[PATCH v1, 0/1] fix gce timeout issue

[PATCH v1, 0/1] fix gce timeout issue

[Yongqiang Niu]

base linux v5.17-rc1

Yongqiang Niu (1):
  mailbox: mtk-cmdq: fix gce timeout issue

 drivers/mailbox/mtk-cmdq-mailbox.c | 57 ++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 6 deletions(-)

-- 
2.25.1

[PATCH v1, 1/1] mailbox: mtk-cmdq: fix gce timeout issue

[Yongqiang Niu]

From: Yongqiang Niu <yongqiang.niu@mediatek.corp-partner.google.com>

1. enable gce ddr enable(gce reigster offset 0x48, bit 16 to 18) when gce work,
and disable gce ddr enable when gce work job done
2. split cmdq clk enable/disable api, and control gce ddr enable/disable
in clk enable/disable function to make sure it could protect when cmdq
is multiple used by display and mdp

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.corp-partner.google.com>
Signed-off-by: Allen-kh Cheng <allen-kh.cheng@mediatek.corp-partner.google.com>
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 57 ++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 6 deletions(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 2578e5aaa935..64a47470f062 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -81,6 +81,8 @@ struct cmdq {
 	u8			shift_pa;
 	bool			control_by_sw;
 	u32			gce_num;
+	atomic_t		usage;
+	spinlock_t		lock;
 };
 
 struct gce_plat {
@@ -90,6 +92,46 @@ struct gce_plat {
 	u32 gce_num;
 };
 
+static s32 cmdq_clk_enable(struct cmdq *cmdq)
+{
+	s32 usage, ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cmdq->lock, flags);
+
+	usage = atomic_inc_return(&cmdq->usage);
+
+	ret = clk_bulk_enable(cmdq->gce_num, cmdq->clocks);
+	if (usage <=0 || ret < 0) {
+		dev_err(cmdq->mbox.dev, "ref count %d ret %d suspend %d\n",
+			usage, ret, cmdq->suspended);
+	} else if (usage == 1) {
+		if (cmdq->control_by_sw)
+			writel((0x7 << 16) + 0x7, cmdq->base + GCE_GCTL_VALUE);
+	}
+
+	spin_unlock_irqrestore(&cmdq->lock, flags);
+
+	return ret;
+}
+
+static void cmdq_clk_disable(struct cmdq *cmdq)
+{
+	s32 usage;
+
+	usage = atomic_dec_return(&cmdq->usage);
+
+	if (usage < 0) {
+		dev_err(cmdq->mbox.dev, "ref count %d suspend %d\n",
+			usage, cmdq->suspended);
+	} else if (usage == 0) {
+		if (cmdq->control_by_sw)
+			writel(0x7, cmdq->base + GCE_GCTL_VALUE);
+	}
+
+	clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
+}
+
 u8 cmdq_get_shift_pa(struct mbox_chan *chan)
 {
 	struct cmdq *cmdq = container_of(chan->mbox, struct cmdq, mbox);
@@ -271,7 +313,8 @@ static void cmdq_thread_irq_handler(struct cmdq *cmdq,
 
 	if (list_empty(&thread->task_busy_list)) {
 		cmdq_thread_disable(cmdq, thread);
-		clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
+
+		cmdq_clk_disable(cmdq);
 	}
 }
 
@@ -360,8 +403,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
 	task->pkt = pkt;
 
 	if (list_empty(&thread->task_busy_list)) {
-		WARN_ON(clk_bulk_enable(cmdq->gce_num, cmdq->clocks));
-
+		WARN_ON(cmdq_clk_enable(cmdq) < 0);
 		/*
 		 * The thread reset will clear thread related register to 0,
 		 * including pc, end, priority, irq, suspend and enable. Thus
@@ -433,7 +475,7 @@ static void cmdq_mbox_shutdown(struct mbox_chan *chan)
 	}
 
 	cmdq_thread_disable(cmdq, thread);
-	clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
+	cmdq_clk_disable(cmdq);
 
 done:
 	/*
@@ -479,7 +521,8 @@ static int cmdq_mbox_flush(struct mbox_chan *chan, unsigned long timeout)
 
 	cmdq_thread_resume(thread);
 	cmdq_thread_disable(cmdq, thread);
-	clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
+
+	cmdq_clk_disable(cmdq);
 
 out:
 	spin_unlock_irqrestore(&thread->chan->lock, flags);
@@ -490,7 +533,8 @@ static int cmdq_mbox_flush(struct mbox_chan *chan, unsigned long timeout)
 	spin_unlock_irqrestore(&thread->chan->lock, flags);
 	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_ENABLE_TASK,
 				      enable, enable == 0, 1, timeout)) {
-		dev_err(cmdq->mbox.dev, "Fail to wait GCE thread 0x%x done\n",
+		dev_err(cmdq->mbox.dev,
+			"Fail to wait GCE thread 0x%x done\n",
 			(u32)(thread->base - cmdq->base));
 
 		return -EFAULT;
@@ -626,6 +670,7 @@ static int cmdq_probe(struct platform_device *pdev)
 
 	WARN_ON(clk_bulk_prepare(cmdq->gce_num, cmdq->clocks));
 
+	spin_lock_init(&cmdq->lock);
 	cmdq_init(cmdq);
 
 	return 0;
-- 
2.25.1

Re: [PATCH v1, 0/1] fix gce timeout issue

[Allen-KH Cheng]

Hi Yongqiang,

Please don't send cover letters for single patches, thanks.

https://lore.kernel.org/all/YuJsDI8rqkHuysIT@sirena.org.uk/

BRs,
Allen

On Mon, 2022-08-15 at 11:07 +0800, Yongqiang Niu wrote:
> base linux v5.17-rc1
> 
> Yongqiang Niu (1):
>   mailbox: mtk-cmdq: fix gce timeout issue
> 
>  drivers/mailbox/mtk-cmdq-mailbox.c | 57 ++++++++++++++++++++++++++
> ----
>  1 file changed, 51 insertions(+), 6 deletions(-)
> 

Re: [PATCH v1, 0/1] fix gce timeout issue

[Hsin-Yi Wang]

On Mon, Aug 15, 2022 at 11:07 AM Yongqiang Niu
<yongqiang.niu@mediatek.com> wrote:
>
> base linux v5.17-rc1
Can you base it on newer version?

>
> Yongqiang Niu (1):
>   mailbox: mtk-cmdq: fix gce timeout issue
>
>  drivers/mailbox/mtk-cmdq-mailbox.c | 57 ++++++++++++++++++++++++++----
>  1 file changed, 51 insertions(+), 6 deletions(-)
>
> --
> 2.25.1
>

Re: [PATCH v1, 1/1] mailbox: mtk-cmdq: fix gce timeout issue

[CK Hu]

Hi, Yongqiang:


On Mon, 2022-08-15 at 11:07 +0800, Yongqiang Niu wrote:
> From: Yongqiang Niu <yongqiang.niu@mediatek.corp-partner.google.com>
> 
> 1. enable gce ddr enable(gce reigster offset 0x48, bit 16 to 18) when
> gce work,
> and disable gce ddr enable when gce work job done

Why need gce ddr enable? I think gce works fine without this. Describe
more about this.

Regards,
CK

> 2. split cmdq clk enable/disable api, and control gce ddr
> enable/disable
> in clk enable/disable function to make sure it could protect when
> cmdq
> is multiple used by display and mdp
> 
> Signed-off-by: Yongqiang Niu <
> yongqiang.niu@mediatek.corp-partner.google.com>
> Signed-off-by: Allen-kh Cheng <
> allen-kh.cheng@mediatek.corp-partner.google.com>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c | 57 ++++++++++++++++++++++++++
> ----
>  1 file changed, 51 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c
> b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 2578e5aaa935..64a47470f062 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -81,6 +81,8 @@ struct cmdq {
>  	u8			shift_pa;
>  	bool			control_by_sw;
>  	u32			gce_num;
> +	atomic_t		usage;
> +	spinlock_t		lock;
>  };
>  
>  struct gce_plat {
> @@ -90,6 +92,46 @@ struct gce_plat {
>  	u32 gce_num;
>  };
>  
> +static s32 cmdq_clk_enable(struct cmdq *cmdq)
> +{
> +	s32 usage, ret;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&cmdq->lock, flags);
> +
> +	usage = atomic_inc_return(&cmdq->usage);
> +
> +	ret = clk_bulk_enable(cmdq->gce_num, cmdq->clocks);
> +	if (usage <=0 || ret < 0) {
> +		dev_err(cmdq->mbox.dev, "ref count %d ret %d suspend
> %d\n",
> +			usage, ret, cmdq->suspended);
> +	} else if (usage == 1) {
> +		if (cmdq->control_by_sw)
> +			writel((0x7 << 16) + 0x7, cmdq->base +
> GCE_GCTL_VALUE);
> +	}
> +
> +	spin_unlock_irqrestore(&cmdq->lock, flags);
> +
> +	return ret;
> +}
> +
> +static void cmdq_clk_disable(struct cmdq *cmdq)
> +{
> +	s32 usage;
> +
> +	usage = atomic_dec_return(&cmdq->usage);
> +
> +	if (usage < 0) {
> +		dev_err(cmdq->mbox.dev, "ref count %d suspend %d\n",
> +			usage, cmdq->suspended);
> +	} else if (usage == 0) {
> +		if (cmdq->control_by_sw)
> +			writel(0x7, cmdq->base + GCE_GCTL_VALUE);
> +	}
> +
> +	clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
> +}
> +
>  u8 cmdq_get_shift_pa(struct mbox_chan *chan)
>  {
>  	struct cmdq *cmdq = container_of(chan->mbox, struct cmdq,
> mbox);
> @@ -271,7 +313,8 @@ static void cmdq_thread_irq_handler(struct cmdq
> *cmdq,
>  
>  	if (list_empty(&thread->task_busy_list)) {
>  		cmdq_thread_disable(cmdq, thread);
> -		clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
> +
> +		cmdq_clk_disable(cmdq);
>  	}
>  }
>  
> @@ -360,8 +403,7 @@ static int cmdq_mbox_send_data(struct mbox_chan
> *chan, void *data)
>  	task->pkt = pkt;
>  
>  	if (list_empty(&thread->task_busy_list)) {
> -		WARN_ON(clk_bulk_enable(cmdq->gce_num, cmdq->clocks));
> -
> +		WARN_ON(cmdq_clk_enable(cmdq) < 0);
>  		/*
>  		 * The thread reset will clear thread related register
> to 0,
>  		 * including pc, end, priority, irq, suspend and
> enable. Thus
> @@ -433,7 +475,7 @@ static void cmdq_mbox_shutdown(struct mbox_chan
> *chan)
>  	}
>  
>  	cmdq_thread_disable(cmdq, thread);
> -	clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
> +	cmdq_clk_disable(cmdq);
>  
>  done:
>  	/*
> @@ -479,7 +521,8 @@ static int cmdq_mbox_flush(struct mbox_chan
> *chan, unsigned long timeout)
>  
>  	cmdq_thread_resume(thread);
>  	cmdq_thread_disable(cmdq, thread);
> -	clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
> +
> +	cmdq_clk_disable(cmdq);
>  
>  out:
>  	spin_unlock_irqrestore(&thread->chan->lock, flags);
> @@ -490,7 +533,8 @@ static int cmdq_mbox_flush(struct mbox_chan
> *chan, unsigned long timeout)
>  	spin_unlock_irqrestore(&thread->chan->lock, flags);
>  	if (readl_poll_timeout_atomic(thread->base +
> CMDQ_THR_ENABLE_TASK,
>  				      enable, enable == 0, 1, timeout))
> {
> -		dev_err(cmdq->mbox.dev, "Fail to wait GCE thread 0x%x
> done\n",
> +		dev_err(cmdq->mbox.dev,
> +			"Fail to wait GCE thread 0x%x done\n",
>  			(u32)(thread->base - cmdq->base));
>  
>  		return -EFAULT;
> @@ -626,6 +670,7 @@ static int cmdq_probe(struct platform_device
> *pdev)
>  
>  	WARN_ON(clk_bulk_prepare(cmdq->gce_num, cmdq->clocks));
>  
> +	spin_lock_init(&cmdq->lock);
>  	cmdq_init(cmdq);
>  
>  	return 0;