linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wolfgang Grandegger <wg@grandegger.com>
To: Dan Murphy <dmurphy@ti.com>, mkl@pengutronix.de, davem@davemloft.net
Cc: linux-can@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 1/5] can: m_can: Create a m_can platform framework
Date: Thu, 28 Feb 2019 21:12:43 +0100	[thread overview]
Message-ID: <d88ea2cb-10e3-9a4f-0c5c-d9eaccfeeada@grandegger.com> (raw)
In-Reply-To: <20190214182754.30721-2-dmurphy@ti.com>


Am 14.02.19 um 19:27 schrieb Dan Murphy:
> Create a m_can platform framework that peripherial
> devices can register to and use common code and register sets.
> The peripherial devices may provide read/write and configuration> support of the IP.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> 
> v5 - Created ops struct, renamed header to m_can.h, updated license and copyright
> added MODULE_AUTHOR and removed unneeded changes - https://lore.kernel.org/patchwork/patch/1033094/
> 
>  drivers/net/can/m_can/m_can.h          | 159 ++++++++++++++++++++
>  drivers/net/can/m_can/m_can_platform.c | 198 +++++++++++++++++++++++++
>  2 files changed, 357 insertions(+)
>  create mode 100644 drivers/net/can/m_can/m_can.h
>  create mode 100644 drivers/net/can/m_can/m_can_platform.c
> 
> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
> new file mode 100644
> index 000000000000..36b1b833d41b
> --- /dev/null
> +++ b/drivers/net/can/m_can/m_can.h
> @@ -0,0 +1,159 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#ifndef _CAN_M_CAN_H_
> +#define _CAN_M_CAN_H_
> +
> +#include <linux/can/core.h>
> +#include <linux/can/led.h>
> +#include <linux/completion.h>
> +#include <linux/device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/freezer.h>
> +#include <linux/slab.h>
> +#include <linux/uaccess.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/netdevice.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/iopoll.h>
> +#include <linux/can/dev.h>
> +#include <linux/pinctrl/consumer.h>
> +
> +/* m_can lec values */
> +enum m_can_lec_type {
> +	LEC_NO_ERROR = 0,
> +	LEC_STUFF_ERROR,
> +	LEC_FORM_ERROR,
> +	LEC_ACK_ERROR,
> +	LEC_BIT1_ERROR,
> +	LEC_BIT0_ERROR,
> +	LEC_CRC_ERROR,
> +	LEC_UNUSED,
> +};
> +
> +enum m_can_mram_cfg {
> +	MRAM_SIDF = 0,
> +	MRAM_XIDF,
> +	MRAM_RXF0,
> +	MRAM_RXF1,
> +	MRAM_RXB,
> +	MRAM_TXE,
> +	MRAM_TXB,
> +	MRAM_CFG_NUM,
> +};
> +
> +/* registers definition */
> +enum m_can_reg {
> +	M_CAN_CREL	= 0x0,
> +	M_CAN_ENDN	= 0x4,
> +	M_CAN_CUST	= 0x8,
> +	M_CAN_DBTP	= 0xc,
> +	M_CAN_TEST	= 0x10,
> +	M_CAN_RWD	= 0x14,
> +	M_CAN_CCCR	= 0x18,
> +	M_CAN_NBTP	= 0x1c,
> +	M_CAN_TSCC	= 0x20,
> +	M_CAN_TSCV	= 0x24,
> +	M_CAN_TOCC	= 0x28,
> +	M_CAN_TOCV	= 0x2c,
> +	M_CAN_ECR	= 0x40,
> +	M_CAN_PSR	= 0x44,
> +/* TDCR Register only available for version >=3.1.x */
> +	M_CAN_TDCR	= 0x48,
> +	M_CAN_IR	= 0x50,
> +	M_CAN_IE	= 0x54,
> +	M_CAN_ILS	= 0x58,
> +	M_CAN_ILE	= 0x5c,
> +	M_CAN_GFC	= 0x80,
> +	M_CAN_SIDFC	= 0x84,
> +	M_CAN_XIDFC	= 0x88,
> +	M_CAN_XIDAM	= 0x90,
> +	M_CAN_HPMS	= 0x94,
> +	M_CAN_NDAT1	= 0x98,
> +	M_CAN_NDAT2	= 0x9c,
> +	M_CAN_RXF0C	= 0xa0,
> +	M_CAN_RXF0S	= 0xa4,
> +	M_CAN_RXF0A	= 0xa8,
> +	M_CAN_RXBC	= 0xac,
> +	M_CAN_RXF1C	= 0xb0,
> +	M_CAN_RXF1S	= 0xb4,
> +	M_CAN_RXF1A	= 0xb8,
> +	M_CAN_RXESC	= 0xbc,
> +	M_CAN_TXBC	= 0xc0,
> +	M_CAN_TXFQS	= 0xc4,
> +	M_CAN_TXESC	= 0xc8,
> +	M_CAN_TXBRP	= 0xcc,
> +	M_CAN_TXBAR	= 0xd0,
> +	M_CAN_TXBCR	= 0xd4,
> +	M_CAN_TXBTO	= 0xd8,
> +	M_CAN_TXBCF	= 0xdc,
> +	M_CAN_TXBTIE	= 0xe0,
> +	M_CAN_TXBCIE	= 0xe4,
> +	M_CAN_TXEFC	= 0xf0,
> +	M_CAN_TXEFS	= 0xf4,
> +	M_CAN_TXEFA	= 0xf8,
> +};

You moved the register offsets here but not the register flags and
masks. Why?

> +/* address offset and element number for each FIFO/Buffer in the Message RAM */
> +struct mram_cfg {
> +	u16 off;
> +	u8  num;
> +};
> +
> +struct m_can_priv;
> +struct m_can_ops {
> +	/* Device specific call backs */
> +	int (*clr_dev_interrupts) (struct m_can_priv *m_can_class);
> +	u32 (*read_reg) (struct m_can_priv *m_can_class, int reg);
> +	int (*write_reg) (struct m_can_priv *m_can_class, int reg, int val);
> +	u32 (*read_fifo) (struct m_can_priv *m_can_class, int addr_offset);
> +	int (*write_fifo) (struct m_can_priv *m_can_class, int addr_offset, int val);
> +	int (*device_init) (struct m_can_priv *m_can_class);
> +};
> +
> +struct m_can_priv {
> +	struct can_priv can;
> +	struct napi_struct napi;
> +	struct net_device *net;
> +	struct device *dev;
> +	struct clk *hclk;
> +	struct clk *cclk;
> +
> +	struct workqueue_struct *wq;
> +	struct work_struct tx_work;
> +	struct sk_buff *skb;
> +
> +	struct can_bittiming_const *bit_timing;
> +	struct can_bittiming_const *data_timing;
> +
> +	struct m_can_ops *ops;
> +
> +	void *device_data;
> +
> +	int version;
> +	int freq;
> +	u32 irqstatus;
> +
> +	int pm_clock_support;
> +	bool is_peripherial;
> +
> +	struct mram_cfg mcfg[MRAM_CFG_NUM];
> +};
> +
> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev);
> +int m_can_class_register(struct m_can_priv *m_can_dev);
> +void m_can_class_unregister(struct m_can_priv *m_can_dev);
> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev);
> +void m_can_init_ram(struct m_can_priv *priv);
> +void m_can_config_endisable(struct m_can_priv *priv, bool enable);
> +
> +int m_can_class_suspend(struct device *dev);
> +int m_can_class_resume(struct device *dev);
> +#endif	/* _CAN_M_H_ */
> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
> new file mode 100644
> index 000000000000..d8d51bd64205
> --- /dev/null
> +++ b/drivers/net/can/m_can/m_can_platform.c
> @@ -0,0 +1,198 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// IOMapped CAN bus driver for Bosch M_CAN controller
> +// Copyright (C) 2014 Freescale Semiconductor, Inc.
> +//	Dong Aisheng <b29396@freescale.com>
> +//
> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#include <linux/platform_device.h>
> +
> +#include "m_can.h"
> +
> +struct m_can_plat_priv {
> +	void __iomem *base;
> +	void __iomem *mram_base;
> +};
> +
> +static u32 iomap_read_reg(struct m_can_priv *m_can_class, int reg)
> +{
> +	struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
> +
> +	return readl(priv->base + reg);
> +}
> +
> +static u32 iomap_read_fifo(struct m_can_priv *m_can_class, int offset)
> +{
> +	struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
> +
> +	return readl(priv->mram_base + offset);
> +}
> +
> +static int iomap_write_reg(struct m_can_priv *m_can_class, int reg, int val)
> +{
> +	struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
> +
> +	writel(val, priv->base + reg);
> +
> +	return 0;
> +}
> +
> +static int iomap_write_fifo(struct m_can_priv *m_can_class, int offset, int val)
> +{
> +	struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
> +
> +	writel(val, priv->mram_base + offset);
> +
> +	return 0;
> +}
> +
> +static struct m_can_ops m_can_plat_ops = {
> +	.read_reg = iomap_read_reg,
> +	.write_reg = iomap_write_reg,
> +	.write_fifo = iomap_write_fifo,
> +	.read_fifo = iomap_read_fifo,
> +};
> +
> +static int m_can_plat_probe(struct platform_device *pdev)
> +{
> +	struct m_can_priv *mcan_class;
> +	struct m_can_plat_priv *priv;
> +	struct resource *res;
> +	void __iomem *addr;
> +	void __iomem *mram_addr;
> +	int irq, ret = 0;
> +
> +	mcan_class = m_can_class_allocate_dev(&pdev->dev);
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	mcan_class->device_data = priv;
> +
> +	m_can_class_get_clocks(mcan_class);
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
> +	addr = devm_ioremap_resource(&pdev->dev, res);
> +	irq = platform_get_irq_byname(pdev, "int0");
> +	if (IS_ERR(addr) || irq < 0) {
> +		ret = -EINVAL;
> +		goto failed_ret;
> +	}
> +
> +	/* message ram could be shared */
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
> +	if (!res) {
> +		ret = -ENODEV;
> +		goto failed_ret;
> +	}
> +
> +	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
> +	if (!mram_addr) {
> +		ret = -ENOMEM;
> +		goto failed_ret;
> +	}
> +
> +	priv->base = addr;
> +	priv->mram_base = mram_addr;
> +
> +	mcan_class->net->irq = irq;
> +	mcan_class->pm_clock_support = 1;
> +	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
> +	mcan_class->dev = &pdev->dev;
> +
> +	mcan_class->ops = &m_can_plat_ops;
> +
> +	mcan_class->is_peripherial = false;
> +
> +	platform_set_drvdata(pdev, mcan_class->dev);
> +
> +	m_can_init_ram(mcan_class);
> +
> +	ret = m_can_class_register(mcan_class);
> +
> +failed_ret:
> +	return ret;
> +}
> +
> +static __maybe_unused int m_can_suspend(struct device *dev)
> +{
> +	return m_can_class_suspend(dev);
> +}
> +
> +static __maybe_unused int m_can_resume(struct device *dev)
> +{
> +	return m_can_class_resume(dev);
> +}
> +
> +static int m_can_plat_remove(struct platform_device *pdev)
> +{
> +	struct net_device *dev = platform_get_drvdata(pdev);
> +	struct m_can_priv *mcan_class = netdev_priv(dev);
> +
> +	m_can_class_unregister(mcan_class);
> +
> +	platform_set_drvdata(pdev, NULL);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused m_can_runtime_suspend(struct device *dev)
> +{
> +	struct net_device *ndev = dev_get_drvdata(dev);
> +	struct m_can_priv *mcan_class = netdev_priv(ndev);
> +
> +	m_can_class_suspend(dev);
> +
> +	clk_disable_unprepare(mcan_class->cclk);
> +	clk_disable_unprepare(mcan_class->hclk);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused m_can_runtime_resume(struct device *dev)
> +{
> +	struct net_device *ndev = dev_get_drvdata(dev);
> +	struct m_can_priv *mcan_class = netdev_priv(ndev);
> +	int err;
> +
> +	err = clk_prepare_enable(mcan_class->hclk);
> +	if (err)
> +		return err;
> +
> +	err = clk_prepare_enable(mcan_class->cclk);
> +	if (err)
> +		clk_disable_unprepare(mcan_class->hclk);
> +
> +	m_can_class_resume(dev);
> +
> +	return err;
> +}
> +
> +static const struct dev_pm_ops m_can_pmops = {
> +	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
> +			   m_can_runtime_resume, NULL)
> +	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
> +};
> +
> +static const struct of_device_id m_can_of_table[] = {
> +	{ .compatible = "bosch,m_can", .data = NULL },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, m_can_of_table);
> +
> +static struct platform_driver m_can_plat_driver = {
> +	.driver = {
> +		.name = KBUILD_MODNAME,
> +		.of_match_table = m_can_of_table,
> +		.pm     = &m_can_pmops,
> +	},
> +	.probe = m_can_plat_probe,
> +	.remove = m_can_plat_remove,
> +};
> +
> +module_platform_driver(m_can_plat_driver);
> +
> +MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");
> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller");

Please fix the description.

Wolfgang


  reply	other threads:[~2019-02-28 20:12 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-14 18:27 [PATCH v5 0/5] M_CAN Framework re-write Dan Murphy
2019-02-14 18:27 ` [PATCH v5 1/5] can: m_can: Create a m_can platform framework Dan Murphy
2019-02-28 20:12   ` Wolfgang Grandegger [this message]
2019-02-28 20:18     ` Dan Murphy
2019-02-14 18:27 ` [PATCH v5 2/5] can: m_can: Migrate the m_can code to use the framework Dan Murphy
2019-02-28 17:33   ` Wolfgang Grandegger
2019-02-28 17:57     ` Dan Murphy
2019-02-28 19:41       ` Wolfgang Grandegger
2019-02-28 19:59         ` Dan Murphy
2019-02-14 18:27 ` [PATCH v5 3/5] can: m_can: Rename m_can_priv to m_can_classdev Dan Murphy
2019-02-14 18:27 ` [PATCH v5 4/5] dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver Dan Murphy
2019-02-14 18:27 ` [PATCH v5 5/5] can: tcan4x5x: Add tcan4x5x driver to the kernel Dan Murphy
2019-02-28 17:50   ` Wolfgang Grandegger
2019-02-28 18:03     ` Dan Murphy
2019-02-28 20:07       ` Wolfgang Grandegger
2019-02-28 20:14         ` Dan Murphy
2019-02-21 16:24 ` [PATCH v5 0/5] M_CAN Framework re-write Dan Murphy
2019-02-21 16:41   ` Wolfgang Grandegger
2019-02-22  9:38     ` Wolfgang Grandegger
2019-02-22 12:50       ` Dan Murphy
2019-02-22 17:05         ` Dan Murphy
2019-02-24 11:27           ` Wolfgang Grandegger
2019-02-28 15:39             ` Dan Murphy
2019-02-28 16:40 ` Wolfgang Grandegger
2019-02-28 16:44   ` Dan Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d88ea2cb-10e3-9a4f-0c5c-d9eaccfeeada@grandegger.com \
    --to=wg@grandegger.com \
    --cc=davem@davemloft.net \
    --cc=dmurphy@ti.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --subject='Re: [PATCH v5 1/5] can: m_can: Create a m_can platform framework' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).