[PATCH 0/1] phy: fsl-imx8-mipi-dphy: Hook into runtime pm

[PATCH 0/1] phy: fsl-imx8-mipi-dphy: Hook into runtime pm

[Guido Günther]

This allows us to shut down the mipi power domain on the SOC.  The
alternative would be to drop the dphy from the mipi power domain in the
SOCs device tree and only have the DSI host controller visible there
(and rely on the phy layer's built in runtime pm handling) but this
makes the power domain dependency less explicit.

Currently the pm domain can't be shut off when blanking the panel:

pm_genpd_summary
domain                          status          slaves
    /device                                             runtime status
----------------------------------------------------------------------
mipi                            on
    /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy  unsupported
    /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi  suspended

while with this we can shut down the power domain on panel blank:

mipi                            off-0
    /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy  suspended
    /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi  suspended

This is similar to what drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
does.

Patch is against next-20200217

Guido Günther (1):
  phy: fsl-imx8-mipi-dphy: Hook into runtime pm

 .../phy/freescale/phy-fsl-imx8-mipi-dphy.c    | 22 ++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

-- 
2.23.0

[PATCH 1/1] phy: fsl-imx8-mipi-dphy: Hook into runtime pm

[Guido Günther]

This allows us to shut down the mipi power domain on the SOC.  The
alternative would be to drop the dphy from the mipi power domain in the
SOCs device tree and only have the DSI host controller visible there
(and rely on the phy layer's built in runtime pm handling) but this
would make the power domain dependency less explicit.

Currently the pm domain can't be shut off when blanking the panel:

pm_genpd_summary
domain                          status          slaves
    /device                                             runtime status
----------------------------------------------------------------------
mipi                            on
    /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy  unsupported
    /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi  suspended

while with this change we can shut down the power domain on panel blank:

mipi                            off-0
    /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy  suspended
    /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi  suspended

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 .../phy/freescale/phy-fsl-imx8-mipi-dphy.c    | 22 ++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
index 9f2c1da14f5a..75bfcc49466f 100644
--- a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -14,6 +14,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
 /* DPHY registers */
@@ -93,6 +94,7 @@ struct mixel_dphy_cfg {
 };
 
 struct mixel_dphy_priv {
+	struct device *dev;
 	struct mixel_dphy_cfg cfg;
 	struct regmap *regmap;
 	struct clk *phy_ref_clk;
@@ -382,6 +384,7 @@ static int mixel_dphy_power_on(struct phy *phy)
 	ret = clk_prepare_enable(priv->phy_ref_clk);
 	if (ret < 0)
 		return ret;
+	pm_runtime_get_sync(priv->dev);
 
 	phy_write(phy, PWR_ON, DPHY_PD_PLL);
 	ret = regmap_read_poll_timeout(priv->regmap, DPHY_LOCK, locked,
@@ -395,6 +398,7 @@ static int mixel_dphy_power_on(struct phy *phy)
 
 	return 0;
 clock_disable:
+	pm_runtime_put(priv->dev);
 	clk_disable_unprepare(priv->phy_ref_clk);
 	return ret;
 }
@@ -406,6 +410,7 @@ static int mixel_dphy_power_off(struct phy *phy)
 	phy_write(phy, PWR_OFF, DPHY_PD_PLL);
 	phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
 
+	pm_runtime_put(priv->dev);
 	clk_disable_unprepare(priv->phy_ref_clk);
 
 	return 0;
@@ -469,6 +474,7 @@ static int mixel_dphy_probe(struct platform_device *pdev)
 	dev_dbg(dev, "phy_ref clock rate: %lu\n",
 		clk_get_rate(priv->phy_ref_clk));
 
+	priv->dev = dev;
 	dev_set_drvdata(dev, priv);
 
 	phy = devm_phy_create(dev, np, &mixel_dphy_phy_ops);
@@ -479,12 +485,26 @@ static int mixel_dphy_probe(struct platform_device *pdev)
 	phy_set_drvdata(phy, priv);
 
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
 
-	return PTR_ERR_OR_ZERO(phy_provider);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static int mixel_dphy_remove(struct platform_device *pdev)
+{
+	struct mixel_dphy_priv *priv = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(priv->dev);
+
+	return 0;
 }
 
 static struct platform_driver mixel_dphy_driver = {
 	.probe	= mixel_dphy_probe,
+	.remove = mixel_dphy_remove,
 	.driver = {
 		.name = "mixel-mipi-dphy",
 		.of_match_table	= mixel_dphy_of_match,
-- 
2.23.0

Re: [PATCH 0/1] phy: fsl-imx8-mipi-dphy: Hook into runtime pm

[Guido Günther]

Hi,
On Tue, Feb 25, 2020 at 04:53:33PM +0100, Guido Günther wrote:
> This allows us to shut down the mipi power domain on the SOC.  The
> alternative would be to drop the dphy from the mipi power domain in the
> SOCs device tree and only have the DSI host controller visible there
> (and rely on the phy layer's built in runtime pm handling) but this
> makes the power domain dependency less explicit.
> 
> Currently the pm domain can't be shut off when blanking the panel:

Anything I can do to get this applied?
Cheers,
 -- Guido

> 
> pm_genpd_summary
> domain                          status          slaves
>     /device                                             runtime status
> ----------------------------------------------------------------------
> mipi                            on
>     /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy  unsupported
>     /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi  suspended
> 
> while with this we can shut down the power domain on panel blank:
> 
> mipi                            off-0
>     /devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy  suspended
>     /devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi  suspended
> 
> This is similar to what drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
> does.
> 
> Patch is against next-20200217
> 
> Guido Günther (1):
>   phy: fsl-imx8-mipi-dphy: Hook into runtime pm
> 
>  .../phy/freescale/phy-fsl-imx8-mipi-dphy.c    | 22 ++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)
> 
> -- 
> 2.23.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel