linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bastien Nocera <hadess@hadess.net>
To: Siarhei Vishniakou <svv@google.com>,
	Jiri Kosina <jikos@kernel.org>,
	Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] Add rumble support to latest xbox controllers
Date: Wed, 08 Mar 2023 11:22:58 +0100	[thread overview]
Message-ID: <df8538e8a97cb4547db7da51a4359c03657ab79f.camel@hadess.net> (raw)
In-Reply-To: <20230307213536.2299487-1-svv@google.com>

On Tue, 2023-03-07 at 13:35 -0800, Siarhei Vishniakou wrote:
> Currently, rumble is only supported via bluetooth on a single xbox
> controller, called 'model 1708'. On the back of the device, it's
> named
> 'wireless controller for xbox one'. However, in 2021, Microsoft
> released
> a firmware update for this controller. As part of this update, the
> HID
> descriptor of the device changed. The product ID was also changed
> from
> 0x02fd to 0x0b20. On this controller, rumble was supported via
> hid-microsoft, which matched against the old product id (0x02fd). As
> a
> result, the firmware update broke rumble support on this controller.
> 
> The hid-microsoft driver actually supports rumble on the new
> firmware,
> as well. So simply adding new product id is sufficient to bring back
> this support.
> 
> After discussing further with the xbox team, it was pointed out that
> another xbox controller, xbox elite series 2, can be supported in a
> similar way.
> 
> Add rumble support for all of these devices in this patch. Two of the
> devices have received firmware updates that caused their product id's
> to
> change. Both old and new firmware versions of these devices were
> tested.
> 
> The tested controllers are:
> 
> 1. 'wireless controller for xbox one', model 1708
> 2. 'xbox wireless controller', model 1914. This is also sometimes
>    referred to as 'xbox series S|X'.
> 3. 'elite series 2', model 1797.
> 
> The tested configurations are:
> 1. model 1708, pid 0x02fd (old firmware)
> 2. model 1708, pid 0x0b20 (new firmware)
> 3. model 1914, pid 0x0b13
> 4. model 1797, pid 0x0b05 (old firmware)
> 5. model 1797, pid 0x0b22 (new firmware)
> 
> I verified rumble support on both bluetooth and usb.

Looks good although I would personally have preferred separate patches
for each controller.

Reviewed-by: Bastien Nocera <hadess@hadess.net>

Would a link to:
https://en.wikipedia.org/wiki/Xbox_Wireless_Controller#Summary
also be useful to make which model is which clearer in the minds of
future readers?

Cheers

> 
> Signed-off-by: Siarhei Vishniakou <svv@google.com>
> Change-Id: I3337a7ab5f40759c85bf67bf0dbe5d4de31ce1ff
> ---
>  drivers/hid/hid-ids.h       |  6 +++++-
>  drivers/hid/hid-microsoft.c | 11 ++++++++++-
>  2 files changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 053853a891c5..c9b75f8ba49a 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -903,7 +903,11 @@
>  #define USB_DEVICE_ID_MS_TYPE_COVER_2    0x07a9
>  #define USB_DEVICE_ID_MS_POWER_COVER     0x07da
>  #define USB_DEVICE_ID_MS_SURFACE3_COVER                0x07de
> -#define USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER 0x02fd
> +#define USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1708    0x02fd
> +#define
> USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1708_BLE        0x0b20
> +#define USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1914    0x0b13
> +#define USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1797    0x0b05
> +#define
> USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1797_BLE        0x0b22
>  #define USB_DEVICE_ID_MS_PIXART_MOUSE    0x00cb
>  #define USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS      0x02e0
>  
> diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-
> microsoft.c
> index 071fd093a5f4..9345e2bfd56e 100644
> --- a/drivers/hid/hid-microsoft.c
> +++ b/drivers/hid/hid-microsoft.c
> @@ -446,7 +446,16 @@ static const struct hid_device_id ms_devices[] =
> {
>                 .driver_data = MS_PRESENTER },
>         { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, 0x091B),
>                 .driver_data = MS_SURFACE_DIAL },
> -       { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER),
> +
> +       { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1708),
> +               .driver_data = MS_QUIRK_FF },
> +       { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1708_BLE),
> +               .driver_data = MS_QUIRK_FF },
> +       { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1914),
> +               .driver_data = MS_QUIRK_FF },
> +       { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1797),
> +               .driver_data = MS_QUIRK_FF },
> +       { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1797_BLE),
>                 .driver_data = MS_QUIRK_FF },
>         { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS),
>                 .driver_data = MS_QUIRK_FF },


  reply	other threads:[~2023-03-08 10:23 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-07 21:35 [PATCH v2] Add rumble support to latest xbox controllers Siarhei Vishniakou
2023-03-08 10:22 ` Bastien Nocera [this message]
2023-03-08 17:55   ` Siarhei Vishniakou
2023-03-08 18:54     ` Bastien Nocera
2023-03-09 14:56       ` Benjamin Tissoires
2023-04-25  1:07         ` Siarhei Vishniakou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=df8538e8a97cb4547db7da51a4359c03657ab79f.camel@hadess.net \
    --to=hadess@hadess.net \
    --cc=benjamin.tissoires@redhat.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=svv@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).