From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752618AbdDHRXY (ORCPT ); Sat, 8 Apr 2017 13:23:24 -0400 Received: from saturn.retrosnub.co.uk ([178.18.118.26]:38522 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751626AbdDHRXS (ORCPT ); Sat, 8 Apr 2017 13:23:18 -0400 Subject: Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes To: Benjamin Gaignard References: <1490607804-24889-1-git-send-email-benjamin.gaignard@st.com> <1490607804-24889-3-git-send-email-benjamin.gaignard@st.com> <3553cca5-0097-000e-40e0-934ef0dca776@kernel.org> <72583ad3-de0c-ab51-66f4-769687273a15@kernel.org> Cc: Linux Kernel Mailing List , linux-iio@vger.kernel.org, Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , William Breathitt Gray , mwelling@ieee.org, Fabrice Gasnier , Linaro Kernel Mailman List , Benjamin Gaignard From: Jonathan Cameron Message-ID: Date: Sat, 8 Apr 2017 18:23:16 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.8.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 04/04/17 08:37, Benjamin Gaignard wrote: > 2017-04-03 21:58 GMT+02:00 Jonathan Cameron : >> On 03/04/17 11:17, Benjamin Gaignard wrote: >>> 2017-04-02 13:12 GMT+02:00 Jonathan Cameron : >>>> On 27/03/17 10:43, Benjamin Gaignard wrote: >>>>> Device counting could be controlled by the level or the edges of >>>>> a trigger. >>>>> in_count0_enable_mode attibute allow to set the control mode. >>>>> >>>>> Signed-off-by: Benjamin Gaignard >>>>> --- >>>>> .../ABI/testing/sysfs-bus-iio-timer-stm32 | 23 +++++++ >>>>> drivers/iio/trigger/stm32-timer-trigger.c | 70 ++++++++++++++++++++++ >>>>> 2 files changed, 93 insertions(+) >>>>> >>>>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 >>>>> index bf795ad..c0a1edc 100644 >>>>> --- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 >>>>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 >>>>> @@ -59,3 +59,26 @@ Description: >>>>> quadrature: >>>>> Encoder A and B inputs are mixed to get direction >>>>> and count with a scale of 0.25. >>>>> + >>>>> +What: /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available >>>>> +KernelVersion: 4.12 >>>>> +Contact: benjamin.gaignard@st.com >>>>> +Description: >>>>> + Reading returns the list possible enable modes. >>>>> + >>>>> +What: /sys/bus/iio/devices/iio:deviceX/in_count0_enable_mode >>>>> +KernelVersion: 4.12 >>>>> +Contact: benjamin.gaignard@st.com >>>>> +Description: >>>>> + Configure the device counter enable modes, in all case >>>>> + counting direction is set by in_count0_count_direction >>>>> + attribute and the counter is clocked by the internal clock. >>>> Silly question, how does one use the encoder modes then? >>> >>> When setting an encoder mode internal counter is enabled no need to touch to >>> in_count0_enable_mode in those cases >> So in that case it's ignored? >> I'd be tempted to change the docs to drop the fact it is an internal clock. >> However you'll also need to ensure that when an encoder mode is selected >> this attribute will always read 'always'. I think that ends up consistent.. > > The counter could be drive (i.e counting up/down) by 3 type of source: > - the internal clock with 3 modes "always", "gated" and "triggered" > - the encoder input egdes and levels: 3 modes "channel_A", "channel_B" > and "quadrature" > - the rising egdes of a connected trigger which is an internal signal > (for a later patch) > > For each counter "source" I have an attribute but in the hardware they > are exclusive. > For example set "quadrature" means that the counter is counting on the edges of > encoder inputs and no more on the rising edges of the internal clock. > > I would like to keep this representing the hardware status so if an > encoder mode is > selected in_count0_enable_mode will return -EINVAL. Cool. As long as there is a valid path between modes that's an acceptable option. > >> >> Also there will be other devices that do these gating and triggering etc but >> will do it even when fed by an encoder. >> >> Jonathan >>> >>>> >>>>> + always: >>>>> + Counter is always ON. >>>>> + >>>>> + gated: >>>>> + Counting is enabled when connected trigger signal >>>>> + level is high else counting is disabled. >>>>> + >>>>> + triggered: >>>>> + Counting start on rising edge of the connected trigger. >>>> >>>> >>>>> diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c >>>>> index 7db904c..0f1a2cf 100644 >>>>> --- a/drivers/iio/trigger/stm32-timer-trigger.c >>>>> +++ b/drivers/iio/trigger/stm32-timer-trigger.c >>>>> @@ -353,6 +353,74 @@ static int stm32_counter_write_raw(struct iio_dev *indio_dev, >>>>> .write_raw = stm32_counter_write_raw >>>>> }; >>>>> >>>>> +static const char *const stm32_enable_modes[] = { >>>>> + "always", >>>>> + "gated", >>>>> + "triggered", >>>>> +}; >>>>> + >>>>> +static int stm32_enable_mode2sms(int mode) >>>>> +{ >>>>> + switch (mode) { >>>>> + case 0: >>>>> + return 0; >>>>> + case 1: >>>>> + return 5; >>>>> + case 2: >>>>> + return 6; >>>>> + } >>>>> + >>>>> + return -EINVAL; >>>>> +} >>>>> + >>>>> +static int stm32_set_enable_mode(struct iio_dev *indio_dev, >>>>> + const struct iio_chan_spec *chan, >>>>> + unsigned int mode) >>>>> +{ >>>>> + struct stm32_timer_trigger *priv = iio_priv(indio_dev); >>>>> + int sms = stm32_enable_mode2sms(mode); >>>>> + >>>>> + if (sms < 0) >>>>> + return sms; >>>>> + >>>>> + regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms); >>>>> + >>>>> + return 0; >>>>> +} >>>>> + >>>>> +static int stm32_sms2enable_mode(int mode) >>>>> +{ >>>>> + switch (mode) { >>>>> + case 0: >>>>> + return 0; >>>>> + case 5: >>>>> + return 1; >>>>> + case 6: >>>>> + return 2; >>>>> + } >>>>> + >>>>> + return -EINVAL; >>>>> +} >>>>> + >>>>> +static int stm32_get_enable_mode(struct iio_dev *indio_dev, >>>>> + const struct iio_chan_spec *chan) >>>>> +{ >>>>> + struct stm32_timer_trigger *priv = iio_priv(indio_dev); >>>>> + u32 smcr; >>>>> + >>>>> + regmap_read(priv->regmap, TIM_SMCR, &smcr); >>>>> + smcr &= TIM_SMCR_SMS; >>>>> + >>>>> + return stm32_sms2enable_mode(smcr); >>>>> +} >>>>> + >>>>> +static const struct iio_enum stm32_enable_mode_enum = { >>>>> + .items = stm32_enable_modes, >>>>> + .num_items = ARRAY_SIZE(stm32_enable_modes), >>>>> + .set = stm32_set_enable_mode, >>>>> + .get = stm32_get_enable_mode >>>>> +}; >>>>> + >>>>> static const char *const stm32_quadrature_modes[] = { >>>>> "channel_A", >>>>> "channel_B", >>>>> @@ -466,6 +534,8 @@ static ssize_t stm32_count_set_preset(struct iio_dev *indio_dev, >>>>> IIO_ENUM_AVAILABLE("count_direction", &stm32_count_direction_enum), >>>>> IIO_ENUM("quadrature_mode", IIO_SEPARATE, &stm32_quadrature_mode_enum), >>>>> IIO_ENUM_AVAILABLE("quadrature_mode", &stm32_quadrature_mode_enum), >>>>> + IIO_ENUM("enable_mode", IIO_SEPARATE, &stm32_enable_mode_enum), >>>>> + IIO_ENUM_AVAILABLE("enable_mode", &stm32_enable_mode_enum), >>>>> {} >>>>> }; >>>>> >>>>> >>>> >>> >>> >>> >> > > >