Re: [PATCH V1] mmc: sdhci-msm: Clear tuning done flag while hs400 tuning

[Veerabhadrarao Badiganti <vbadigan@codeaurora.org>]

On 5/29/2020 4:05 PM, Ulf Hansson wrote:
> On Thu, 28 May 2020 at 17:14, Veerabhadrarao Badiganti
> <vbadigan@codeaurora.org> wrote:
>> Clear tuning_done flag while executing tuning to ensure vendor
>> specific HS400 settings are applied properly when the controller
>> is re-initialized in HS400 mode.
>>
>> Without this, re-initialization of the qcom SDHC in HS400 mode fails
>> while resuming the driver from runtime-suspend or system-suspend.
>>
>> Fixes: ff06ce4 ("mmc: sdhci-msm: Add HS400 platform support")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
> Applied for next, thanks!
>
> Kind regards
> Uffe
Thanks Ulf.
I see a mail on this patch, that SHA in the commit text should be 12 digit.
Let me know if i have to re-post this patch by correcting it.
>> ---
>>   drivers/mmc/host/sdhci-msm.c | 6 ++++++
>>   1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
>> index 95cd973..b277dd7 100644
>> --- a/drivers/mmc/host/sdhci-msm.c
>> +++ b/drivers/mmc/host/sdhci-msm.c
>> @@ -1174,6 +1174,12 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
>>          msm_host->use_cdr = true;
>>
>>          /*
>> +        * Clear tuning_done flag before tuning to ensure proper
>> +        * HS400 settings.
>> +        */
>> +       msm_host->tuning_done = 0;
>> +
>> +       /*
>>           * For HS400 tuning in HS200 timing requires:
>>           * - select MCLK/2 in VENDOR_SPEC
>>           * - program MCLK to 400MHz (or nearest supported) in GCC
>> --
>> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
>>