linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Mateusz Jończyk" <mat.jonczyk@o2.pl>
To: linux-kernel@vger.kernel.org, x86@kernel.org,
	linux-hwmon@vger.kernel.org
Cc: "Pali Rohár" <pali@kernel.org>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Ingo Molnar" <mingo@redhat.com>,
	"Borislav Petkov" <bp@alien8.de>,
	"Dave Hansen" <dave.hansen@linux.intel.com>,
	"Jean Delvare" <jdelvare@suse.com>,
	"Guenter Roeck" <linux@roeck-us.net>,
	"Hans de Goede" <hdegoede@redhat.com>,
	"Mark Gross" <markgross@kernel.org>
Subject: Re: [PATCH 1/2] x86/Kconfig: move and modify CONFIG_I8K
Date: Mon, 7 Feb 2022 19:53:40 +0100	[thread overview]
Message-ID: <d5cedee5-5f1e-8a11-1f4d-82e43f0753ed@o2.pl> (raw)
In-Reply-To: <20220207182940.242838-1-mat.jonczyk@o2.pl>

W dniu 07.02.2022 o 19:29, Mateusz Jończyk pisze:
> In Kconfig, inside the "Processor type and features" menu, there is
> the CONFIG_I8K option: "Dell i8k legacy laptop support". This is
> very confusing - enabling CONFIG_I8K is not required for the kernel to
> support old Dell laptops. This option is specific to the dell-smm-hwmon
> driver, which mostly exports some hardware monitoring information and
> allows the user to change fan speed.
>
> This option is misplaced, so move CONFIG_I8K to drivers/hwmon/Kconfig,
> where it belongs.
>
> Also, modify the dependency order - change
>         select SENSORS_DELL_SMM
> to
>         depends on SENSORS_DELL_SMM
> as it is just a configuration option of dell-smm-hwmon. This includes
> changing the option type from tristate to bool. It was tristate because
> it could select CONFIG_SENSORS_DELL_SMM=m .
>
> When running "make oldconfig" on configurations with
> CONFIG_SENSORS_DELL_SMM enabled , this change will result in an
> additional question (which could be printed several times during
> bisecting). I think that tidying up the configuration is worth it,
> though.
>
> Next patch tweaks the description of CONFIG_I8K.
>
> Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
> Cc: Pali Rohár <pali@kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: Dave Hansen <dave.hansen@linux.intel.com>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Mark Gross <markgross@kernel.org>
> ---
>  arch/x86/Kconfig      | 17 -----------------
>  drivers/hwmon/Kconfig | 15 +++++++++++++++
>  2 files changed, 15 insertions(+), 17 deletions(-)
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 9f5bd41bf660..71d4ddd48c02 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -1275,23 +1275,6 @@ config TOSHIBA
>  	  Say Y if you intend to run this kernel on a Toshiba portable.
>  	  Say N otherwise.
>  
> -config I8K
> -	tristate "Dell i8k legacy laptop support"
> -	depends on HWMON
> -	depends on PROC_FS
> -	select SENSORS_DELL_SMM
> -	help
> -	  This option enables legacy /proc/i8k userspace interface in hwmon
> -	  dell-smm-hwmon driver. Character file /proc/i8k reports bios version,
> -	  temperature and allows controlling fan speeds of Dell laptops via
> -	  System Management Mode. For old Dell laptops (like Dell Inspiron 8000)
> -	  it reports also power and hotkey status. For fan speed control is
> -	  needed userspace package i8kutils.
> -
> -	  Say Y if you intend to run this kernel on old Dell laptops or want to
> -	  use userspace package i8kutils.
> -	  Say N otherwise.
> -
>  config X86_REBOOTFIXUPS
>  	bool "Enable X86 board specific fixups for reboot"
>  	depends on X86_32
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 8df25f1079ba..dd244aa747ad 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -505,6 +505,21 @@ config SENSORS_DELL_SMM
>  	  When option I8K is also enabled this driver provides legacy /proc/i8k
>  	  userspace interface for i8kutils package.
>  
> +config I8K
> +	bool "Dell i8k legacy laptop support"
> +	depends on SENSORS_DELL_SMM

Oops, I dropped "depends on PROC_FS". Will fix this in next revision.

> +	help
> +	  This option enables legacy /proc/i8k userspace interface in hwmon
> +	  dell-smm-hwmon driver. Character file /proc/i8k reports bios version,
> +	  temperature and allows controlling fan speeds of Dell laptops via
> +	  System Management Mode. For old Dell laptops (like Dell Inspiron 8000)
> +	  it reports also power and hotkey status. For fan speed control is
> +	  needed userspace package i8kutils.
> +
> +	  Say Y if you intend to run this kernel on old Dell laptops or want to
> +	  use userspace package i8kutils.
> +	  Say N otherwise.
> +
>  config SENSORS_DA9052_ADC
>  	tristate "Dialog DA9052/DA9053 ADC"
>  	depends on PMIC_DA9052

Greetings,

Mateusz


  parent reply	other threads:[~2022-02-07 18:58 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-07 18:29 [PATCH 1/2] x86/Kconfig: move and modify CONFIG_I8K Mateusz Jończyk
2022-02-07 18:29 ` [PATCH 2/2] dell-smm-hwmon: rewrite CONFIG_I8K description Mateusz Jończyk
2022-02-07 18:47   ` Randy Dunlap
2022-02-07 18:51 ` [PATCH 1/2] x86/Kconfig: move and modify CONFIG_I8K Hans de Goede
2022-02-07 18:57   ` Borislav Petkov
2022-02-07 19:31   ` Mateusz Jończyk
2022-02-07 21:18     ` Hans de Goede
2022-02-07 18:51 ` Randy Dunlap
2022-02-07 18:53 ` Mateusz Jończyk [this message]
2022-02-12 12:56 Mateusz Jończyk
2022-02-13 15:25 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d5cedee5-5f1e-8a11-1f4d-82e43f0753ed@o2.pl \
    --to=mat.jonczyk@o2.pl \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hdegoede@redhat.com \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=markgross@kernel.org \
    --cc=mingo@redhat.com \
    --cc=pali@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).