linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Patrice CHOTARD <patrice.chotard@foss.st.com>
To: Dillon Min <dillon.minfei@gmail.com>
Cc: <pierre-yves.mordret@foss.st.com>, <alain.volmat@foss.st.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre TORGUE <alexandre.torgue@foss.st.com>,
	Sumit Semwal <sumit.semwal@linaro.org>,
	<christian.koenig@amd.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, <linux-i2c@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-media <linux-media@vger.kernel.org>,
	"open list:DRM PANEL DRIVERS" <dri-devel@lists.freedesktop.org>,
	<linaro-mm-sig@lists.linaro.org>,
	linux-clk <linux-clk@vger.kernel.org>
Subject: Re: [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform
Date: Tue, 1 Jun 2021 10:00:30 +0200	[thread overview]
Message-ID: <d40c6e04-6b32-e9a2-e87d-ef0004d5139c@foss.st.com> (raw)
In-Reply-To: <CAL9mu0+JGZJKDiadvX3dsK27Tpyjh02CO38ip486OwfeVOT7Sg@mail.gmail.com>

[-- Attachment #1: Type: text/plain, Size: 18083 bytes --]

Hi Dillon

On 6/1/21 5:28 AM, Dillon Min wrote:
> Hi Patrice
> 
> On Mon, May 31, 2021 at 10:58 PM Patrice CHOTARD
> <patrice.chotard@foss.st.com> wrote:
>>
>> Hi Dillon
>>
>> On 5/31/21 4:29 PM, Dillon Min wrote:
>>> Hi Patrice
>>>
>>> On Mon, May 31, 2021 at 9:51 PM Patrice CHOTARD
>>> <patrice.chotard@foss.st.com> wrote:
>>>>
>>>>
>>>>
>>>> On 5/31/21 3:38 PM, Dillon Min wrote:
>>>>> Hi Patrice
>>>>>
>>>>> Thanks for your time to test my patch.
>>>>>
>>>>> On Mon, May 31, 2021 at 9:20 PM Patrice CHOTARD
>>>>> <patrice.chotard@foss.st.com> wrote:
>>>>>>
>>>>>> Hi Dillon
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 5/14/21 1:02 PM, dillon.minfei@gmail.com wrote:
>>>>>>> From: Dillon Min <dillon.minfei@gmail.com>
>>>>>>>
>>>>>>> This seriese fix three i2c/clk bug for stm32 f4/f7
>>>>>>> - kernel runing in sdram, i2c driver get data timeout
>>>>>>> - ltdc clk turn off after kernel console active
>>>>>>> - kernel hang in set ltdc clock rate
>>>>>>>
>>>>>>> clk bug found on stm32f429/f469-disco board
>>>>>>>
>>>>>>> Hi Patrice:
>>>>>>> below is the guide to verify the patch:
>>>>>>>
>>>>>>> setup test env with following files(link at below 'files link'):
>>>>>>> [1] u-boot-dtb.bin
>>>>>>> [2] rootfs zip file (used in kernel initramfs)
>>>>>>> [3] u-boot's mkimage to create itb file
>>>>>>> [4] kernel config file
>>>>>>> [5] my itb with-or-without i2c patch
>>>>>>>
>>>>>>> This patch based on kernel commit:
>>>>>>> 88b06399c9c766c283e070b022b5ceafa4f63f19
>>>>>>>
>>>>>>> Note:
>>>>>>> panel-ilitek-ili9341.c is the driver which was submitted last year, but not
>>>>>>> get accepted. it's used to setup touch screen calibration, then test i2c.
>>>>>>>
>>>>>>> create itb file(please correct path of 'data'):
>>>>>>> ./mkimage -f stm32.its stm32.itb
>>>>>>>
>>>>>>> HW setup:
>>>>>>> console:
>>>>>>>        PA9, PA10
>>>>>>>        usart0
>>>>>>>        serial@40011000
>>>>>>>        115200 8n1
>>>>>>>
>>>>>>> -- flash u-boot.bin to stm32f429-disco on PC
>>>>>>> $ sudo openocd -f board/stm32f429discovery.cfg -c \
>>>>>>>   '{PATH-TO-YOUR-UBOOT}/u-boot-dtb.bin 0x08000000 exit reset'
>>>>>>>
>>>>>>> -- setup kernel load bootargs at u-boot
>>>>>>> U-Boot > setenv bootargs 'console=tty0 console=ttySTM0,115200
>>>>>>>                     root=/dev/ram rdinit=/linuxrc loglevel=8 fbcon=rotate:2'
>>>>>>> U-Boot > loady;bootm
>>>>>>> (download stm32.dtb or your kernel with itb format, or download zImage, dtb)
>>>>>>>
>>>>>>
>>>>>>
>>>>>> Thanks for these informations
>>>>>> I was able to load and boot DTB and uImage directly in SDRAM as you suggested,
>>>>>> i saw Linux logo and kernel log on the STM32F429-disco display,
>>>>>> but i can't reach the login.
>>>>>>
>>>>>> The last kernel log i got is :
>>>>>>
>>>>>> Starting kernel ...
>>>>>>
>>>>>> [    0.000000] Booting Linux on physical CPU 0x0
>>>>>> [    0.000000] Linux version 5.13.0-rc1-00082-g9dbbd5cb6240-dirty (nxp11987@lmecxl0573.lme1
>>>>>> [    0.000000] CPU: ARMv7-M [410fc241] revision 1 (ARMv7M), cr=00000000
>>>>>> [    0.000000] CPU: unknown data cache, unknown instruction cache
>>>>>> [    0.000000] OF: fdt: Machine model: STMicroelectronics STM32F429i-DISCO board
>>>>>> [    0.000000] Zone ranges:
>>>>>> [    0.000000]   Normal   [mem 0x0000000090000000-0x00000000907fffff]
>>>>>> [    0.000000] Movable zone start for each node
>>>>>> [    0.000000] Early memory node ranges
>>>>>>
>>>>>> [...]
>>>>>>
>>>>>> [    2.637564] printk: console [ttySTM0] enabled
>>>>>> [    2.747984] panel-ilitek-ili9341 spi0.1: get optional vcc failed
>>>>>> [    2.758986] spi_stm32 40015000.spi: driver initialized
>>>>>> [    2.795733] i2c /dev entries driver
>>>>>> [    2.849955] stmpe-i2c 0-0041: stmpe811 detected, chip id: 0x811
>>>>>> [    2.922030] stmpe-ts stmpe-ts: DMA mask not set
>>>>>> [    2.965729] input: stmpe-ts as /devices/platform/soc/40005c00.i2c/i2c-0/0-0041/stmpe-ts0
>>>>>> [    2.991570] stm32f4-i2c 40005c00.i2c: STM32F4 I2C driver registered
>>>>>> [    3.058262] [drm] Initialized stm 1.0.0 20170330 for 40016800.display-controller on min0
>>>>>> [    3.665951] panel-ilitek-ili9341 spi0.1: initialized display rgb interface
>>>>>> [    3.765208] Console: switching to colour frame buffer device 30x40
>>>>>> [    4.014269] stm32-display 40016800.display-controller: [drm] fb0: stmdrmfb frame buffere
>>>>>> [    4.212737] Freeing unused kernel memory: 324K
>>>>>> [    4.287300] This architecture does not have kernel memory protection.
>>>>>> [    4.401202] Run /linuxrc as init process
>>>>>> [    4.478622]   with arguments:
>>>>>> [    4.555069]     /linuxrc
>>>>>> [    4.595406]   with environment:
>>>>>> [    4.672213]     HOME=/
>>>>>> [    4.712511]     TERM=linux
>>>>>> [  206.785289] random: crng init done
>>>>>
>>>>> I guess you didn't add the rootfs to uImage I sent you.
>>>>
>>>> I do use your rootfs
>>>>
>>>>> Could you post all the logs from u-boot startup to kernel log end.
>>>>
>>>>
>>>> U-Boot 2021.07-rc2 (May 28 2021 - 17:05:35 +0200)
>>>>
>>>> DRAM:  8 MiB
>>>> Flash: 2 MiB
>>>> Loading Environment from Flash... OK
>>>> In:    serial@40011000
>>>> Out:   serial@40011000
>>>> Err:   serial@40011000
>>>> Hit any key to stop autoboot:  0
>>>> U-Boot >    setenv bootargs 'console=tty0 console=ttySTM0,115200 root=/dev/ram rdinit=/lin'
>>>
>>> It seems bootargs are broken here.
>>> should be setenv bootargs 'console=tty0 console=ttySTM0,115200
>>> root=/dev/ram rdinit=/linuxrc loglevel=8 fbcon=rotate:2'
>>
>> It's just a copy/paste issue from my minicom window to my mailer,
>> but the bootargs is correct ;-)
>>
>> See a correct U-boot/kernel log in attached.
> 
> Yes, your log is ok.
> I tried to follow your way(dtb + uImage) to figure out
> why your kernel was hanging there, but no luck.
> 
> You can find my log from [1] .
> (since my uImage is bigger than yours, i change the
> loadaddr to 0x90300000, 0x90306000)
> 
> but there are some points we can check:
> -  kernel config, you can find my config in [2],
>     could you share yours to me as well, i can based on
>     your configs to test.

Please find my .config attached

> -  uImage size (yours 1593664 bytes is quite smaller than mine, 2072864 bytes
>     the difference based on kernel config and rootfs size)
> -  cross tool chain (upload my toolchain to google drive [3])
> -  could you add initcall_debug to your bootargs, to see more log
>     at kernel startup

I also tried with your toolchain but still the same issue, see the log attached (with initcall_debug in bootargs).

Then i used an another rootfs (attached rootfs_mcu.cpio file) but unfortunately, during the 
rootfs init, some memory allocation are done and failed due to low RAM available on this board. 

The issue seems linked to the rootfs...but i got no clue on what is going wrong with your rootfs ?


Thanks
Patrice



> 
> [1] kernel log based on dtb + uImage
> https://drive.google.com/file/d/1wnA5b3B_6MIb4PWZXn-3DlBbxpi41uSA/view?usp=sharing
> 
> [2] kernel config
> https://drive.google.com/file/d/1oOJt3NRYor3-Uzjpzrujv3uvWguxYQQp/view?usp=sharing
> 
> [3] arm-none-eabi- toolchain
> https://drive.google.com/file/d/1Aq0sF2Gi4y4qaDPnM2S0xCOowFSLZYJm/view?usp=sharing
> 
> Best Regards
> Dillon
> 
>>
>>
>>>
>>>> U-Boot >
>>>> U-Boot >
>>>> U-Boot > setenv loadaddr 0x90400000
>>>> U-Boot > loady
>>>> ## Ready for binary (ymodem) download to 0x90400000 at 115200 bps...
>>>> CxyzModem - CRC mode, 156(SOH)/0(STX)/0(CAN) packets, 7 retries
>>>> ## Total Size      = 0x00004cad = 19629 Bytes
>>>> U-Boot > setenv loadaddr 0x90406000
>>>> U-Boot > loady
>>>> ## Ready for binary (ymodem) download to 0x90406000 at 115200 bps...
>>>> C- CRC mode, 12453(SOH)/0(STX)/0(CAN) packets, 4 retries
>>>> ## Total Size      = 0x00185140 = 1593664 Bytes
>>>> U-Boot > bootm 0x90406000 - 0x90400000
>>>> ## Booting kernel from Legacy Image at 90406000 ...
>>>>    Image Name:   Linux-5.13.0-rc1-00082-g9dbbd5cb
>>>>    Image Type:   ARM Linux Kernel Image (uncompressed)
>>>>    Data Size:    1593600 Bytes = 1.5 MiB
>>>>    Load Address: 90008000
>>>>    Entry Point:  90008000
>>>>    Verifying Checksum ... OK
>>>> ## Flattened Device Tree blob at 90400000
>>>>    Booting using the fdt blob at 0x90400000
>>>>    Loading Kernel Image
>>>>    Loading Device Tree to 905b9000, end 905c0cac ... OK
>>>>
>>>> Starting kernel ...
>>>>
>>>> [    0.000000] Booting Linux on physical CPU 0x0
>>>> [    0.000000] Linux version 5.13.0-rc1-00082-g9dbbd5cb6240-dirty (nxp11987@lmecxl0573.lme1
>>>> [    0.000000] CPU: ARMv7-M [410fc241] revision 1 (ARMv7M), cr=00000000
>>>> [    0.000000] CPU: unknown data cache, unknown instruction cache
>>>> [    0.000000] OF: fdt: Machine model: STMicroelectronics STM32F429i-DISCO board
>>>> [    0.000000] Zone ranges:
>>>> [    0.000000]   Normal   [mem 0x0000000090000000-0x00000000907fffff]
>>>> [    0.000000] Movable zone start for each node
>>>> [    0.000000] Early memory node ranges
>>>> [    0.000000]   node   0: [mem 0x0000000090000000-0x00000000907fffff]
>>>> [    0.000000] Initmem setup node 0 [mem 0x0000000090000000-0x00000000907fffff]
>>>> [    0.000000] On node 0 totalpages: 2048
>>>> [    0.000000]   Normal zone: 16 pages used for memmap
>>>> [    0.000000]   Normal zone: 0 pages reserved
>>>> [    0.000000]   Normal zone: 2048 pages, LIFO batch:0
>>>> [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
>>>> [    0.000000] pcpu-alloc: [0] 0
>>>> [    0.000000] Built 1 zonelists, mobility grouping off.  Total pages: 2032
>>>> [    0.000000] Kernel command line: console=tty0 console=ttySTM0,115200 root=/dev/ram rdin2
>>>
>>> ditto
>>
>> same explanation as above, the command line displayed is truncated, but it is the one expected.
>>
>>
>>>
>>>> [    0.000000] Dentry cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
>>>> [    0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
>>>> [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
>>>> [    0.000000] Memory: 5264K/8192K available (1372K kernel code, 302K rwdata, 516K rodata,)
>>>> [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>>>> [    0.000000] rcu: Preemptible hierarchical RCU implementation.
>>>> [    0.000000] rcu:     RCU event tracing is enabled.
>>>> [    0.000000]  Trampoline variant of Tasks RCU enabled.
>>>> [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
>>>> [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
>>>> [    0.000000] /soc/interrupt-controller@40013c00: bank0
>>>> [    0.000000] random: get_random_bytes called from start_kernel+0x203/0x370 with crng_ini0
>>>> [    0.000000] clocksource: arm_system_timer: mask: 0xffffff max_cycles: 0xffffff, max_idls
>>>> [    0.000000] ARM System timer initialized as clocksource
>>>> [    0.000026] sched_clock: 32 bits at 90MHz, resolution 11ns, wraps every 23860929530ns
>>>> [    0.000665] timer@40000c00: STM32 sched_clock registered
>>>> [    0.001275] Switching to timer-based delay loop, resolution 11ns
>>>> [    0.001712] timer@40000c00: STM32 delay timer registered
>>>> [    0.002253] clocksource: timer@40000c00: mask: 0xffffffff max_cycles: 0xffffffff, max_is
>>>> [    0.003076] /soc/timer@40000c00: STM32 clockevent driver initialized (32 bits)
>>>> [    0.014135] Console: colour dummy device 80x30
>>>> [    0.062375] printk: console [tty0] enabled
>>>> [    0.063843] Calibrating delay loop (skipped), value calculated using timer frequency.. )
>>>> [    0.066453] pid_max: default: 4096 minimum: 301
>>>> [    0.071393] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
>>>> [    0.073734] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
>>>> [    0.104759] rcu: Hierarchical SRCU implementation.
>>>> [    0.111552] devtmpfs: initialized
>>>> [    0.339332] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:s
>>>> [    0.341835] pinctrl core: initialized pinctrl subsystem
>>>> [    0.658423] stm32f429-pinctrl soc:pin-controller: No package detected, use default one
>>>> [    0.680505] stm32f429-pinctrl soc:pin-controller: GPIOA bank added
>>>> [    0.689824] stm32f429-pinctrl soc:pin-controller: GPIOB bank added
>>>> [    0.699409] stm32f429-pinctrl soc:pin-controller: GPIOC bank added
>>>> [    0.708775] stm32f429-pinctrl soc:pin-controller: GPIOD bank added
>>>> [    0.718094] stm32f429-pinctrl soc:pin-controller: GPIOE bank added
>>>> [    0.727535] stm32f429-pinctrl soc:pin-controller: GPIOF bank added
>>>> [    0.736953] stm32f429-pinctrl soc:pin-controller: GPIOG bank added
>>>> [    0.746404] stm32f429-pinctrl soc:pin-controller: GPIOH bank added
>>>> [    0.756098] stm32f429-pinctrl soc:pin-controller: GPIOI bank added
>>>> [    0.765436] stm32f429-pinctrl soc:pin-controller: GPIOJ bank added
>>>> [    0.774870] stm32f429-pinctrl soc:pin-controller: GPIOK bank added
>>>> [    0.776730] stm32f429-pinctrl soc:pin-controller: Pinctrl STM32 initialized
>>>> [    0.997446] stm32-dma 40026000.dma-controller: STM32 DMA driver registered
>>>> [    1.029604] stm32-dma 40026400.dma-controller: STM32 DMA driver registered
>>>> [    1.043098] clocksource: Switched to clocksource timer@40000c00
>>>> [    1.358086] workingset: timestamp_bits=30 max_order=11 bucket_order=0
>>>> [    1.632751] io scheduler mq-deadline registered
>>>> [    1.634287] io scheduler kyber registered
>>>> [    1.650574] STM32 USART driver initialized
>>>> [    1.661272] 40011000.serial: ttySTM0 at MMIO 0x40011000 (irq = 34, base_baud = 5625000)t
>>>> [    2.603317] random: fast init done
>>>> [    2.637564] printk: console [ttySTM0] enabled
>>>> [    2.747984] panel-ilitek-ili9341 spi0.1: get optional vcc failed
>>>> [    2.758986] spi_stm32 40015000.spi: driver initialized
>>>> [    2.795733] i2c /dev entries driver
>>>> [    2.849955] stmpe-i2c 0-0041: stmpe811 detected, chip id: 0x811
>>>> [    2.922030] stmpe-ts stmpe-ts: DMA mask not set
>>>> [    2.965729] input: stmpe-ts as /devices/platform/soc/40005c00.i2c/i2c-0/0-0041/stmpe-ts0
>>>> [    2.991570] stm32f4-i2c 40005c00.i2c: STM32F4 I2C driver registered
>>>> [    3.058262] [drm] Initialized stm 1.0.0 20170330 for 40016800.display-controller on min0
>>>> [    3.665951] panel-ilitek-ili9341 spi0.1: initialized display rgb interface
>>>> [    3.765208] Console: switching to colour frame buffer device 30x40
>>>> [    4.014269] stm32-display 40016800.display-controller: [drm] fb0: stmdrmfb frame buffere
>>>> [    4.212737] Freeing unused kernel memory: 324K
>>>> [    4.287300] This architecture does not have kernel memory protection.
>>>> [    4.401202] Run /linuxrc as init process
>>>> [    4.478622]   with arguments:
>>>> [    4.555069]     /linuxrc
>>>> [    4.595406]   with environment:
>>>> [    4.672213]     HOME=/
>>>> [    4.712511]     TERM=linux
>>>> [  206.785289] random: crng init done
>>>>
>>>>
>>>>>
>>>>> If possible, you can try my suggestion.
>>>>> - tar -jxf stm32_rootfs.tar.bz2
>>>>> - add stm32_rootfs to your kernel config( enable initramfs)
>>>>
>>>> As explained above, that's what i did
>>>>
>>>>> - make O=YOUR_KERNEL_OUT zImage dtbs LOADADDR=0x90008000
>>>>
>>>>
>>>>
>>>>> - create itb file (combine dtb and kernel, initramfs) by mkimage
>>>>>   ./mkimage -f stm32.its stm32.itb
>>>>
>>>> I didn't use .itb file, but directly uImage loaded @0x90406000 and stm32f429-disco.dtb loaded @0x90400000
>>>
>>> It's fine with manual load dtb and uImage.
>>>
>>>>
>>>> How do you generate .its file ?
>>>
>>> I refer to u-boot doc , U-BOOT-SOURCE/doc/uImage.FIT/kernel.its
>>> you can just change the PATH('data = ' filed) of my stm32.its.
>>> you can correct bootargs in u-boot, try again
>>>
>>> good luck.
>>>
>>> Thanks
>>>
>>> Best Regards
>>> Dillon
>>>
>>>>
>>>>
>>>>>   (before above command, make sure you correct stm32.its adapt to your env)
>>>>>
>>>>> This process will make u-boot to load the kernel more simple.
>>>>>
>>>>> Thanks.
>>>>>
>>>>> Best Regards.
>>>>> Dillon
>>>>>
>>>>>
>>>>>>
>>>>>>
>>>>>> I can't test your I2C patch.
>>>>>>
>>>>>> Patrice
>>>>>>
>>>>>>
>>>>>>> -- setup ts_calibrate running env on stm32f429-disco
>>>>>>> / # export TSLIB_CONFFILE=/etc/ts.conf
>>>>>>> / # export TSLIB_TSDEVICE=/dev/input/event0
>>>>>>> / # export TSLIB_CONSOLEDEVICE=none
>>>>>>> / # export TSLIB_FBDEVICE=/dev/fb0
>>>>>>>
>>>>>>> -- clear screen
>>>>>>> / # ./fb
>>>>>>>
>>>>>>> -- run ts_calibrate
>>>>>>> / # ts_calibrate
>>>>>>> (you can calibrate touchscreen now, and get below errors)
>>>>>>>
>>>>>>> [  113.942087] stmpe-i2c0-0041: failed to read regs 0x52: -110
>>>>>>> [  114.063598] stmpe-i2c 0-0041: failed to read reg 0x4b: -16
>>>>>>> [  114.185629] stmpe-i2c 0-0041: failed to read reg 0x40: -16
>>>>>>> [  114.307257] stmpe-i2c 0-0041: failed to write reg 0xb: -16
>>>>>>>
>>>>>>> ...
>>>>>>> with i2c patch applied, you will find below logs:
>>>>>>>
>>>>>>> RAW---------------------> 3164 908 183 118.110884
>>>>>>> TS_READ_RAW----> x = 3164, y =908, pressure = 183
>>>>>>> RAW---------------------> 3166 922 126 118.138946
>>>>>>> TS_READ_RAW----> x = 3166, y = 922, pressure = 126
>>>>>>> ....
>>>>>>>
>>>>>>> files link:
>>>>>>> https://drive.google.com/drive/folders/1qNbjChcB6UGtKzne2F5x9_WG_sZFyo3o?usp=sharing
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Dillon Min (4):
>>>>>>>   drm/panel: Add ilitek ili9341 panel driver
>>>>>>>   i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
>>>>>>>   clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate
>>>>>>>   clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after
>>>>>>>     kernel startup
>>>>>>>
>>>>>>>  drivers/clk/clk-stm32f4.c                    |   10 +-
>>>>>>>  drivers/gpu/drm/panel/Kconfig                |   12 +
>>>>>>>  drivers/gpu/drm/panel/Makefile               |    1 +
>>>>>>>  drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1285 ++++++++++++++++++++++++++
>>>>>>>  drivers/i2c/busses/i2c-stm32f4.c             |   12 +-
>>>>>>>  5 files changed, 1310 insertions(+), 10 deletions(-)
>>>>>>>  create mode 100755 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
>>>>>>>

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 52485 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 5.13.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="arm-none-eabi-gcc (GNU Arm Embedded Toolchain 10-2020-q4-major) 10.2.1 20201103 (release)"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=100201
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23501
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23501
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_WATCH_QUEUE is not set
# CONFIG_USELIB is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# end of IRQ subsystem

CONFIG_GENERIC_CLOCKEVENTS=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="/local/home/nxp11987/Downloads/STM32F429-disco_binaires_issue_clk_i2c/stm32_rootfs.tar.bz2"
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
CONFIG_INITRAMFS_COMPRESSION_GZIP=y
# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters

# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
# CONFIG_PROFILING is not set
# end of General setup

CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PHYS_OFFSET=0x90000000
CONFIG_GENERIC_BUG=y
CONFIG_PGTABLE_LEVELS=2

#
# System Type
#
# CONFIG_MMU is not set
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARM_SINGLE_ARMV7M=y
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_MXC is not set
CONFIG_ARCH_STM32=y
CONFIG_MACH_STM32F429=y
# CONFIG_MACH_STM32F469 is not set
# CONFIG_MACH_STM32F746 is not set
# CONFIG_MACH_STM32F769 is not set
# CONFIG_MACH_STM32H743 is not set
# CONFIG_ARCH_LPC18XX is not set
# CONFIG_ARCH_MPS2 is not set

#
# Processor Type
#
CONFIG_CPU_V7M=y
CONFIG_CPU_THUMBONLY=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_32v7M=y
CONFIG_CPU_ABRT_NOMMU=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_NOP=y
CONFIG_CPU_CACHE_V7M=y
CONFIG_CPU_V7M_NUM_IRQ=240

#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_SET_MEM_PARAM=y
CONFIG_DRAM_BASE=0x90000000
CONFIG_DRAM_SIZE=0x00800000
# CONFIG_REMAP_VECTORS_TO_RAM is not set
# CONFIG_ARM_MPU is not set
# end of System Type

#
# Bus support
#
# end of Bus support

#
# Kernel Features
#
CONFIG_PAGE_OFFSET=0x90000000
CONFIG_ARCH_NR_GPIO=0
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_THUMB2_KERNEL=y
CONFIG_AEABI=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# end of Kernel Features

#
# Boot options
#
CONFIG_USE_OF=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
# CONFIG_ARM_APPENDED_DTB is not set
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y
# end of Boot options

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPU Power Management

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
# end of Floating point emulation

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_APM_EMULATION is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
# end of Power management options

#
# Firmware Drivers
#
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_ARM_CRYPTO is not set
CONFIG_AS_VFP_VMRS_FPINST=y

#
# General architecture-dependent options
#
CONFIG_SET_FS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_HAVE_ARCH_PFN_VALID=y

#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
# CONFIG_BINFMT_FLAT_OLD is not set
# CONFIG_BINFMT_ZFLAT is not set
CONFIG_BINFMT_SHARED_FLAT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
# end of Executable file formats

#
# Memory Management options
#
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PAGE_REPORTING is not set
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_PERCPU_STATS is not set

#
# GUP_TEST needs to have DEBUG_FS enabled
#
# end of Memory Management options

# CONFIG_NET is not set
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_ARM_AMBA=y
# CONFIG_PCCARD is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
# CONFIG_FW_LOADER is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_MOXTET is not set
# CONFIG_SIMPLE_PM_BUS is not set
# CONFIG_VEXPRESS_CONFIG is not set
# CONFIG_MHI_BUS is not set
# end of Bus devices

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set

#
# NVME Support
#
# CONFIG_NVME_FC is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# end of SCSI device support

# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_ILITEK is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MSG2638 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
CONFIG_TOUCHSCREEN_STMPE=y
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
# CONFIG_TOUCHSCREEN_ZINITIX is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_SPRD is not set
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_N_HDLC is not set
# CONFIG_NULL_TTY is not set
# CONFIG_HVC_DCC is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
# CONFIG_HW_RANDOM is not set
CONFIG_DEVMEM=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# end of Character devices

# CONFIG_RANDOM_TRUST_BOOTLOADER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_NOMADIK is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_STM32F4=y
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
# end of I2C Hardware Bus support

CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_SLAVE_TESTUNIT is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_ALTERA_CORE is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_CADENCE_QUADSPI is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PL022 is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
CONFIG_SPI_STM32=y
# CONFIG_SPI_STM32_QSPI is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_STMFX is not set
# CONFIG_PINCTRL_OCELOT is not set
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_STM32=y
CONFIG_PINCTRL_STM32F429=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_LOGICVC is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_PL061 is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_ZEVIO is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_HTC_EGPIO is not set
CONFIG_GPIO_STMPE=y
# end of MFD GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# end of Virtual GPIO drivers

# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# CONFIG_STMPE_SPI is not set
# end of STMicroelectronics STMPE Interface Drivers

CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD70528 is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STM32_LPTIMER is not set
CONFIG_MFD_STM32_TIMERS=y
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_DRM=y
CONFIG_DRM_MIPI_DBI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set
# CONFIG_DRM_KOMEDA is not set
# end of ARM devices

# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_LVDS is not set
# CONFIG_DRM_TILCDC is not set
# CONFIG_DRM_FSL_DCU is not set
CONFIG_DRM_STM=y
# CONFIG_DRM_STM_DSI is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_ABT_Y030XX067A is not set
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
CONFIG_DRM_PANEL_ILITEK_ILI9341=y
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_LG_LB035Q02 is not set
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NWL_MIPI_DSI is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# end of Display Interface Bridges

# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_PL111 is not set
# CONFIG_DRM_TIDSS is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_ARMCLCD is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
# CONFIG_HID is not set

#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_AMBA_PL08X is not set
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_FSL_QDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_NBPFAXI_DMA is not set
# CONFIG_PL330_DMA is not set
CONFIG_STM32_DMA=y
CONFIG_STM32_DMAMUX=y
CONFIG_STM32_MDMA=y
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_SF_PDMA is not set

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_COMMON_CLK_VC5 is not set
CONFIG_COMMON_CLK_STM32F=y
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_STM32=y
CONFIG_ARMV7M_SYSTICK=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# CONFIG_SOC_BRCMSTB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_RCPM is not set
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_NVIC=y
# CONFIG_AL_FIC is not set
CONFIG_STM32_EXTI=y
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_INTEL_GW is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_TI_SYSCON is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_CADENCE_TORRENT is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_OCELOT_SERDES is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
# CONFIG_RAS is not set

#
# Android
#
# CONFIG_ANDROID is not set
# end of Android

# CONFIG_DAX is not set
# CONFIG_NVMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_NETFS_SUPPORT is not set
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
# CONFIG_CRYPTO_MANAGER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_ECHAINIV is not set

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CFB is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_XXHASH is not set
# CONFIG_CRYPTO_BLAKE2B is not set
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_JITTERENTROPY is not set

#
# Crypto library routines
#
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_STM32_CRC is not set
# CONFIG_CRYPTO_DEV_STM32_HASH is not set
# CONFIG_CRYPTO_DEV_STM32_CRYP is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set

#
# Certificates for signature checking
#
# end of Certificates for signature checking

#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_DMA_NONCOHERENT_MMAP=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_GENERIC_ATOMIC64=y
# CONFIG_IRQ_POLL is not set
CONFIG_LIBFDT=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_ARCH_NO_SG_CHAIN=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines

CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_BTF is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
# CONFIG_DEBUG_FS is not set
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_NOMMU_REGIONS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
# CONFIG_STACKTRACE is not set
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
# CONFIG_SAMPLES is not set

#
# arm Debugging
#
CONFIG_UNWINDER_ARM=y
CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_CORESIGHT is not set
# end of arm Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_SORT is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking

[-- Attachment #3: u_boot_uimage_Toolchain_10-2020-q4-major_initcall_debug.log.txt --]
[-- Type: text/plain, Size: 28820 bytes --]


U-Boot 2021.07-rc2 (May 28 2021 - 17:05:35 +0200)                                                                              
                                                                                                                               
DRAM:  8 MiB                                                                                                                   
Flash: 2 MiB                                                                                                                   
Loading Environment from Flash... OK                                                                                           
In:    serial@40011000                                                                                                         
Out:   serial@40011000                                                                                                         
Err:   serial@40011000                                                                                                         
Hit any key to stop autoboot:  0                                                                                               
U-Boot >  setenv bootargs 'console=tty0 console=ttySTM0,115200 root=/dev/ram rdinit=/linuxrc loglevel=8 fbcon=rotate:2 initcall_debug'
U-Boot > setenv loadaddr 0x90400000                                                                                            
U-Boot > loady                                                                                                                 
## Ready for binary (ymodem) download to 0x90400000 at 115200 bps...                                                           
C CRC mode, 156(SOH)/0(STX)/0(CAN) packets, 7 retries                                                                          
## Total Size      = 0x00004cad = 19629 Bytes                                                                                  
U-Boot > setenv loadaddr 0x90406000                                                                                            
U-Boot > loady
## Ready for binary (ymodem) download to 0x90406000 at 115200 bps...                                                           
CxyzModem - CRC mode, 12473(SOH)/0(STX)/0(CAN) packets, 5 retries
## Total Size      = 0x00185b68 = 1596264 Bytes
U-Boot > bootm 0x90406000 - 0x90400000
## Booting kernel from Legacy Image at 90406000 ...
   Image Name:   Linux-5.13.0-rc1-00082-g8743c6c7
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1596200 Bytes = 1.5 MiB
   Load Address: 90008000
   Entry Point:  90008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 90400000
   Booting using the fdt blob at 0x90400000
   Loading Kernel Image
   Loading Device Tree to 905b9000, end 905c0cac ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.13.0-rc1-00082-g8743c6c7048c (nxp11987@lmecxl0573.lme.st.com) (arm-none-eabi-gcc (GNU Arm Embedded Toolchain 10-2020-q4-major) 10.2.1 20201103 (r1
[    0.000000] CPU: ARMv7-M [410fc241] revision 1 (ARMv7M), cr=00000000
[    0.000000] CPU: unknown data cache, unknown instruction cache
[    0.000000] OF: fdt: Machine model: STMicroelectronics STM32F429i-DISCO board
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000090000000-0x00000000907fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000090000000-0x00000000907fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000090000000-0x00000000907fffff]
[    0.000000] On node 0 totalpages: 2048
[    0.000000]   Normal zone: 16 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 2048 pages, LIFO batch:0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping off.  Total pages: 2032
[    0.000000] Kernel command line: console=tty0 console=ttySTM0,115200 root=/dev/ram rdinit=/linuxrc loglevel=8 fbcon=rotate:2 initcall_debug
[    0.000000] Dentry cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 5256K/8192K available (1379K kernel code, 302K rwdata, 520K rodata, 324K init, 118K bss, 2936K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] /soc/interrupt-controller@40013c00: bank0
[    0.000000] random: get_random_bytes called from start_kernel+0x1ed/0x364 with crng_init=0
[    0.000000] clocksource: arm_system_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 331816030 ns
[    0.000000] ARM System timer initialized as clocksource
[    0.000025] sched_clock: 32 bits at 90MHz, resolution 11ns, wraps every 23860929530ns
[    0.000678] timer@40000c00: STM32 sched_clock registered
[    0.001277] Switching to timer-based delay loop, resolution 11ns
[    0.001720] timer@40000c00: STM32 delay timer registered
[    0.002256] clocksource: timer@40000c00: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 21236227187 ns
[    0.003066] /soc/timer@40000c00: STM32 clockevent driver initialized (32 bits)
[    0.014751] Console: colour dummy device 80x30
[    0.062500] printk: console [tty0] enabled
[    0.063953] Calibrating delay loop (skipped), value calculated using timer frequency.. 180.00 BogoMIPS (lpj=900000)
[    0.066518] pid_max: default: 4096 minimum: 301
[    0.071470] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.073788] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.102609] calling  cpu_suspend_alloc_sp+0x1/0x54 @ 1
[    0.104556] initcall cpu_suspend_alloc_sp+0x1/0x54 returned 0 after 0 usecs
[    0.106605] calling  spawn_ksoftirqd+0x1/0x2c @ 1
[    0.109997] initcall spawn_ksoftirqd+0x1/0x2c returned 0 after 0 usecs
[    0.112090] calling  srcu_bootup_announce+0x1/0x2c @ 1
[    0.113677] rcu: Hierarchical SRCU implementation.
[    0.115058] initcall srcu_bootup_announce+0x1/0x2c returned 0 after 9765 usecs
[    0.117216] calling  rcu_sysrq_init+0x1/0x18 @ 1
[    0.118713] initcall rcu_sysrq_init+0x1/0x18 returned 0 after 0 usecs
[    0.120535] calling  check_cpu_stall_init+0x1/0x18 @ 1
[    0.122126] initcall check_cpu_stall_init+0x1/0x18 returned 0 after 0 usecs
[    0.124037] calling  rcu_spawn_gp_kthread+0x1/0x108 @ 1
[    0.127094] initcall rcu_spawn_gp_kthread+0x1/0x108 returned 0 after 0 usecs
[    0.129028] calling  rcu_spawn_core_kthreads+0x1/0x58 @ 1
[    0.130667] initcall rcu_spawn_core_kthreads+0x1/0x58 returned 0 after 0 usecs
[    0.132829] calling  initialize_ptr_random+0x1/0x3c @ 1
[    0.134561] initcall initialize_ptr_random+0x1/0x3c returned 0 after 0 usecs
[    0.141029] devtmpfs: initialized
[    0.361184] calling  ptrace_break_init+0x1/0x24 @ 1
[    0.362919] initcall ptrace_break_init+0x1/0x24 returned 0 after 0 usecs
[    0.364971] calling  wq_sysfs_init+0x1/0x24 @ 1
[    0.369422] initcall wq_sysfs_init+0x1/0x24 returned 0 after 9765 usecs
[    0.371536] calling  ksysfs_init+0x1/0x64 @ 1
[    0.373956] initcall ksysfs_init+0x1/0x64 returned 0 after 0 usecs
[    0.376004] calling  pm_init+0x1/0x44 @ 1
[    0.380345] initcall pm_init+0x1/0x44 returned 0 after 0 usecs
[    0.382021] calling  rcu_set_runtime_mode+0x1/0x14 @ 1
[    0.383604] initcall rcu_set_runtime_mode+0x1/0x14 returned 0 after 0 usecs
[    0.385508] calling  dma_init_reserved_memory+0x1/0x38 @ 1
[    0.387164] initcall dma_init_reserved_memory+0x1/0x38 returned -12 after 0 usecs
[    0.389565] calling  init_jiffies_clocksource+0x1/0x10 @ 1
[    0.391266] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.393671] initcall init_jiffies_clocksource+0x1/0x10 returned 0 after 0 usecs
[    0.395874] calling  cpu_pm_init+0x1/0x10 @ 1
[    0.397534] initcall cpu_pm_init+0x1/0x10 returned 0 after 0 usecs
[    0.399710] calling  init_script_binfmt+0x1/0x14 @ 1
[    0.401471] initcall init_script_binfmt+0x1/0x14 returned 0 after 0 usecs
[    0.403553] calling  init_elf_fdpic_binfmt+0x1/0x14 @ 1
[    0.405360] initcall init_elf_fdpic_binfmt+0x1/0x14 returned 0 after 0 usecs
[    0.407486] calling  init_flat_binfmt+0x1/0x14 @ 1
[    0.409410] initcall init_flat_binfmt+0x1/0x14 returned 0 after 0 usecs
[    0.411461] calling  prandom_init_early+0x1/0x98 @ 1
[    0.413274] initcall prandom_init_early+0x1/0x98 returned 0 after 0 usecs
[    0.415405] calling  pinctrl_init+0x1/0x10 @ 1
[    0.417121] pinctrl core: initialized pinctrl subsystem
[    0.418376] initcall pinctrl_init+0x1/0x10 returned 0 after 0 usecs
[    0.420619] calling  gpiolib_dev_init+0x1/0xc0 @ 1
[    0.424495] initcall gpiolib_dev_init+0x1/0xc0 returned 0 after 0 usecs
[    0.429523] calling  irq_sysfs_init+0x1/0x60 @ 1
[    0.462695] initcall irq_sysfs_init+0x1/0x60 returned 0 after 29296 usecs
[    0.464558] calling  bdi_class_init+0x1/0x2c @ 1
[    0.466618] initcall bdi_class_init+0x1/0x2c returned 0 after 0 usecs
[    0.468496] calling  mm_sysfs_init+0x1/0x28 @ 1
[    0.470374] initcall mm_sysfs_init+0x1/0x28 returned 0 after 0 usecs
[    0.472235] calling  init_per_zone_wmark_min+0x1/0x4c @ 1
[    0.474034] initcall init_per_zone_wmark_min+0x1/0x4c returned 0 after 0 usecs
[    0.476321] calling  backlight_class_init+0x1/0x6c @ 1
[    0.478705] initcall backlight_class_init+0x1/0x6c returned 0 after 0 usecs
[    0.481081] calling  amba_init+0x1/0xc @ 1
[    0.483910] initcall amba_init+0x1/0xc returned 0 after 0 usecs
[    0.485905] calling  tty_class_init+0x1/0x2c @ 1
[    0.487881] initcall tty_class_init+0x1/0x2c returned 0 after 0 usecs
[    0.489669] calling  vtconsole_class_init+0x1/0xa4 @ 1
[    0.494278] initcall vtconsole_class_init+0x1/0xa4 returned 0 after 0 usecs
[    0.496174] calling  devlink_class_init+0x1/0x30 @ 1
[    0.498256] initcall devlink_class_init+0x1/0x30 returned 0 after 0 usecs
[    0.500133] calling  software_node_init+0x1/0x2c @ 1
[    0.502069] initcall software_node_init+0x1/0x2c returned 0 after 0 usecs
[    0.503972] calling  wakeup_sources_debugfs_init+0x1/0x4 @ 1
[    0.505678] initcall wakeup_sources_debugfs_init+0x1/0x4 returned 0 after 0 usecs
[    0.507908] calling  wakeup_sources_sysfs_init+0x1/0x24 @ 1
[    0.510126] initcall wakeup_sources_sysfs_init+0x1/0x24 returned 0 after 0 usecs
[    0.512538] calling  regmap_initcall+0x1/0x4 @ 1
[    0.514055] initcall regmap_initcall+0x1/0x4 returned 0 after 0 usecs
[    0.515898] calling  syscon_init+0x1/0xc @ 1
[    0.518543] initcall syscon_init+0x1/0xc returned 0 after 0 usecs
[    0.520329] calling  spi_init+0x1/0x58 @ 1
[    0.523653] initcall spi_init+0x1/0x58 returned 0 after 9765 usecs
[    0.525459] calling  i2c_init+0x1/0x80 @ 1
[    0.529142] initcall i2c_init+0x1/0x80 returned 0 after 0 usecs
[    0.533830] calling  customize_machine+0x1/0x14 @ 1
[    0.535564] initcall customize_machine+0x1/0x14 returned 0 after 0 usecs
[    0.537622] calling  exceptions_init+0x1/0x58 @ 1
[    0.539348] initcall exceptions_init+0x1/0x58 returned 0 after 0 usecs
[    0.541398] calling  kcmp_cookies_init+0x1/0x2c @ 1
[    0.543453] initcall kcmp_cookies_init+0x1/0x2c returned 0 after 0 usecs
[    0.545333] calling  stm32_exti_arch_init+0x1/0xc @ 1
[    0.548038] initcall stm32_exti_arch_init+0x1/0xc returned 0 after 0 usecs
[    0.550180] calling  stm32f429_pinctrl_init+0x1/0xc @ 1
[    0.553145] initcall stm32f429_pinctrl_init+0x1/0xc returned 0 after 9765 usecs
[    0.555566] calling  dma_bus_init+0x1/0x68 @ 1
[    0.557951] initcall dma_bus_init+0x1/0x68 returned 0 after 0 usecs
[    0.560028] calling  dma_channel_table_init+0x1/0x8c @ 1
[    0.562867] initcall dma_channel_table_init+0x1/0x8c returned 0 after 0 usecs
[    0.565292] calling  stm32_dmamux_init+0x1/0xc @ 1
[    0.567695] initcall stm32_dmamux_init+0x1/0xc returned 0 after 0 usecs
[    0.569502] calling  of_platform_default_populate_init+0x1/0x6a @ 1
[    0.832095] stm32f429-pinctrl soc:pin-controller: No package detected, use default one
[    0.853970] stm32f429-pinctrl soc:pin-controller: GPIOA bank added
[    0.863359] stm32f429-pinctrl soc:pin-controller: GPIOB bank added
[    0.873017] stm32f429-pinctrl soc:pin-controller: GPIOC bank added
[    0.882444] stm32f429-pinctrl soc:pin-controller: GPIOD bank added
[    0.891830] stm32f429-pinctrl soc:pin-controller: GPIOE bank added
[    0.901352] stm32f429-pinctrl soc:pin-controller: GPIOF bank added
[    0.910826] stm32f429-pinctrl soc:pin-controller: GPIOG bank added
[    0.920351] stm32f429-pinctrl soc:pin-controller: GPIOH bank added
[    0.930113] stm32f429-pinctrl soc:pin-controller: GPIOI bank added
[    0.939520] stm32f429-pinctrl soc:pin-controller: GPIOJ bank added
[    0.949025] stm32f429-pinctrl soc:pin-controller: GPIOK bank added
[    0.950870] stm32f429-pinctrl soc:pin-controller: Pinctrl STM32 initialized
[    0.981687] initcall of_platform_default_populate_init+0x1/0x6a returned 0 after 390625 usecs
[    0.987050] calling  topology_init+0x1/0x18 @ 1
[    0.991330] initcall topology_init+0x1/0x18 returned 0 after 0 usecs
[    0.993322] calling  uid_cache_init+0x1/0x80 @ 1
[    0.995161] initcall uid_cache_init+0x1/0x80 returned 0 after 0 usecs
[    0.997440] calling  param_sysfs_init+0x1/0x240 @ 1
[    1.134651] initcall param_sysfs_init+0x1/0x240 returned 0 after 126953 usecs
[    1.137500] calling  user_namespace_sysctl_init+0x1/0x28 @ 1
[    1.140638] initcall user_namespace_sysctl_init+0x1/0x28 returned 0 after 0 usecs
[    1.143123] calling  pm_sysrq_init+0x1/0x14 @ 1
[    1.146486] initcall pm_sysrq_init+0x1/0x14 returned 0 after 0 usecs
[    1.148849] calling  default_bdi_init+0x1/0x2c @ 1
[    1.154727] initcall default_bdi_init+0x1/0x2c returned 0 after 0 usecs
[    1.156641] calling  percpu_enable_async+0x1/0x10 @ 1
[    1.158817] initcall percpu_enable_async+0x1/0x10 returned 0 after 0 usecs
[    1.160776] calling  init_admin_reserve+0x1/0x24 @ 1
[    1.162455] initcall init_admin_reserve+0x1/0x24 returned 0 after 0 usecs
[    1.164458] calling  init_user_reserve+0x1/0x24 @ 1
[    1.166117] initcall init_user_reserve+0x1/0x24 returned 0 after 0 usecs
[    1.168293] calling  io_wq_init+0x1/0x30 @ 1
[    1.169932] initcall io_wq_init+0x1/0x30 returned 0 after 0 usecs
[    1.171885] calling  crc32c_mod_init+0x1/0xc @ 1
[    1.173734] initcall crc32c_mod_init+0x1/0xc returned 0 after 0 usecs
[    1.175781] calling  init_bio+0x1/0x54 @ 1
[    1.178833] initcall init_bio+0x1/0x54 returned 0 after 9765 usecs
[    1.180836] calling  blk_ioc_init+0x1/0x28 @ 1
[    1.182631] initcall blk_ioc_init+0x1/0x28 returned 0 after 0 usecs
[    1.184656] calling  blk_mq_init+0x1/0x74 @ 1
[    1.186376] initcall blk_mq_init+0x1/0x74 returned 0 after 0 usecs
[    1.188582] calling  genhd_device_init+0x1/0x50 @ 1
[    1.192787] initcall genhd_device_init+0x1/0x50 returned 0 after 0 usecs
[    1.194891] calling  stmpe_gpio_init+0x1/0xc @ 1
[    1.197606] initcall stmpe_gpio_init+0x1/0xc returned 0 after 0 usecs
[    1.200104] calling  fbmem_init+0x1/0x98 @ 1
[    1.204738] initcall fbmem_init+0x1/0x98 returned 0 after 0 usecs
[    1.206762] calling  stm32_dma_init+0x1/0xc @ 1
[    1.239296] stm32-dma 40026000.dma-controller: STM32 DMA driver registered
[    1.271543] stm32-dma 40026400.dma-controller: STM32 DMA driver registered
[    1.275498] initcall stm32_dma_init+0x1/0xc returned 0 after 58593 usecs
[    1.277640] calling  stm32_mdma_init+0x1/0xc @ 1
[    1.281442] initcall stm32_mdma_init+0x1/0xc returned 0 after 0 usecs
[    1.283217] calling  misc_init+0x1/0x84 @ 1
[    1.285415] initcall misc_init+0x1/0x84 returned 0 after 0 usecs
[    1.287149] calling  stmpe_init+0x1/0xc @ 1
[    1.289682] initcall stmpe_init+0x1/0xc returned 0 after 9765 usecs
[    1.291491] calling  dma_buf_init+0x1/0x34 @ 1
[    1.293919] initcall dma_buf_init+0x1/0x34 returned 0 after 0 usecs
[    1.295741] calling  input_init+0x1/0xac @ 1
[    1.298056] initcall input_init+0x1/0xac returned 0 after 0 usecs
[    1.302769] calling  iomem_init_inode+0x1/0x58 @ 1
[    1.305426] initcall iomem_init_inode+0x1/0x58 returned 0 after 0 usecs
[    1.307531] calling  clocksource_done_booting+0x1/0x30 @ 1
[    1.309292] clocksource: Switched to clocksource timer@40000c00
[    1.311169] initcall clocksource_done_booting+0x1/0x30 returned 0 after 1896 usecs
[    1.313414] calling  init_pipe_fs+0x1/0x30 @ 1
[    1.315789] initcall init_pipe_fs+0x1/0x30 returned 0 after 751 usecs
[    1.317755] calling  anon_inode_init+0x1/0x48 @ 1
[    1.320498] initcall anon_inode_init+0x1/0x48 returned 0 after 779 usecs
[    1.322556] calling  proc_nommu_init+0x1/0x24 @ 1
[    1.324351] initcall proc_nommu_init+0x1/0x24 returned 0 after 87 usecs
[    1.326405] calling  proc_cmdline_init+0x1/0x20 @ 1
[    1.328232] initcall proc_cmdline_init+0x1/0x20 returned 0 after 84 usecs
[    1.330503] calling  proc_consoles_init+0x1/0x24 @ 1
[    1.332353] initcall proc_consoles_init+0x1/0x24 returned 0 after 89 usecs
[    1.334458] calling  proc_cpuinfo_init+0x1/0x1c @ 1
[    1.336292] initcall proc_cpuinfo_init+0x1/0x1c returned 0 after 90 usecs
[    1.338381] calling  proc_devices_init+0x1/0x24 @ 1
[    1.340464] initcall proc_devices_init+0x1/0x24 returned 0 after 90 usecs
[    1.342554] calling  proc_interrupts_init+0x1/0x24 @ 1
[    1.344437] initcall proc_interrupts_init+0x1/0x24 returned 0 after 89 usecs
[    1.346572] calling  proc_loadavg_init+0x1/0x20 @ 1
[    1.348413] initcall proc_loadavg_init+0x1/0x20 returned 0 after 90 usecs
[    1.350759] calling  proc_meminfo_init+0x1/0x20 @ 1
[    1.352603] initcall proc_meminfo_init+0x1/0x20 returned 0 after 92 usecs
[    1.354700] calling  proc_stat_init+0x1/0x1c @ 1
[    1.356493] initcall proc_stat_init+0x1/0x1c returned 0 after 91 usecs
[    1.358542] calling  proc_uptime_init+0x1/0x20 @ 1
[    1.360616] initcall proc_uptime_init+0x1/0x20 returned 0 after 88 usecs
[    1.362695] calling  proc_version_init+0x1/0x20 @ 1
[    1.364547] initcall proc_version_init+0x1/0x20 returned 0 after 95 usecs
[    1.366650] calling  proc_softirqs_init+0x1/0x20 @ 1
[    1.368509] initcall proc_softirqs_init+0x1/0x20 returned 0 after 88 usecs
[    1.370877] calling  proc_kmsg_init+0x1/0x1c @ 1
[    1.372676] initcall proc_kmsg_init+0x1/0x1c returned 0 after 83 usecs
[    1.374740] calling  init_ramfs_fs+0x1/0xc @ 1
[    1.376450] initcall init_ramfs_fs+0x1/0xc returned 0 after 27 usecs
[    1.378477] calling  chr_dev_init+0x1/0x7c @ 1
[    1.617091] initcall chr_dev_init+0x1/0x7c returned 0 after 231364 usecs
[    1.618939] calling  populate_rootfs+0x1/0x38 @ 1
[    1.622201] initcall populate_rootfs+0x1/0x38 returned 0 after 93 usecs
[    1.626960] calling  proc_execdomains_init+0x1/0x20 @ 1
[    1.628890] initcall proc_execdomains_init+0x1/0x20 returned 0 after 91 usecs
[    1.688877] calling  register_warn_debugfs+0x1/0x4 @ 1
[    1.690962] initcall register_warn_debugfs+0x1/0x4 returned 0 after 5 usecs
[    1.693113] calling  ioresources_init+0x1/0x40 @ 1
[    1.695061] initcall ioresources_init+0x1/0x40 returned 0 after 170 usecs
[    1.697195] calling  irq_gc_init_ops+0x1/0x10 @ 1
[    1.698704] initcall irq_gc_init_ops+0x1/0x10 returned 0 after 12 usecs
[    1.700858] calling  irq_pm_init_ops+0x1/0x10 @ 1
[    1.702368] initcall irq_pm_init_ops+0x1/0x10 returned 0 after 12 usecs
[    1.704214] calling  timekeeping_init_ops+0x1/0x10 @ 1
[    1.705826] initcall timekeeping_init_ops+0x1/0x10 returned 0 after 12 usecs
[    1.707769] calling  init_clocksource_sysfs+0x1/0x20 @ 1
[    1.714319] initcall init_clocksource_sysfs+0x1/0x20 returned 0 after 4497 usecs
[    1.716528] calling  init_timer_list_procfs+0x1/0x30 @ 1
[    1.718262] initcall init_timer_list_procfs+0x1/0x30 returned 0 after 90 usecs
[    1.720756] calling  alarmtimer_init+0x1/0x40 @ 1
[    1.723479] initcall alarmtimer_init+0x1/0x40 returned 0 after 1160 usecs
[    1.725388] calling  init_posix_timers+0x1/0x28 @ 1
[    1.727220] initcall init_posix_timers+0x1/0x28 returned 0 after 256 usecs
[    1.729153] calling  clockevents_init_sysfs+0x1/0x44 @ 1
[    1.735627] initcall clockevents_init_sysfs+0x1/0x44 returned 0 after 4413 usecs
[    1.737845] calling  sched_clock_syscore_init+0x1/0x10 @ 1
[    1.749804] initcall sched_clock_syscore_init+0x1/0x10 returned 0 after 12 usecs
[    1.752026] calling  kallsyms_init+0x1/0x1c @ 1
[    1.753638] initcall kallsyms_init+0x1/0x1c returned 0 after 94 usecs
[    1.755501] calling  seccomp_sysctl_init+0x1/0x20 @ 1
[    1.757484] initcall seccomp_sysctl_init+0x1/0x20 returned 0 after 362 usecs
[    1.823512] calling  utsname_sysctl_init+0x1/0x10 @ 1
[    1.825643] initcall utsname_sysctl_init+0x1/0x10 returned 0 after 506 usecs
[    1.827615] calling  kswapd_init+0x1/0x10 @ 1
[    1.830777] initcall kswapd_init+0x1/0x10 returned 0 after 1630 usecs
[    1.832646] calling  workingset_init+0x1/0x68 @ 1
[    1.834223] workingset: timestamp_bits=30 max_order=11 bucket_order=0
[    1.835849] initcall workingset_init+0x1/0x68 returned 0 after 1589 usecs
[    1.837800] calling  slab_sysfs_init+0x1/0xac @ 1
[    2.099890] initcall slab_sysfs_init+0x1/0xac returned 0 after 253921 usecs
[    2.101930] calling  fcntl_init+0x1/0x28 @ 1
[    2.103785] initcall fcntl_init+0x1/0x28 returned 0 after 271 usecs
[    2.105723] calling  proc_filesystems_init+0x1/0x20 @ 1
[    2.107574] initcall proc_filesystems_init+0x1/0x20 returned 0 after 96 usecs
[    2.109977] calling  start_dirtytime_writeback+0x1/0x24 @ 1
[    2.111831] initcall start_dirtytime_writeback+0x1/0x24 returned 0 after 28 usecs
[    2.114200] calling  blkdev_init+0x1/0x10 @ 1
[    2.116326] initcall blkdev_init+0x1/0x10 returned 0 after 484 usecs
[    2.118317] calling  dio_init+0x1/0x28 @ 1
[    2.123085] initcall dio_init+0x1/0x28 returned 0 after 2806 usecs
[    2.125044] calling  io_uring_init+0x1/0x28 @ 1
[    2.126944] initcall io_uring_init+0x1/0x28 returned 0 after 229 usecs
[    2.128973] calling  crypto_algapi_init+0x1/0xc @ 1
[    2.131136] initcall crypto_algapi_init+0x1/0xc returned 0 after 91 usecs
[    2.133246] calling  proc_genhd_init+0x1/0x3c @ 1
[    2.135177] initcall proc_genhd_init+0x1/0x3c returned 0 after 181 usecs
[    2.137283] calling  deadline_init+0x1/0xc @ 1
[    2.138985] io scheduler mq-deadline registered
[    2.204145] initcall deadline_init+0x1/0xc returned 0 after 63637 usecs
[    2.206230] calling  kyber_init+0x1/0xc @ 1
[    2.207895] io scheduler kyber registered
[    2.209005] initcall kyber_init+0x1/0xc returned 0 after 1092 usecs
[    2.211339] calling  of_fixed_factor_clk_driver_init+0x1/0xc @ 1
[    2.215120] initcall of_fixed_factor_clk_driver_init+0x1/0xc returned 0 after 1730 usecs
[    2.217701] calling  of_fixed_clk_driver_init+0x1/0xc @ 1
[    2.221661] initcall of_fixed_clk_driver_init+0x1/0xc returned 0 after 1712 usecs
[    2.224135] calling  gpio_clk_driver_init+0x1/0xc @ 1
[    2.228240] initcall gpio_clk_driver_init+0x1/0xc returned 0 after 2212 usecs
[    2.230756] calling  reset_simple_driver_init+0x1/0xc @ 1
[    2.241954] initcall reset_simple_driver_init+0x1/0xc returned 0 after 9384 usecs
[    2.244115] calling  n_null_init+0x1/0x14 @ 1
[    2.245544] initcall n_null_init+0x1/0x14 returned 0 after 8 usecs
[    2.247298] calling  sysrq_init+0x1/0x30 @ 1
[    2.248958] initcall sysrq_init+0x1/0x30 returned 0 after 250 usecs
[    2.251031] calling  stm32_usart_init+0x1/0x3c @ 1
[    2.252533] STM32 USART driver initialized
[    2.318786] 40011000.serial: ttySTM0 at MMIO 0x40011000 (irq = 34, base_baud = 5625000) is a stm32-usart
[    2.621807] random: fast init done
[    4.771542] printk: console [ttySTM0] enabled
[    4.787938] initcall stm32_usart_init+0x1/0x3c returned 0 after 2475980 usecs
[    4.797206] calling  drm_kms_helper_init+0x1/0x4 @ 1
[    4.803784] initcall drm_kms_helper_init+0x1/0x4 returned 0 after 5 usecs
[    4.812510] calling  drm_core_init+0x1/0x6c @ 1
[    4.819058] initcall drm_core_init+0x1/0x6c returned 0 after 713 usecs
[    4.827480] calling  stm_drm_platform_driver_init+0x1/0xc @ 1
[    4.837132] initcall stm_drm_platform_driver_init+0x1/0xc returned 0 after 2110 usecs
[    4.847280] calling  ili9341_driver_init+0x1/0xc @ 1
[    4.854790] initcall ili9341_driver_init+0x1/0xc returned 0 after 902 usecs
[    4.863731] calling  topology_sysfs_init+0x1/0x28 @ 1
[    4.872183] initcall topology_sysfs_init+0x1/0x28 returned 0 after 1709 usecs
[    4.881343] calling  cacheinfo_sysfs_init+0x1/0x28 @ 1
[    4.887929] initcall cacheinfo_sysfs_init+0x1/0x28 returned -2 after 22 usecs
[    4.897093] calling  stm32_timers_driver_init+0x1/0xc @ 1
[    4.906312] initcall stm32_timers_driver_init+0x1/0xc returned 0 after 2044 usecs
[    4.916084] calling  stm32_spi_driver_init+0x1/0xc @ 1
[    4.962302] panel-ilitek-ili9341 spi0.1: get optional vcc failed
[    4.973282] spi_stm32 40015000.spi: driver initialized
[    4.985767] initcall stm32_spi_driver_init+0x1/0xc returned 0 after 61391 usecs
[    4.995342] calling  evdev_init+0x1/0xc @ 1
[    5.001419] initcall evdev_init+0x1/0xc returned 0 after 20 usecs
[    5.009129] calling  stmpe_ts_driver_init+0x1/0xc @ 1
[    5.017103] initcall stmpe_ts_driver_init+0x1/0xc returned 0 after 1224 usecs
[    5.026632] calling  i2c_dev_init+0x1/0x8c @ 1
[    5.032648] i2c /dev entries driver
[    5.037535] initcall i2c_dev_init+0x1/0x8c returned 0 after 4772 usecs
[    5.046023] calling  stm32f4_i2c_driver_init+0x1/0xc @ 1
[    5.080317] stmpe-i2c 0-0041: stmpe811 detected, chip id: 0x811
[    5.132138] stmpe-ts stmpe-ts: DMA mask not set
[    5.162721] input: stmpe-ts as /devices/platform/soc/40005c00.i2c/i2c-0/0-0041/stmpe-ts/input/input0
[    5.188740] stm32f4-i2c 40005c00.i2c: STM32F4 I2C driver registered
[    5.200250] initcall stm32f4_i2c_driver_init+0x1/0xc returned 0 after 143741 usecs
[    5.212863] calling  init_machine_late+0x1/0x58 @ 1
[    5.219568] initcall init_machine_late+0x1/0x58 returned 0 after 31 usecs
[    5.228245] calling  init_oops_id+0x1/0x2c @ 1
[    5.234418] initcall init_oops_id+0x1/0x2c returned 0 after 163 usecs
[    5.242778] calling  reboot_ksysfs_init+0x1/0x38 @ 1
[    5.249955] initcall reboot_ksysfs_init+0x1/0x38 returned 0 after 298 usecs
[    5.258934] calling  printk_late_init+0x1/0xec @ 1
[    5.265323] initcall printk_late_init+0x1/0xec returned 0 after 29 usecs
[    5.273939] calling  blk_timeout_init+0x1/0x10 @ 1
[    5.280560] initcall blk_timeout_init+0x1/0x10 returned 0 after 6 usecs
[    5.289080] calling  prandom_init_late+0x1/0x1c @ 1
[    5.295825] initcall prandom_init_late+0x1/0x1c returned 0 after 10 usecs
[    5.304817] calling  amba_deferred_retry+0x1/0x60 @ 1
[    5.311556] initcall amba_deferred_retry+0x1/0x60 returned 0 after 11 usecs
[    5.320545] calling  sync_state_resume_initcall+0x1/0xa @ 1
[    5.327689] initcall sync_state_resume_initcall+0x1/0xa returned 0 after 15 usecs
[    5.337528] calling  deferred_probe_initcall+0x1/0x50 @ 1
[    5.396496] [drm] Initialized stm 1.0.0 20170330 for 40016800.display-controller on minor 0
[    6.012158] panel-ilitek-ili9341 spi0.1: initialized display rgb interface
[    6.110848] Console: switching to colour frame buffer device 30x40
[    6.378820] stm32-display 40016800.display-controller: [drm] fb0: stmdrmfb frame buffer device
[    6.523104] initcall deferred_probe_initcall+0x1/0x50 returned 0 after 1150630 usecs
[    6.634869] calling  of_fdt_raw_init+0x1/0x50 @ 1
[    6.721800] initcall of_fdt_raw_init+0x1/0x50 returned 0 after 10750 usecs
[    6.837947] calling  fb_logo_late_init+0x1/0x10 @ 1
[    6.918836] initcall fb_logo_late_init+0x1/0x10 returned 0 after 6 usecs
[    7.042600] calling  clk_disable_unused+0x1/0x76 @ 1
[    7.130445] initcall clk_disable_unused+0x1/0x76 returned 0 after 2337 usecs
[    7.258552] calling  of_platform_sync_state_init+0x1/0xa @ 1
[    7.384228] initcall of_platform_sync_state_init+0x1/0xa returned 0 after 17 usecs
[    7.551241] Freeing unused kernel memory: 324K
[    7.635490] This architecture does not have kernel memory protection.
[    7.761787] Run /linuxrc as init process
[    7.845353]   with arguments:
[    7.927244]     /linuxrc
[    7.970672]   with environment:
[    8.051435]     HOME=/
[    8.093230]     TERM=linux

[-- Attachment #4: rootfs_mcu.cpio --]
[-- Type: application/x-cpio, Size: 519168 bytes --]

      reply	other threads:[~2021-06-01  8:01 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-14 11:02 dillon.minfei
2021-05-14 11:02 ` [PATCH 1/4] drm/panel: Add ilitek ili9341 panel driver dillon.minfei
2021-05-31 13:15   ` Patrice CHOTARD
2021-05-31 13:39     ` Dillon Min
2021-06-01  2:31       ` Dillon Min
2021-05-14 11:02 ` [PATCH 2/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue dillon.minfei
2021-06-01 11:43   ` Patrice CHOTARD
2021-06-01 11:58     ` Dillon Min
2021-05-14 11:02 ` [PATCH 3/4] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate dillon.minfei
2021-06-01 12:48   ` Patrice CHOTARD
2021-05-14 11:02 ` [PATCH 4/4] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup dillon.minfei
2021-06-01 12:51   ` Patrice CHOTARD
2021-05-28  6:01 ` [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform Dillon Min
2021-05-31 13:20 ` Patrice CHOTARD
2021-05-31 13:38   ` Dillon Min
2021-05-31 13:50     ` Patrice CHOTARD
2021-05-31 14:29       ` Dillon Min
2021-05-31 14:58         ` Patrice CHOTARD
2021-06-01  3:28           ` Dillon Min
2021-06-01  8:00             ` Patrice CHOTARD [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d40c6e04-6b32-e9a2-e87d-ef0004d5139c@foss.st.com \
    --to=patrice.chotard@foss.st.com \
    --cc=alain.volmat@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=christian.koenig@amd.com \
    --cc=dillon.minfei@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linaro-mm-sig@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=pierre-yves.mordret@foss.st.com \
    --cc=sboyd@kernel.org \
    --cc=sumit.semwal@linaro.org \
    --subject='Re: [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).