linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>, Tim Harvey <tharvey@gateworks.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Adam Ford <aford173@gmail.com>
Subject: Re: [PATCH] arm64: dts: imx8mn-venice-gw7902: disable gpu
Date: Wed, 26 Jan 2022 10:58:56 +0100	[thread overview]
Message-ID: <d5a15039255d13cf4321bf1c18f49a9cdb666607.camel@pengutronix.de> (raw)
In-Reply-To: <20220126093558.GL4686@dragon>

Am Mittwoch, dem 26.01.2022 um 17:35 +0800 schrieb Shawn Guo:
> On Thu, Dec 16, 2021 at 08:12:27AM -0800, Tim Harvey wrote:
> > Since commit 99aa29932271 ("arm64: dts: imx8mn: Enable GPU")
> > imx8mn-venice-gw7902 will hang during kernel init because it uses
> > a MIMX8MN5CVTI which does not have a GPU.
> 
> I do not quite follow on this.  i.MX8MN integrates a GPU, and
> MIMX8MN5CVTI is built on i.MX8MN, correct?  If so, how comes
> MIMX8MN5CVTI doesn't have a GPU?
> 
It's a fused-down variant of the i.MX8MN that has the GPU disabled by
fuses.

> > 
> > Disable pgc_gpumix to work around this. We also disable the GPU devices
> > that depend on the gpumix power domain and pgc_gpu to avoid them staying
> > in a probe deferred state forever.
> 
> Is this an indication that GPU should be disabled in imx8mn.dtsi and
> enabled board by board?
> 
There's a trade-off here: most boards will probably use the full
variants that include the GPU, so probably less boards will need to
disable the GPU, as done here, than boards that need to enable it when
the base DT disables the GPU.

Same story as with the i.MX6 where there are some SKUs that disable the
VPU by fuses: we enable it in the base DT and if you happen to build a
very low-cost board that uses the fused-down version you need to
disable it in the board DT.

Regards,
Lucas

> Shawn
> 
> > 
> > Cc: Adam Ford <aford173@gmail.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> > ---
> >  .../boot/dts/freescale/imx8mn-venice-gw7902.dts      | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
> > index 236f425e1570..2d58005d20e4 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
> > @@ -220,6 +220,10 @@
> >  	};
> >  };
> >  
> > +&disp_blk_ctrl {
> > +	status = "disabled";
> > +};
> > +
> >  /* off-board header */
> >  &ecspi2 {
> >  	pinctrl-names = "default";
> > @@ -251,6 +255,10 @@
> >  	};
> >  };
> >  
> > +&gpu {
> > +	status = "disabled";
> > +};
> > +
> >  &i2c1 {
> >  	clock-frequency = <100000>;
> >  	pinctrl-names = "default";
> > @@ -546,6 +554,10 @@
> >  	status = "okay";
> >  };
> >  
> > +&pgc_gpumix {
> > +	status = "disabled";
> > +};
> > +
> >  /* off-board header */
> >  &sai3 {
> >  	pinctrl-names = "default";
> > -- 
> > 2.17.1
> > 



  reply	other threads:[~2022-01-26  9:59 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-16 16:12 [PATCH] arm64: dts: imx8mn-venice-gw7902: disable gpu Tim Harvey
2021-12-16 17:02 ` Adam Ford
2022-01-26  9:35 ` Shawn Guo
2022-01-26  9:58   ` Lucas Stach [this message]
2022-01-26 11:56     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d5a15039255d13cf4321bf1c18f49a9cdb666607.camel@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=aford173@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).