preceding siblings ...)
  2021-07-05 13:49 ` [PATCH v8 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation Pavo Banicevic
@ 2021-07-05 13:49 ` Pavo Banicevic
  2021-07-05 16:14   ` Guenter Roeck
  2021-07-05 13:49 ` [PATCH v8 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE driver Pavo Banicevic
  6 siblings, 1 reply; 12+ messages in thread
From: Pavo Banicevic @ 2021-07-05 13:49 UTC (permalink / raw)
  To: linux-doc, linux-leds, devicetree, linux-hwmon, linux-kernel,
	geert+renesas, Max.Merchel, linux, daniel, shawnguo, sam, arnd,
	krzysztof.kozlowski, pavo.banicevic, corbet, lee.jones, pavel,
	robh+dt, linux, jdelvare, goran.medic, luka.perkov, luka.kovacic
  Cc: Robert Marko

From: Luka Kovacic <luka.kovacic@sartura.hr>

Add the iei-wt61p803-puzzle driver hwmon driver interface documentation.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
---
 .../hwmon/iei-wt61p803-puzzle-hwmon.rst       | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst

diff --git a/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
new file mode 100644
index 000000000000..04b01e53760c
--- /dev/null
+++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver iei-wt61p803-puzzle-hwmon
+=======================================
+
+Supported chips:
+ * IEI WT61P803 PUZZLE for IEI Puzzle M801
+
+   Prefix: 'iei-wt61p803-puzzle-hwmon'
+
+Author: Luka Kovacic <luka.kovacic@sartura.hr>
+
+
+Description
+-----------
+
+This driver adds fan and temperature sensor reading for some IEI Puzzle
+series boards.
+
+Sysfs attributes
+----------------
+
+The following attributes are supported:
+
+- IEI WT61P803 PUZZLE for IEI Puzzle M801
+
+/sys files in hwmon subsystem
+-----------------------------
+
+================= == ===================================================
+fan[1-5]_input    RO files for fan speed (in RPM)
+pwm[1-2]          RW files for fan[1-2] target duty cycle (0..255)
+================= == ===================================================
+
+/sys files in thermal subsystem
+-------------------------------
+
+================= == ====================================================
+cur_state         RW file for current cooling state of the cooling device
+                     (0..max_state)
+max_state         RO file for maximum cooling state of the cooling device
+================= == ====================================================
-- 
2.31.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v8 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE driver
  2021-07-05 13:49 [PATCH v8 0/7] Add support for the IEI WT61P803 PUZZLE MCU Pavo Banicevic
                   ` (5 preceding siblings ...)
  2021-07-05 13:49 ` [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation Pavo Banicevic
@ 2021-07-05 13:49 ` Pavo Banicevic
  6 siblings, 0 replies; 12+ messages in thread
From: Pavo Banicevic @ 2021-07-05 13:49 UTC (permalink / raw)
  To: linux-doc, linux-leds, devicetree, linux-hwmon, linux-kernel,
	geert+renesas, Max.Merchel, linux, daniel, shawnguo, sam, arnd,
	krzysztof.kozlowski, pavo.banicevic, corbet, lee.jones, pavel,
	robh+dt, linux, jdelvare, goran.medic, luka.perkov, luka.kovacic
  Cc: Robert Marko

From: Luka Kovacic <luka.kovacic@sartura.hr>

Add an entry for the IEI WT61P803 PUZZLE driver (MFD, HWMON, LED drivers).

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
---
 MAINTAINERS | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0cce91cd5624..bc6d0a23658d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8827,6 +8827,22 @@ F:	include/net/nl802154.h
 F:	net/ieee802154/
 F:	net/mac802154/
 
+IEI WT61P803 M801 MFD DRIVER
+M:	Luka Kovacic <luka.kovacic@sartura.hr>
+M:	Luka Perkov <luka.perkov@sartura.hr>
+M:	Goran Medic <goran.medic@sartura.hr>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle
+F:	Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
+F:	Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
+F:	Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
+F:	Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
+F:	drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
+F:	drivers/leds/leds-iei-wt61p803-puzzle.c
+F:	drivers/mfd/iei-wt61p803-puzzle.c
+F:	include/linux/mfd/iei-wt61p803-puzzle.h
+
 IFE PROTOCOL
 M:	Yotam Gigi <yotam.gi@gmail.com>
 M:	Jamal Hadi Salim <jhs@mojatatu.com>
-- 
2.31.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v8 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver
  2021-07-05 13:49 ` [PATCH v8 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver Pavo Banicevic
@ 2021-07-05 16:13   ` Guenter Roeck
  0 siblings, 0 replies; 12+ messages in thread
From: Guenter Roeck @ 2021-07-05 16:13 UTC (permalink / raw)
  To: Pavo Banicevic, linux-doc, linux-leds, devicetree, linux-hwmon,
	linux-kernel, geert+renesas, Max.Merchel, linux, daniel,
	shawnguo, sam, arnd, krzysztof.kozlowski, corbet, lee.jones,
	pavel, robh+dt, jdelvare, goran.medic, luka.perkov, luka.kovacic
  Cc: Robert Marko

On 7/5/21 6:49 AM, Pavo Banicevic wrote:
> From: Luka Kovacic <luka.kovacic@sartura.hr>
> 
> Add the IEI WT61P803 PUZZLE HWMON driver, that handles the fan speed
> control via PWM, reading fan speed and reading on-board temperature
> sensors.
> 
> The driver registers a HWMON device and a simple thermal cooling device to
> enable in-kernel fan management.
> 
> This driver depends on the IEI WT61P803 PUZZLE MFD driver.
> 
> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
> Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
> Cc: Luka Perkov <luka.perkov@sartura.hr>
> Cc: Robert Marko <robert.marko@sartura.hr>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   drivers/hwmon/Kconfig                     |   8 +
>   drivers/hwmon/Makefile                    |   1 +
>   drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 413 ++++++++++++++++++++++
>   3 files changed, 422 insertions(+)
>   create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 87624902ea80..2c4f9c7821c6 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -722,6 +722,14 @@ config SENSORS_IBMPOWERNV
>   	  This driver can also be built as a module. If so, the module
>   	  will be called ibmpowernv.
>   
> +config SENSORS_IEI_WT61P803_PUZZLE_HWMON
> +	tristate "IEI WT61P803 PUZZLE MFD HWMON Driver"
> +	depends on MFD_IEI_WT61P803_PUZZLE
> +	help
> +	  The IEI WT61P803 PUZZLE MFD HWMON Driver handles reading fan speed
> +	  and writing fan PWM values. It also supports reading on-board
> +	  temperature sensors.
> +
>   config SENSORS_IIO_HWMON
>   	tristate "Hwmon driver that uses channels specified via iio maps"
>   	depends on IIO
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 59e78bc212cf..efb9f9826c6d 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -84,6 +84,7 @@ obj-$(CONFIG_SENSORS_HIH6130)	+= hih6130.o
>   obj-$(CONFIG_SENSORS_ULTRA45)	+= ultra45_env.o
>   obj-$(CONFIG_SENSORS_I5500)	+= i5500_temp.o
>   obj-$(CONFIG_SENSORS_I5K_AMB)	+= i5k_amb.o
> +obj-$(CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON) += iei-wt61p803-puzzle-hwmon.o
>   obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o
>   obj-$(CONFIG_SENSORS_IBMPEX)	+= ibmpex.o
>   obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
> diff --git a/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
> new file mode 100644
> index 000000000000..3a895ca08474
> --- /dev/null
> +++ b/drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
> @@ -0,0 +1,413 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/* IEI WT61P803 PUZZLE MCU HWMON Driver
> + *
> + * Copyright (C) 2020 Sartura Ltd.
> + * Author: Luka Kovacic <luka.kovacic@sartura.hr>
> + */
> +
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/math64.h>
> +#include <linux/mfd/iei-wt61p803-puzzle.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/slab.h>
> +#include <linux/thermal.h>
> +
> +#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM	2
> +#define IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL	255
> +
> +/**
> + * struct iei_wt61p803_puzzle_thermal_cooling_device - Thermal cooling device instance
> + * @mcu_hwmon:		Parent driver struct pointer
> + * @tcdev:		Thermal cooling device pointer
> + * @name:		Thermal cooling device name
> + * @pwm_channel:	Controlled PWM channel (0 or 1)
> + * @cooling_levels:	Thermal cooling device cooling levels (DT)
> + */
> +struct iei_wt61p803_puzzle_thermal_cooling_device {
> +	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
> +	struct thermal_cooling_device *tcdev;
> +	char name[THERMAL_NAME_LENGTH];
> +	int pwm_channel;
> +	u8 *cooling_levels;
> +};
> +
> +/**
> + * struct iei_wt61p803_puzzle_hwmon - MCU HWMON Driver
> + * @mcu:				MCU struct pointer
> + * @response_buffer			Global MCU response buffer
> + * @thermal_cooling_dev_present:	Per-channel thermal cooling device control indicator
> + * @cdev:				Per-channel thermal cooling device private structure
> + */
> +struct iei_wt61p803_puzzle_hwmon {
> +	struct iei_wt61p803_puzzle *mcu;
> +	unsigned char response_buffer[IEI_WT61P803_PUZZLE_BUF_SIZE];
> +	bool thermal_cooling_dev_present[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
> +	struct iei_wt61p803_puzzle_thermal_cooling_device
> +		*cdev[IEI_WT61P803_PUZZLE_HWMON_MAX_PWM];
> +	struct mutex lock; /* mutex to protect response_buffer array */
> +};
> +
> +#define raw_temp_to_milidegree_celsius(x) (((x) - 0x80) * 1000)
> +static int iei_wt61p803_puzzle_read_temp_sensor(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
> +						int channel, long *value)
> +{
> +	unsigned char *resp_buf = mcu_hwmon->response_buffer;
> +	unsigned char temp_sensor_ntc_cmd[4] = {
> +		IEI_WT61P803_PUZZLE_CMD_HEADER_START,
> +		IEI_WT61P803_PUZZLE_CMD_TEMP,
> +		IEI_WT61P803_PUZZLE_CMD_TEMP_ALL,
> +	};
> +	size_t reply_size;
> +	int ret;
> +
> +	mutex_lock(&mcu_hwmon->lock);
> +	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, temp_sensor_ntc_cmd,
> +						sizeof(temp_sensor_ntc_cmd), resp_buf,
> +						&reply_size);
> +	if (ret)
> +		goto exit;
> +
> +	if (reply_size != 7) {
> +		ret = -EIO;
> +		goto exit;
> +	}
> +
> +	/* Check the number of NTC values */
> +	if (resp_buf[3] != '2') {
> +		ret = -EIO;
> +		goto exit;
> +	}
> +
> +	*value = raw_temp_to_milidegree_celsius(resp_buf[4 + channel]);
> +exit:
> +	mutex_unlock(&mcu_hwmon->lock);
> +	return ret;
> +}
> +
> +#define raw_fan_val_to_rpm(x, y) ((((x) << 8 | (y)) / 2) * 60)
> +static int iei_wt61p803_puzzle_read_fan_speed(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
> +					      int channel, long *value)
> +{
> +	unsigned char *resp_buf = mcu_hwmon->response_buffer;
> +	unsigned char fan_speed_cmd[4] = {};
> +	size_t reply_size;
> +	int ret;
> +
> +	fan_speed_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
> +	fan_speed_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
> +	fan_speed_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_RPM(channel);
> +
> +	mutex_lock(&mcu_hwmon->lock);
> +	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, fan_speed_cmd,
> +						sizeof(fan_speed_cmd), resp_buf,
> +						&reply_size);
> +	if (ret)
> +		goto exit;
> +
> +	if (reply_size != 7) {
> +		ret = -EIO;
> +		goto exit;
> +	}
> +
> +	*value = raw_fan_val_to_rpm(resp_buf[3], resp_buf[4]);
> +exit:
> +	mutex_unlock(&mcu_hwmon->lock);
> +	return ret;
> +}
> +
> +static int iei_wt61p803_puzzle_write_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
> +						 int channel, long pwm_set_val)
> +{
> +	unsigned char *resp_buf = mcu_hwmon->response_buffer;
> +	unsigned char pwm_set_cmd[6] = {};
> +	size_t reply_size;
> +	int ret;
> +
> +	pwm_set_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
> +	pwm_set_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
> +	pwm_set_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_WRITE;
> +	pwm_set_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
> +	pwm_set_cmd[4] = pwm_set_val;
> +
> +	mutex_lock(&mcu_hwmon->lock);
> +	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_set_cmd,
> +						sizeof(pwm_set_cmd), resp_buf,
> +						&reply_size);
> +	if (ret)
> +		goto exit;
> +
> +	if (reply_size != 3) {
> +		ret = -EIO;
> +		goto exit;
> +	}
> +
> +	if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
> +	      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
> +	      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
> +		ret = -EIO;
> +		goto exit;
> +	}
> +exit:
> +	mutex_unlock(&mcu_hwmon->lock);
> +	return ret;
> +}
> +
> +static int iei_wt61p803_puzzle_read_pwm_channel(struct iei_wt61p803_puzzle_hwmon *mcu_hwmon,
> +						int channel, long *value)
> +{
> +	unsigned char *resp_buf = mcu_hwmon->response_buffer;
> +	unsigned char pwm_get_cmd[5] = {};
> +	size_t reply_size;
> +	int ret;
> +
> +	pwm_get_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
> +	pwm_get_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FAN;
> +	pwm_get_cmd[2] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ;
> +	pwm_get_cmd[3] = IEI_WT61P803_PUZZLE_CMD_FAN_PWM(channel);
> +
> +	ret = iei_wt61p803_puzzle_write_command(mcu_hwmon->mcu, pwm_get_cmd,
> +						sizeof(pwm_get_cmd), resp_buf,
> +						&reply_size);
> +	if (ret)
> +		return ret;
> +
> +	if (reply_size != 5)
> +		return -EIO;
> +
> +	if (resp_buf[2] != IEI_WT61P803_PUZZLE_CMD_FAN_PWM_READ)
> +		return -EIO;
> +
> +	*value = resp_buf[3];
> +
> +	return 0;
> +}
> +
> +static int iei_wt61p803_puzzle_read(struct device *dev, enum hwmon_sensor_types type,
> +				    u32 attr, int channel, long *val)
> +{
> +	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
> +
> +	switch (type) {
> +	case hwmon_pwm:
> +		return iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, channel, val);
> +	case hwmon_fan:
> +		return iei_wt61p803_puzzle_read_fan_speed(mcu_hwmon, channel, val);
> +	case hwmon_temp:
> +		return iei_wt61p803_puzzle_read_temp_sensor(mcu_hwmon, channel, val);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int iei_wt61p803_puzzle_write(struct device *dev, enum hwmon_sensor_types type,
> +				     u32 attr, int channel, long val)
> +{
> +	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = dev_get_drvdata(dev->parent);
> +
> +	return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, channel, val);
> +}
> +
> +static umode_t iei_wt61p803_puzzle_is_visible(const void *data, enum hwmon_sensor_types type,
> +					      u32 attr, int channel)
> +{
> +	const struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = data;
> +
> +	switch (type) {
> +	case hwmon_pwm:
> +		if (mcu_hwmon->thermal_cooling_dev_present[channel])
> +			return 0444;
> +		if (attr == hwmon_pwm_input)
> +			return 0644;
> +		break;
> +	case hwmon_fan:
> +		if (attr == hwmon_fan_input)
> +			return 0444;
> +		break;
> +	case hwmon_temp:
> +		if (attr == hwmon_temp_input)
> +			return 0444;
> +		break;
> +	default:
> +		return 0;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct hwmon_ops iei_wt61p803_puzzle_hwmon_ops = {
> +	.is_visible = iei_wt61p803_puzzle_is_visible,
> +	.read = iei_wt61p803_puzzle_read,
> +	.write = iei_wt61p803_puzzle_write,
> +};
> +
> +static const struct hwmon_channel_info *iei_wt61p803_puzzle_info[] = {
> +	HWMON_CHANNEL_INFO(pwm,
> +			   HWMON_PWM_INPUT,
> +			   HWMON_PWM_INPUT),
> +	HWMON_CHANNEL_INFO(fan,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT,
> +			   HWMON_F_INPUT),
> +	HWMON_CHANNEL_INFO(temp,
> +			   HWMON_T_INPUT,
> +			   HWMON_T_INPUT),
> +	NULL
> +};
> +
> +static const struct hwmon_chip_info iei_wt61p803_puzzle_chip_info = {
> +	.ops = &iei_wt61p803_puzzle_hwmon_ops,
> +	.info = iei_wt61p803_puzzle_info,
> +};
> +
> +static int iei_wt61p803_puzzle_get_max_state(struct thermal_cooling_device *tcdev,
> +					     unsigned long *state)
> +{
> +	*state = IEI_WT61P803_PUZZLE_HWMON_MAX_PWM_VAL;
> +
> +	return 0;
> +}
> +
> +static int iei_wt61p803_puzzle_get_cur_state(struct thermal_cooling_device *tcdev,
> +					     unsigned long *state)
> +{
> +	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
> +	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
> +	long value;
> +	int ret;
> +
> +	ret = iei_wt61p803_puzzle_read_pwm_channel(mcu_hwmon, cdev->pwm_channel, &value);
> +	if (ret)
> +		return ret;
> +	*state = value;
> +	return 0;
> +}
> +
> +static int iei_wt61p803_puzzle_set_cur_state(struct thermal_cooling_device *tcdev,
> +					     unsigned long state)
> +{
> +	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev = tcdev->devdata;
> +	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon = cdev->mcu_hwmon;
> +
> +	return iei_wt61p803_puzzle_write_pwm_channel(mcu_hwmon, cdev->pwm_channel, state);
> +}
> +
> +static const struct thermal_cooling_device_ops iei_wt61p803_puzzle_cooling_ops = {
> +	.get_max_state = iei_wt61p803_puzzle_get_max_state,
> +	.get_cur_state = iei_wt61p803_puzzle_get_cur_state,
> +	.set_cur_state = iei_wt61p803_puzzle_set_cur_state,
> +};
> +
> +static int
> +iei_wt61p803_puzzle_enable_thermal_cooling_dev(struct device *dev,
> +					       struct fwnode_handle *child,
> +					       struct iei_wt61p803_puzzle_hwmon *mcu_hwmon)
> +{
> +	struct iei_wt61p803_puzzle_thermal_cooling_device *cdev;
> +	u32 pwm_channel;
> +	u8 num_levels;
> +	int ret;
> +
> +	ret = fwnode_property_read_u32(child, "reg", &pwm_channel);
> +	if (ret)
> +		return ret;
> +
> +	mcu_hwmon->thermal_cooling_dev_present[pwm_channel] = true;
> +
> +	num_levels = fwnode_property_count_u8(child, "cooling-levels");
> +	if (!num_levels)
> +		return -EINVAL;
> +
> +	cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL);
> +	if (!cdev)
> +		return -ENOMEM;
> +
> +	cdev->cooling_levels = devm_kmalloc_array(dev, num_levels, sizeof(u8), GFP_KERNEL);
> +	if (!cdev->cooling_levels)
> +		return -ENOMEM;
> +
> +	ret = fwnode_property_read_u8_array(child, "cooling-levels",
> +					    cdev->cooling_levels,
> +					    num_levels);
> +	if (ret) {
> +		dev_err(dev, "Couldn't read property 'cooling-levels'\n");
> +		return ret;
> +	}
> +
> +	snprintf(cdev->name, THERMAL_NAME_LENGTH, "wt61p803_puzzle_%d", pwm_channel);
> +	cdev->tcdev = devm_thermal_of_cooling_device_register(dev, NULL, cdev->name, cdev,
> +							      &iei_wt61p803_puzzle_cooling_ops);
> +	if (IS_ERR(cdev->tcdev))
> +		return PTR_ERR(cdev->tcdev);
> +
> +	cdev->mcu_hwmon = mcu_hwmon;
> +	cdev->pwm_channel = pwm_channel;
> +	mcu_hwmon->cdev[pwm_channel] = cdev;
> +
> +	return 0;
> +}
> +
> +static int iei_wt61p803_puzzle_hwmon_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct iei_wt61p803_puzzle *mcu = dev_get_drvdata(dev->parent);
> +	struct iei_wt61p803_puzzle_hwmon *mcu_hwmon;
> +	struct fwnode_handle *child;
> +	struct device *hwmon_dev;
> +	int ret;
> +
> +	mcu_hwmon = devm_kzalloc(dev, sizeof(*mcu_hwmon), GFP_KERNEL);
> +	if (!mcu_hwmon)
> +		return -ENOMEM;
> +
> +	mcu_hwmon->mcu = mcu;
> +	platform_set_drvdata(pdev, mcu_hwmon);
> +	mutex_init(&mcu_hwmon->lock);
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(dev, "iei_wt61p803_puzzle",
> +							 mcu_hwmon,
> +							 &iei_wt61p803_puzzle_chip_info,
> +							 NULL);
> +	if (IS_ERR(hwmon_dev))
> +		return PTR_ERR(hwmon_dev);
> +
> +	/* Control fans via PWM lines via Linux Kernel */
> +	if (IS_ENABLED(CONFIG_THERMAL)) {
> +		device_for_each_child_node(dev, child) {
> +			ret = iei_wt61p803_puzzle_enable_thermal_cooling_dev(dev, child, mcu_hwmon);
> +			if (ret) {
> +				dev_err(dev, "Enabling the PWM fan failed\n");
> +				fwnode_handle_put(child);
> +				return ret;
> +			}
> +		}
> +	}
> +	return 0;
> +}
> +
> +static const struct of_device_id iei_wt61p803_puzzle_hwmon_id_table[] = {
> +	{ .compatible = "iei,wt61p803-puzzle-hwmon" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, iei_wt61p803_puzzle_hwmon_id_table);
> +
> +static struct platform_driver iei_wt61p803_puzzle_hwmon_driver = {
> +	.driver = {
> +		.name = "iei-wt61p803-puzzle-hwmon",
> +		.of_match_table = iei_wt61p803_puzzle_hwmon_id_table,
> +	},
> +	.probe = iei_wt61p803_puzzle_hwmon_probe,
> +};
> +
> +module_platform_driver(iei_wt61p803_puzzle_hwmon_driver);
> +
> +MODULE_DESCRIPTION("IEI WT61P803 PUZZLE MCU HWMON Driver");
> +MODULE_AUTHOR("Luka Kovacic <luka.kovacic@sartura.hr>");
> +MODULE_LICENSE("GPL v2");
> 


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation
  2021-07-05 13:49 ` [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation Pavo Banicevic
@ 2021-07-05 16:14   ` Guenter Roeck
  0 siblings, 0 replies; 12+ messages in thread
From: Guenter Roeck @ 2021-07-05 16:14 UTC (permalink / raw)
  To: Pavo Banicevic, linux-doc, linux-leds, devicetree, linux-hwmon,
	linux-kernel, geert+renesas, Max.Merchel, linux, daniel,
	shawnguo, sam, arnd, krzysztof.kozlowski, corbet, lee.jones,
	pavel, robh+dt, jdelvare, goran.medic, luka.perkov, luka.kovacic
  Cc: Robert Marko

On 7/5/21 6:49 AM, Pavo Banicevic wrote:
> From: Luka Kovacic <luka.kovacic@sartura.hr>
> 
> Add the iei-wt61p803-puzzle driver hwmon driver interface documentation.
> 
> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
> Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
> Cc: Luka Perkov <luka.perkov@sartura.hr>
> Cc: Robert Marko <robert.marko@sartura.hr>
> ---
>   .../hwmon/iei-wt61p803-puzzle-hwmon.rst       | 42 +++++++++++++++++++

Needs to be added to index.rst.

>   1 file changed, 42 insertions(+)
>   create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
> 
> diff --git a/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
> new file mode 100644
> index 000000000000..04b01e53760c
> --- /dev/null
> +++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst > @@ -0,0 +1,42 @@
> +.. SPDX-License-Identifier: GPL-2.0-only
> +
> +Kernel driver iei-wt61p803-puzzle-hwmon
> +=======================================
> +
> +Supported chips:
> + * IEI WT61P803 PUZZLE for IEI Puzzle M801
> +
> +   Prefix: 'iei-wt61p803-puzzle-hwmon'
> +
> +Author: Luka Kovacic <luka.kovacic@sartura.hr>
> +
> +
> +Description
> +-----------
> +
> +This driver adds fan and temperature sensor reading for some IEI Puzzle
> +series boards.
> +
> +Sysfs attributes
> +----------------
> +
> +The following attributes are supported:
> +
> +- IEI WT61P803 PUZZLE for IEI Puzzle M801
> +
> +/sys files in hwmon subsystem
> +-----------------------------
> +
> +================= == ===================================================
> +fan[1-5]_input    RO files for fan speed (in RPM)
> +pwm[1-2]          RW files for fan[1-2] target duty cycle (0..255)

There are also temperature sensors.

> +================= == ===================================================
> +
> +/sys files in thermal subsystem
> +-------------------------------
> +
> +================= == ====================================================
> +cur_state         RW file for current cooling state of the cooling device
> +                     (0..max_state)
> +max_state         RO file for maximum cooling state of the cooling device
> +================= == ====================================================
> 


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v8 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU
  2021-07-05 13:49 ` [PATCH v8 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU Pavo Banicevic
@ 2021-07-05 20:57   ` kernel test robot
  0 siblings, 0 replies; 12+ messages in thread
From: kernel test robot @ 2021-07-05 20:57 UTC (permalink / raw)
  To: Pavo Banicevic, linux-doc, linux-leds, devicetree, linux-hwmon,
	linux-kernel, geert+renesas, Max.Merchel, linux, daniel,
	shawnguo
  Cc: kbuild-all

[-- Attachment #1: Type: text/plain, Size: 3050 bytes --]

Hi Pavo,

I love your patch! Perhaps something to improve:

[auto build test WARNING on hwmon/hwmon-next]
[also build test WARNING on pavel-linux-leds/for-next lee-mfd/for-mfd-next v5.13 next-20210701]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Pavo-Banicevic/Add-support-for-the-IEI-WT61P803-PUZZLE-MCU/20210705-215150
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
config: arc-allyesconfig (attached as .config)
compiler: arceb-elf-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/fd7335dc2a71b541d72f88ca1f251e201790f718
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Pavo-Banicevic/Add-support-for-the-IEI-WT61P803-PUZZLE-MCU/20210705-215150
        git checkout fd7335dc2a71b541d72f88ca1f251e201790f718
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/mfd/iei-wt61p803-puzzle.c:277:5: warning: no previous prototype for 'iei_wt61p803_puzzle_buzzer' [-Wmissing-prototypes]
     277 | int iei_wt61p803_puzzle_buzzer(struct iei_wt61p803_puzzle *mcu, bool long_beep)
         |     ^~~~~~~~~~~~~~~~~~~~~~~~~~


vim +/iei_wt61p803_puzzle_buzzer +277 drivers/mfd/iei-wt61p803-puzzle.c

   276	
 > 277	int iei_wt61p803_puzzle_buzzer(struct iei_wt61p803_puzzle *mcu, bool long_beep)
   278	{
   279		unsigned char *resp_buf = mcu->response_buffer;
   280		unsigned char buzzer_cmd[4] = {};
   281		size_t reply_size;
   282		int ret;
   283	
   284		buzzer_cmd[0] = IEI_WT61P803_PUZZLE_CMD_HEADER_START;
   285		buzzer_cmd[1] = IEI_WT61P803_PUZZLE_CMD_FUNCTION_SINGLE;
   286		buzzer_cmd[2] = long_beep ? '3' : '2'; /* Buzzer 1.5 / 0.5 second beep */
   287	
   288		mutex_lock(&mcu->lock);
   289		ret = iei_wt61p803_puzzle_write_command(mcu, buzzer_cmd, sizeof(buzzer_cmd),
   290							resp_buf, &reply_size);
   291		if (ret)
   292			goto exit;
   293	
   294		if (reply_size != 3) {
   295			ret = -EIO;
   296			goto exit;
   297		}
   298	
   299		if (!(resp_buf[0] == IEI_WT61P803_PUZZLE_CMD_HEADER_START &&
   300		      resp_buf[1] == IEI_WT61P803_PUZZLE_CMD_RESPONSE_OK &&
   301		      resp_buf[2] == IEI_WT61P803_PUZZLE_CHECKSUM_RESPONSE_OK)) {
   302			ret = -EPROTO;
   303			goto exit;
   304		}
   305	exit:
   306		mutex_unlock(&mcu->lock);
   307		return ret;
   308	}
   309	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 68183 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v8 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings
  2021-07-05 13:49 ` [PATCH v8 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings Pavo Banicevic
@ 2021-07-12 16:04   ` Rob Herring
  0 siblings, 0 replies; 12+ messages in thread
From: Rob Herring @ 2021-07-12 16:04 UTC (permalink / raw)
  To: Pavo Banicevic
  Cc: linux-doc, linux-leds, devicetree, linux-hwmon, linux-kernel,
	geert+renesas, Max.Merchel, linux, daniel, shawnguo, sam, arnd,
	krzysztof.kozlowski, corbet, lee.jones, pavel, linux, jdelvare,
	goran.medic, luka.perkov, luka.kovacic, Robert Marko

On Mon, Jul 05, 2021 at 03:49:33PM +0200, Pavo Banicevic wrote:
> From: Luka Kovacic <luka.kovacic@sartura.hr>
> 
> Add the IEI WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED
> drivers. A new vendor prefix is also added accordingly for
> IEI Integration Corp.
> 
> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
> Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
> Cc: Luka Perkov <luka.perkov@sartura.hr>
> Cc: Robert Marko <robert.marko@sartura.hr>
> ---
>  .../hwmon/iei,wt61p803-puzzle-hwmon.yaml      | 53 ++++++++++++
>  .../leds/iei,wt61p803-puzzle-leds.yaml        | 44 ++++++++++
>  .../bindings/mfd/iei,wt61p803-puzzle.yaml     | 82 +++++++++++++++++++
>  .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
>  4 files changed, 181 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
>  create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
>  create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
> new file mode 100644
> index 000000000000..c24a24e90495
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: IEI WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp.
> +
> +maintainers:
> +  - Luka Kovacic <luka.kovacic@sartura.hr>
> +
> +description: |
> +  This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
> +  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
> +
> +  The HWMON module is a sub-node of the MCU node in the Device Tree.
> +
> +properties:
> +  compatible:
> +    const: iei,wt61p803-puzzle-hwmon
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +patternProperties:
> +  "^fan-group@[0-1]$":
> +    type: object
> +    properties:
> +      reg:
> +        minimum: 0
> +        maximum: 1
> +        description:
> +          Fan group ID
> +
> +      cooling-levels:
> +        minItems: 1
> +        maxItems: 255
> +        description:
> +          Cooling levels for the fans (PWM value mapping)
> +    description: |
> +      Properties for each fan group.
> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
> new file mode 100644
> index 000000000000..dc3e39aafd3e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
> @@ -0,0 +1,44 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: IEI WT61P803 PUZZLE MCU LED module from IEI Integration Corp.
> +
> +maintainers:
> +  - Luka Kovacic <luka.kovacic@sartura.hr>
> +
> +description: |
> +  This module is a part of the IEI WT61P803 PUZZLE MFD device. For more details
> +  see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml.
> +
> +  The LED module is a sub-node of the MCU node in the Device Tree.
> +
> +properties:
> +  compatible:
> +    const: iei,wt61p803-puzzle-leds
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  "led@0":

Don't need quotes.

> +    type: object
> +    $ref: common.yaml
> +    description: |
> +      Properties for a single LED.
> +    properties:
> +      reg:
> +        description:
> +          Index of the LED. Only one LED is supported at the moment.
> +        const: 0

If there can only be 1 LED, just make an 'led' node and drop reg.

> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
> new file mode 100644
> index 000000000000..2452631505cc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
> @@ -0,0 +1,82 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: IEI WT61P803 PUZZLE MCU from IEI Integration Corp.
> +
> +maintainers:
> +  - Luka Kovacic <luka.kovacic@sartura.hr>
> +
> +description: |
> +  IEI WT61P803 PUZZLE MCU is embedded in some IEI Puzzle series boards.
> +  It's used for controlling system power states, fans, LEDs and temperature
> +  sensors.
> +
> +  For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the
> +  binding documents under the respective subsystem directories.
> +
> +properties:
> +  compatible:
> +    const: iei,wt61p803-puzzle
> +
> +  current-speed:
> +    description:
> +      Serial bus speed in bps
> +    maxItems: 1
> +
> +  enable-beep: true
> +
> +  hwmon:
> +    $ref: ../hwmon/iei,wt61p803-puzzle-hwmon.yaml

/schemas/hwmon/...

> +
> +  leds:
> +    $ref: ../leds/iei,wt61p803-puzzle-leds.yaml

/schemas/leds/...

> +
> +required:
> +  - compatible
> +  - current-speed
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/leds/common.h>
> +    serial {
> +        mcu {
> +            compatible = "iei,wt61p803-puzzle";
> +            current-speed = <115200>;
> +            enable-beep;
> +
> +            leds {
> +                compatible = "iei,wt61p803-puzzle-leds";
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                led@0 {
> +                    reg = <0>;
> +                    function = LED_FUNCTION_POWER;
> +                    color = <LED_COLOR_ID_BLUE>;
> +                };
> +            };
> +
> +            hwmon {
> +                compatible = "iei,wt61p803-puzzle-hwmon";
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                fan-group@0 {
> +                    #cooling-cells = <2>;
> +                    reg = <0x00>;
> +                    cooling-levels = <64 102 170 230 250>;
> +                };
> +
> +                fan-group@1 {
> +                    #cooling-cells = <2>;
> +                    reg = <0x01>;
> +                    cooling-levels = <64 102 170 230 250>;
> +                };
> +            };
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index b868cefc7c55..e02b6d6eb568 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -509,6 +509,8 @@ patternProperties:
>      description: IC Plus Corp.
>    "^idt,.*":
>      description: Integrated Device Technologies, Inc.
> +  "^iei,.*":
> +    description: IEI Integration Corp.
>    "^ifi,.*":
>      description: Ingenieurburo Fur Ic-Technologie (I/F/I)
>    "^ilitek,.*":
> -- 
> 2.31.1
> 
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2021-07-12 16:04 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-05 13:49 [PATCH v8 0/7] Add support for the IEI WT61P803 PUZZLE MCU Pavo Banicevic
2021-07-05 13:49 ` [PATCH v8 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings Pavo Banicevic
2021-07-12 16:04   ` Rob Herring
2021-07-05 13:49 ` [PATCH v8 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU Pavo Banicevic
2021-07-05 20:57   ` kernel test robot
2021-07-05 13:49 ` [PATCH v8 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver Pavo Banicevic
2021-07-05 16:13   ` Guenter Roeck
2021-07-05 13:49 ` [PATCH v8 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver Pavo Banicevic
2021-07-05 13:49 ` [PATCH v8 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation Pavo Banicevic
2021-07-05 13:49 ` [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation Pavo Banicevic
2021-07-05 16:14   ` Guenter Roeck
2021-07-05 13:49 ` [PATCH v8 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE driver Pavo Banicevic

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).