From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752390AbeEOHNk (ORCPT ); Tue, 15 May 2018 03:13:40 -0400 Received: from smtprelay6.synopsys.com ([198.182.37.59]:41327 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752054AbeEOHNg (ORCPT ); Tue, 15 May 2018 03:13:36 -0400 From: Gustavo Pimentel To: bhelgaas@google.com, lorenzo.pieralisi@arm.com, Joao.Pinto@synopsys.com, jingoohan1@gmail.com, kishon@ti.com, robh+dt@kernel.org, mark.rutland@arm.com Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Gustavo Pimentel Subject: [PATCH 1/4] bindings: PCI: designware: Example update Date: Tue, 15 May 2018 08:13:26 +0100 Message-Id: X-Mailer: git-send-email 2.7.4 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Replace "ctrlreg" reg-name by "dbi" to be coherent with similar drivers, however it still be compatible with any previous DT that uses the old reg-name. Replace the PCIe base address example by a real PCIe base address in use. Signed-off-by: Gustavo Pimentel Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/pci/designware-pcie.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 1da7ade..7f9804d 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -1,7 +1,8 @@ * Synopsys DesignWare PCIe interface Required properties: -- compatible: should contain "snps,dw-pcie" to identify the core. +- compatible: + "snps,dw-pcie" for RC mode; - reg: Should contain the configuration address space. - reg-names: Must be "config" for the PCIe configuration space. (The old way of getting the configuration address space from "ranges" @@ -41,11 +42,11 @@ EP mode: Example configuration: - pcie: pcie@dffff000 { + pcie: pcie@dfc00000 { compatible = "snps,dw-pcie"; - reg = <0xdffff000 0x1000>, /* Controller registers */ - <0xd0000000 0x2000>; /* PCI config space */ - reg-names = "ctrlreg", "config"; + reg = <0xdfc00000 0x0001000>, /* IP registers */ + <0xd0000000 0x0002000>; /* Configuration space */ + reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -54,5 +55,4 @@ Example configuration: interrupts = <25>, <24>; #interrupt-cells = <1>; num-lanes = <1>; - num-viewport = <3>; }; -- 2.7.4