From: Jonathan McDowell <noodles@earth.li>
To: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 0/3] Add initial support for MikroTik RB3011
Date: Mon, 18 May 2020 19:09:10 +0100 [thread overview]
Message-ID: <cover.1589824955.git.noodles@earth.li> (raw)
This patches do some prep (device tree vendor addition, missing ethernet
definitions for IPQ8064 dts) and then add an initial device tree for the
MikroTik RB3011 1U router, which is an IPQ8064 device with 1G RAM. They
are sufficient to boot with an initrd, the serial console and the first
5 switch ports fully functional (the second bank of 5 require some extra
patches to the QCA8K driver which will follow later). The bootloader NOR
is also supported, but the 128MB NAND is not yet enabled.
Jonathan McDowell (3):
dt-bindings: vendor-prefixes: Add MikroTik
ARM: dts: qcom: add ethernet definitions to ipq8064
ARM: dts: qcom: Add MikroTik RB3011
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 308 ++++++++++++++++++
arch/arm/boot/dts/qcom-ipq8064.dtsi | 108 ++++++
4 files changed, 419 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
--
2.20.1
next reply other threads:[~2020-05-18 18:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-18 18:09 Jonathan McDowell [this message]
2020-05-18 18:09 ` [PATCH 1/3] dt-bindings: vendor-prefixes: Add MikroTik Jonathan McDowell
2020-05-28 20:55 ` Rob Herring
2020-05-18 18:09 ` [PATCH 2/3] ARM: dts: qcom: add ethernet definitions to ipq8064 Jonathan McDowell
2020-05-18 18:10 ` [PATCH 3/3] ARM: dts: qcom: Add MikroTik RB3011 Jonathan McDowell
2020-05-29 3:20 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1589824955.git.noodles@earth.li \
--to=noodles@earth.li \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).