From: Heiner Kallweit <hkallweit1@gmail.com>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>, davem@davemloft.net
Cc: hayeswang@realtek.com, romieu@fr.zoreil.com,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Ryankao <ryankao@realtek.com>
Subject: Re: [PATCH] r8169: Reinstate ALDPS and ASPM support
Date: Tue, 5 Jun 2018 21:13:08 +0200 [thread overview]
Message-ID: <dfd3a9b4-3f89-9849-8d71-6fc49374b1df@gmail.com> (raw)
In-Reply-To: <20180605045812.17977-1-kai.heng.feng@canonical.com>
On 05.06.2018 06:58, Kai-Heng Feng wrote:
> This patch reinstate ALDPS and ASPM support on r8169.
>
> On some Intel platforms, ASPM support on r8169 is the key factor to let
> Package C-State achieve PC8. Without ASPM support, the deepest Package
> C-State can hit is PC3. PC8 can save additional ~3W in comparison with
> PC3.
>
> This patch is from Realtek.
>
> Fixes: e0c075577965 ("r8169: enable ALDPS for power saving")
> Fixes: d64ec841517a ("r8169: enable internal ASPM and clock request settings")
>
> Cc: Ryankao <ryankao@realtek.com>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> drivers/net/ethernet/realtek/r8169.c | 190 +++++++++++++++++++++------
> 1 file changed, 151 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
> index 75dfac0248f4..a28ef20be221 100644
> --- a/drivers/net/ethernet/realtek/r8169.c
> +++ b/drivers/net/ethernet/realtek/r8169.c
> @@ -319,6 +319,8 @@ static const struct pci_device_id rtl8169_pci_tbl[] = {
>
> MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl);
>
> +static int enable_aspm = 1;
> +static int enable_aldps = 1;
> static int use_dac = -1;
> static struct {
> u32 msg_enable;
> @@ -817,6 +819,10 @@ struct rtl8169_private {
>
> MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
> MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
> +module_param(enable_aspm, int, 0);
> +MODULE_PARM_DESC(enable_aspm, "Enable ASPM");
> +module_param(enable_aldps, int, 0);
> +MODULE_PARM_DESC(enable_aldps, "Enable ALDPS");
> module_param(use_dac, int, 0);
> MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot.");
> module_param_named(debug, debug.msg_enable, int, 0);
> @@ -1567,25 +1573,6 @@ static void rtl_link_chg_patch(struct rtl8169_private *tp)
> }
> }
>
> -static void rtl8169_check_link_status(struct net_device *dev,
> - struct rtl8169_private *tp)
> -{
> - struct device *d = tp_to_dev(tp);
> -
> - if (tp->link_ok(tp)) {
> - rtl_link_chg_patch(tp);
> - /* This is to cancel a scheduled suspend if there's one. */
> - pm_request_resume(d);
> - netif_carrier_on(dev);
> - if (net_ratelimit())
> - netif_info(tp, ifup, dev, "link up\n");
> - } else {
> - netif_carrier_off(dev);
> - netif_info(tp, ifdown, dev, "link down\n");
> - pm_runtime_idle(d);
> - }
> -}
> -
> #define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
>
> static u32 __rtl8169_get_wol(struct rtl8169_private *tp)
> @@ -3520,6 +3507,15 @@ static void rtl8168e_1_hw_phy_config(struct rtl8169_private *tp)
> rtl_writephy(tp, 0x0d, 0x4007);
> rtl_writephy(tp, 0x0e, 0x0000);
> rtl_writephy(tp, 0x0d, 0x0000);
> +
> + /* Check ALDPS bit, disable it if enabled */
> + rtl_writephy(tp, 0x1f, 0x0000);
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x15, 0x1000, 0x0000);
> + else if (rtl_readphy(tp, 0x15) & 0x1000)
> + rtl_w0w1_phy(tp, 0x15, 0x0000, 0x1000);
> +
> + rtl_writephy(tp, 0x1f, 0x0000);
Few remarks:
- The comment isn't applicable any longer.
- The second rtl_writephy(tp, 0x1f, 0x0000) isn't needed because you don't
switch the page in between.
- The code is a little hard to read, instead you could use the following
and create a helper, ideally with register and bit number as
parameters so that you can use it for all affected chip types.
val = rtl_readphy(tp, 0x15);
val &= ~BIT(12);
if (enable_aldps)
val |= BIT(12);
rtl_writephy(tp, 0x15, val);
> }
>
> static void rtl_rar_exgmac_set(struct rtl8169_private *tp, u8 *addr)
> @@ -3627,6 +3623,15 @@ static void rtl8168e_2_hw_phy_config(struct rtl8169_private *tp)
>
> /* Broken BIOS workaround: feed GigaMAC registers with MAC address. */
> rtl_rar_exgmac_set(tp, tp->dev->dev_addr);
> +
> + /* Check ALDPS bit, disable it if enabled */
> + rtl_writephy(tp, 0x1f, 0x0000);
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x15, 0x1000, 0x0000);
> + else if (rtl_readphy(tp, 0x15) & 0x1000)
> + rtl_w0w1_phy(tp, 0x15, 0x0000, 0x1000);
> +
> + rtl_writephy(tp, 0x1f, 0x0000);
> }
>
> static void rtl8168f_hw_phy_config(struct rtl8169_private *tp)
> @@ -3649,6 +3654,15 @@ static void rtl8168f_hw_phy_config(struct rtl8169_private *tp)
> rtl_writephy(tp, 0x05, 0x8b86);
> rtl_w0w1_phy(tp, 0x06, 0x0001, 0x0000);
> rtl_writephy(tp, 0x1f, 0x0000);
> +
> + /* Check ALDPS bit, disable it if enabled */
> + rtl_writephy(tp, 0x1f, 0x0000);
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x15, 0x1000, 0x0000);
> + else if (rtl_readphy(tp, 0x15) & 0x1000)
> + rtl_w0w1_phy(tp, 0x15, 0x0000, 0x1000);
> +
> + rtl_writephy(tp, 0x1f, 0x0000);
> }
>
> static void rtl8168f_1_hw_phy_config(struct rtl8169_private *tp)
> @@ -3865,7 +3879,9 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp)
>
> /* Check ALDPS bit, disable it if enabled */
> rtl_writephy(tp, 0x1f, 0x0a43);
> - if (rtl_readphy(tp, 0x10) & 0x0004)
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x10, 0x0004, 0x0000);
> + else if (rtl_readphy(tp, 0x10) & 0x0004)
> rtl_w0w1_phy(tp, 0x10, 0x0000, 0x0004);
>
> rtl_writephy(tp, 0x1f, 0x0000);
> @@ -3874,6 +3890,14 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp)
> static void rtl8168g_2_hw_phy_config(struct rtl8169_private *tp)
> {
> rtl_apply_firmware(tp);
> +
> + rtl_writephy(tp, 0x1f, 0x0a43);
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x10, 0x0004, 0x0000);
> + else if (rtl_readphy(tp, 0x10) & 0x0004)
> + rtl_w0w1_phy(tp, 0x10, 0x0000, 0x0004);
> +
> + rtl_writephy(tp, 0x1f, 0x0000);
> }
>
> static void rtl8168h_1_hw_phy_config(struct rtl8169_private *tp)
> @@ -3980,7 +4004,9 @@ static void rtl8168h_1_hw_phy_config(struct rtl8169_private *tp)
>
> /* Check ALDPS bit, disable it if enabled */
> rtl_writephy(tp, 0x1f, 0x0a43);
> - if (rtl_readphy(tp, 0x10) & 0x0004)
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x10, 0x0004, 0x0000);
> + else if (rtl_readphy(tp, 0x10) & 0x0004)
> rtl_w0w1_phy(tp, 0x10, 0x0000, 0x0004);
>
> rtl_writephy(tp, 0x1f, 0x0000);
> @@ -4053,7 +4079,9 @@ static void rtl8168h_2_hw_phy_config(struct rtl8169_private *tp)
>
> /* Check ALDPS bit, disable it if enabled */
> rtl_writephy(tp, 0x1f, 0x0a43);
> - if (rtl_readphy(tp, 0x10) & 0x0004)
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x10, 0x0004, 0x0000);
> + else if (rtl_readphy(tp, 0x10) & 0x0004)
> rtl_w0w1_phy(tp, 0x10, 0x0000, 0x0004);
>
> rtl_writephy(tp, 0x1f, 0x0000);
> @@ -4095,7 +4123,9 @@ static void rtl8168ep_1_hw_phy_config(struct rtl8169_private *tp)
>
> /* Check ALDPS bit, disable it if enabled */
> rtl_writephy(tp, 0x1f, 0x0a43);
> - if (rtl_readphy(tp, 0x10) & 0x0004)
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x10, 0x0004, 0x0000);
> + else if (rtl_readphy(tp, 0x10) & 0x0004)
> rtl_w0w1_phy(tp, 0x10, 0x0000, 0x0004);
>
> rtl_writephy(tp, 0x1f, 0x0000);
> @@ -4186,7 +4216,9 @@ static void rtl8168ep_2_hw_phy_config(struct rtl8169_private *tp)
>
> /* Check ALDPS bit, disable it if enabled */
> rtl_writephy(tp, 0x1f, 0x0a43);
> - if (rtl_readphy(tp, 0x10) & 0x0004)
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x10, 0x0004, 0x0000);
> + else if (rtl_readphy(tp, 0x10) & 0x0004)
> rtl_w0w1_phy(tp, 0x10, 0x0000, 0x0004);
>
> rtl_writephy(tp, 0x1f, 0x0000);
> @@ -4233,6 +4265,15 @@ static void rtl8105e_hw_phy_config(struct rtl8169_private *tp)
> rtl_apply_firmware(tp);
>
> rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
> +
> + /* Check ALDPS bit, disable it if enabled */
> + rtl_writephy(tp, 0x1f, 0x0000);
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x18, 0x1000, 0x0000);
> + else if (rtl_readphy(tp, 0x18) & 0x1000)
> + rtl_w0w1_phy(tp, 0x18, 0x0000, 0x1000);
> +
> + rtl_writephy(tp, 0x1f, 0x0000);
> }
>
> static void rtl8402_hw_phy_config(struct rtl8169_private *tp)
> @@ -4250,6 +4291,15 @@ static void rtl8402_hw_phy_config(struct rtl8169_private *tp)
> rtl_writephy(tp, 0x10, 0x401f);
> rtl_writephy(tp, 0x19, 0x7030);
> rtl_writephy(tp, 0x1f, 0x0000);
> +
> + /* Check ALDPS bit, disable it if enabled */
> + rtl_writephy(tp, 0x1f, 0x0000);
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x18, 0x1000, 0x0000);
> + else if (rtl_readphy(tp, 0x18) & 0x1000)
> + rtl_w0w1_phy(tp, 0x18, 0x0000, 0x1000);
> +
> + rtl_writephy(tp, 0x1f, 0x0000);
> }
>
> static void rtl8106e_hw_phy_config(struct rtl8169_private *tp)
> @@ -4272,6 +4322,15 @@ static void rtl8106e_hw_phy_config(struct rtl8169_private *tp)
> rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
>
> rtl_eri_write(tp, 0x1d0, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
> +
> + /* Check ALDPS bit, disable it if enabled */
> + rtl_writephy(tp, 0x1f, 0x0000);
> + if (enable_aldps)
> + rtl_w0w1_phy(tp, 0x18, 0x1000, 0x0000);
> + else if (rtl_readphy(tp, 0x18) & 0x1000)
> + rtl_w0w1_phy(tp, 0x18, 0x0000, 0x1000);
> +
> + rtl_writephy(tp, 0x1f, 0x0000);
> }
>
> static void rtl_hw_phy_config(struct net_device *dev)
> @@ -5290,6 +5349,18 @@ static void rtl_pcie_state_l2l3_enable(struct rtl8169_private *tp, bool enable)
> RTL_W8(tp, Config3, data);
> }
>
> +static void rtl_hw_internal_aspm_clkreq_enable(struct rtl8169_private *tp,
> + bool enable)
> +{
> + if (enable) {
> + RTL_W8(tp, Config2, RTL_R8(tp, Config2) | ClkReqEn);
> + RTL_W8(tp, Config5, RTL_R8(tp, Config5) | ASPM_en);
> + } else {
> + RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~ClkReqEn);
> + RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~ASPM_en);
> + }
> +}
> +
> static void rtl_hw_start_8168bb(struct rtl8169_private *tp)
> {
> RTL_W8(tp, Config3, RTL_R8(tp, Config3) & ~Beacon_en);
> @@ -5646,9 +5717,10 @@ static void rtl_hw_start_8168g_1(struct rtl8169_private *tp)
> rtl_hw_start_8168g(tp);
>
> /* disable aspm and clock request before access ephy */
> - RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~ClkReqEn);
> - RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~ASPM_en);
> + rtl_hw_internal_aspm_clkreq_enable(tp, false);
> rtl_ephy_init(tp, e_info_8168g_1, ARRAY_SIZE(e_info_8168g_1));
> + if (enable_aspm)
> + rtl_hw_internal_aspm_clkreq_enable(tp, true);
> }
>
> static void rtl_hw_start_8168g_2(struct rtl8169_private *tp)
> @@ -5681,9 +5753,10 @@ static void rtl_hw_start_8411_2(struct rtl8169_private *tp)
> rtl_hw_start_8168g(tp);
>
> /* disable aspm and clock request before access ephy */
> - RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~ClkReqEn);
> - RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~ASPM_en);
> + rtl_hw_internal_aspm_clkreq_enable(tp, false);
> rtl_ephy_init(tp, e_info_8411_2, ARRAY_SIZE(e_info_8411_2));
> + if (enable_aspm)
> + rtl_hw_internal_aspm_clkreq_enable(tp, true);
> }
>
> static void rtl_hw_start_8168h_1(struct rtl8169_private *tp)
> @@ -5700,8 +5773,7 @@ static void rtl_hw_start_8168h_1(struct rtl8169_private *tp)
> };
>
> /* disable aspm and clock request before access ephy */
> - RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~ClkReqEn);
> - RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~ASPM_en);
> + rtl_hw_internal_aspm_clkreq_enable(tp, false);
> rtl_ephy_init(tp, e_info_8168h_1, ARRAY_SIZE(e_info_8168h_1));
>
> RTL_W32(tp, TxConfig, RTL_R32(tp, TxConfig) | TXCFG_AUTO_FIFO);
> @@ -5780,6 +5852,9 @@ static void rtl_hw_start_8168h_1(struct rtl8169_private *tp)
> r8168_mac_ocp_write(tp, 0xe63e, 0x0000);
> r8168_mac_ocp_write(tp, 0xc094, 0x0000);
> r8168_mac_ocp_write(tp, 0xc09e, 0x0000);
> +
> + if (enable_aspm)
> + rtl_hw_internal_aspm_clkreq_enable(tp, true);
> }
>
> static void rtl_hw_start_8168ep(struct rtl8169_private *tp)
> @@ -5831,11 +5906,13 @@ static void rtl_hw_start_8168ep_1(struct rtl8169_private *tp)
> };
>
> /* disable aspm and clock request before access ephy */
> - RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~ClkReqEn);
> - RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~ASPM_en);
> + rtl_hw_internal_aspm_clkreq_enable(tp, false);
> rtl_ephy_init(tp, e_info_8168ep_1, ARRAY_SIZE(e_info_8168ep_1));
>
> rtl_hw_start_8168ep(tp);
> +
> + if (enable_aspm)
> + rtl_hw_internal_aspm_clkreq_enable(tp, true);
> }
>
> static void rtl_hw_start_8168ep_2(struct rtl8169_private *tp)
> @@ -5847,14 +5924,16 @@ static void rtl_hw_start_8168ep_2(struct rtl8169_private *tp)
> };
>
> /* disable aspm and clock request before access ephy */
> - RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~ClkReqEn);
> - RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~ASPM_en);
> + rtl_hw_internal_aspm_clkreq_enable(tp, false);
> rtl_ephy_init(tp, e_info_8168ep_2, ARRAY_SIZE(e_info_8168ep_2));
>
> rtl_hw_start_8168ep(tp);
>
> RTL_W8(tp, DLLPR, RTL_R8(tp, DLLPR) & ~PFM_EN);
> RTL_W8(tp, MISC_1, RTL_R8(tp, MISC_1) & ~PFM_D3COLD_EN);
> +
> + if (enable_aspm)
> + rtl_hw_internal_aspm_clkreq_enable(tp, true);
> }
>
> static void rtl_hw_start_8168ep_3(struct rtl8169_private *tp)
> @@ -5868,8 +5947,7 @@ static void rtl_hw_start_8168ep_3(struct rtl8169_private *tp)
> };
>
> /* disable aspm and clock request before access ephy */
> - RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~ClkReqEn);
> - RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~ASPM_en);
> + rtl_hw_internal_aspm_clkreq_enable(tp, false);
> rtl_ephy_init(tp, e_info_8168ep_3, ARRAY_SIZE(e_info_8168ep_3));
>
> rtl_hw_start_8168ep(tp);
> @@ -5889,6 +5967,9 @@ static void rtl_hw_start_8168ep_3(struct rtl8169_private *tp)
> data = r8168_mac_ocp_read(tp, 0xe860);
> data |= 0x0080;
> r8168_mac_ocp_write(tp, 0xe860, data);
> +
> + if (enable_aspm)
> + rtl_hw_internal_aspm_clkreq_enable(tp, true);
> }
>
> static void rtl_hw_start_8168(struct rtl8169_private *tp)
> @@ -6364,7 +6445,7 @@ static void rtl8169_tx_clear(struct rtl8169_private *tp)
> tp->cur_tx = tp->dirty_tx = 0;
> }
>
> -static void rtl_reset_work(struct rtl8169_private *tp)
> +static void _rtl_reset_work(struct rtl8169_private *tp)
> {
> struct net_device *dev = tp->dev;
> int i;
> @@ -6384,6 +6465,33 @@ static void rtl_reset_work(struct rtl8169_private *tp)
> napi_enable(&tp->napi);
> rtl_hw_start(tp);
> netif_wake_queue(dev);
> +}
> +
> +static void rtl8169_check_link_status(struct net_device *dev,
> + struct rtl8169_private *tp)
> +{
> + struct device *d = tp_to_dev(tp);
> +
> + if (tp->link_ok(tp)) {
> + rtl_link_chg_patch(tp);
> + /* This is to cancel a scheduled suspend if there's one. */
> + if (pm_request_resume(d))
> + _rtl_reset_work(tp);
This reset was added, what is it good for and how is it related to
ASPM/ALDPS? It looks a little bogus, especially considering that
pm_request_resume() can return also positive values.
> + netif_carrier_on(dev);
> + if (net_ratelimit())
> + netif_info(tp, ifup, dev, "link up\n");
> + } else {
> + netif_carrier_off(dev);
> + netif_info(tp, ifdown, dev, "link down\n");
> + pm_runtime_idle(d);
> + }
> +}
> +
> +static void rtl_reset_work(struct rtl8169_private *tp)
> +{
> + struct net_device *dev = tp->dev;
> +
> + _rtl_reset_work(tp);
> rtl8169_check_link_status(dev, tp);
> }
>
> @@ -7649,8 +7757,12 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> /* disable ASPM completely as that cause random device stop working
> * problems as well as full system hangs for some PCIe devices users */
> - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
> - PCIE_LINK_STATE_CLKPM);
> + if (!enable_aspm) {
> + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
> + PCIE_LINK_STATE_L1 |
> + PCIE_LINK_STATE_CLKPM);
> + netif_info(tp, probe, dev, "ASPM disabled\n");
You should use dev_info() here because the net_device isn't registered yet.
> + }
>
> /* enable device (incl. PCI PM wakeup and hotplug setup) */
> rc = pcim_enable_device(pdev);
>
next prev parent reply other threads:[~2018-06-05 19:13 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-05 4:58 [PATCH] r8169: Reinstate ALDPS and ASPM support Kai-Heng Feng
2018-06-05 5:02 ` Kai Heng Feng
2018-06-05 6:34 ` Ryankao
2018-06-05 17:28 ` Bjorn Helgaas
2018-06-05 19:11 ` Bjorn Helgaas
2018-06-05 19:17 ` Heiner Kallweit
2018-06-05 19:27 ` Florian Fainelli
2018-06-05 19:41 ` Heiner Kallweit
2018-06-05 19:24 ` Heiner Kallweit
2018-06-06 6:58 ` Kai-Heng Feng
2018-06-05 14:11 ` Andrew Lunn
2018-06-05 14:15 ` David Miller
2018-06-05 16:47 ` Florian Fainelli
2018-06-06 6:47 ` Kai-Heng Feng
2018-06-06 12:34 ` Andrew Lunn
2018-06-07 4:15 ` Kai Heng Feng
2018-06-05 19:13 ` Heiner Kallweit [this message]
2018-06-06 6:12 ` Simon Horman
2018-06-06 7:03 ` Kai-Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dfd3a9b4-3f89-9849-8d71-6fc49374b1df@gmail.com \
--to=hkallweit1@gmail.com \
--cc=davem@davemloft.net \
--cc=hayeswang@realtek.com \
--cc=kai.heng.feng@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
--cc=ryankao@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).