linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guo Xuenan <guoxuenan@huawei.com>
To: Jens Axboe <axboe@kernel.dk>, <asml.silence@gmail.com>,
	<io-uring@vger.kernel.org>
Cc: <houtao1@huawei.com>, <yi.zhang@huawei.com>,
	<chengzhihao1@huawei.com>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] io_uring: add a schedule condition in io_submit_sqes
Date: Tue, 24 May 2022 14:58:52 +0800	[thread overview]
Message-ID: <d4bc3afb-02d5-1793-cffa-e15b2bdb0028@huawei.com> (raw)
In-Reply-To: <717768b3-4f3c-a5d8-5ca3-189a49b4c481@kernel.dk>

Hi Jens,

this piece of code is used to reproduce the problem.
it always successfuly reproduce this bug on my
arm64 qemu virtual machine.
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "liburing.h"

int main(void)
{
     int ret, i = 0;
     struct io_uring uring;
     struct io_uring_params params;
     struct io_uring_sqe *sqe;
     struct io_uring_cqe *cqe;
     struct __kernel_timespec ts = { .tv_sec = 30, .tv_nsec = 0, };

     memset(&params, 0, sizeof(params));
     ret = io_uring_queue_init_params(32768, &uring, &params);
     if (ret < 0) {
         printf("init err %d\n", errno);
         return 0;
     }

     io_uring_register_personality(&uring);
     while (i++ < 32768) {
         sqe = io_uring_get_sqe(&uring);
         io_uring_prep_timeout(sqe, &ts, rand(), 0);
     }
     io_uring_submit(&uring);
     printf("to_submit %d\n", i - 1);
     io_uring_wait_cqe_nr(&uring, &cqe, i - 1);
     return 0;
}
```
------------------------------------------------------------------------------------------
considering the performance issue when we add cond_resched() in "the 
very fast path"
you have mentationed, may we add some restriction to avoid extreme 
situtaions while
also reduceing the impact on performance.
I tested the following patch, it did work, there is no soft lockup here.

diff --git a/fs/io_uring.c b/fs/io_uring.c
index e0823f58f795..3c2e019fd124 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -7873,6 +7873,9 @@ static int io_submit_sqes(struct io_ring_ctx *ctx, 
unsigned int nr)
                         if (!(ctx->flags & IORING_SETUP_SUBMIT_ALL))
                                 break;
                 }
+               /* to avoid doing too much in one submit round */
+               if (submitted > IORING_MAX_ENTRIES / 2)
+                       cond_resched();
         } while (submitted < nr);

         if (unlikely(submitted != nr)) {

Best regards
Xuenan
On 2022/5/24 0:27, Jens Axboe wrote:
> On 5/23/22 8:45 AM, Guo Xuenan wrote:
>> Hi Jens
>>
>> On 2022/5/22 10:42, Jens Axboe wrote:
>>> On 5/21/22 8:33 AM, Guo Xuenan wrote:
>>>> when set up sq ring size with IORING_MAX_ENTRIES, io_submit_sqes may
>>>> looping ~32768 times which may trigger soft lockups. add need_resched
>>>> condition to avoid this bad situation.
>>>>
>>>> set sq ring size 32768 and using io_sq_thread to perform stress test
>>>> as follows:
>>>> watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [iou-sqp-600:601]
>>>> Kernel panic - not syncing: softlockup: hung tasks
>>>> CPU: 2 PID: 601 Comm: iou-sqp-600 Tainted: G L 5.18.0-rc7+ #3
>>>> Hardware name: linux,dummy-virt (DT)
>>>> Call trace:
>>>>    dump_backtrace+0x218/0x228
>>>>    show_stack+0x20/0x68
>>>>    dump_stack_lvl+0x68/0x84
>>>>    dump_stack+0x1c/0x38
>>>>    panic+0x1ec/0x3ec
>>>>    watchdog_timer_fn+0x28c/0x300
>>>>    __hrtimer_run_queues+0x1d8/0x498
>>>>    hrtimer_interrupt+0x238/0x558
>>>>    arch_timer_handler_virt+0x48/0x60
>>>>    handle_percpu_devid_irq+0xdc/0x270
>>>>    generic_handle_domain_irq+0x50/0x70
>>>>    gic_handle_irq+0x8c/0x4bc
>>>>    call_on_irq_stack+0x2c/0x38
>>>>    do_interrupt_handler+0xc4/0xc8
>>>>    el1_interrupt+0x48/0xb0
>>>>    el1h_64_irq_handler+0x18/0x28
>>>>    el1h_64_irq+0x74/0x78
>>>>    console_unlock+0x5d0/0x908
>>>>    vprintk_emit+0x21c/0x470
>>>>    vprintk_default+0x40/0x50
>>>>    vprintk+0xd0/0x128
>>>>    _printk+0xb4/0xe8
>>>>    io_issue_sqe+0x1784/0x2908
>>>>    io_submit_sqes+0x538/0x2880
>>>>    io_sq_thread+0x328/0x7b0
>>>>    ret_from_fork+0x10/0x20
>>>> SMP: stopping secondary CPUs
>>>> Kernel Offset: 0x40f1e8600000 from 0xffff800008000000
>>>> PHYS_OFFSET: 0xfffffa8c80000000
>>>> CPU features: 0x110,0000cf09,00001006
>>>> Memory Limit: none
>>>> ---[ end Kernel panic - not syncing: softlockup: hung tasks ]---
>>>>
>>>> Signed-off-by: Guo Xuenan <guoxuenan@huawei.com>
>>>> ---
>>>>    fs/io_uring.c | 2 +-
>>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/fs/io_uring.c b/fs/io_uring.c
>>>> index 92ac50f139cd..d897c6798f00 100644
>>>> --- a/fs/io_uring.c
>>>> +++ b/fs/io_uring.c
>>>> @@ -7864,7 +7864,7 @@ static int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr)
>>>>                if (!(ctx->flags & IORING_SETUP_SUBMIT_ALL))
>>>>                    break;
>>>>            }
>>>> -    } while (submitted < nr);
>>>> +    } while (submitted < nr && !need_resched());
>>>>          if (unlikely(submitted != nr)) {
>>>>            int ref_used = (submitted == -EAGAIN) ? 0 : submitted;
>>> This is wrong, you'll potentially end up doing random short submits for
>>> non-sqpoll as well.
>> Sorry, Indeed, this is not a good solution. Since, the function
>> io_submit_sqes not only called by io_sq_thread, it also called by
>> syscall io_uring_enter sending large amounts of requests, will also
>> trigger soft lockup.
> Exactly.
>
>>> sqpoll already supports capping how many it submits in one go, it just
>>> doesn't do it if it's only running one ring. As simple as the below,
>>> with 1024 pulled out of thin air. Would be great if you could experiment
>>> and submit a v2 based on this principle instead. Might still need a
>> yes, Jens, your patch sloved sq-poll-thread problem, but the problem
>> may not completely solved; when using syscall io_uring_enter to
>> subimit large amounts of requests.So in my opinion How about 1) add
>> cond_resched() in the while cycle part of io_submit_sqes ?. OR 2) set
>> macro IORING_MAX_ENTRIES smaller? (i'm curious about the value,why we
>> set it with 32768)
> I did suspect this isn't specific to SQPOLL at all.
>
> Might make sense to cap batches of non-sqpoll as well, and for each
> batch, have a cond_resched() just in case. If you change
> IORING_MAX_ENTRIES to something smaller, you risk breaking applications
> that currently (for whatever reason) may have set up an SQ ring of that
> side. So that is not a viable solution, and honestly wouldn't be a good
> option even if that weren't the case.
>
> So the simple solution is just to do it in io_submit_sqes() itself, but
> would need to be carefully benchmarked to make sure that it doesn't
> regress anything. It's the very fast path, and for real use cases you'd
> never run into this problem. Even for a synthetic use case, it sounds
> highly suspicious that nothing in the call path ends up doing a
> conditional reschedule. What kind of requests are being submitted when
> you hit this?
>

      reply	other threads:[~2022-05-24  6:59 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-21 14:33 [PATCH] io_uring: add a schedule condition in io_submit_sqes Guo Xuenan
2022-05-22  2:42 ` Jens Axboe
2022-05-23 14:45   ` Guo Xuenan
2022-05-23 16:27     ` Jens Axboe
2022-05-24  6:58       ` Guo Xuenan [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d4bc3afb-02d5-1793-cffa-e15b2bdb0028@huawei.com \
    --to=guoxuenan@huawei.com \
    --cc=asml.silence@gmail.com \
    --cc=axboe@kernel.dk \
    --cc=chengzhihao1@huawei.com \
    --cc=houtao1@huawei.com \
    --cc=io-uring@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yi.zhang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).