From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933296AbcLINdW (ORCPT ); Fri, 9 Dec 2016 08:33:22 -0500 Received: from mx0b-001b2d01.pphosted.com ([148.163.158.5]:50403 "EHLO mx0a-001b2d01.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932347AbcLINcZ (ORCPT ); Fri, 9 Dec 2016 08:32:25 -0500 From: "Gautham R. Shenoy" To: Michael Ellerman , Benjamin Herrenschmidt , Paul Mackerras , "Rafael J. Wysocki" , Daniel Lezcano , Michael Neuling , Vaidyanathan Srinivasan , "Shreyas B. Prabhu" , Shilpasri G Bhat , Stewart Smith , Balbir Singh , "Oliver O'Halloran" , "Gautham R. Shenoy" Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring , Mark Rutland Subject: [PATCH v4 0/4] powernv:stop: Use psscr_val,mask provided by firmware Date: Fri, 9 Dec 2016 19:01:59 +0530 X-Mailer: git-send-email 1.8.3.1 X-TM-AS-GCONF: 00 X-Content-Scanned: Fidelis XPS MAILER x-cbid: 16120913-0020-0000-0000-00000A79782C X-IBM-SpamModules-Scores: X-IBM-SpamModules-Versions: BY=3.00006220; HX=3.00000240; KW=3.00000007; PH=3.00000004; SC=3.00000196; SDB=6.00791499; UDB=6.00383428; IPR=6.00569234; BA=6.00004955; NDR=6.00000001; ZLA=6.00000005; ZF=6.00000009; ZB=6.00000000; ZP=6.00000000; ZH=6.00000000; ZU=6.00000002; MB=3.00013582; XFM=3.00000011; UTC=2016-12-09 13:32:23 X-IBM-AV-DETECTION: SAVI=unused REMOTE=unused XFE=unused x-cbparentid: 16120913-0021-0000-0000-000057F625CF Message-Id: X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2016-12-09_08:,, signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 suspectscore=0 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1609300000 definitions=main-1612090188 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: "Gautham R. Shenoy" This is the fourth iteration of the patchset to use the psscr_val and psscr_mask provided by the firmware for each of the stop states. The previous version can be found here: [v3]: https://lkml.org/lkml/2016/11/10/37 [v2]: https://lkml.org/lkml/2016/10/27/143 [v1]: https://lkml.org/lkml/2016/9/29/45 This version fixes some of the coding style issues pointed out by Michael Ellerman in v3. This version also documents the device-tree bindings defining the properties under the @power-mgt node in the device tree describing the idle states for Linux running on baremetal POWER servers. Synopsis ========== In the current implementation, the code for ISA v3.0 stop implementation has a couple of shortcomings. a) The code hand-codes the values for ESL,EC,TR,MTL bits of PSSCR and uses only the RL field from the firmware. While this is not incorrect, since the hand-coded values are legitimate, it is not a very flexible design since the firmware has the capability to communicate these values via the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" properties. In case where the firmware provides values for these fields that is different from the hand-coded values, the current code will not work as intended. b) Due to issue a), the current code assumes that ESL=EC=1 for all the stop states and hence the wakeup from the stop instruction will happen at 0x100, the system-reset vector. However, the ISA v3.0 allows the ESL=EC=0 behaviour where the corresponding stop-state loses no state and wakes up from the subsequent instruction. The current code doesn't handle this case. This patch series addresses these issues. The first patch in the series renames the existing IDLE_STATE_ENTER_SEQ macro to IDLE_STATE_ENTER_SEQ_NORET. It reuses the name IDLE_STATE_ENTER_SEQ for entering into stop-states which wake up at the subsequent instruction. The second patch adds a helper function in cpuidle-powernv.c for initializing entries of the powernv_states[] table that is passed to the cpu-idle core. This eliminates some of the code duplication in the function that discovers and initializes the stop states. The third patch in the series fixes issues a) and b) by ensuring that the psscr-value and the psscr-mask provided by the firmware are what will be used to set a particular stop state. It also adds support for handling wake-up from stop states which were entered with ESL=EC=0. The third patch also handles the older firmware which sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. In the presence of such older firmware, this patch will set the default sane values for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). The fourth patch provides the documentation for the device-tree bindings describing the idle state properties under the @power-mgt node in the device-tree. The skiboot patch populates all the relevant fields in the PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html The patches are based on top of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git fixes Gautham R. Shenoy (4): powernv:idle: Add IDLE_STATE_ENTER_SEQ_NORET macro cpuidle:powernv: Add helper function to populate powernv idle states. powernv: Pass PSSCR value and mask to power9_idle_stop Documentation:powerpc: Add device-tree bindings for power-mgt .../devicetree/bindings/powerpc/opal/power-mgt.txt | 123 +++++++++++++++++++++ arch/powerpc/include/asm/cpuidle.h | 46 +++++++- arch/powerpc/include/asm/processor.h | 3 +- arch/powerpc/kernel/exceptions-64s.S | 6 +- arch/powerpc/kernel/idle_book3s.S | 41 ++++--- arch/powerpc/platforms/powernv/idle.c | 81 +++++++++++--- arch/powerpc/platforms/powernv/powernv.h | 3 +- arch/powerpc/platforms/powernv/smp.c | 14 ++- drivers/cpuidle/cpuidle-powernv.c | 113 ++++++++++++------- include/linux/cpuidle.h | 1 + 10 files changed, 348 insertions(+), 83 deletions(-) create mode 100644 Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt -- 1.9.4