LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
	lgirdwood@gmail.com, broonie@kernel.org,
	mazziesaccount@gmail.com, matti.vaittinen@fi.rohmeurope.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	heikki.haikola@fi.rohmeurope.com,
	mikko.mutanen@fi.rohmeurope.com
Subject: [PATCH 0/8] regulator/mfd/dt_bindings: bd718x7: Support ROHM bd71847
Date: Wed, 29 Aug 2018 15:35:38 +0300
Message-ID: <cover.1535545377.git.matti.vaittinen@fi.rohmeurope.com> (raw)

Patch series adding support for ROHM BD71847 PMIC.

ROHM BD71847 is modified version of ROHM BD71837 Power Management IC.
BD71847 integrates 6 buck regulators and 6  LDO’s.

The patch series adds support for BD71847 in BD71837 driver. It also
extends BD71837 to support all BUCK/LDO output voltages.

Support for "pickable voltage ranges" is introduced in order to fully
support BD71837/BD71847 voltage selection registers. Some of the voltage
regulators provide different multiple voltage ranges and output voltage
is determined by range selection bit(s) and voltage selection bits
instead of plain voltage selection bits.

Patch 1:
	BD71837/BD71847 voltage monitoring fix.
Patch 2:
	limited BD71847 support (without range selection)
Patch 3:
	BD71847 device-tree bindings for regulators
Patch 4:
	BD71847 device-tree bindings for mfd
Patch 5:
	Voltage range selection support to regulator helpers
Patch 6:
	Simple renaming plenty of BD71837 occurrences to BD718XX
Patch 7:
	BD71837/BD71847 Full voltage range support using helpers from
	patch 5
Patch 8:
	Renaming bd71837 regulator driver to bd718x7

this patch series is based on linux-next tag next-20180823.

Matti Vaittinen (8):
  regulator: bd71837: Disable voltage monitoring for LDO3/4
  regulator: Support ROHM BD71847 power management IC
  regulator: dt bindings: add BD71847 device-tree binding documentation
  mfd: dt bindings: add BD71847 device-tree binding documentation
  regulator: Support regulators where voltage ranges are selectable
  regulator/mfd: bd718xx: rename bd71837/bd71847 common instances
  regulator: bd718XX use pickable ranges
  regulator: bd718xx: renme bd71837 to 718xx

 .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt  |   17 +-
 .../bindings/regulator/rohm,bd71837-regulator.txt  |   12 +-
 drivers/mfd/rohm-bd718x7.c                         |  182 ++--
 drivers/regulator/Kconfig                          |    2 +-
 drivers/regulator/Makefile                         |    2 +-
 drivers/regulator/bd71837-regulator.c              |  626 -----------
 drivers/regulator/bd718x7-regulator.c              | 1138 ++++++++++++++++++++
 drivers/regulator/core.c                           |    5 +
 drivers/regulator/helpers.c                        |  232 ++++
 include/linux/mfd/rohm-bd718x7.h                   |  375 +++----
 include/linux/regulator/driver.h                   |   20 +-
 11 files changed, 1714 insertions(+), 897 deletions(-)
 delete mode 100644 drivers/regulator/bd71837-regulator.c
 create mode 100644 drivers/regulator/bd718x7-regulator.c

-- 
2.14.3


             reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-29 12:35 Matti Vaittinen [this message]
2018-08-29 12:36 ` [PATCH 1/8] regulator: bd71837: Disable voltage monitoring for LDO3/4 Matti Vaittinen
2018-09-11 12:40   ` Lee Jones
2018-09-12  7:47     ` Matti Vaittinen
2018-09-12  8:42       ` Lee Jones
2018-09-12  8:53         ` Matti Vaittinen
2018-09-12 10:23           ` Mark Brown
2018-09-12 10:44             ` Lee Jones
2018-08-29 12:36 ` [PATCH 2/8] regulator: Support ROHM BD71847 power management IC Matti Vaittinen
2018-09-11 13:48   ` Lee Jones
2018-09-12  6:37     ` Matti Vaittinen
2018-08-29 12:37 ` [PATCH 3/8] regulator: dt bindings: add BD71847 device-tree binding documentation Matti Vaittinen
2018-08-29 12:37 ` [PATCH 4/8] mfd: " Matti Vaittinen
2018-09-11 13:49   ` Lee Jones
2018-09-12  7:43     ` Matti Vaittinen
2018-08-29 12:38 ` [PATCH 5/8] regulator: Support regulators where voltage ranges are selectable Matti Vaittinen
2018-08-29 12:38 ` [PATCH 6/8] regulator/mfd: bd718xx: rename bd71837/bd71847 common instances Matti Vaittinen
2018-09-11 13:51   ` Lee Jones
2018-08-29 12:39 ` [PATCH 7/8] regulator: bd718XX use pickable ranges Matti Vaittinen
2018-09-11 13:55   ` Lee Jones
2018-09-12  7:41     ` Matti Vaittinen
2018-08-29 12:39 ` [PATCH 8/8] regulator: bd718xx: renme bd71837 to 718xx Matti Vaittinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1535545377.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heikki.haikola@fi.rohmeurope.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mikko.mutanen@fi.rohmeurope.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git