[RFC 3/8] phy: Add PHY standard HDMI opts to the PHY API

[Nelson Costa <Nelson.Costa@synopsys.com>]

This adds the new options to give support for HDMI
PHYs in a standard way. This is mainly useful when
the HDMI PHY requires parameters to be passed by
"phy_configure" function.

For this, the new struct phy_configure_opts_hdmi
was added with the required generic and standard
parameters.

Signed-off-by: Nelson Costa <nelson.costa@synopsys.com>
---
 include/linux/phy/phy-hdmi.h | 102 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/phy/phy.h      |   7 ++-
 2 files changed, 108 insertions(+), 1 deletion(-)
 create mode 100644 include/linux/phy/phy-hdmi.h

diff --git a/include/linux/phy/phy-hdmi.h b/include/linux/phy/phy-hdmi.h
new file mode 100644
index 0000000..62334f4
--- /dev/null
+++ b/include/linux/phy/phy-hdmi.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 - present Synopsys, Inc. and/or its affiliates.
+ * HDMI generic PHY options.
+ *
+ * Author: Nelson Costa <nelson.costa@synopsys.com>
+ */
+#ifndef __PHY_HDMI_H_
+#define __PHY_HDMI_H_
+
+#include <linux/types.h>
+
+/**
+ * struct phy_configure_opts_hdmi - HDMI PHY configuration set
+ *
+ * This structure is used to represent the configuration state of an
+ * HDMI PHY.
+ */
+struct phy_configure_opts_hdmi {
+	/**
+	 * @color_depth:
+	 *
+	 * Color depth, as specified by HDMI specification, represents the
+	 * number of bits per pixel.
+	 *
+	 * Allowed values: 24, 30, 36, 48
+	 *
+	 */
+	u8 color_depth;
+
+	/**
+	 * @tmds_bit_clock_ratio:
+	 *
+	 * Flag indicating, as specified by HDMI specification, the relation
+	 * between TMDS Clock Rate and TMDS Character Rate.
+	 *
+	 * As specified by HDMI specification:
+	 *
+	 * tmds_bit_clock_ratio = 0, for TMDS Character Rates <= 340 Mcsc
+	 * (TMDS Clock Rate = TMDS Character Rate)
+	 *
+	 * tmds_bit_clock_ratio = 1, for TMDS Character Rates > 340 Mcsc
+	 * (TMDS Clock Rate = TMDS Character Rate / 4)
+	 *
+	 */
+	u8 tmds_bit_clock_ratio;
+
+	/**
+	 * @scrambling:
+	 *
+	 * Scrambling, as specified by HDMI specification, enables the technique
+	 * to reduce the EMI/RFI.
+	 *
+	 */
+	u8 scrambling;
+
+	/**
+	 * @calibration_acq:
+	 *
+	 * Calibration acquisitions number for the calibration algorithm.
+	 *
+	 */
+	unsigned int calibration_acq;
+
+	/**
+	 * @calibration_force:
+	 *
+	 * Flag indicating, to force calibration algorithm even if the MPLL
+	 * status didn't change from previous run calibration.
+	 *
+	 */
+	u8 calibration_force;
+
+	/**
+	 * @set_color_depth:
+	 *
+	 * Flag indicating, whether or not reconfigure deep_color
+	 * to requested values.
+	 *
+	 */
+	u8 set_color_depth : 1;
+
+	/**
+	 * @set_tmds_bit_clock_ratio:
+	 *
+	 * Flag indicating, whether or not reconfigure tmds_bit_clock_ratio
+	 * to requested values.
+	 *
+	 */
+	u8 set_tmds_bit_clock_ratio : 1;
+
+	/**
+	 * @set_scrambling:
+	 *
+	 * Flag indicating, whether or not reconfigure scrambling
+	 * to requested values.
+	 *
+	 */
+	u8 set_scrambling : 1;
+};
+
+#endif /* __PHY_HDMI_H_ */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index e435bdb..8b1aaa4 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -18,6 +18,7 @@
 
 #include <linux/phy/phy-dp.h>
 #include <linux/phy/phy-mipi-dphy.h>
+#include <linux/phy/phy-hdmi.h>
 
 struct phy;
 
@@ -41,7 +42,8 @@ enum phy_mode {
 	PHY_MODE_MIPI_DPHY,
 	PHY_MODE_SATA,
 	PHY_MODE_LVDS,
-	PHY_MODE_DP
+	PHY_MODE_DP,
+	PHY_MODE_HDMI
 };
 
 /**
@@ -51,10 +53,13 @@ enum phy_mode {
  *		the MIPI_DPHY phy mode.
  * @dp:		Configuration set applicable for phys supporting
  *		the DisplayPort protocol.
+ * @hdmi	Configuration set applicable for phys supporting
+ *		the HDMI protocol.
  */
 union phy_configure_opts {
 	struct phy_configure_opts_mipi_dphy	mipi_dphy;
 	struct phy_configure_opts_dp		dp;
+	struct phy_configure_opts_hdmi		hdmi;
 };
 
 /**
-- 
2.7.4