From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753819AbdEQHl0 (ORCPT ); Wed, 17 May 2017 03:41:26 -0400 Received: from mail.free-electrons.com ([62.4.15.54]:47736 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752596AbdEQHlM (ORCPT ); Wed, 17 May 2017 03:41:12 -0400 From: Maxime Ripard To: Chen-Yu Tsai , Maxime Ripard , Mike Turquette , Stephen Boyd Cc: Daniel Vetter , David Airlie , dri-devel@lists.freedesktop.org, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Thomas Petazzoni Subject: [PATCH v3 04/21] clk: sunxi-ng: mux: Don't just rely on the parent for CLK_SET_RATE_PARENT Date: Wed, 17 May 2017 09:40:33 +0200 Message-Id: X-Mailer: git-send-email 2.9.3 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The current code only rely on the parent to change its rate in the case where CLK_SET_RATE_PARENT is set. However, some clock rates might be obtained only through a modification of the parent and the clock divider. Just rely on the round rate of the clocks to give us the best computation that might be achieved for a given rate. round_rate functions now need to honor CLK_SET_RATE_PARENT, but either the functions already do that if they modify the parent, or don't modify the praents at all. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- drivers/clk/sunxi-ng/ccu_mux.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/clk/sunxi-ng/ccu_mux.c b/drivers/clk/sunxi-ng/ccu_mux.c index bae735e252b6..58b6e349a0ed 100644 --- a/drivers/clk/sunxi-ng/ccu_mux.c +++ b/drivers/clk/sunxi-ng/ccu_mux.c @@ -95,19 +95,7 @@ int ccu_mux_helper_determine_rate(struct ccu_common *common, if (!parent) continue; - if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) { - struct clk_rate_request parent_req = *req; - int ret = __clk_determine_rate(parent, &parent_req); - - if (ret) - continue; - - parent_rate = parent_req.rate; - } else { - parent_rate = clk_hw_get_rate(parent); - } - - adj_parent_rate = parent_rate; + adj_parent_rate = parent_rate = clk_hw_get_rate(parent); ccu_mux_helper_adjust_parent_for_prediv(common, cm, i, &adj_parent_rate); -- git-series 0.9.1