From: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Oleksij Rempel <o.rempel@pengutronix.de>,
mailhol.vincent@wanadoo.fr, sudheer.mogilappagari@intel.com,
sbhatta@marvell.com, linux-doc@vger.kernel.org,
wangjie125@huawei.com, corbet@lwn.net, lkp@intel.com,
gal@nvidia.com, gustavoars@kernel.org
Subject: [PATCH v2 net-next 2/5] drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY
Date: Fri, 6 Jan 2023 19:44:44 +0100 [thread overview]
Message-ID: <d7d3501203849891c884e8b7b7803f1cedfa1c97.1673030528.git.piergiorgio.beruto@gmail.com> (raw)
In-Reply-To: <cover.1673030528.git.piergiorgio.beruto@gmail.com>
This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S
Ethernet PHY. According to the specifications, the 10BASE-T1S supports
Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or
Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
---
drivers/net/phy/phy-core.c | 5 ++++-
drivers/net/phy/phy_device.c | 14 ++++++++++++++
drivers/net/phy/phylink.c | 6 +++++-
include/linux/phy.h | 14 ++++++++++++++
include/uapi/linux/ethtool.h | 3 +++
net/ethtool/common.c | 8 ++++++++
6 files changed, 48 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 5d08c627a516..a64186dc53f8 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -13,7 +13,7 @@
*/
const char *phy_speed_to_str(int speed)
{
- BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 99,
+ BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 102,
"Enum ethtool_link_mode_bit_indices and phylib are out of sync. "
"If a speed or mode has been added please update phy_speed_to_str "
"and the PHY settings array.\n");
@@ -260,6 +260,9 @@ static const struct phy_setting settings[] = {
PHY_SETTING( 10, FULL, 10baseT_Full ),
PHY_SETTING( 10, HALF, 10baseT_Half ),
PHY_SETTING( 10, FULL, 10baseT1L_Full ),
+ PHY_SETTING( 10, FULL, 10baseT1S_Full ),
+ PHY_SETTING( 10, HALF, 10baseT1S_Half ),
+ PHY_SETTING( 10, HALF, 10baseT1S_P2MP_Half ),
};
#undef PHY_SETTING
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 716870a4499c..8e48b3cec5e7 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -45,6 +45,9 @@ EXPORT_SYMBOL_GPL(phy_basic_features);
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_basic_t1_features);
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1s_p2mp_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_basic_t1s_p2mp_features);
+
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_gbit_features);
@@ -98,6 +101,12 @@ const int phy_basic_t1_features_array[3] = {
};
EXPORT_SYMBOL_GPL(phy_basic_t1_features_array);
+const int phy_basic_t1s_p2mp_features_array[2] = {
+ ETHTOOL_LINK_MODE_TP_BIT,
+ ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT,
+};
+EXPORT_SYMBOL_GPL(phy_basic_t1s_p2mp_features_array);
+
const int phy_gbit_features_array[2] = {
ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
@@ -138,6 +147,11 @@ static void features_init(void)
ARRAY_SIZE(phy_basic_t1_features_array),
phy_basic_t1_features);
+ /* 10 half, P2MP, TP */
+ linkmode_set_bit_array(phy_basic_t1s_p2mp_features_array,
+ ARRAY_SIZE(phy_basic_t1s_p2mp_features_array),
+ phy_basic_t1s_p2mp_features);
+
/* 10/100 half/full + 1000 half/full */
linkmode_set_bit_array(phy_basic_ports_array,
ARRAY_SIZE(phy_basic_ports_array),
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 09cc65c0da93..319790221d7f 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -241,12 +241,16 @@ void phylink_caps_to_linkmodes(unsigned long *linkmodes, unsigned long caps)
if (caps & MAC_ASYM_PAUSE)
__set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes);
- if (caps & MAC_10HD)
+ if (caps & MAC_10HD) {
__set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, linkmodes);
+ __set_bit(ETHTOOL_LINK_MODE_10baseT1S_Half_BIT, linkmodes);
+ __set_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT, linkmodes);
+ }
if (caps & MAC_10FD) {
__set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, linkmodes);
__set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, linkmodes);
+ __set_bit(ETHTOOL_LINK_MODE_10baseT1S_Full_BIT, linkmodes);
}
if (caps & MAC_100HD) {
diff --git a/include/linux/phy.h b/include/linux/phy.h
index c2c04b989cc2..1e87d3f05209 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -45,6 +45,7 @@
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1s_p2mp_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init;
@@ -54,6 +55,7 @@ extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_ini
#define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features)
#define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features)
+#define PHY_BASIC_T1S_P2MP_FEATURES ((unsigned long *)&phy_basic_t1s_p2mp_features)
#define PHY_GBIT_FEATURES ((unsigned long *)&phy_gbit_features)
#define PHY_GBIT_FIBRE_FEATURES ((unsigned long *)&phy_gbit_fibre_features)
#define PHY_GBIT_ALL_PORTS_FEATURES ((unsigned long *)&phy_gbit_all_ports_features)
@@ -66,6 +68,7 @@ extern const int phy_fibre_port_array[1];
extern const int phy_all_ports_features_array[7];
extern const int phy_10_100_features_array[4];
extern const int phy_basic_t1_features_array[3];
+extern const int phy_basic_t1s_p2mp_features_array[2];
extern const int phy_gbit_features_array[2];
extern const int phy_10gbit_features_array[1];
@@ -1036,6 +1039,17 @@ struct phy_driver {
int (*get_sqi)(struct phy_device *dev);
/** @get_sqi_max: Get the maximum signal quality indication */
int (*get_sqi_max)(struct phy_device *dev);
+
+ /* PLCA RS interface */
+ /** @get_plca_cfg: Return the current PLCA configuration */
+ int (*get_plca_cfg)(struct phy_device *dev,
+ struct phy_plca_cfg *plca_cfg);
+ /** @set_plca_cfg: Set the PLCA configuration */
+ int (*set_plca_cfg)(struct phy_device *dev,
+ const struct phy_plca_cfg *plca_cfg);
+ /** @get_plca_status: Return the current PLCA status info */
+ int (*get_plca_status)(struct phy_device *dev,
+ struct phy_plca_status *plca_st);
};
#define to_phy_driver(d) container_of(to_mdio_common_driver(d), \
struct phy_driver, mdiodrv)
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 58e587ba0450..5f414deacf23 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1741,6 +1741,9 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_800000baseDR8_2_Full_BIT = 96,
ETHTOOL_LINK_MODE_800000baseSR8_Full_BIT = 97,
ETHTOOL_LINK_MODE_800000baseVR8_Full_BIT = 98,
+ ETHTOOL_LINK_MODE_10baseT1S_Full_BIT = 99,
+ ETHTOOL_LINK_MODE_10baseT1S_Half_BIT = 100,
+ ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT = 101,
/* must be last entry */
__ETHTOOL_LINK_MODE_MASK_NBITS
diff --git a/net/ethtool/common.c b/net/ethtool/common.c
index 6f399afc2ff2..5fb19050991e 100644
--- a/net/ethtool/common.c
+++ b/net/ethtool/common.c
@@ -208,6 +208,9 @@ const char link_mode_names[][ETH_GSTRING_LEN] = {
__DEFINE_LINK_MODE_NAME(800000, DR8_2, Full),
__DEFINE_LINK_MODE_NAME(800000, SR8, Full),
__DEFINE_LINK_MODE_NAME(800000, VR8, Full),
+ __DEFINE_LINK_MODE_NAME(10, T1S, Full),
+ __DEFINE_LINK_MODE_NAME(10, T1S, Half),
+ __DEFINE_LINK_MODE_NAME(10, T1S_P2MP, Half),
};
static_assert(ARRAY_SIZE(link_mode_names) == __ETHTOOL_LINK_MODE_MASK_NBITS);
@@ -244,6 +247,8 @@ static_assert(ARRAY_SIZE(link_mode_names) == __ETHTOOL_LINK_MODE_MASK_NBITS);
#define __LINK_MODE_LANES_X 1
#define __LINK_MODE_LANES_FX 1
#define __LINK_MODE_LANES_T1L 1
+#define __LINK_MODE_LANES_T1S 1
+#define __LINK_MODE_LANES_T1S_P2MP 1
#define __LINK_MODE_LANES_VR8 8
#define __LINK_MODE_LANES_DR8_2 8
@@ -366,6 +371,9 @@ const struct link_mode_info link_mode_params[] = {
__DEFINE_LINK_MODE_PARAMS(800000, DR8_2, Full),
__DEFINE_LINK_MODE_PARAMS(800000, SR8, Full),
__DEFINE_LINK_MODE_PARAMS(800000, VR8, Full),
+ __DEFINE_LINK_MODE_PARAMS(10, T1S, Full),
+ __DEFINE_LINK_MODE_PARAMS(10, T1S, Half),
+ __DEFINE_LINK_MODE_PARAMS(10, T1S_P2MP, Half),
};
static_assert(ARRAY_SIZE(link_mode_params) == __ETHTOOL_LINK_MODE_MASK_NBITS);
--
2.37.4
next prev parent reply other threads:[~2023-01-06 18:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-06 18:43 [PATCH v2 net-next 0/5] add PLCA RS support and onsemi NCN26000 Piergiorgio Beruto
2023-01-06 18:44 ` [PATCH v2 net-next 1/5] net/ethtool: add netlink interface for the PLCA RS Piergiorgio Beruto
2023-01-07 17:29 ` Andrew Lunn
2023-01-06 18:44 ` Piergiorgio Beruto [this message]
2023-01-07 17:31 ` [PATCH v2 net-next 2/5] drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY Andrew Lunn
2023-01-06 18:45 ` [PATCH v2 net-next 3/5] drivers/net/phy: add connection between ethtool and phylib for PLCA Piergiorgio Beruto
2023-01-07 17:37 ` Andrew Lunn
2023-01-08 23:48 ` Piergiorgio Beruto
2023-01-06 18:45 ` [PATCH v2 net-next 4/5] drivers/net/phy: add helpers to get/set PLCA configuration Piergiorgio Beruto
2023-01-07 18:07 ` Andrew Lunn
2023-01-08 23:50 ` Piergiorgio Beruto
2023-01-06 18:45 ` [PATCH v2 net-next 5/5] drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY Piergiorgio Beruto
2023-01-07 18:23 ` Andrew Lunn
2023-01-08 23:57 ` Piergiorgio Beruto
2023-01-09 13:31 ` Andrew Lunn
2023-01-09 14:21 ` Piergiorgio Beruto
2023-01-09 14:24 ` Andrew Lunn
2023-01-09 17:12 ` Piergiorgio Beruto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d7d3501203849891c884e8b7b7803f1cedfa1c97.1673030528.git.piergiorgio.beruto@gmail.com \
--to=piergiorgio.beruto@gmail.com \
--cc=andrew@lunn.ch \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gal@nvidia.com \
--cc=gustavoars@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lkp@intel.com \
--cc=mailhol.vincent@wanadoo.fr \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=sbhatta@marvell.com \
--cc=sudheer.mogilappagari@intel.com \
--cc=wangjie125@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).