From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752903AbdJ3Uwb (ORCPT ); Mon, 30 Oct 2017 16:52:31 -0400 Received: from mga03.intel.com ([134.134.136.65]:49976 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751920AbdJ3Uw3 (ORCPT ); Mon, 30 Oct 2017 16:52:29 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.44,321,1505804400"; d="scan'208";a="915564166" From: Tom Zanussi To: rostedt@goodmis.org Cc: tglx@linutronix.de, mhiramat@kernel.org, namhyung@kernel.org, vedang.patel@intel.com, bigeasy@linutronix.de, joel.opensrc@gmail.com, joelaf@google.com, mathieu.desnoyers@efficios.com, baohong.liu@intel.com, rajvi.jingar@intel.com, julia@ni.com, linux-kernel@vger.kernel.org, linux-rt-users@vger.kernel.org, Tom Zanussi Subject: [PATCH v4 00/37] tracing: Inter-event (e.g. latency) support Date: Mon, 30 Oct 2017 15:51:42 -0500 Message-Id: X-Mailer: git-send-email 1.9.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, This is V4 of the inter-event tracing patchset, addressing input from V3. These mainly directly address the input from V3, but there are a couple new things too - a new set of selftests (thanks to Rajvi Jingar for those), and a new 'timestamp_mode' ftrace file making it easy to see exactly what mode the ring buffer timestamping is in at any given time (delta or absolute). The detailed list: - fixed up 'if' parsing to also handle variables starting with 'if' - added lots of comments to the field variable code - added code to check and not fail if a field variable was already created - fixed various typos,etc in commit messages - moved target_hist_data fix from onmatch patch to field var patch - fixed var_name leak in parse_var_defs() - changed common_timestamp -> $common_timestamp in commit messages - discovered and fixed a bug where variable references were not guaranteed unique - added missing destroy_hist_field() in expression code - separated synth event list management from synth event de/registration - added missing 2nd-level variable reference checking in expressions - added self-reference check to find_any_var_ref() - removed HIST_FIELD_FL_VAR_ONLY and related code - added WARN_ON_ONCE to hist_trigger_entry_print() - changed absolute timestamps to allow coexistence with normal (delta) timestamps - added a new read-only 'timestamp_mode' file to show current timestamp mode - moved hist trigger Documentation into standalone histogram.txt file - added new inter-event Documentation to histogram.txt - removed redundant description of $common_timestamp usage from Documentation - added missing .log2 line to Documentation - added missing .usecs line to README pseudo-file - added new set of selftests for various inter-event features [Rajvi Jingar] Changes from V2: - split out standalone bugfixes and cleanups to a separate patchset - moved hunks around and merged patches as suggested - added inter-event note in config option - updates to duplicates patch [Vedang Patel] - various memory allocation checks and use-after-free bugfix [Rajvi Jingar] - various code improvements as suggested by Steve - switched hist_field_flags over to using shifts - added comments about synth_event mutex usage - added example and explanation of field variables - fixed field variable synth_event_mutex bug - commented the whitespace handling in hist_trigger_func() (the extra complexity is needed to allow spaces in actions) - use smp_processor_id() instead of raw_ for cpu field - added better description of aliases - use static arrays instead of kmalloc for hist_err code, along with various other cleanups - removed 'tracing: Add support for dynamic tracepoints' since I was mistaken about the need for this Changes from V1: There are too many changes to list in detail, most of them directly addressing input from V1, but here are the major changes from V1 (thanks to everyone who reviewed V1 and thanks to both Vedang Patel and Baohong Liu for their contributions and included patches): - cleaned up the event format - add types to synthetic event fields - change to mutex ordering to avoid splat - suppress output of the contributing trace events into the trace buffer, unless explicitly enabled - changed from sched_wakeup to sched_waking in the examples - extended timestamp updates - use a flag to signify dynamic tracepoints, rather than via api changes - recursion level fixes - removal of the possibility of tracing_map duplicates (Vedang) - removal of duplicate-merging code (Vedang) - max buffer absolute timestamp fix (Baohong) - separate variable definition and assignment (Baohong) - make variables instance-safe - split a couple larger patches into smaller, various refactoring - string handling fixes - use function pointer for synthetic tracepoint func - use union for actions - various clean-ups as mentioned in review - Documentation updates - special-case recursion allowance for synthetic event generation NOTE: The first patch in the series, 'tracing: Exclude 'generic fields' from histograms' should go in regardless of the rest, since it fixes a bug in existing code. Thanks, Tom This patchset adds support for 'inter-event' quantities to the trace event subsystem. The most important example of inter-event quantities are latencies, or the time differences between two events. One of the main motivations for adding this capability is to provide a general-purpose base that existing existing tools such as the -RT latency_hist patchset can be built upon, while at the same time providing a simple way for users to track latencies (or any inter-event quantity) generically between any two events. Previous -RT latency_hist patchsets that take advantage of the trace event subsystem have been submitted, but they essentially hard-code special-case tracepoints and application logic in ways that can't be reused. It seemed to me that rather than providing a one-off patchset devoted specifically to generating the specific histograms in the latency_hist patchset, it should be possible to build the same functionality on top of a generic layer allowing users to do similar things for other non-latency_hist applications. In addition to preliminary patches that add some basic missing functionality such as a common ringbuffer-derived timestamp and dynamically-creatable tracepoints, the overall patchset is divided up into a few different areas that combine to produce the overall goal (The Documentation patch explains all the details): - variables and simple expressions required to calculate a latency In order to calculate a latency or any inter-event value, something from one event needs to be saved and later retrieved, and some operation such as subtraction or addition is performed on it. This means some minimal form of variables and expressions, which the first set of patches implements. Saving and retrieving events to use in a latency calculation is normally done using a hash table, and that's exactly what we have with trace event hist triggers, so that's where variables are instantiated, set, and retrieved. Basically, variables are set on one entry and retrieved and used by a 'matching' event. - 'synthetic' events, combining variables from other events The trace event interface is based on pseudo-files associated with individual events, so it wouldn't really make sense to have quantities derived from multiple events attached to any one of those events. For that reason, the patchset implements a means of combining variables from other events into a separate 'synthetic' event, which can be treated as if it were just like any other trace event in the system. - 'actions' generating synthetic events, among other things Variables and synthetic events provide the data and data structure for new events, but something still needs to actually generate an event using that data. 'Actions' are expanded to provide that capability. Though it hasn't been explicitly called as much before, the default 'action' currently for a hist trigger is to update the matching histogram entry's sum values. This patchset essentially expands that to provide a new 'onmatch.trace(event)' action that can be used to have one event generate another. The mechanism is extensible to other actions, and in fact the patchset also includes another, 'onmax(var).save(field,...)' that can be used to save context whenever a value exceeds the previous maximum (something also needed by latency_hist). I'm submitting the patchset (based on tracing/for-next) as an RFC not only to get comments, but because there are still some problems I haven't fixed yet... Here are some examples that should make things less abstract. ==== Example - wakeup latency ==== This basically implements the -RT latency_hist 'wakeup_latency' histogram using the synthetic events, variables, and actions described. The output below is from a run of cyclictest using the following command: # rt-tests/cyclictest -p 80 -n -s -t 2 What we're measuring the latency of is the time between when a thread (of cyclictest) is awakened and when it's scheduled in. To do that we add triggers to sched_waking and sched_switch with the appropriate variables, and on a matching sched_switch event, generate a synthetic 'wakeup_latency' event. Since it's just another trace event like any other, we can also define a histogram on that event, the output of which is what we see displayed when reading the wakeup_latency 'hist' file. First, we create a synthetic event called wakeup_latency, that creates 3 fields which will reference variables from other events: # echo 'wakeup_latency u64 lat; pid_t pid; int prio' >> \ /sys/kernel/debug/tracing/synthetic_events Next we add a trigger to sched_waking, which saves the value of the '$common_timestamp' when that event is hit in a variable, ts0. Note that this happens only when 'comm==cyclictest'. Also, '$common_timestamp' is a new field defined on every event (if needed - if there are no users of timestamps in a trace, timestamps won't be saved and there's no additional overhead from that). # echo 'hist:keys=pid:ts0=$common_timestamp.usecs if comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_waking/trigger Next, we add a trigger to sched_switch. When the pid being switched to matches the pid woken up by a previous sched_waking event, this event grabs the ts0 variable saved on that event, takes the difference between it and the current sched_switch's $common_timestamp, and assigns it to a new 'wakeup_lat' variable. It then generates the wakeup_latency synthetic event defined earlier by 'invoking' it as a function using as parameters the wakeup_lat variable and two sched_switch event fields directly: # echo 'hist:keys=next_pid:wakeup_lat=$common_timestamp.usecs-$ts0: \ onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,next_prio) \ if next_comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_switch/trigger Finally, all we have left to do is create a standard histogram simply naming the fields of the wakeup_latency synthetic event: # echo 'hist:keys=pid,prio,lat:sort=pid,lat' >> \ /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger At any time, we can see the histogram output by simply reading the synthetic/wakeup_latency/hist file: # cat /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/hist # event histogram # # trigger info: hist:keys=pid,prio,lat:vals=hitcount:sort=pid,lat:size=2048 [active] # { pid: 2418, prio: 120, lat: 6 } hitcount: 21 { pid: 2418, prio: 120, lat: 7 } hitcount: 62 { pid: 2418, prio: 120, lat: 8 } hitcount: 44 { pid: 2418, prio: 120, lat: 9 } hitcount: 34 { pid: 2418, prio: 120, lat: 10 } hitcount: 16 { pid: 2418, prio: 120, lat: 11 } hitcount: 5 { pid: 2418, prio: 120, lat: 12 } hitcount: 2 { pid: 2418, prio: 120, lat: 13 } hitcount: 2 { pid: 2418, prio: 120, lat: 14 } hitcount: 1 { pid: 2418, prio: 120, lat: 15 } hitcount: 1 { pid: 2418, prio: 120, lat: 16 } hitcount: 1 { pid: 2418, prio: 120, lat: 18 } hitcount: 2 { pid: 2418, prio: 120, lat: 19 } hitcount: 1 { pid: 2418, prio: 120, lat: 20 } hitcount: 1 { pid: 2418, prio: 120, lat: 21 } hitcount: 1 { pid: 2418, prio: 120, lat: 22 } hitcount: 1 { pid: 2418, prio: 120, lat: 23 } hitcount: 1 { pid: 2418, prio: 120, lat: 56 } hitcount: 1 { pid: 2418, prio: 120, lat: 60 } hitcount: 1 { pid: 2418, prio: 120, lat: 123 } hitcount: 1 { pid: 2419, prio: 19, lat: 4 } hitcount: 12 { pid: 2419, prio: 19, lat: 5 } hitcount: 230 { pid: 2419, prio: 19, lat: 6 } hitcount: 343 { pid: 2419, prio: 19, lat: 7 } hitcount: 485 { pid: 2419, prio: 19, lat: 8 } hitcount: 574 { pid: 2419, prio: 19, lat: 9 } hitcount: 164 { pid: 2419, prio: 19, lat: 10 } hitcount: 51 { pid: 2419, prio: 19, lat: 11 } hitcount: 36 { pid: 2419, prio: 19, lat: 12 } hitcount: 23 { pid: 2419, prio: 19, lat: 13 } hitcount: 16 { pid: 2419, prio: 19, lat: 14 } hitcount: 13 { pid: 2419, prio: 19, lat: 15 } hitcount: 5 { pid: 2419, prio: 19, lat: 16 } hitcount: 6 { pid: 2419, prio: 19, lat: 17 } hitcount: 5 { pid: 2419, prio: 19, lat: 18 } hitcount: 1 { pid: 2419, prio: 19, lat: 19 } hitcount: 2 { pid: 2419, prio: 19, lat: 26 } hitcount: 1 { pid: 2419, prio: 19, lat: 29 } hitcount: 1 { pid: 2419, prio: 19, lat: 37 } hitcount: 1 { pid: 2419, prio: 19, lat: 38 } hitcount: 1 { pid: 2420, prio: 19, lat: 4 } hitcount: 1 { pid: 2420, prio: 19, lat: 5 } hitcount: 45 { pid: 2420, prio: 19, lat: 6 } hitcount: 96 { pid: 2420, prio: 19, lat: 7 } hitcount: 227 { pid: 2420, prio: 19, lat: 8 } hitcount: 558 { pid: 2420, prio: 19, lat: 9 } hitcount: 236 { pid: 2420, prio: 19, lat: 10 } hitcount: 67 { pid: 2420, prio: 19, lat: 11 } hitcount: 27 { pid: 2420, prio: 19, lat: 12 } hitcount: 17 { pid: 2420, prio: 19, lat: 13 } hitcount: 12 { pid: 2420, prio: 19, lat: 14 } hitcount: 11 { pid: 2420, prio: 19, lat: 15 } hitcount: 8 { pid: 2420, prio: 19, lat: 16 } hitcount: 6 { pid: 2420, prio: 19, lat: 17 } hitcount: 3 { pid: 2420, prio: 19, lat: 18 } hitcount: 1 { pid: 2420, prio: 19, lat: 23 } hitcount: 1 { pid: 2420, prio: 19, lat: 25 } hitcount: 1 { pid: 2420, prio: 19, lat: 26 } hitcount: 1 { pid: 2420, prio: 19, lat: 434 } hitcount: 1 Totals: Hits: 3488 Entries: 59 Dropped: 0 The above output uses the .usecs modifier to common_timestamp, so the latencies are reported in microseconds. The default, without the modifier, is nanoseconds, but that's too fine-grained to put directly into a histogram - for that however we can use the .log2 modifier on the 'lat' key. Otherwise the rest is the same: # echo 'wakeup_latency u64 lat; pid_t pid; int prio' >> \ /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=$common_timestamp if comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_waking/trigger # echo 'hist:keys=next_pid:wakeup_lat=$common_timestamp-$ts0: \ onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,next_prio) \ if next_comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=pid,prio,lat.log2:sort=pid,lat' >> \ /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger # cat /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/hist # event histogram # # trigger info: hist:keys=pid,prio,lat.log2:vals=hitcount:sort=pid,lat.log2:size=2048 [active] # { pid: 2457, prio: 120, lat: ~ 2^13 } hitcount: 99 { pid: 2457, prio: 120, lat: ~ 2^14 } hitcount: 91 { pid: 2457, prio: 120, lat: ~ 2^15 } hitcount: 8 { pid: 2458, prio: 19, lat: ~ 2^13 } hitcount: 1437 { pid: 2458, prio: 19, lat: ~ 2^14 } hitcount: 519 { pid: 2458, prio: 19, lat: ~ 2^15 } hitcount: 11 { pid: 2458, prio: 19, lat: ~ 2^16 } hitcount: 2 { pid: 2458, prio: 19, lat: ~ 2^18 } hitcount: 1 { pid: 2459, prio: 19, lat: ~ 2^13 } hitcount: 874 { pid: 2459, prio: 19, lat: ~ 2^14 } hitcount: 442 { pid: 2459, prio: 19, lat: ~ 2^15 } hitcount: 4 Totals: Hits: 3488 Entries: 11 Dropped: 0 ==== Example - wakeup latency with onmax() ==== This example is the same as the previous ones, but here we're additionally using the onmax() action to save some context (several fields of the sched_switch event) whenever the latency (wakeup_lat) exceeds the previous maximum. As with the similar functionality of the -RT latency_hist histograms, it's useful to be able to capture information about the previous process, which potentially could have contributed to the maximum latency that was saved. # echo 'wakeup_latency u64 lat; pid_t pid; int prio' >> \ /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=$common_timestamp.usecs if comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_waking/trigger Here we add an onmax() action that saves some important fields of the sched_switch event along with the maximum, in addition to sending some of the same data to the synthetic event: # echo 'hist:keys=next_pid:wakeup_lat=$common_timestamp.usecs-$ts0: \ onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm): \ onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,next_prio) \ if next_comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=pid,prio,lat:sort=pid,lat' >> \ /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger To see the maximums and associated data for each pid, cat the sched_switch event, as that's the event the onmax() action is associated with: # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist # event histogram # # trigger info: hist:keys=next_pid:vals=hitcount:wakeup_lat=$common_timestamp.usecs-$ts0:sort=hitcount:size=2048:clock=global:onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm):onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,next_prio) if next_comm=="cyclictest" [active] # { next_pid: 2803 } hitcount: 198 max: 55 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/2 { next_pid: 2805 } hitcount: 1319 max: 53 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/1 { next_pid: 2804 } hitcount: 1970 max: 79 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/0 Totals: Hits: 3487 Entries: 3 Dropped: 0 And, verifying, we can see that the max latencies captured above match the highest latencies for each thread in the wakeup_latency histogram: # cat /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/hist # event histogram # # trigger info: hist:keys=pid,prio,lat:vals=hitcount:sort=pid,lat:size=2048 [active] # { pid: 2803, prio: 120, lat: 6 } hitcount: 12 { pid: 2803, prio: 120, lat: 7 } hitcount: 42 ... { pid: 2803, prio: 120, lat: 22 } hitcount: 2 { pid: 2803, prio: 120, lat: 55 } hitcount: 1 { pid: 2804, prio: 19, lat: 4 } hitcount: 5 { pid: 2804, prio: 19, lat: 5 } hitcount: 188 ... { pid: 2804, prio: 19, lat: 30 } hitcount: 1 { pid: 2804, prio: 19, lat: 79 } hitcount: 1 { pid: 2805, prio: 19, lat: 5 } hitcount: 19 { pid: 2805, prio: 19, lat: 6 } hitcount: 73 ... { pid: 2805, prio: 19, lat: 44 } hitcount: 1 { pid: 2805, prio: 19, lat: 53 } hitcount: 1 Totals: Hits: 3487 Entries: 57 Dropped: 0 ==== Example - combined wakeup and switchtime (wakeupswitch) latency ==== Finally, this example is quite a bit more involved, but that's because it implements 3 latencies, one which is a combination of the other two. This also, is something that the -RT latency_hist patchset does and which this patchset adds generic support for. The latency_hist patchset creates a few individual latency histograms but also combines them into larger overall combined histograms. For example, the time between when a thread is awakened and when it actually continues executing in userspace is something covered by a histogram, but it's also broken down into two sub-histograms, one covering the time between sched_waking and the time the thread is scheduled in (wakeup_latency as above), and the time between when the thread is scheduled in and the time it actually begins executing again (return from sys_nanosleep), covered by a separate switchtime_latency histogram. The below combines the wakeup_latency histogram from before, adds a new switchtime_latency histogram, and another, wakeupswitch_latency, that's a combination of the other two. There isn't anything really new here, other than that the use of the addition operator to add two latencies to produce the wakeupswitch_latency. First, we create the familiar wakeup_latency histogram: # echo 'wakeup_latency u64 lat; pid_t pid' >> \ /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=$common_timestamp.usecs \ if comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_waking/trigger # echo 'hist:keys=next_pid:wakeup_lat=$common_timestamp.usecs-$ts0:\ onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid) \ if next_comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_switch/trigger Here we save the wakeup_latency lat value as wakeup_lat for use later in the combined latency: # echo 'hist:keys=pid,lat:wakeup_lat=lat:sort=pid,lat' \ >> /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger Next, we create the switchtime_latency histogram: # echo 'switchtime_latency u64 lat; pid_t pid' >> \ /sys/kernel/debug/tracing/synthetic_events Here we save the sched_switch next_pid field as 'pid'. This is so we can access the next_pid in the matching sys_exit_nanosleep event. # echo 'hist:keys=next_pid:pid=next_pid:ts0=$common_timestamp.usecs \ if next_comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=common_pid:switchtime_lat=$common_timestamp.usecs-$ts0: \ onmatch(sched.sched_switch).switchtime_latency($switchtime_lat,$pid)' \ >> /sys/kernel/debug/tracing/events/syscalls/sys_exit_nanosleep/trigger # echo 'hist:keys=pid,lat:sort=pid,lat' \ >> /sys/kernel/debug/tracing/events/synthetic/switchtime_latency/trigger Finally, we create the combined wakeupswitch_latency: # echo 'wakeupswitch_latency u64 lat; pid_t pid' >> \ /sys/kernel/debug/tracing/synthetic_events Here we calculate the combined latency using the saved $wakeup_lat variable from the wakeup_latency histogram and the lat value of the switchtime_latency, save it as ws_lat and then use it to generate the combined wakeupswitch latency: # echo 'hist:keys=pid,lat:sort=pid,lat:ws_lat=$wakeup_lat+lat: \ onmatch(synthetic.wakeup_latency).wakeupswitch_latency($ws_lat,pid)' \ >> /sys/kernel/debug/tracing/events/synthetic/switchtime_latency/trigger # echo 'hist:keys=pid,lat:sort=pid,lat' >> \ /sys/kernel/debug/tracing/events/synthetic/wakeupswitch_latency/trigger After running our cyclictest workload, we can now look at each histogram, starting with wakeup_latency: # cat /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/hist # event histogram # # trigger info: hist:keys=pid,lat:vals=hitcount:wakeup_lat=lat:sort=pid,lat:size=2048 [active] # { pid: 4146, lat: 6 } hitcount: 8 { pid: 4146, lat: 7 } hitcount: 50 { pid: 4146, lat: 8 } hitcount: 53 { pid: 4146, lat: 9 } hitcount: 34 { pid: 4146, lat: 10 } hitcount: 22 { pid: 4146, lat: 11 } hitcount: 6 { pid: 4146, lat: 12 } hitcount: 4 { pid: 4146, lat: 13 } hitcount: 1 { pid: 4146, lat: 14 } hitcount: 4 { pid: 4146, lat: 15 } hitcount: 2 { pid: 4146, lat: 16 } hitcount: 2 { pid: 4146, lat: 17 } hitcount: 3 { pid: 4146, lat: 19 } hitcount: 1 { pid: 4146, lat: 20 } hitcount: 2 { pid: 4146, lat: 21 } hitcount: 4 { pid: 4146, lat: 24 } hitcount: 1 { pid: 4146, lat: 53 } hitcount: 1 { pid: 4147, lat: 4 } hitcount: 1 { pid: 4147, lat: 5 } hitcount: 156 { pid: 4147, lat: 6 } hitcount: 344 { pid: 4147, lat: 7 } hitcount: 560 { pid: 4147, lat: 8 } hitcount: 540 { pid: 4147, lat: 9 } hitcount: 195 { pid: 4147, lat: 10 } hitcount: 50 { pid: 4147, lat: 11 } hitcount: 38 { pid: 4147, lat: 12 } hitcount: 26 { pid: 4147, lat: 13 } hitcount: 13 { pid: 4147, lat: 14 } hitcount: 12 { pid: 4147, lat: 15 } hitcount: 10 { pid: 4147, lat: 16 } hitcount: 3 { pid: 4147, lat: 17 } hitcount: 2 { pid: 4147, lat: 18 } hitcount: 4 { pid: 4147, lat: 19 } hitcount: 2 { pid: 4147, lat: 20 } hitcount: 1 { pid: 4147, lat: 21 } hitcount: 1 { pid: 4147, lat: 26 } hitcount: 1 { pid: 4147, lat: 35 } hitcount: 1 { pid: 4147, lat: 59 } hitcount: 1 { pid: 4148, lat: 5 } hitcount: 38 { pid: 4148, lat: 6 } hitcount: 229 { pid: 4148, lat: 7 } hitcount: 219 { pid: 4148, lat: 8 } hitcount: 486 { pid: 4148, lat: 9 } hitcount: 181 { pid: 4148, lat: 10 } hitcount: 59 { pid: 4148, lat: 11 } hitcount: 27 { pid: 4148, lat: 12 } hitcount: 23 { pid: 4148, lat: 13 } hitcount: 16 { pid: 4148, lat: 14 } hitcount: 7 { pid: 4148, lat: 15 } hitcount: 7 { pid: 4148, lat: 16 } hitcount: 6 { pid: 4148, lat: 17 } hitcount: 2 { pid: 4148, lat: 18 } hitcount: 2 { pid: 4148, lat: 19 } hitcount: 4 { pid: 4148, lat: 20 } hitcount: 3 { pid: 4148, lat: 25 } hitcount: 1 { pid: 4148, lat: 26 } hitcount: 1 { pid: 4148, lat: 27 } hitcount: 1 { pid: 4148, lat: 29 } hitcount: 2 { pid: 4148, lat: 47 } hitcount: 1 Totals: Hits: 3474 Entries: 59 Dropped: 0 Here's the switchtime histogram: # cat /sys/kernel/debug/tracing/events/synthetic/switchtime_latency/hist # event histogram # # trigger info: hist:keys=pid,lat:vals=hitcount:sort=pid,lat:size=2048 [active] # { pid: 4146, lat: 3 } hitcount: 11 { pid: 4146, lat: 4 } hitcount: 32 { pid: 4146, lat: 5 } hitcount: 65 { pid: 4146, lat: 6 } hitcount: 37 { pid: 4146, lat: 7 } hitcount: 35 { pid: 4146, lat: 8 } hitcount: 5 { pid: 4146, lat: 10 } hitcount: 1 { pid: 4146, lat: 11 } hitcount: 1 { pid: 4146, lat: 12 } hitcount: 1 { pid: 4146, lat: 13 } hitcount: 1 { pid: 4146, lat: 14 } hitcount: 1 { pid: 4146, lat: 15 } hitcount: 1 { pid: 4146, lat: 16 } hitcount: 2 { pid: 4146, lat: 17 } hitcount: 1 { pid: 4146, lat: 18 } hitcount: 1 { pid: 4146, lat: 20 } hitcount: 1 { pid: 4146, lat: 22 } hitcount: 1 { pid: 4146, lat: 55 } hitcount: 1 { pid: 4147, lat: 3 } hitcount: 554 { pid: 4147, lat: 4 } hitcount: 999 { pid: 4147, lat: 5 } hitcount: 193 { pid: 4147, lat: 6 } hitcount: 102 { pid: 4147, lat: 7 } hitcount: 38 { pid: 4147, lat: 8 } hitcount: 21 { pid: 4147, lat: 9 } hitcount: 8 { pid: 4147, lat: 10 } hitcount: 10 { pid: 4147, lat: 11 } hitcount: 11 { pid: 4147, lat: 12 } hitcount: 7 { pid: 4147, lat: 13 } hitcount: 2 { pid: 4147, lat: 14 } hitcount: 2 { pid: 4147, lat: 15 } hitcount: 5 { pid: 4147, lat: 16 } hitcount: 2 { pid: 4147, lat: 17 } hitcount: 3 { pid: 4147, lat: 18 } hitcount: 2 { pid: 4147, lat: 23 } hitcount: 2 { pid: 4148, lat: 3 } hitcount: 245 { pid: 4148, lat: 4 } hitcount: 761 { pid: 4148, lat: 5 } hitcount: 152 { pid: 4148, lat: 6 } hitcount: 64 { pid: 4148, lat: 7 } hitcount: 25 { pid: 4148, lat: 8 } hitcount: 7 { pid: 4148, lat: 9 } hitcount: 14 { pid: 4148, lat: 10 } hitcount: 11 { pid: 4148, lat: 11 } hitcount: 12 { pid: 4148, lat: 12 } hitcount: 6 { pid: 4148, lat: 13 } hitcount: 2 { pid: 4148, lat: 14 } hitcount: 7 { pid: 4148, lat: 15 } hitcount: 2 { pid: 4148, lat: 17 } hitcount: 2 { pid: 4148, lat: 18 } hitcount: 1 { pid: 4148, lat: 19 } hitcount: 1 { pid: 4148, lat: 24 } hitcount: 1 { pid: 4148, lat: 25 } hitcount: 1 { pid: 4148, lat: 42 } hitcount: 1 Totals: Hits: 3474 Entries: 54 Dropped: 0 And here's the combined wakeupswitch latency histogram: # cat /sys/kernel/debug/tracing/events/synthetic/wakeupswitch_latency/hist # event histogram # # trigger info: hist:keys=pid,lat:vals=hitcount:sort=pid,lat:size=2048 [active] # { pid: 4146, lat: 10 } hitcount: 16 { pid: 4146, lat: 11 } hitcount: 18 { pid: 4146, lat: 12 } hitcount: 25 { pid: 4146, lat: 13 } hitcount: 38 { pid: 4146, lat: 14 } hitcount: 25 { pid: 4146, lat: 15 } hitcount: 14 { pid: 4146, lat: 16 } hitcount: 17 { pid: 4146, lat: 17 } hitcount: 14 { pid: 4146, lat: 18 } hitcount: 7 { pid: 4146, lat: 19 } hitcount: 1 { pid: 4146, lat: 20 } hitcount: 3 { pid: 4146, lat: 21 } hitcount: 2 { pid: 4146, lat: 22 } hitcount: 1 { pid: 4146, lat: 23 } hitcount: 1 { pid: 4146, lat: 24 } hitcount: 1 { pid: 4146, lat: 25 } hitcount: 2 { pid: 4146, lat: 26 } hitcount: 2 { pid: 4146, lat: 29 } hitcount: 1 { pid: 4146, lat: 30 } hitcount: 1 { pid: 4146, lat: 32 } hitcount: 1 { pid: 4146, lat: 33 } hitcount: 2 { pid: 4146, lat: 36 } hitcount: 1 { pid: 4146, lat: 37 } hitcount: 1 { pid: 4146, lat: 38 } hitcount: 1 { pid: 4146, lat: 39 } hitcount: 1 { pid: 4146, lat: 73 } hitcount: 1 { pid: 4146, lat: 76 } hitcount: 1 { pid: 4147, lat: 8 } hitcount: 54 { pid: 4147, lat: 9 } hitcount: 205 { pid: 4147, lat: 10 } hitcount: 391 { pid: 4147, lat: 11 } hitcount: 544 { pid: 4147, lat: 12 } hitcount: 342 { pid: 4147, lat: 13 } hitcount: 141 { pid: 4147, lat: 14 } hitcount: 68 { pid: 4147, lat: 15 } hitcount: 46 { pid: 4147, lat: 16 } hitcount: 42 { pid: 4147, lat: 17 } hitcount: 23 { pid: 4147, lat: 18 } hitcount: 23 { pid: 4147, lat: 19 } hitcount: 17 { pid: 4147, lat: 20 } hitcount: 8 { pid: 4147, lat: 21 } hitcount: 7 { pid: 4147, lat: 22 } hitcount: 7 { pid: 4147, lat: 23 } hitcount: 8 { pid: 4147, lat: 24 } hitcount: 4 { pid: 4147, lat: 25 } hitcount: 6 { pid: 4147, lat: 26 } hitcount: 4 { pid: 4147, lat: 27 } hitcount: 1 { pid: 4147, lat: 28 } hitcount: 4 { pid: 4147, lat: 29 } hitcount: 2 { pid: 4147, lat: 30 } hitcount: 3 { pid: 4147, lat: 31 } hitcount: 3 { pid: 4147, lat: 32 } hitcount: 1 { pid: 4147, lat: 34 } hitcount: 1 { pid: 4147, lat: 35 } hitcount: 3 { pid: 4147, lat: 36 } hitcount: 1 { pid: 4147, lat: 50 } hitcount: 1 { pid: 4147, lat: 71 } hitcount: 1 { pid: 4148, lat: 8 } hitcount: 2 { pid: 4148, lat: 9 } hitcount: 100 { pid: 4148, lat: 10 } hitcount: 156 { pid: 4148, lat: 11 } hitcount: 340 { pid: 4148, lat: 12 } hitcount: 341 { pid: 4148, lat: 13 } hitcount: 139 { pid: 4148, lat: 14 } hitcount: 55 { pid: 4148, lat: 15 } hitcount: 42 { pid: 4148, lat: 16 } hitcount: 24 { pid: 4148, lat: 17 } hitcount: 17 { pid: 4148, lat: 18 } hitcount: 18 { pid: 4148, lat: 19 } hitcount: 17 { pid: 4148, lat: 20 } hitcount: 7 { pid: 4148, lat: 21 } hitcount: 4 { pid: 4148, lat: 22 } hitcount: 7 { pid: 4148, lat: 23 } hitcount: 6 { pid: 4148, lat: 24 } hitcount: 3 { pid: 4148, lat: 25 } hitcount: 7 { pid: 4148, lat: 26 } hitcount: 5 { pid: 4148, lat: 27 } hitcount: 3 { pid: 4148, lat: 28 } hitcount: 3 { pid: 4148, lat: 29 } hitcount: 1 { pid: 4148, lat: 30 } hitcount: 4 { pid: 4148, lat: 31 } hitcount: 1 { pid: 4148, lat: 32 } hitcount: 2 { pid: 4148, lat: 33 } hitcount: 3 { pid: 4148, lat: 34 } hitcount: 1 { pid: 4148, lat: 36 } hitcount: 1 { pid: 4148, lat: 37 } hitcount: 2 { pid: 4148, lat: 38 } hitcount: 1 { pid: 4148, lat: 41 } hitcount: 1 { pid: 4148, lat: 53 } hitcount: 1 { pid: 4148, lat: 71 } hitcount: 1 Totals: Hits: 3474 Entries: 90 Dropped: 0 Finally, just to show that synthetic events are indeed just like any other event as far as the event subsystem is concerned, we can enable the synthetic events and see the events appear in the trace buffer: # echo 1 > /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/enable # echo 1 > /sys/kernel/debug/tracing/events/synthetic/switchtime_latency/enable # echo 1 > /sys/kernel/debug/tracing/events/synthetic/wakeupswitch_latency/enable Below is a snippet of the contents of the trace file produced when the above histograms were generated: # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 10503/10503 #P:4 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | -0 [001] d..2 23532.240146: wakeup_latency: lat=4, pid=6853 cyclictest-6853 [001] .... 23532.240153: switchtime_latency: lat=7, pid=6853 cyclictest-6853 [001] .... 23532.240157: wakeupswitch_latency: lat=11, pid=6853 gnome-terminal--2500 [001] d..2 23532.240672: wakeup_latency: lat=5, pid=6854 cyclictest-6854 [001] .... 23532.240676: switchtime_latency: lat=4, pid=6854 cyclictest-6854 [001] .... 23532.240677: wakeupswitch_latency: lat=9, pid=6854 gnome-terminal--2500 [001] d..2 23532.241169: wakeup_latency: lat=4, pid=6853 cyclictest-6853 [001] .... 23532.241172: switchtime_latency: lat=3, pid=6853 cyclictest-6853 [001] .... 23532.241174: wakeupswitch_latency: lat=7, pid=6853 -0 [001] d..2 23532.242189: wakeup_latency: lat=6, pid=6853 cyclictest-6853 [001] .... 23532.242195: switchtime_latency: lat=8, pid=6853 -0 [000] d..2 23532.242196: wakeup_latency: lat=12, pid=6854 cyclictest-6853 [001] .... 23532.240146: wakeupswitch_latency: lat=14, pid=6853 cyclictest-6854 [000] .... 23532.242196: switchtime_latency: lat=4, pid=6854 -0 [001] d..2 23532.240146: wakeup_latency: lat=2, pid=6853 cyclictest-6854 [000] .... 23532.242196: wakeupswitch_latency: lat=16, pid=6854 cyclictest-6853 [001] .... 23532.240146: switchtime_latency: lat=3, pid=6853 ... One quick note about usage - the introduction of variables and actions obviously makes it harder to determine the cause of a hist trigger command failure - 'Invalid argument' is no longer sufficient in many cases. For that reason, a new 'extended error' mechanism has been added to hist triggers, initially focused on variable and action-related errors, but something that could possibly expanded to other error conditions later. To make use of it, simply read the 'hist' file of the event that was the target of the command. In this example, we've entered the same command twice, resulting in an attempt to define the same variable (ts0) twice. After seeing the 'Invalid argument' error for the command, we read the same event's hist file and see a message to that effect at the bottom of the file: # echo 'hist:keys=pid:ts0=$common_timestamp.usecs if comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_waking/trigger # echo 'hist:keys=pid:ts0=$common_timestamp.usecs if comm=="cyclictest"' >> \ /sys/kernel/debug/tracing/events/sched/sched_waking/trigger -su: echo: write error: Invalid argument # cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist # event histogram # # Totals: Hits: 0 Entries: 0 Dropped: 0 ERROR: Variable already defined: ts0 Last command: keys=pid:ts0=$common_timestamp.usecs if comm=="cyclictest" The following changes since commit a96a5037ed0f52e2d86739f4a1ef985bd036e575: tracing, thermal: Hide cpu cooling trace events when not in use (2017-10-17 19:03:09 -0400) are available in the git repository at: https://github.com/tzanussi/linux-trace-inter-event.git tzanussi/inter-event-v4 https://github.com/tzanussi/linux-trace-inter-event/tree/tzanussi/inter-event-v4 Rajvi Jingar (1): selftests: ftrace: Add inter-event hist triggers testcases Tom Zanussi (34): tracing: Move hist trigger Documentation to histogram.txt tracing: Add Documentation for log2 modifier ring-buffer: Add interface for setting absolute time stamps ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP tracing: Add timestamp_mode trace file tracing: Give event triggers access to ring_buffer_event tracing: Add ring buffer event param to hist field functions tracing: Break out hist trigger assignment parsing tracing: Add hist trigger timestamp support tracing: Add per-element variable support to tracing_map tracing: Add hist_data member to hist_field tracing: Add usecs modifier for hist trigger timestamps tracing: Add variable support to hist triggers tracing: Account for variables in named trigger compatibility tracing: Move get_hist_field_flags() tracing: Add simple expression support to hist triggers tracing: Generalize per-element hist trigger data tracing: Pass tracing_map_elt to hist_field accessor functions tracing: Add hist_field 'type' field tracing: Add variable reference handling to hist triggers tracing: Add hist trigger action hook tracing: Add support for 'synthetic' events tracing: Add support for 'field variables' tracing: Add 'onmatch' hist trigger action support tracing: Add 'onmax' hist trigger action support tracing: Allow whitespace to surround hist trigger filter tracing: Add cpu field for hist triggers tracing: Add hist trigger support for variable reference aliases tracing: Add 'last error' error facility for hist triggers tracing: Add inter-event hist trigger Documentation tracing: Make tracing_set_clock() non-static tracing: Add a clock attribute for hist triggers tracing: Increase trace_recursive_lock() limit for synthetic events tracing: Add inter-event blurb to HIST_TRIGGERS config option Vedang Patel (2): tracing: Add support to detect and avoid duplicates tracing: Remove code which merges duplicates Documentation/trace/events.txt | 1548 +------ Documentation/trace/ftrace.txt | 24 + Documentation/trace/histogram.txt | 1998 +++++++++ include/linux/ring_buffer.h | 14 +- include/linux/trace_events.h | 14 +- kernel/trace/Kconfig | 3 + kernel/trace/ring_buffer.c | 127 +- kernel/trace/trace.c | 97 +- kernel/trace/trace.h | 18 +- kernel/trace/trace_events_hist.c | 4737 ++++++++++++++++++-- kernel/trace/trace_events_trigger.c | 53 +- kernel/trace/tracing_map.c | 232 +- kernel/trace/tracing_map.h | 18 +- tools/testing/selftests/ftrace/test.d/functions | 7 + .../inter-event/trigger-extended-error-support.tc | 39 + .../inter-event/trigger-field-variable-support.tc | 54 + .../trigger-inter-event-combined-hist.tc | 61 + .../inter-event/trigger-onmatch-action-hist.tc | 50 + .../trigger-onmatch-onmax-action-hist.tc | 50 + .../inter-event/trigger-onmax-action-hist.tc | 48 + .../trigger-synthetic-event-createremove.tc | 46 + 21 files changed, 7115 insertions(+), 2123 deletions(-) create mode 100644 Documentation/trace/histogram.txt create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-createremove.tc -- 1.9.3