From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
dja@axtens.net
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-mm@kvack.org
Subject: [PATCH v5 14/17] powerpc/8xx: Enable CONFIG_VMAP_STACK
Date: Sat, 21 Dec 2019 08:32:35 +0000 (UTC) [thread overview]
Message-ID: <d7ba1e34e80898310d6a314cbebe48baa32894ef.1576916812.git.christophe.leroy@c-s.fr> (raw)
In-Reply-To: <cover.1576916812.git.christophe.leroy@c-s.fr>
This patch enables CONFIG_VMAP_STACK. For that, a few changes are
done in head_8xx.S.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/head_8xx.S | 32 ++++++++++++++++++++++++++------
arch/powerpc/platforms/Kconfig.cputype | 1 +
2 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 225e242ce1c5..477933b36bde 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -127,7 +127,7 @@ instruction_counter:
/* Machine check */
. = 0x200
MachineCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG handle_dar_dsisr=1
save_dar_dsisr_on_stack r4, r5, r11
li r6, RPN_PATTERN
mtspr SPRN_DAR, r6 /* Tag DAR, to be used in DTLB Error */
@@ -140,7 +140,7 @@ MachineCheck:
/* Alignment exception */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG handle_dar_dsisr=1
save_dar_dsisr_on_stack r4, r5, r11
li r6, RPN_PATTERN
mtspr SPRN_DAR, r6 /* Tag DAR, to be used in DTLB Error */
@@ -457,20 +457,26 @@ InstructionTLBError:
*/
. = 0x1400
DataTLBError:
- EXCEPTION_PROLOG_0
+ EXCEPTION_PROLOG_0 handle_dar_dsisr=1
mfspr r11, SPRN_DAR
cmpwi cr1, r11, RPN_PATTERN
beq- cr1, FixupDAR /* must be a buggy dcbX, icbi insn. */
DARFixed:/* Return from dcbx instruction bug workaround */
+#ifdef CONFIG_VMAP_STACK
+ li r11, RPN_PATTERN
+ mtspr SPRN_DAR, r11 /* Tag DAR, to be used in DTLB Error */
+#endif
EXCEPTION_PROLOG_1
- EXCEPTION_PROLOG_2
+ EXCEPTION_PROLOG_2 handle_dar_dsisr=1
get_and_save_dar_dsisr_on_stack r4, r5, r11
andis. r10,r5,DSISR_NOHPTE@h
beq+ .Ldtlbie
tlbie r4
.Ldtlbie:
+#ifndef CONFIG_VMAP_STACK
li r10,RPN_PATTERN
mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */
+#endif
/* 0x300 is DataAccess exception, needed by bad_page_fault() */
EXC_XFER_LITE(0x300, handle_page_fault)
@@ -486,22 +492,29 @@ DARFixed:/* Return from dcbx instruction bug workaround */
rfi
#endif
+stack_overflow:
+ vmap_stack_overflow_exception
+
/* On the MPC8xx, these next four traps are used for development
* support of breakpoints and such. Someday I will get around to
* using them.
*/
do_databreakpoint:
EXCEPTION_PROLOG_1
- EXCEPTION_PROLOG_2
+ EXCEPTION_PROLOG_2 handle_dar_dsisr=1
addi r3,r1,STACK_FRAME_OVERHEAD
mfspr r4,SPRN_BAR
stw r4,_DAR(r11)
+#ifdef CONFIG_VMAP_STACK
+ lwz r5,_DSISR(r11)
+#else
mfspr r5,SPRN_DSISR
+#endif
EXC_XFER_STD(0x1c00, do_break)
. = 0x1c00
DataBreakpoint:
- EXCEPTION_PROLOG_0
+ EXCEPTION_PROLOG_0 handle_dar_dsisr=1
mfspr r11, SPRN_SRR0
cmplwi cr1, r11, (.Ldtlbie - PAGE_OFFSET)@l
cmplwi cr7, r11, (.Litlbie - PAGE_OFFSET)@l
@@ -650,7 +663,14 @@ FixupDAR:/* Entry point for dcbx workaround. */
152:
mfdar r11
mtctr r11 /* restore ctr reg from DAR */
+#ifdef CONFIG_VMAP_STACK
+ mfspr r11, SPRN_SPRG_THREAD
+ stw r10, DAR(r11)
+ mfspr r10, SPRN_DSISR
+ stw r10, DSISR(r11)
+#else
mtdar r10 /* save fault EA to DAR */
+#endif
mfspr r10,SPRN_M_TW
b DARFixed /* Go back to normal TLB handling */
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 8d7f9c3dc771..000dd297337c 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -49,6 +49,7 @@ config PPC_8xx
select PPC_HAVE_KUEP
select PPC_HAVE_KUAP
select PPC_MM_SLICES if HUGETLB_PAGE
+ select HAVE_ARCH_VMAP_STACK
config 40x
bool "AMCC 40x"
--
2.13.3
next prev parent reply other threads:[~2019-12-21 8:32 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-21 8:32 [PATCH v5 00/17] Enable CONFIG_VMAP_STACK on PPC32 Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 01/17] powerpc/32: replace MTMSRD() by mtmsr Christophe Leroy
2020-01-29 5:17 ` Michael Ellerman
2019-12-21 8:32 ` [PATCH v5 02/17] powerpc/32: Add EXCEPTION_PROLOG_0 in head_32.h Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 03/17] powerpc/32: save DEAR/DAR before calling handle_page_fault Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 04/17] powerpc/32: move MSR_PR test into EXCEPTION_PROLOG_0 Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 05/17] powerpc/32: add a macro to get and/or save DAR and DSISR on stack Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 06/17] powerpc/32: prepare for CONFIG_VMAP_STACK Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 07/17] powerpc: align stack to 2 * THREAD_SIZE with VMAP_STACK Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 08/17] powerpc/32: Add early stack overflow detection with VMAP stack Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 09/17] powerpc/32: Use vmapped stacks for interrupts Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 10/17] powerpc/8xx: Use alternative scratch registers in DTLB miss handler Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 11/17] powerpc/8xx: drop exception entries for non-existing exceptions Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 12/17] powerpc/8xx: move DataStoreTLBMiss perf handler Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 13/17] powerpc/8xx: split breakpoint exception Christophe Leroy
2019-12-21 8:32 ` Christophe Leroy [this message]
2019-12-21 8:32 ` [PATCH v5 15/17] powerpc/32s: reorganise DSI handler Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 16/17] powerpc/32s: avoid crossing page boundary while changing SRR0/1 Christophe Leroy
2019-12-21 8:32 ` [PATCH v5 17/17] powerpc/32s: Enable CONFIG_VMAP_STACK Christophe Leroy
2020-01-18 12:46 ` Michael Ellerman
2020-02-06 20:31 ` Guenter Roeck
2020-02-07 6:13 ` Christophe Leroy
2020-02-07 8:28 ` Christophe Leroy
2020-02-07 13:08 ` Guenter Roeck
2020-02-07 13:29 ` Christophe Leroy
2020-02-07 13:44 ` Guenter Roeck
2020-02-07 17:16 ` Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d7ba1e34e80898310d6a314cbebe48baa32894ef.1576916812.git.christophe.leroy@c-s.fr \
--to=christophe.leroy@c-s.fr \
--cc=benh@kernel.crashing.org \
--cc=dja@axtens.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).