[PATCH v15 0/3] Move HiSilicon 6421v600 SPMI and USB drivers out of staging

[PATCH v15 0/3] Move HiSilicon 6421v600 SPMI and USB drivers out of staging

[Mauro Carvalho Chehab]

Hi Greg,

Those are the remaining patches needed for USB3 to start working on HiKey 970.

I would prefer to have those merged during this cycle, as the PCIe patchset
currently under review depends on patch 1 and 2 of this series.

So, I dropped the cleanup patch from this series, due to a merge conflict with
the regulator's tree. I'll re-submit it against the mfd tree after the merge window. 

Mauro Carvalho Chehab (3):
  mfd: hi6421-spmi-pmic: move driver from staging
  dts: hisilicon: add support for the PMIC found on Hikey 970
  dts: hisilicon: add support for USB3 on Hikey 970

 .../mfd/hisilicon,hi6421-spmi-pmic.yaml       | 136 ++++++++++++++++++
 MAINTAINERS                                   |   7 +
 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 129 ++++++++++++++---
 arch/arm64/boot/dts/hisilicon/hi3670.dtsi     |  56 ++++++++
 .../boot/dts/hisilicon/hikey970-pmic.dtsi     |  86 +++++++++++
 drivers/mfd/Kconfig                           |  16 +++
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/hi6421-spmi-pmic.c                |  72 ++++++++++
 drivers/staging/Kconfig                       |   2 -
 drivers/staging/Makefile                      |   1 -
 drivers/staging/hikey9xx/Kconfig              |  19 ---
 drivers/staging/hikey9xx/Makefile             |   3 -
 drivers/staging/hikey9xx/TODO                 |   5 -
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c   |  72 ----------
 .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml  | 136 ------------------
 15 files changed, 484 insertions(+), 257 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
 create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
 create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
 delete mode 100644 drivers/staging/hikey9xx/Kconfig
 delete mode 100644 drivers/staging/hikey9xx/Makefile
 delete mode 100644 drivers/staging/hikey9xx/TODO
 delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
 delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml

-- 
2.31.1

[PATCH v15 1/3] mfd: hi6421-spmi-pmic: move driver from staging

[Mauro Carvalho Chehab]

This driver is ready for mainstream. So, move it out of staging.

Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../mfd/hisilicon,hi6421-spmi-pmic.yaml       | 136 ++++++++++++++++++
 MAINTAINERS                                   |   7 +
 drivers/mfd/Kconfig                           |  16 +++
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/hi6421-spmi-pmic.c                |  72 ++++++++++
 drivers/staging/Kconfig                       |   2 -
 drivers/staging/Makefile                      |   1 -
 drivers/staging/hikey9xx/Kconfig              |  19 ---
 drivers/staging/hikey9xx/Makefile             |   3 -
 drivers/staging/hikey9xx/TODO                 |   5 -
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c   |  72 ----------
 .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml  | 136 ------------------
 12 files changed, 232 insertions(+), 238 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
 create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
 delete mode 100644 drivers/staging/hikey9xx/Kconfig
 delete mode 100644 drivers/staging/hikey9xx/Makefile
 delete mode 100644 drivers/staging/hikey9xx/TODO
 delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
 delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml

diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
new file mode 100644
index 000000000000..cedf9d99a34b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
+  (SPMI) bus. It provides interrupts and power supply.
+
+  The GPIO and interrupt settings are represented as part of the top-level PMIC
+  node.
+
+  The SPMI controller part is provided by
+  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]"
+
+  compatible:
+    const: hisilicon,hi6421v600-spmi
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  interrupts: true
+
+  regulators:
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^(ldo|LDO)[0-9]+$':
+        type: object
+
+        $ref: "/schemas/regulator/regulator.yaml#"
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+
+    pmic: pmic@0 {
+      compatible = "hisilicon,hi6421v600-spmi";
+      reg = <0 0>;
+
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      interrupt-parent = <&gpio28>;
+      interrupts = <0 0>;
+
+      regulators {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ldo3: LDO3 {
+          regulator-name = "ldo3";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2000000>;
+          regulator-boot-on;
+        };
+
+        ldo4: LDO4 {
+          regulator-name = "ldo4";
+          regulator-min-microvolt = <1725000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-boot-on;
+        };
+
+        ldo9: LDO9 {
+          regulator-name = "ldo9";
+          regulator-min-microvolt = <1750000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo15: LDO15 {
+          regulator-name = "ldo15";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-always-on;
+        };
+
+        ldo16: LDO16 {
+          regulator-name = "ldo16";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-boot-on;
+        };
+
+        ldo17: LDO17 {
+          regulator-name = "ldo17";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+        };
+
+        ldo33: LDO33 {
+          regulator-name = "ldo33";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo34: LDO34 {
+          regulator-name = "ldo34";
+          regulator-min-microvolt = <2600000>;
+          regulator-max-microvolt = <3300000>;
+        };
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 672299764ec7..b54bd9dd07ec 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8432,6 +8432,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
 F:	drivers/spmi/hisi-spmi-controller.c
 
+HISILICON SPMI PMIC DRIVER FOR HIKEY 6421v600
+M:	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+F:	drivers/mfd/hi6421-spmi-pmic.c
+
 HISILICON STAGING DRIVERS FOR HIKEY 960/970
 M:	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
 S:	Maintained
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6a3fd2d75f96..01bb42f0ca0b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -510,6 +510,22 @@ config MFD_HI6421_PMIC
 	  menus in order to enable them.
 	  We communicate with the Hi6421 via memory-mapped I/O.
 
+config MFD_HI6421_SPMI
+	tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
+	depends on OF
+	depends on SPMI
+	select MFD_CORE
+	select REGMAP_SPMI
+	help
+	  Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
+	  multi-functions, such as regulators, RTC, codec, Coulomb counter,
+	  etc.
+
+	  This driver includes core APIs _only_. You have to select
+	  individual components like voltage regulators under corresponding
+	  menus in order to enable them.
+	  We communicate with the Hi6421v600 via a SPMI bus.
+
 config MFD_HI655X_PMIC
 	tristate "HiSilicon Hi655X series PMU/Codec IC"
 	depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8116c19d5fd4..570b9ffb34d0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -231,6 +231,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
 obj-$(CONFIG_MFD_IQS62X)	+= iqs62x.o
 obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
 obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI6421_SPMI)	+= hi6421-spmi-pmic.o
 obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655x-pmic.o
 obj-$(CONFIG_MFD_DLN2)		+= dln2.o
 obj-$(CONFIG_MFD_RT4831)	+= rt4831.o
diff --git a/drivers/mfd/hi6421-spmi-pmic.c b/drivers/mfd/hi6421-spmi-pmic.c
new file mode 100644
index 000000000000..4f136826681b
--- /dev/null
+++ b/drivers/mfd/hi6421-spmi-pmic.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for regulators in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+static const struct mfd_cell hi6421v600_devs[] = {
+	{ .name = "hi6421v600-irq", },
+	{ .name = "hi6421v600-regulator", },
+};
+
+static const struct regmap_config regmap_config = {
+	.reg_bits	= 16,
+	.val_bits	= BITS_PER_BYTE,
+	.max_register	= 0xffff,
+	.fast_io	= true
+};
+
+static int hi6421_spmi_pmic_probe(struct spmi_device *sdev)
+{
+	struct device *dev = &sdev->dev;
+	int ret;
+	struct hi6421_spmi_pmic *ddata;
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	ddata->regmap = devm_regmap_init_spmi_ext(sdev, &regmap_config);
+	if (IS_ERR(ddata->regmap))
+		return PTR_ERR(ddata->regmap);
+
+	ddata->dev = dev;
+
+	dev_set_drvdata(&sdev->dev, ddata);
+
+	ret = devm_mfd_add_devices(&sdev->dev, PLATFORM_DEVID_NONE,
+				   hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
+				   NULL, 0, NULL);
+	if (ret < 0)
+		dev_err(dev, "Failed to add child devices: %d\n", ret);
+
+	return ret;
+}
+
+static const struct of_device_id pmic_spmi_id_table[] = {
+	{ .compatible = "hisilicon,hi6421-spmi" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
+
+static struct spmi_driver hi6421_spmi_pmic_driver = {
+	.driver = {
+		.name	= "hi6421-spmi-pmic",
+		.of_match_table = pmic_spmi_id_table,
+	},
+	.probe	= hi6421_spmi_pmic_probe,
+};
+module_spmi_driver(hi6421_spmi_pmic_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index c8eaae6412bb..03ee99d98945 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -102,6 +102,4 @@ source "drivers/staging/qlge/Kconfig"
 
 source "drivers/staging/wfx/Kconfig"
 
-source "drivers/staging/hikey9xx/Kconfig"
-
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 818b6f964369..9a4c0e6f34d5 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -41,4 +41,3 @@ obj-$(CONFIG_XIL_AXIS_FIFO)	+= axis-fifo/
 obj-$(CONFIG_FIELDBUS_DEV)     += fieldbus/
 obj-$(CONFIG_QLGE)		+= qlge/
 obj-$(CONFIG_WFX)		+= wfx/
-obj-y				+= hikey9xx/
diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig
deleted file mode 100644
index 9f53df9068fe..000000000000
--- a/drivers/staging/hikey9xx/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# to be placed at drivers/mfd
-config MFD_HI6421_SPMI
-	tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
-	depends on HAS_IOMEM
-	depends on OF
-	depends on SPMI
-	select MFD_CORE
-	select REGMAP_SPMI
-	help
-	  Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
-	  multi-functions, such as regulators, RTC, codec, Coulomb counter,
-	  etc.
-
-	  This driver includes core APIs _only_. You have to select
-	  individual components like voltage regulators under corresponding
-	  menus in order to enable them.
-	  We communicate with the Hi6421v600 via a SPMI bus.
diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile
deleted file mode 100644
index e3108d7dd849..000000000000
--- a/drivers/staging/hikey9xx/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-obj-$(CONFIG_MFD_HI6421_SPMI)		+= hi6421-spmi-pmic.o
diff --git a/drivers/staging/hikey9xx/TODO b/drivers/staging/hikey9xx/TODO
deleted file mode 100644
index 65e7996a3066..000000000000
--- a/drivers/staging/hikey9xx/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-ToDo list:
-
-- Port other drivers needed by Hikey 960/970;
-- Test drivers on Hikey 960;
-- Validate device tree bindings.
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
deleted file mode 100644
index 4f136826681b..000000000000
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device driver for regulators in HISI PMIC IC
- *
- * Copyright (c) 2013 Linaro Ltd.
- * Copyright (c) 2011 Hisilicon.
- * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
- */
-
-#include <linux/mfd/core.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include <linux/spmi.h>
-
-static const struct mfd_cell hi6421v600_devs[] = {
-	{ .name = "hi6421v600-irq", },
-	{ .name = "hi6421v600-regulator", },
-};
-
-static const struct regmap_config regmap_config = {
-	.reg_bits	= 16,
-	.val_bits	= BITS_PER_BYTE,
-	.max_register	= 0xffff,
-	.fast_io	= true
-};
-
-static int hi6421_spmi_pmic_probe(struct spmi_device *sdev)
-{
-	struct device *dev = &sdev->dev;
-	int ret;
-	struct hi6421_spmi_pmic *ddata;
-	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	ddata->regmap = devm_regmap_init_spmi_ext(sdev, &regmap_config);
-	if (IS_ERR(ddata->regmap))
-		return PTR_ERR(ddata->regmap);
-
-	ddata->dev = dev;
-
-	dev_set_drvdata(&sdev->dev, ddata);
-
-	ret = devm_mfd_add_devices(&sdev->dev, PLATFORM_DEVID_NONE,
-				   hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
-				   NULL, 0, NULL);
-	if (ret < 0)
-		dev_err(dev, "Failed to add child devices: %d\n", ret);
-
-	return ret;
-}
-
-static const struct of_device_id pmic_spmi_id_table[] = {
-	{ .compatible = "hisilicon,hi6421-spmi" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
-
-static struct spmi_driver hi6421_spmi_pmic_driver = {
-	.driver = {
-		.name	= "hi6421-spmi-pmic",
-		.of_match_table = pmic_spmi_id_table,
-	},
-	.probe	= hi6421_spmi_pmic_probe,
-};
-module_spmi_driver(hi6421_spmi_pmic_driver);
-
-MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
deleted file mode 100644
index cedf9d99a34b..000000000000
--- a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
+++ /dev/null
@@ -1,136 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: HiSilicon 6421v600 SPMI PMIC
-
-maintainers:
-  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |
-  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
-  (SPMI) bus. It provides interrupts and power supply.
-
-  The GPIO and interrupt settings are represented as part of the top-level PMIC
-  node.
-
-  The SPMI controller part is provided by
-  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
-
-properties:
-  $nodename:
-    pattern: "pmic@[0-9a-f]"
-
-  compatible:
-    const: hisilicon,hi6421v600-spmi
-
-  reg:
-    maxItems: 1
-
-  '#interrupt-cells':
-    const: 2
-
-  interrupt-controller: true
-
-  interrupts: true
-
-  regulators:
-    type: object
-
-    additionalProperties: false
-
-    properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
-    patternProperties:
-      '^(ldo|LDO)[0-9]+$':
-        type: object
-
-        $ref: "/schemas/regulator/regulator.yaml#"
-
-        unevaluatedProperties: false
-
-required:
-  - compatible
-  - reg
-  - regulators
-
-additionalProperties: false
-
-examples:
-  - |
-
-    pmic: pmic@0 {
-      compatible = "hisilicon,hi6421v600-spmi";
-      reg = <0 0>;
-
-      #interrupt-cells = <2>;
-      interrupt-controller;
-      interrupt-parent = <&gpio28>;
-      interrupts = <0 0>;
-
-      regulators {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        ldo3: LDO3 {
-          regulator-name = "ldo3";
-          regulator-min-microvolt = <1500000>;
-          regulator-max-microvolt = <2000000>;
-          regulator-boot-on;
-        };
-
-        ldo4: LDO4 {
-          regulator-name = "ldo4";
-          regulator-min-microvolt = <1725000>;
-          regulator-max-microvolt = <1900000>;
-          regulator-boot-on;
-        };
-
-        ldo9: LDO9 {
-          regulator-name = "ldo9";
-          regulator-min-microvolt = <1750000>;
-          regulator-max-microvolt = <3300000>;
-          regulator-boot-on;
-        };
-
-        ldo15: LDO15 {
-          regulator-name = "ldo15";
-          regulator-min-microvolt = <1800000>;
-          regulator-max-microvolt = <3000000>;
-          regulator-always-on;
-        };
-
-        ldo16: LDO16 {
-          regulator-name = "ldo16";
-          regulator-min-microvolt = <1800000>;
-          regulator-max-microvolt = <3000000>;
-          regulator-boot-on;
-        };
-
-        ldo17: LDO17 {
-          regulator-name = "ldo17";
-          regulator-min-microvolt = <2500000>;
-          regulator-max-microvolt = <3300000>;
-        };
-
-        ldo33: LDO33 {
-          regulator-name = "ldo33";
-          regulator-min-microvolt = <2500000>;
-          regulator-max-microvolt = <3300000>;
-          regulator-boot-on;
-        };
-
-        ldo34: LDO34 {
-          regulator-name = "ldo34";
-          regulator-min-microvolt = <2600000>;
-          regulator-max-microvolt = <3300000>;
-        };
-      };
-    };
-- 
2.31.1

[PATCH v15 2/3] dts: hisilicon: add support for the PMIC found on Hikey 970

[Mauro Carvalho Chehab]

Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used
on HiKey970 board.

As we now have support for it, change the fixed regulators
used by the SD I/O to use the proper LDO supplies.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 22 +----
 .../boot/dts/hisilicon/hikey970-pmic.dtsi     | 86 +++++++++++++++++++
 2 files changed, 89 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi

diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index d8abf442ee7e..7c32f5fd5cc5 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -12,6 +12,7 @@
 
 #include "hi3670.dtsi"
 #include "hikey970-pinctrl.dtsi"
+#include "hikey970-pmic.dtsi"
 
 / {
 	model = "HiKey970";
@@ -39,23 +40,6 @@ memory@0 {
 		reg = <0x0 0x0 0x0 0x0>;
 	};
 
-	sd_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	sd_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
 	wlan_en: wlan-en-1-8v {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan-en-regulator";
@@ -402,8 +386,8 @@ &dwmmc1 {
 	pinctrl-0 = <&sd_pmx_func
 		     &sd_clk_cfg_func
 		     &sd_cfg_func>;
-	vmmc-supply = <&sd_3v3>;
-	vqmmc-supply = <&sd_1v8>;
+	vmmc-supply = <&ldo16>;
+	vqmmc-supply = <&ldo9>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
new file mode 100644
index 000000000000..03452e627641
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
+ *
+ * Copyright (C) 2020, Huawei Tech. Co., Ltd.
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	spmi: spmi@fff24000 {
+		compatible = "hisilicon,kirin970-spmi-controller";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		status = "okay";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
+		hisilicon,spmi-channel = <2>;
+
+		pmic: pmic@0 {
+			compatible = "hisilicon,hi6421-spmi";
+			reg = <0 SPMI_USID>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpios = <&gpio28 0 0>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ldo3: LDO3 { /* HDMI */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-boot-on;
+				};
+
+				ldo4: LDO4 { /* 40 PIN */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1725000>;
+					regulator-max-microvolt = <1900000>;
+					regulator-boot-on;
+				};
+
+				ldo9: LDO9 { /* SDCARD I/O */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1750000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo15: LDO15 { /* UFS */
+					regulator-name = "ldo15";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo16: LDO16 { /* SD */
+					regulator-name = "ldo16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldo17: LDO17 { /* USB HUB */
+					regulator-name = "ldo17";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo33: LDO33 { /* PEX8606 */
+					regulator-name = "ldo33";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo34: LDO34 { /* GPS AUX IN VDD */
+					regulator-name = "ldo34";
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <3300000>;
+				};
+			};
+		};
+	};
+};
-- 
2.31.1

[PATCH v15 3/3] dts: hisilicon: add support for USB3 on Hikey 970

[Mauro Carvalho Chehab]

Add the USB3 bindings for Kirin 970 phy and Hikey 970 board.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 107 ++++++++++++++++++
 arch/arm64/boot/dts/hisilicon/hi3670.dtsi     |  56 +++++++++
 2 files changed, 163 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 7c32f5fd5cc5..16f81f86e3fa 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -53,6 +53,30 @@ wlan_en: wlan-en-1-8v {
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
+
+	hikey_usbhub: hikey_usbhub {
+		compatible = "hisilicon,kirin970_hikey_usbhub";
+
+		typec-vbus-gpios = <&gpio26 1 0>;
+		otg-switch-gpios = <&gpio4 2 0>;
+		hub_reset_en_gpio = <&gpio0 3 0>;
+		hub-vdd-supply = <&ldo17>;
+		usb-role-switch;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+			hikey_usb_ep1: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&rt1711h_ep>;
+			};
+		};
+	};
 };
 
 /*
@@ -430,3 +454,86 @@ &uart6 {
 	label = "LS-UART1";
 	status = "okay";
 };
+
+&usb_phy {
+	phy-supply = <&ldo17>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	rt1711h: rt1711h@4e {
+		compatible = "richtek,rt1711h";
+		reg = <0x4e>;
+		status = "okay";
+		interrupt-parent = <&gpio27>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_cfg_func>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+				PDO_VAR(5000, 5000, 1000)>;
+			op-sink-microwatt = <10000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@1 {
+					reg = <1>;
+					usb_con_ss: endpoint {
+						remote-endpoint = <&dwc3_ss>;
+					};
+				};
+			};
+		};
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rt1711h_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hikey_usb_ep1>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* USB HUB is on this bus at address 0x44 */
+	status = "okay";
+};
+
+&dwc3 { /* USB */
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phy_type = "utmi";
+	snps,dis-del-phy-power-chg-quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,tx_de_emphasis_quirk;
+	snps,tx_de_emphasis = <1>;
+	snps,dis-split-quirk;
+	snps,gctl-reset-quirk;
+	usb-role-switch;
+	role-switch-default-mode = "host";
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dwc3_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&hikey_usb_ep0>;
+		};
+
+		dwc3_ss: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 20698cfd0637..1f228612192c 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/hi3670-clock.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	compatible = "hisilicon,hi3670";
@@ -785,5 +786,60 @@ i2c4: i2c@fdf0d000 {
 			pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>;
 			status = "disabled";
 		};
+
+		usb3_otg_bc: usb3_otg_bc@ff200000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+
+			usb_phy: usbphy {
+				compatible = "hisilicon,hi3670-usb-phy";
+				#phy-cells = <0>;
+				hisilicon,pericrg-syscon = <&crg_ctrl>;
+				hisilicon,pctrl-syscon = <&pctrl>;
+				hisilicon,sctrl-syscon = <&sctrl>;
+				hisilicon,eye-diagram-param = <0xFDFEE4>;
+				hisilicon,tx-vboost-lvl = <0x5>;
+			};
+		};
+
+		usb31_misc_rst: usb31_misc_rst_controller {
+			compatible = "hisilicon,hi3660-reset";
+			#reset-cells = <2>;
+			hisi,rst-syscon = <&usb3_otg_bc>;
+		};
+
+		usb3: hisi_dwc3 {
+			compatible = "hisilicon,hi3670-dwc3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&crg_ctrl HI3670_CLK_GATE_ABB_USB>,
+				  <&crg_ctrl HI3670_HCLK_GATE_USB3OTG>,
+				  <&crg_ctrl HI3670_CLK_GATE_USB3OTG_REF>,
+				  <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>;
+			clock-names = "clk_gate_abb_usb",
+				      "hclk_gate_usb3otg",
+				      "clk_gate_usb3otg_ref",
+				      "aclk_gate_usb3dvfs";
+
+			assigned-clocks = <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>;
+			assigned-clock-rates = <238000000>;
+			resets = <&crg_rst 0x90 6>,
+				 <&crg_rst 0x90 7>,
+				 <&usb31_misc_rst 0xA0 8>,
+				 <&usb31_misc_rst 0xA0 9>;
+
+			dwc3: usb@ff100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff100000 0x0 0x100000>;
+
+				interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>,
+					    <0 161 IRQ_TYPE_LEVEL_HIGH>;
+
+				phys = <&usb_phy>;
+				phy-names = "usb3-phy";
+			};
+		};
 	};
 };
-- 
2.31.1

Re: [PATCH v15 0/3] Move HiSilicon 6421v600 SPMI and USB drivers out of staging

[Greg Kroah-Hartman]

On Fri, Jul 23, 2021 at 09:40:05AM +0200, Mauro Carvalho Chehab wrote:
> Hi Greg,
> 
> Those are the remaining patches needed for USB3 to start working on HiKey 970.
> 
> I would prefer to have those merged during this cycle, as the PCIe patchset
> currently under review depends on patch 1 and 2 of this series.
> 
> So, I dropped the cleanup patch from this series, due to a merge conflict with
> the regulator's tree. I'll re-submit it against the mfd tree after the merge window. 
> 
> Mauro Carvalho Chehab (3):
>   mfd: hi6421-spmi-pmic: move driver from staging
>   dts: hisilicon: add support for the PMIC found on Hikey 970
>   dts: hisilicon: add support for USB3 on Hikey 970

I've applied patch 1 here.

The other two I need acks from the DT maintainers before I can do
anything with them.

thanks,

greg k-h

Re: [PATCH v15 1/3] mfd: hi6421-spmi-pmic: move driver from staging

[Rob Herring]

On Fri, Jul 23, 2021 at 09:40:06AM +0200, Mauro Carvalho Chehab wrote:
> This driver is ready for mainstream. So, move it out of staging.
> 
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../mfd/hisilicon,hi6421-spmi-pmic.yaml       | 136 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  drivers/mfd/Kconfig                           |  16 +++
>  drivers/mfd/Makefile                          |   1 +
>  drivers/mfd/hi6421-spmi-pmic.c                |  72 ++++++++++
>  drivers/staging/Kconfig                       |   2 -
>  drivers/staging/Makefile                      |   1 -
>  drivers/staging/hikey9xx/Kconfig              |  19 ---
>  drivers/staging/hikey9xx/Makefile             |   3 -
>  drivers/staging/hikey9xx/TODO                 |   5 -
>  drivers/staging/hikey9xx/hi6421-spmi-pmic.c   |  72 ----------
>  .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml  | 136 ------------------
>  12 files changed, 232 insertions(+), 238 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
>  create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
>  delete mode 100644 drivers/staging/hikey9xx/Kconfig
>  delete mode 100644 drivers/staging/hikey9xx/Makefile
>  delete mode 100644 drivers/staging/hikey9xx/TODO
>  delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
>  delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> new file mode 100644
> index 000000000000..cedf9d99a34b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> @@ -0,0 +1,136 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiSilicon 6421v600 SPMI PMIC
> +
> +maintainers:
> +  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> +
> +description: |
> +  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
> +  (SPMI) bus. It provides interrupts and power supply.
> +
> +  The GPIO and interrupt settings are represented as part of the top-level PMIC
> +  node.
> +
> +  The SPMI controller part is provided by
> +  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> +
> +properties:
> +  $nodename:
> +    pattern: "pmic@[0-9a-f]"
> +
> +  compatible:
> +    const: hisilicon,hi6421v600-spmi
> +
> +  reg:
> +    maxItems: 1
> +
> +  '#interrupt-cells':
> +    const: 2
> +
> +  interrupt-controller: true
> +
> +  interrupts: true

Need to define how many:

maxItems: 1

> +
> +  regulators:
> +    type: object
> +
> +    additionalProperties: false
> +
> +    properties:
> +      '#address-cells':
> +        const: 1
> +
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      '^(ldo|LDO)[0-9]+$':

Please decide between 'ldo' and 'LDO'. lowercase is preferred generally 
for node names, but whatever is easier. Labels are a don't care.

With those,

Reviewed-by: Rob Herring <robh@kernel.org> # DT binding


> +        type: object
> +
> +        $ref: "/schemas/regulator/regulator.yaml#"
> +
> +        unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - regulators
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +
> +    pmic: pmic@0 {
> +      compatible = "hisilicon,hi6421v600-spmi";
> +      reg = <0 0>;
> +
> +      #interrupt-cells = <2>;
> +      interrupt-controller;
> +      interrupt-parent = <&gpio28>;
> +      interrupts = <0 0>;
> +
> +      regulators {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ldo3: LDO3 {
> +          regulator-name = "ldo3";
> +          regulator-min-microvolt = <1500000>;
> +          regulator-max-microvolt = <2000000>;
> +          regulator-boot-on;
> +        };
> +
> +        ldo4: LDO4 {
> +          regulator-name = "ldo4";
> +          regulator-min-microvolt = <1725000>;
> +          regulator-max-microvolt = <1900000>;
> +          regulator-boot-on;
> +        };
> +
> +        ldo9: LDO9 {
> +          regulator-name = "ldo9";
> +          regulator-min-microvolt = <1750000>;
> +          regulator-max-microvolt = <3300000>;
> +          regulator-boot-on;
> +        };
> +
> +        ldo15: LDO15 {
> +          regulator-name = "ldo15";
> +          regulator-min-microvolt = <1800000>;
> +          regulator-max-microvolt = <3000000>;
> +          regulator-always-on;
> +        };
> +
> +        ldo16: LDO16 {
> +          regulator-name = "ldo16";
> +          regulator-min-microvolt = <1800000>;
> +          regulator-max-microvolt = <3000000>;
> +          regulator-boot-on;
> +        };
> +
> +        ldo17: LDO17 {
> +          regulator-name = "ldo17";
> +          regulator-min-microvolt = <2500000>;
> +          regulator-max-microvolt = <3300000>;
> +        };
> +
> +        ldo33: LDO33 {
> +          regulator-name = "ldo33";
> +          regulator-min-microvolt = <2500000>;
> +          regulator-max-microvolt = <3300000>;
> +          regulator-boot-on;
> +        };
> +
> +        ldo34: LDO34 {
> +          regulator-name = "ldo34";
> +          regulator-min-microvolt = <2600000>;
> +          regulator-max-microvolt = <3300000>;
> +        };
> +      };
> +    };

Re: [PATCH v15 0/3] Move HiSilicon 6421v600 SPMI and USB drivers out of staging

[Rob Herring]

On Fri, Jul 23, 2021 at 10:14:44AM +0200, Greg Kroah-Hartman wrote:
> On Fri, Jul 23, 2021 at 09:40:05AM +0200, Mauro Carvalho Chehab wrote:
> > Hi Greg,
> > 
> > Those are the remaining patches needed for USB3 to start working on HiKey 970.
> > 
> > I would prefer to have those merged during this cycle, as the PCIe patchset
> > currently under review depends on patch 1 and 2 of this series.
> > 
> > So, I dropped the cleanup patch from this series, due to a merge conflict with
> > the regulator's tree. I'll re-submit it against the mfd tree after the merge window. 
> > 
> > Mauro Carvalho Chehab (3):
> >   mfd: hi6421-spmi-pmic: move driver from staging
> >   dts: hisilicon: add support for the PMIC found on Hikey 970
> >   dts: hisilicon: add support for USB3 on Hikey 970
> 
> I've applied patch 1 here.
> 
> The other two I need acks from the DT maintainers before I can do
> anything with them.

I only review the bindings (patch 1). I can only deal with 1 firehose. 
The dts files should go thru the HiSilicon maintainers.

Rob