[PATCH v4 0/6] crypto: Add Qcom PRNG support

[PATCH v4 0/6] crypto: Add Qcom PRNG support

[Vinod Koul]

This series removes the hwrng qcom driver and replaces it with crypto qcom
driver and then adds support for Execution Environment (EE) found in v2
version of the hardware and ACPI support for these

Changes in v4:
 - Use memcpy for data copy
 - Fix trailing bytes copy
 - Fix ACPI ID table name

Timur Tabi (1):
  crypto: qcom: Add ACPI support

Vinod Koul (5):
  hwrng: remove msm hw_random driver
  dt-bindings: crypto: Move prng binding to crypto
  crypto: Add Qcom prng driver
  dt-bindings: crypto: Add new compatible qcom,prng-ee
  crypto: qcom: Add support for prng-ee

 .../bindings/{rng => crypto}/qcom,prng.txt         |   4 +-
 drivers/char/hw_random/Kconfig                     |  13 --
 drivers/char/hw_random/Makefile                    |   1 -
 drivers/char/hw_random/msm-rng.c                   | 183 ----------------
 drivers/crypto/Kconfig                             |  11 +
 drivers/crypto/Makefile                            |   1 +
 drivers/crypto/qcom-rng.c                          | 237 +++++++++++++++++++++
 7 files changed, 252 insertions(+), 198 deletions(-)
 rename Documentation/devicetree/bindings/{rng => crypto}/qcom,prng.txt (73%)
 delete mode 100644 drivers/char/hw_random/msm-rng.c
 create mode 100644 drivers/crypto/qcom-rng.c

-- 
2.14.4

[PATCH v4 1/6] hwrng: remove msm hw_random driver

[Vinod Koul]

This driver is for a pseudo-rng so should not be added in hwrng.
Remove it so that it's replacement can be added.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/char/hw_random/Kconfig   |  13 ---
 drivers/char/hw_random/Makefile  |   1 -
 drivers/char/hw_random/msm-rng.c | 183 ---------------------------------------
 3 files changed, 197 deletions(-)
 delete mode 100644 drivers/char/hw_random/msm-rng.c

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index c34b257d852d..dac895dc01b9 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -307,19 +307,6 @@ config HW_RANDOM_HISI
 
 	  If unsure, say Y.
 
-config HW_RANDOM_MSM
-	tristate "Qualcomm SoCs Random Number Generator support"
-	depends on HW_RANDOM && ARCH_QCOM
-	default HW_RANDOM
-	---help---
-	  This driver provides kernel-side support for the Random Number
-	  Generator hardware found on Qualcomm SoCs.
-
-	  To compile this driver as a module, choose M here. the
-	  module will be called msm-rng.
-
-	  If unsure, say Y.
-
 config HW_RANDOM_ST
 	tristate "ST Microelectronics HW Random Number Generator support"
 	depends on HW_RANDOM && ARCH_STI
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 533e913c93d1..e35ec3ce3a20 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_HW_RANDOM_POWERNV) += powernv-rng.o
 obj-$(CONFIG_HW_RANDOM_HISI)	+= hisi-rng.o
 obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
 obj-$(CONFIG_HW_RANDOM_IPROC_RNG200) += iproc-rng200.o
-obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o
 obj-$(CONFIG_HW_RANDOM_ST) += st-rng.o
 obj-$(CONFIG_HW_RANDOM_XGENE) += xgene-rng.o
 obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
diff --git a/drivers/char/hw_random/msm-rng.c b/drivers/char/hw_random/msm-rng.c
deleted file mode 100644
index 841fee845ec9..000000000000
--- a/drivers/char/hw_random/msm-rng.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/hw_random.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-
-/* Device specific register offsets */
-#define PRNG_DATA_OUT		0x0000
-#define PRNG_STATUS		0x0004
-#define PRNG_LFSR_CFG		0x0100
-#define PRNG_CONFIG		0x0104
-
-/* Device specific register masks and config values */
-#define PRNG_LFSR_CFG_MASK	0x0000ffff
-#define PRNG_LFSR_CFG_CLOCKS	0x0000dddd
-#define PRNG_CONFIG_HW_ENABLE	BIT(1)
-#define PRNG_STATUS_DATA_AVAIL	BIT(0)
-
-#define MAX_HW_FIFO_DEPTH	16
-#define MAX_HW_FIFO_SIZE	(MAX_HW_FIFO_DEPTH * 4)
-#define WORD_SZ			4
-
-struct msm_rng {
-	void __iomem *base;
-	struct clk *clk;
-	struct hwrng hwrng;
-};
-
-#define to_msm_rng(p)	container_of(p, struct msm_rng, hwrng)
-
-static int msm_rng_enable(struct hwrng *hwrng, int enable)
-{
-	struct msm_rng *rng = to_msm_rng(hwrng);
-	u32 val;
-	int ret;
-
-	ret = clk_prepare_enable(rng->clk);
-	if (ret)
-		return ret;
-
-	if (enable) {
-		/* Enable PRNG only if it is not already enabled */
-		val = readl_relaxed(rng->base + PRNG_CONFIG);
-		if (val & PRNG_CONFIG_HW_ENABLE)
-			goto already_enabled;
-
-		val = readl_relaxed(rng->base + PRNG_LFSR_CFG);
-		val &= ~PRNG_LFSR_CFG_MASK;
-		val |= PRNG_LFSR_CFG_CLOCKS;
-		writel(val, rng->base + PRNG_LFSR_CFG);
-
-		val = readl_relaxed(rng->base + PRNG_CONFIG);
-		val |= PRNG_CONFIG_HW_ENABLE;
-		writel(val, rng->base + PRNG_CONFIG);
-	} else {
-		val = readl_relaxed(rng->base + PRNG_CONFIG);
-		val &= ~PRNG_CONFIG_HW_ENABLE;
-		writel(val, rng->base + PRNG_CONFIG);
-	}
-
-already_enabled:
-	clk_disable_unprepare(rng->clk);
-	return 0;
-}
-
-static int msm_rng_read(struct hwrng *hwrng, void *data, size_t max, bool wait)
-{
-	struct msm_rng *rng = to_msm_rng(hwrng);
-	size_t currsize = 0;
-	u32 *retdata = data;
-	size_t maxsize;
-	int ret;
-	u32 val;
-
-	/* calculate max size bytes to transfer back to caller */
-	maxsize = min_t(size_t, MAX_HW_FIFO_SIZE, max);
-
-	ret = clk_prepare_enable(rng->clk);
-	if (ret)
-		return ret;
-
-	/* read random data from hardware */
-	do {
-		val = readl_relaxed(rng->base + PRNG_STATUS);
-		if (!(val & PRNG_STATUS_DATA_AVAIL))
-			break;
-
-		val = readl_relaxed(rng->base + PRNG_DATA_OUT);
-		if (!val)
-			break;
-
-		*retdata++ = val;
-		currsize += WORD_SZ;
-
-		/* make sure we stay on 32bit boundary */
-		if ((maxsize - currsize) < WORD_SZ)
-			break;
-	} while (currsize < maxsize);
-
-	clk_disable_unprepare(rng->clk);
-
-	return currsize;
-}
-
-static int msm_rng_init(struct hwrng *hwrng)
-{
-	return msm_rng_enable(hwrng, 1);
-}
-
-static void msm_rng_cleanup(struct hwrng *hwrng)
-{
-	msm_rng_enable(hwrng, 0);
-}
-
-static int msm_rng_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct msm_rng *rng;
-	int ret;
-
-	rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
-	if (!rng)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, rng);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	rng->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(rng->base))
-		return PTR_ERR(rng->base);
-
-	rng->clk = devm_clk_get(&pdev->dev, "core");
-	if (IS_ERR(rng->clk))
-		return PTR_ERR(rng->clk);
-
-	rng->hwrng.name = KBUILD_MODNAME,
-	rng->hwrng.init = msm_rng_init,
-	rng->hwrng.cleanup = msm_rng_cleanup,
-	rng->hwrng.read = msm_rng_read,
-
-	ret = devm_hwrng_register(&pdev->dev, &rng->hwrng);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register hwrng\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-static const struct of_device_id msm_rng_of_match[] = {
-	{ .compatible = "qcom,prng", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, msm_rng_of_match);
-
-static struct platform_driver msm_rng_driver = {
-	.probe = msm_rng_probe,
-	.driver = {
-		.name = KBUILD_MODNAME,
-		.of_match_table = of_match_ptr(msm_rng_of_match),
-	}
-};
-module_platform_driver(msm_rng_driver);
-
-MODULE_ALIAS("platform:" KBUILD_MODNAME);
-MODULE_AUTHOR("The Linux Foundation");
-MODULE_DESCRIPTION("Qualcomm MSM random number generator driver");
-MODULE_LICENSE("GPL v2");
-- 
2.14.4

[PATCH v4 2/6] dt-bindings: crypto: Move prng binding to crypto

[Vinod Koul]

Now that we are adding new driver for prng in crypto, move the
binding as well.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 Documentation/devicetree/bindings/{rng => crypto}/qcom,prng.txt | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename Documentation/devicetree/bindings/{rng => crypto}/qcom,prng.txt (100%)

diff --git a/Documentation/devicetree/bindings/rng/qcom,prng.txt b/Documentation/devicetree/bindings/crypto/qcom,prng.txt
similarity index 100%
rename from Documentation/devicetree/bindings/rng/qcom,prng.txt
rename to Documentation/devicetree/bindings/crypto/qcom,prng.txt
-- 
2.14.4

[PATCH v4 3/6] crypto: Add Qcom prng driver

[Vinod Koul]

This ports the Qcom prng from older hw_random driver.

No change of functionality and move from hw_random to crypto
APIs is done.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/crypto/Kconfig    |  11 +++
 drivers/crypto/Makefile   |   1 +
 drivers/crypto/qcom-rng.c | 208 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 220 insertions(+)
 create mode 100644 drivers/crypto/qcom-rng.c

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 43cccf6aff61..b8d9e71e550a 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -585,6 +585,17 @@ config CRYPTO_DEV_QCE
 	  hardware. To compile this driver as a module, choose M here. The
 	  module will be called qcrypto.
 
+config CRYPTO_DEV_QCOM_RNG
+	tristate "Qualcomm Randon Number Generator Driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	select CRYPTO_RNG
+	help
+	  This driver provides support for the Random Number
+	  Generator hardware found on Qualcomm SoCs.
+
+	  To compile this driver as a module, choose M here. the
+          module will be called qcom-rng. If unsure, say N.
+
 config CRYPTO_DEV_VMX
 	bool "Support for VMX cryptographic acceleration instructions"
 	depends on PPC64 && VSX
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 7ae87b4f6c8d..3602875c4f80 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_CRYPTO_DEV_PICOXCELL) += picoxcell_crypto.o
 obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/
 obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/
 obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/
+obj-$(CONFIG_CRYPTO_DEV_QCOM_RNG) += qcom-rng.o
 obj-$(CONFIG_CRYPTO_DEV_ROCKCHIP) += rockchip/
 obj-$(CONFIG_CRYPTO_DEV_S5P) += s5p-sss.o
 obj-$(CONFIG_CRYPTO_DEV_SAHARA) += sahara.o
diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
new file mode 100644
index 000000000000..53e1d276e05e
--- /dev/null
+++ b/drivers/crypto/qcom-rng.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-18 Linaro Limited
+//
+// Based on msm-rng.c and downstream driver
+
+#include <crypto/internal/rng.h>
+#include <linux/clk.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+/* Device specific register offsets */
+#define PRNG_DATA_OUT		0x0000
+#define PRNG_STATUS		0x0004
+#define PRNG_LFSR_CFG		0x0100
+#define PRNG_CONFIG		0x0104
+
+/* Device specific register masks and config values */
+#define PRNG_LFSR_CFG_MASK	0x0000ffff
+#define PRNG_LFSR_CFG_CLOCKS	0x0000dddd
+#define PRNG_CONFIG_HW_ENABLE	BIT(1)
+#define PRNG_STATUS_DATA_AVAIL	BIT(0)
+
+#define WORD_SZ			4
+
+struct qcom_rng {
+	struct mutex lock;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+struct qcom_rng_ctx {
+	struct qcom_rng *rng;
+};
+
+static struct qcom_rng *qcom_rng_dev;
+
+static int qcom_rng_read(struct qcom_rng *rng, u8 *data, unsigned int max)
+{
+	unsigned int currsize = 0;
+	u32 val;
+
+	/* read random data from hardware */
+	do {
+		val = readl_relaxed(rng->base + PRNG_STATUS);
+		if (!(val & PRNG_STATUS_DATA_AVAIL))
+			break;
+
+		val = readl_relaxed(rng->base + PRNG_DATA_OUT);
+		if (!val)
+			break;
+
+		if ((max - currsize) >= WORD_SZ) {
+			memcpy(data, &val, WORD_SZ);
+			data += WORD_SZ;
+			currsize += WORD_SZ;
+		} else {
+			/* copy only remaining bytes */
+			memcpy(data, &val, max - currsize);
+			break;
+		}
+	} while (currsize < max);
+
+	return currsize;
+}
+
+static int qcom_rng_generate(struct crypto_rng *tfm,
+			     const u8 *src, unsigned int slen,
+			     u8 *dstn, unsigned int dlen)
+{
+	struct qcom_rng_ctx *ctx = crypto_rng_ctx(tfm);
+	struct qcom_rng *rng = ctx->rng;
+	int ret;
+
+	ret = clk_prepare_enable(rng->clk);
+	if (ret)
+		return ret;
+
+	mutex_lock(&rng->lock);
+
+	ret = qcom_rng_read(rng, dstn, dlen);
+
+	mutex_unlock(&rng->lock);
+	clk_disable_unprepare(rng->clk);
+
+	return 0;
+}
+
+static int qcom_rng_seed(struct crypto_rng *tfm, const u8 *seed,
+			 unsigned int slen)
+{
+	return 0;
+}
+
+static int qcom_rng_enable(struct qcom_rng *rng)
+{
+	u32 val;
+	int ret;
+
+	ret = clk_prepare_enable(rng->clk);
+	if (ret)
+		return ret;
+
+	/* Enable PRNG only if it is not already enabled */
+	val = readl_relaxed(rng->base + PRNG_CONFIG);
+	if (val & PRNG_CONFIG_HW_ENABLE)
+		goto already_enabled;
+
+	val = readl_relaxed(rng->base + PRNG_LFSR_CFG);
+	val &= ~PRNG_LFSR_CFG_MASK;
+	val |= PRNG_LFSR_CFG_CLOCKS;
+	writel(val, rng->base + PRNG_LFSR_CFG);
+
+	val = readl_relaxed(rng->base + PRNG_CONFIG);
+	val |= PRNG_CONFIG_HW_ENABLE;
+	writel(val, rng->base + PRNG_CONFIG);
+
+already_enabled:
+	clk_disable_unprepare(rng->clk);
+
+	return 0;
+}
+
+static int qcom_rng_init(struct crypto_tfm *tfm)
+{
+	struct qcom_rng_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	ctx->rng = qcom_rng_dev;
+
+	return qcom_rng_enable(ctx->rng);
+}
+
+static struct rng_alg qcom_rng_alg = {
+	.generate	= qcom_rng_generate,
+	.seed		= qcom_rng_seed,
+	.seedsize	= 0,
+	.base		= {
+		.cra_name		= "stdrng",
+		.cra_driver_name	= "qcom-rng",
+		.cra_flags		= CRYPTO_ALG_TYPE_RNG,
+		.cra_priority		= 300,
+		.cra_ctxsize		= sizeof(struct qcom_rng_ctx),
+		.cra_module		= THIS_MODULE,
+		.cra_init		= qcom_rng_init,
+	}
+};
+
+static int qcom_rng_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct qcom_rng *rng;
+	int ret;
+
+	rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
+	if (!rng)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, rng);
+	mutex_init(&rng->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rng->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rng->base))
+		return PTR_ERR(rng->base);
+
+	rng->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(rng->clk))
+		return PTR_ERR(rng->clk);
+
+	qcom_rng_dev = rng;
+	ret = crypto_register_rng(&qcom_rng_alg);
+	if (ret) {
+		dev_err(&pdev->dev, "Register crypto rng failed: %d\n", ret);
+		qcom_rng_dev = NULL;
+	}
+
+	return ret;
+}
+
+static int qcom_rng_remove(struct platform_device *pdev)
+{
+	crypto_unregister_rng(&qcom_rng_alg);
+
+	qcom_rng_dev = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id qcom_rng_of_match[] = {
+	{ .compatible = "qcom,prng" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, qcom_rng_of_match);
+
+static struct platform_driver qcom_rng_driver = {
+	.probe = qcom_rng_probe,
+	.remove =  qcom_rng_remove,
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = of_match_ptr(qcom_rng_of_match),
+	}
+};
+module_platform_driver(qcom_rng_driver);
+
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
+MODULE_DESCRIPTION("Qualcomm random number generator driver");
+MODULE_LICENSE("GPL v2");
-- 
2.14.4

[PATCH v4 4/6] dt-bindings: crypto: Add new compatible qcom,prng-ee

[Vinod Koul]

Later qcom chips support v2 of the prng, which exposes an EE
(Execution Environment) for OS to use so add new compatible
qcom,prng-ee for this.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 Documentation/devicetree/bindings/crypto/qcom,prng.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.txt b/Documentation/devicetree/bindings/crypto/qcom,prng.txt
index 8e5853c2879b..7ee0e9eac973 100644
--- a/Documentation/devicetree/bindings/crypto/qcom,prng.txt
+++ b/Documentation/devicetree/bindings/crypto/qcom,prng.txt
@@ -2,7 +2,9 @@ Qualcomm MSM pseudo random number generator.
 
 Required properties:
 
-- compatible  : should be "qcom,prng"
+- compatible  : should be "qcom,prng" for 8916 etc
+              : should be "qcom,prng-ee" for 8996 and later using EE
+		(Execution Environment) slice of prng
 - reg         : specifies base physical address and size of the registers map
 - clocks      : phandle to clock-controller plus clock-specifier pair
 - clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
-- 
2.14.4

[PATCH v4 5/6] crypto: qcom: Add support for prng-ee

[Vinod Koul]

Qcom 8996 and later chips features multiple Execution Environments
(EE) and secure world is typically responsible for configuring the
prng.

Add driver data for qcom,prng as 0 and qcom,prng-ee as 1 and use
that to skip initialization routine.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/crypto/qcom-rng.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index 53e1d276e05e..f1bd86acaf9d 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -28,6 +28,7 @@ struct qcom_rng {
 	struct mutex lock;
 	void __iomem *base;
 	struct clk *clk;
+	unsigned int skip_init;
 };
 
 struct qcom_rng_ctx {
@@ -128,7 +129,10 @@ static int qcom_rng_init(struct crypto_tfm *tfm)
 
 	ctx->rng = qcom_rng_dev;
 
-	return qcom_rng_enable(ctx->rng);
+	if (!ctx->rng->skip_init)
+		return qcom_rng_enable(ctx->rng);
+
+	return 0;
 }
 
 static struct rng_alg qcom_rng_alg = {
@@ -168,6 +172,8 @@ static int qcom_rng_probe(struct platform_device *pdev)
 	if (IS_ERR(rng->clk))
 		return PTR_ERR(rng->clk);
 
+	rng->skip_init = (unsigned long)of_device_get_match_data(&pdev->dev);
+
 	qcom_rng_dev = rng;
 	ret = crypto_register_rng(&qcom_rng_alg);
 	if (ret) {
@@ -188,7 +194,8 @@ static int qcom_rng_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id qcom_rng_of_match[] = {
-	{ .compatible = "qcom,prng" },
+	{ .compatible = "qcom,prng", .data = (void *)0},
+	{ .compatible = "qcom,prng-ee", .data = (void *)1},
 	{}
 };
 MODULE_DEVICE_TABLE(of, qcom_rng_of_match);
-- 
2.14.4

[PATCH v4 6/6] crypto: qcom: Add ACPI support

[Vinod Koul]

From: Timur Tabi <timur@codeaurora.org>

Add support for probing on ACPI systems, with ACPI HID QCOM8160.

On ACPI systems, clocks are always enabled, the PRNG should
already be enabled, and the register region is read-only.
The driver only verifies that the hardware is already
enabled never tries to disable or configure it.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
[port to crypto API]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/crypto/qcom-rng.c | 30 ++++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index f1bd86acaf9d..385352e200db 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -4,6 +4,7 @@
 // Based on msm-rng.c and downstream driver
 
 #include <crypto/internal/rng.h>
+#include <linux/acpi.h>
 #include <linux/clk.h>
 #include <linux/crypto.h>
 #include <linux/module.h>
@@ -168,11 +169,21 @@ static int qcom_rng_probe(struct platform_device *pdev)
 	if (IS_ERR(rng->base))
 		return PTR_ERR(rng->base);
 
-	rng->clk = devm_clk_get(&pdev->dev, "core");
-	if (IS_ERR(rng->clk))
-		return PTR_ERR(rng->clk);
 
-	rng->skip_init = (unsigned long)of_device_get_match_data(&pdev->dev);
+	/*
+	 * ACPI systems have v2 hardware. The clocks are always enabled,
+	 * and we should skip init
+	 */
+	if (has_acpi_companion(&pdev->dev)) {
+		rng->skip_init = 1;
+	} else {
+		rng->clk = devm_clk_get(&pdev->dev, "core");
+		if (IS_ERR(rng->clk))
+			return PTR_ERR(rng->clk);
+
+		rng->skip_init =
+			(unsigned long)of_device_get_match_data(&pdev->dev);
+	}
 
 	qcom_rng_dev = rng;
 	ret = crypto_register_rng(&qcom_rng_alg);
@@ -193,6 +204,16 @@ static int qcom_rng_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id qcom_rng_acpi_match[] = {
+	{
+		.id = "QCOM8160",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
+#endif
+
 static const struct of_device_id qcom_rng_of_match[] = {
 	{ .compatible = "qcom,prng", .data = (void *)0},
 	{ .compatible = "qcom,prng-ee", .data = (void *)1},
@@ -206,6 +227,7 @@ static struct platform_driver qcom_rng_driver = {
 	.driver = {
 		.name = KBUILD_MODNAME,
 		.of_match_table = of_match_ptr(qcom_rng_of_match),
+		.acpi_match_table = ACPI_PTR(qcom_rng_acpi_match),
 	}
 };
 module_platform_driver(qcom_rng_driver);
-- 
2.14.4

Re: [PATCH v4 6/6] crypto: qcom: Add ACPI support

[Timur Tabi]

On 7/4/18 6:44 AM, Vinod Koul wrote:
> +	if (has_acpi_companion(&pdev->dev)) {
> +		rng->skip_init = 1;
> +	} else {
> +		rng->clk = devm_clk_get(&pdev->dev, "core");
> +		if (IS_ERR(rng->clk))
> +			return PTR_ERR(rng->clk);
> +
> +		rng->skip_init =
> +			(unsigned long)of_device_get_match_data(&pdev->dev);
> +	}

There is a device_get_match_data() function, if you want to be 
consistent between ACPI and DT.

Re: [PATCH v4 6/6] crypto: qcom: Add ACPI support

[Vinod]

On 04-07-18, 09:46, Timur Tabi wrote:
> On 7/4/18 6:44 AM, Vinod Koul wrote:
> > +	if (has_acpi_companion(&pdev->dev)) {
> > +		rng->skip_init = 1;
> > +	} else {
> > +		rng->clk = devm_clk_get(&pdev->dev, "core");
> > +		if (IS_ERR(rng->clk))
> > +			return PTR_ERR(rng->clk);
> > +
> > +		rng->skip_init =
> > +			(unsigned long)of_device_get_match_data(&pdev->dev);
> > +	}
> 
> There is a device_get_match_data() function, if you want to be consistent
> between ACPI and DT.

Yes we can add driver data in ACPI ID as well so code can be:

        if (!has_acpi_companion(&pdev->dev)) {
                rng->clk = devm_clk_get(&pdev->dev, "core");
                if (IS_ERR(rng->clk))
                        return PTR_ERR(rng->clk);
        }
        rng->skip_init = device_get_match_data(&pdev->dev);

Looks much neater.

I will wait for feedback on other patches before updating this.

Meanwhile any word from testing on ACPI systems?

Thanks
-- 
~Vinod

Re: [PATCH v4 6/6] crypto: qcom: Add ACPI support

[Timur Tabi]

On 7/5/18 1:07 AM, Vinod wrote:
> Meanwhile any word from testing on ACPI systems?

Jeff Hugo is handling that for me.  Since it's a whole new API, he's had 
to start over.

Re: [PATCH v4 6/6] crypto: qcom: Add ACPI support

[Vinod]

On 05-07-18, 07:23, Timur Tabi wrote:
> On 7/5/18 1:07 AM, Vinod wrote:
> > Meanwhile any word from testing on ACPI systems?
> 
> Jeff Hugo is handling that for me.  Since it's a whole new API, he's had to
> start over.

Okay great, I have already been thru the hoops, so please do ping me if
you folks have questions.

Thanks
-- 
~Vinod

Re: [PATCH v4 6/6] crypto: qcom: Add ACPI support

[Jeffrey Hugo]

On 7/4/2018 5:44 AM, Vinod Koul wrote:
> From: Timur Tabi <timur@codeaurora.org>
> 
> Add support for probing on ACPI systems, with ACPI HID QCOM8160.
> 
> On ACPI systems, clocks are always enabled, the PRNG should
> already be enabled, and the register region is read-only.
> The driver only verifies that the hardware is already
> enabled never tries to disable or configure it.
> 
> Signed-off-by: Timur Tabi <timur@codeaurora.org>
> [port to crypto API]
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>

> ---
>   drivers/crypto/qcom-rng.c | 30 ++++++++++++++++++++++++++----
>   1 file changed, 26 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
> index f1bd86acaf9d..385352e200db 100644
> --- a/drivers/crypto/qcom-rng.c
> +++ b/drivers/crypto/qcom-rng.c
> @@ -4,6 +4,7 @@
>   // Based on msm-rng.c and downstream driver
>   
>   #include <crypto/internal/rng.h>
> +#include <linux/acpi.h>
>   #include <linux/clk.h>
>   #include <linux/crypto.h>
>   #include <linux/module.h>
> @@ -168,11 +169,21 @@ static int qcom_rng_probe(struct platform_device *pdev)
>   	if (IS_ERR(rng->base))
>   		return PTR_ERR(rng->base);
>   
> -	rng->clk = devm_clk_get(&pdev->dev, "core");
> -	if (IS_ERR(rng->clk))
> -		return PTR_ERR(rng->clk);
>   
> -	rng->skip_init = (unsigned long)of_device_get_match_data(&pdev->dev);
> +	/*
> +	 * ACPI systems have v2 hardware. The clocks are always enabled,
> +	 * and we should skip init
> +	 */
> +	if (has_acpi_companion(&pdev->dev)) {
> +		rng->skip_init = 1;
> +	} else {
> +		rng->clk = devm_clk_get(&pdev->dev, "core");
> +		if (IS_ERR(rng->clk))
> +			return PTR_ERR(rng->clk);
> +
> +		rng->skip_init =
> +			(unsigned long)of_device_get_match_data(&pdev->dev);
> +	}
>   
>   	qcom_rng_dev = rng;
>   	ret = crypto_register_rng(&qcom_rng_alg);
> @@ -193,6 +204,16 @@ static int qcom_rng_remove(struct platform_device *pdev)
>   	return 0;
>   }
>   
> +#if IS_ENABLED(CONFIG_ACPI)
> +static const struct acpi_device_id qcom_rng_acpi_match[] = {
> +	{
> +		.id = "QCOM8160",
> +	},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
> +#endif
> +
>   static const struct of_device_id qcom_rng_of_match[] = {
>   	{ .compatible = "qcom,prng", .data = (void *)0},
>   	{ .compatible = "qcom,prng-ee", .data = (void *)1},
> @@ -206,6 +227,7 @@ static struct platform_driver qcom_rng_driver = {
>   	.driver = {
>   		.name = KBUILD_MODNAME,
>   		.of_match_table = of_match_ptr(qcom_rng_of_match),
> +		.acpi_match_table = ACPI_PTR(qcom_rng_acpi_match),
>   	}
>   };
>   module_platform_driver(qcom_rng_driver);
> 


-- 
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm 
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

Re: [PATCH v4 6/6] crypto: qcom: Add ACPI support

[Timur Tabi]

On 7/5/18 1:07 AM, Vinod wrote:
> Yes we can add driver data in ACPI ID as well so code can be:
> 
>          if (!has_acpi_companion(&pdev->dev)) {
>                  rng->clk = devm_clk_get(&pdev->dev, "core");
>                  if (IS_ERR(rng->clk))
>                          return PTR_ERR(rng->clk);
>          }
>          rng->skip_init = device_get_match_data(&pdev->dev);
> 
> Looks much neater.

Yeah, I like it.

> I will wait for feedback on other patches before updating this.

Jeff said it works, so I guess v5 will be good to go.

Re: [PATCH v4 6/6] crypto: qcom: Add ACPI support

[Vinod]

On 07-07-18, 13:05, Timur Tabi wrote:
> On 7/5/18 1:07 AM, Vinod wrote:
> > Yes we can add driver data in ACPI ID as well so code can be:
> > 
> >          if (!has_acpi_companion(&pdev->dev)) {
> >                  rng->clk = devm_clk_get(&pdev->dev, "core");
> >                  if (IS_ERR(rng->clk))
> >                          return PTR_ERR(rng->clk);
> >          }
> >          rng->skip_init = device_get_match_data(&pdev->dev);
> > 
> > Looks much neater.
> 
> Yeah, I like it.
> 
> > I will wait for feedback on other patches before updating this.
> 
> Jeff said it works, so I guess v5 will be good to go.

Yes posting that right now. It would be great if you folks can test
again on ACPI systems

Thanks
-- 
~Vinod

Re: [PATCH v4 6/6] crypto: qcom: Add ACPI support

[Jeffrey Hugo]

On 7/9/2018 12:01 AM, Vinod wrote:
> On 07-07-18, 13:05, Timur Tabi wrote:
>> On 7/5/18 1:07 AM, Vinod wrote:
>>> Yes we can add driver data in ACPI ID as well so code can be:
>>>
>>>           if (!has_acpi_companion(&pdev->dev)) {
>>>                   rng->clk = devm_clk_get(&pdev->dev, "core");
>>>                   if (IS_ERR(rng->clk))
>>>                           return PTR_ERR(rng->clk);
>>>           }
>>>           rng->skip_init = device_get_match_data(&pdev->dev);
>>>
>>> Looks much neater.
>>
>> Yeah, I like it.
>>
>>> I will wait for feedback on other patches before updating this.
>>
>> Jeff said it works, so I guess v5 will be good to go.
> 
> Yes posting that right now. It would be great if you folks can test
> again on ACPI systems
> 
> Thanks
> 
I might need a day, but I'll get to it.

-- 
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm 
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.