From: "Rafał Miłecki" <rafal@milecki.pl>
To: Rabin Vincent <rabin.vincent@axis.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com>,
Maxime Coquelin <maxime.coquelin@st.com>,
Patrice Chotard <patrice.chotard@st.com>,
tglx@linutronix.de, Hauke Mehrtens <hauke@hauke-m.de>
Subject: DIfferent BogoMIPS value after bbaa06702719 ("clocksource/drivers/arm_global_timer: Register delay timer")
Date: Thu, 2 Mar 2017 14:36:23 +0100 [thread overview]
Message-ID: <d22ec429-1a71-e56f-e1d7-28b066be8c1b@milecki.pl> (raw)
Hi,
I just updated kernel on my SmartRG SR400ac (bcm4708-smartrg-sr400ac.dts) from
4.4 to 4.9 and noticed that this part of the log:
[ 0.020820] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
(...)
[ 0.190806] Brought up 2 CPUs
[ 0.200022] SMP: Total of 2 processors activated (3188.32 BogoMIPS).
became:
[ 0.027082] Calibrating delay loop (skipped), value calculated using timer frequency.. 800.00 BogoMIPS (lpj=4000000)
(...)
[ 0.078858] Brought up 2 CPUs
[ 0.088254] SMP: Total of 2 processors activated (1600.00 BogoMIPS).
This is caused by commit bbaa06702719 ("clocksource/drivers/arm_global_timer:
Register delay timer").
Is this something expected? Or should I be worried about this? I'm aware it's
just BogoMIPS, but I still prefer to ask :)
Boot log from 4.9.13
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.13 (zajec@linux-samsung.lan) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3346+1-9eacb9d7fc) ) #0 SMP Wed Mar 1 14:40:17 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: SmartRG SR400ac
[ 0.000000] earlycon: ns16550 at MMIO 0x18000300 (options '')
[ 0.000000] bootconsole [ns16550] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
[ 0.000000] percpu: Embedded 12 pages/cpu @c6dd7000 s17868 r8192 d23092 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65280
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 254860K/262144K available (3409K kernel code, 104K rwdata, 892K rodata, 228K init, 293K bss, 7284K reserved, 0K cma-reserved, 131072K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc035ca48 (3411 kB)
[ 0.000000] .init : 0xc043d000 - 0xc0476000 ( 228 kB)
[ 0.000000] .data : 0xc0476000 - 0xc0490180 ( 105 kB)
[ 0.000000] .bss : 0xc0490180 - 0xc04d95e0 ( 294 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x0a530000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[ 0.000016] sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 4398046511103ns
[ 0.008678] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns
[ 0.020820] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
[ 0.113646] pid_max: default: 32768 minimum: 301
[ 0.118723] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.125908] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.134089] CPU: Testing write buffer coherency: ok
[ 0.139608] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.145842] Setting up static identity map for 0x82a0 - 0x82d4
[ 0.190681] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.190806] Brought up 2 CPUs
[ 0.200022] SMP: Total of 2 processors activated (3188.32 BogoMIPS).
Boot log from 4.9.13 with bbaa06702719 reverted
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.13 (zajec@linux-samsung.lan) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3346+1-9eacb9d7fc) ) #0 SMP Wed Mar 1 14:40:17 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: SmartRG SR400ac
[ 0.000000] earlycon: ns16550 at MMIO 0x18000300 (options '')
[ 0.000000] bootconsole [ns16550] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
[ 0.000000] percpu: Embedded 12 pages/cpu @c6dd7000 s17868 r8192 d23092 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65280
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 254860K/262144K available (3409K kernel code, 104K rwdata, 892K rodata, 228K init, 293K bss, 7284K reserved, 0K cma-reserved, 131072K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc035ca68 (3411 kB)
[ 0.000000] .init : 0xc043d000 - 0xc0476000 ( 228 kB)
[ 0.000000] .data : 0xc0476000 - 0xc0490180 ( 105 kB)
[ 0.000000] .bss : 0xc0490180 - 0xc04d95e0 ( 294 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x0a530000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[ 0.000015] sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 4398046511103ns
[ 0.008567] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns
[ 0.020571] Switching to timer-based delay loop, resolution 2ns
[ 0.027082] Calibrating delay loop (skipped), value calculated using timer frequency.. 800.00 BogoMIPS (lpj=4000000)
[ 0.038359] pid_max: default: 32768 minimum: 301
[ 0.043367] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050561] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.058779] CPU: Testing write buffer coherency: ok
[ 0.064363] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.070593] Setting up static identity map for 0x82a0 - 0x82d4
[ 0.078744] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.078858] Brought up 2 CPUs
[ 0.088254] SMP: Total of 2 processors activated (1600.00 BogoMIPS).
next reply other threads:[~2017-03-02 20:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-02 13:36 Rafał Miłecki [this message]
2017-03-02 14:13 ` DIfferent BogoMIPS value after bbaa06702719 ("clocksource/drivers/arm_global_timer: Register delay timer") Russell King - ARM Linux
2017-03-02 17:46 ` Rafał Miłecki
2017-03-02 14:13 ` Rabin Vincent
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d22ec429-1a71-e56f-e1d7-28b066be8c1b@milecki.pl \
--to=rafal@milecki.pl \
--cc=daniel.lezcano@linaro.org \
--cc=hauke@hauke-m.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.coquelin@st.com \
--cc=patrice.chotard@st.com \
--cc=rabin.vincent@axis.com \
--cc=srinivas.kandagatla@gmail.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).