From: Ming Qian <ming.qian@nxp.com>
To: mchehab@kernel.org, shawnguo@kernel.org, robh+dt@kernel.org,
s.hauer@pengutronix.de
Cc: hverkuil-cisco@xs4all.nl, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com, aisheng.dong@nxp.com,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] dt-bindings: media: imx8q: add imx video codec bindings
Date: Mon, 31 May 2021 10:51:09 +0800 [thread overview]
Message-ID: <dd2c66ba07a8025da2c377c1b6e46f9d7304c9bc.1622429026.git.ming.qian@nxp.com> (raw)
In-Reply-To: <cover.1622429025.git.ming.qian@nxp.com>
Add devicetree binding documentation for IMX8Q Video Processing Unit IP
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
---
.../bindings/media/nxp,imx8q-vpu.yaml | 201 ++++++++++++++++++
1 file changed, 201 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml
new file mode 100644
index 000000000000..97e428dbfdbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8q-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8Q video encode and decode accelerators
+
+maintainers:
+ - ming_qian <ming.qian@nxp.com>
+ - Shijie Qin <shijie.qin@nxp.com>
+
+description: |-
+ The Amphion MXC video encode and decode accelerators present on NXP i.MX8Q SoCs.
+
+allOf:
+ - $ref: /schemas/simple-bus.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - nxp,imx8qxp-vpu
+ - nxp,imx8qm-vpu
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ memory-region:
+ description:
+ Phandle to a node describing reserved memory used by VPU.
+ (see bindings/reserved-memory/reserved-memory.txt)
+
+ vpu_lpcg:
+ description:
+ This is vpu Low-Power Clock Gate (LPCG) module.
+
+ mu_m0:
+ description:
+ Each vpu core correspond a MU node, which used for communication between
+ driver and firmware. Implement via mailbox on driver.
+
+ vpu_core:
+ type: object
+ additionalProperties: false
+ description:
+ Each core correspond a decoder or encoder, need to configure them
+ separately.
+
+ properties:
+ compatible:
+ oneOf:
+ - const: nxp,imx8q-vpu-decoder
+ - const: nxp,imx8q-vpu-encoder
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ mbox-names:
+ - const: tx0
+ - const: tx1
+ - const: rx
+
+ mboxes:
+ maxItems: 3
+ description:
+ List of phandle of 2 MU channels for tx, 1 MU channel for rx.
+
+ boot-region:
+ description:
+ Phandle to a node describing reserved memory used by firmware
+ loading.
+
+ rpc-region:
+ description:
+ Phandle to a node describing reserved memory used by RPC shared
+ memory between firmware and driver.
+
+ print-offset:
+ description:
+ The memory offset from RPC address, used by reserve firmware log.
+
+ id:
+ description: Index of vpu core.
+
+ required:
+ - compatible
+ - reg
+ - power-domains
+ - mbox-names
+ - mboxes
+ - boot-region
+ - rpc-region
+ - print-offset
+ - id
+
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - memory-region
+ - vpu_lpcg
+ - mu_m0
+ - vpu_core
+
+examples:
+ # Device node example for i.MX8QM platform:
+ - |
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ vpu: vpu-bus@2c000000 {
+ compatible = "nxp,imx8qm-vpu", "simple-bus";
+ ranges = <0x2c000000 0x2c000000 0x2000000>;
+ reg = <0x2c000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&pd IMX_SC_R_VPU>;
+ memory-region = <&vpu_reserved>;
+
+ vpu_lpcg: clock-controller@2c000000 {
+ compatible = "fsl,imx8qxp-lpcg-vpu";
+ reg = <0x2c000000 0x2000000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
+ mu_m0: mailbox@2d000000 {
+ compatible = "fsl,imx6sx-mu";
+ reg = <0x2d000000 0x20000>;
+ interrupts = <0 472 4>;
+ #mbox-cells = <2>;
+ power-domains = <&pd IMX_SC_R_VPU_MU_0>;
+ };
+
+ mu1_m0: mailbox@2d020000 {
+ compatible = "fsl,imx6sx-mu";
+ reg = <0x2d020000 0x20000>;
+ interrupts = <0 473 4>;
+ #mbox-cells = <2>;
+ power-domains = <&pd IMX_SC_R_VPU_MU_1>;
+ };
+
+ mu2_m0: mailbox@2d040000 {
+ compatible = "fsl,imx6sx-mu";
+ reg = <0x2d040000 0x20000>;
+ interrupts = <0 474 4>;
+ #mbox-cells = <2>;
+ power-domains = <&pd IMX_SC_R_VPU_MU_2>;
+ };
+
+ vpu_core0: vpu_decoder@2d080000 {
+ compatible = "nxp,imx8q-vpu-decoder";
+ reg = <0x2d080000 0x10000>;
+ power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
+ mbox-names = "tx0", "tx1", "rx";
+ mboxes = <&mu_m0 0 0
+ &mu_m0 0 1
+ &mu_m0 1 0>;
+ boot-region = <&decoder_boot>;
+ rpc-region = <&decoder_rpc>;
+ print-offset = <0x180000>;
+ id = <0>;
+ };
+
+ vpu_core1: vpu_encoder@2d090000 {
+ compatible = "nxp,imx8q-vpu-encoder";
+ reg = <0x2d090000 0x10000>;
+ power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
+ mbox-names = "tx0", "tx1", "rx";
+ mboxes = <&mu1_m0 0 0
+ &mu1_m0 0 1
+ &mu1_m0 1 0>;
+ boot-region = <&encoder1_boot>;
+ rpc-region = <&encoder1_rpc>;
+ print-offset = <0x80000>;
+ id = <1>;
+ };
+
+ vpu_core2: vpu_encoder@2d0a0000 {
+ reg = <0x2d0a0000 0x10000>;
+ compatible = "nxp,imx8q-vpu-encoder";
+ power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
+ mbox-names = "tx0", "tx1", "rx";
+ mboxes = <&mu2_m0 0 0
+ &mu2_m0 0 1
+ &mu2_m0 1 0>;
+ boot-region = <&encoder2_boot>;
+ rpc-region = <&encoder2_rpc>;
+ id = <2>;
+ };
+ };
+
+...
--
2.31.1
next prev parent reply other threads:[~2021-05-31 2:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-31 2:51 [PATCH 0/5] imx8q video decoder/encoder driver Ming Qian
2021-05-31 2:51 ` Ming Qian [this message]
2021-05-31 14:43 ` [PATCH 1/5] dt-bindings: media: imx8q: add imx video codec bindings Nicolas Dufresne
2021-06-01 1:48 ` [EXT] " Ming Qian
2021-06-01 13:32 ` Rob Herring
2021-06-02 8:09 ` [EXT] " Ming Qian
2021-05-31 2:51 ` [PATCH 2/5] media: v4l: add some definition of v4l2 colorspace/xfer_func/ycbcr_encoding Ming Qian
2021-05-31 2:51 ` [PATCH 3/5] media: imx: imx8q: add v4l2 m2m video codec driver Ming Qian
2021-05-31 2:51 ` [PATCH 4/5] ARM64: dts: freescale: imx8q: add imx vpu codec entries Ming Qian
2021-05-31 2:51 ` [PATCH 5/5] firmware: imx: scu-pd: imx8q: add vpu mu resources Ming Qian
2021-07-20 14:48 ` [PATCH 0/5] imx8q video decoder/encoder driver Nicolas Dufresne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dd2c66ba07a8025da2c377c1b6e46f9d7304c9bc.1622429026.git.ming.qian@nxp.com \
--to=ming.qian@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).