From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
lgirdwood@gmail.com, broonie@kernel.org,
mazziesaccount@gmail.com, matti.vaittinen@fi.rohmeurope.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
heikki.haikola@fi.rohmeurope.com,
mikko.mutanen@fi.rohmeurope.com, sboyd@kernel.org
Subject: [PATCH v2 0/7] regulator/mfd/dt_bindings: bd718x7: Support ROHM bd71847
Date: Wed, 12 Sep 2018 14:43:59 +0300 [thread overview]
Message-ID: <cover.1536750863.git.matti.vaittinen@fi.rohmeurope.com> (raw)
Patch series adding support for ROHM BD71847 PMIC.
ROHM BD71847 is modified version of ROHM BD71837 Power Management IC.
BD71847 integrates 6 buck regulators and 6 LDO’s.
The patch series adds support for BD71847 in BD71837 driver. It also
extends BD71837 to support all BUCK/LDO output voltages.
Support for "pickable voltage ranges" is introduced in order to fully
support BD71837/BD71847 voltage selection registers. Some of the voltage
regulators provide different multiple voltage ranges and output voltage
is determined by range selection bit(s) and voltage selection bits
instead of plain voltage selection bits.
Changelog v2
- Dropped first patch (voltage monitoring fix) and "rebased" on top of
next-20180912 because first patch was already applied.
- Fixed two commit message typos.
Fixes based on comments from Lee Jones
- removed PMIC revision check.
- stored chip type directly to data pointer
- minor readability improvement to DT binding
- unified naming for last enum members
- moved unrelated changes from pickable ranges patch
- removed C++ style comment
Patch 2:
limited BD71847 support (without range selection)
Patch 3:
BD71847 device-tree bindings for regulators
Patch 4:
BD71847 device-tree bindings for mfd
Patch 5:
Voltage range selection support to regulator helpers
Patch 6:
Simple renaming plenty of BD71837 occurrences to BD718XX
Patch 7:
BD71837/BD71847 Full voltage range support using helpers from
patch 5
Patch 8:
Renaming bd71837 regulator driver to bd718x7
this patch series is based on linux-next tag next-20180912.
Matti Vaittinen (7):
regulator: Support ROHM BD71847 power management IC
regulator: dt bindings: add BD71847 device-tree binding documentation
mfd: dt bindings: add BD71847 device-tree binding documentation
regulator: Support regulators where voltage ranges are selectable
regulator/mfd: bd718xx: rename bd71837/bd71847 common instances
regulator: bd718XX use pickable ranges
regulator: bd718xx: rename bd71837 to 718xx
.../devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 17 +-
.../bindings/regulator/rohm,bd71837-regulator.txt | 12 +-
drivers/mfd/rohm-bd718x7.c | 160 ++-
drivers/regulator/Kconfig | 2 +-
drivers/regulator/Makefile | 2 +-
drivers/regulator/bd71837-regulator.c | 644 -----------
drivers/regulator/bd718x7-regulator.c | 1138 ++++++++++++++++++++
drivers/regulator/core.c | 5 +
drivers/regulator/helpers.c | 232 ++++
include/linux/mfd/rohm-bd718x7.h | 333 +++---
include/linux/regulator/driver.h | 20 +-
11 files changed, 1644 insertions(+), 921 deletions(-)
delete mode 100644 drivers/regulator/bd71837-regulator.c
create mode 100644 drivers/regulator/bd718x7-regulator.c
--
2.14.3
next reply other threads:[~2018-09-12 11:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-12 11:43 Matti Vaittinen [this message]
2018-09-12 11:44 ` [PATCH v2 1/7] regulator: Support ROHM BD71847 power management IC Matti Vaittinen
2018-09-13 16:51 ` kbuild test robot
2018-09-12 11:47 ` [PATCH v2 2/7] regulator: dt bindings: add BD71847 device-tree binding documentation Matti Vaittinen
2018-09-12 11:49 ` [PATCH v2 3/7] mfd: " Matti Vaittinen
2018-09-12 11:50 ` [PATCH v2 4/7] regulator: Support regulators where voltage ranges are selectable Matti Vaittinen
2018-09-12 11:51 ` [PATCH v2 5/7] regulator/mfd: bd718xx: rename bd71837/bd71847 common instances Matti Vaittinen
2018-09-13 20:39 ` kbuild test robot
2018-09-14 5:42 ` Matti Vaittinen
2018-09-12 11:52 ` [PATCH v2 6/7] regulator: bd718XX use pickable ranges Matti Vaittinen
2018-09-12 11:54 ` [PATCH v2 7/7] regulator: bd718xx: rename bd71837 to 718xx Matti Vaittinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1536750863.git.matti.vaittinen@fi.rohmeurope.com \
--to=matti.vaittinen@fi.rohmeurope.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heikki.haikola@fi.rohmeurope.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mazziesaccount@gmail.com \
--cc=mikko.mutanen@fi.rohmeurope.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).