linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Bader <stefan.bader@canonical.com>
To: Mike Snitzer <snitzer@redhat.com>, Jens Axboe <axboe@kernel.dk>
Cc: linux-kernel@vger.kernel.org, linux-block@vger.kernel.org,
	dm-devel@redhat.com, Tyler Hicks <tyler.hicks@canonical.com>,
	Alasdair Kergon <agk@redhat.com>
Subject: Re: [PATCH 1/1] blk/core: Gracefully handle unset make_request_fn
Date: Tue, 28 Jan 2020 15:32:14 +0100	[thread overview]
Message-ID: <e0475dae-a55f-f30e-a82f-ee35cdb171c4@canonical.com> (raw)
In-Reply-To: <20200127193225.GA5065@redhat.com>


[-- Attachment #1.1: Type: text/plain, Size: 5940 bytes --]

On 27.01.20 20:32, Mike Snitzer wrote:
> On Thu, Jan 23 2020 at  1:52pm -0500,
> Jens Axboe <axboe@kernel.dk> wrote:
> 
>> On 1/23/20 10:28 AM, Mike Snitzer wrote:
>>> On Thu, Jan 23 2020 at  5:35am -0500,
>>> Mike Snitzer <snitzer@redhat.com> wrote:
>>>
>>>> On Thu, Jan 23 2020 at  4:17am -0500,
>>>> Stefan Bader <stefan.bader@canonical.com> wrote:
>>>>
>>>>> When device-mapper adapted for multi-queue functionality, they
>>>>> also re-organized the way the make-request function was set.
>>>>> Before, this happened when the device-mapper logical device was
>>>>> created. Now it is done once the mapping table gets loaded the
>>>>> first time (this also decides whether the block device is request
>>>>> or bio based).
>>>>>
>>>>> However in generic_make_request(), the request function gets used
>>>>> without further checks and this happens if one tries to mount such
>>>>> a partially set up device.
>>>>>
>>>>> This can easily be reproduced with the following steps:
>>>>>  - dmsetup create -n test
>>>>>  - mount /dev/dm-<#> /mnt
>>>>>
>>>>> This maybe is something which also should be fixed up in device-
>>>>> mapper.
>>>>
>>>> I'll look closer at other options.
>>>>
>>>>> But given there is already a check for an unset queue
>>>>> pointer and potentially there could be other drivers which do or
>>>>> might do the same, it sounds like a good move to add another check
>>>>> to generic_make_request_checks() and to bail out if the request
>>>>> function has not been set, yet.
>>>>>
>>>>> BugLink: https://bugs.launchpad.net/bugs/1860231
>>>>
>>>> >From that bug;
>>>> "The currently proposed fix introduces no chance of stability
>>>> regressions. There is a chance of a very small performance regression
>>>> since an additional pointer comparison is performed on each block layer
>>>> request but this is unlikely to be noticeable."
>>>>
>>>> This captures my immediate concern: slowing down everyone for this DM
>>>> edge-case isn't desirable.
>>>
>>> SO I had a look and there isn't anything easier than adding the proposed
>>> NULL check in generic_make_request_checks().  Given the many
>>> conditionals in that  function.. what's one more? ;)
>>>
>>> I looked at marking the queue frozen to prevent IO via
>>> blk_queue_enter()'s existing cheeck -- but that quickly felt like an
>>> abuse, especially in that there isn't a queue unfreeze for bio-based.
>>>
>>> Jens, I'll defer to you to judge this patch further.  If you're OK with
>>> it: cool.  If not, I'm open to suggestions for how to proceed.  
>>>
>>
>> It does kinda suck... The generic_make_request_checks() is a mess, and
>> this doesn't make it any better. Any reason why we can't solve this
>> two step setup in a clean fashion instead of patching around it like
>> this? Feels like a pretty bad hack, tbh.
> 
> I just staged the following DM fix:
> https://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git/commit/?h=dm-5.6&id=28a101d6b344f5a38d482a686d18b1205bc92333

Thanks Mike,

yeah this looks like it resolves the problem without adding any impact on the
generic I/O path. We certainly had thought about that but felt uncertain whether
it would not open other risks. Like something adding requests just before the
table load. Could this cause some I/O be handled by one function and the rest by
another? And would that really matter?

The other thing that was a bit strange but maybe someone else's problem is that
mount generated I/O requests to start with. The device size should be 0 still.


> 
> From: Mike Snitzer <snitzer@redhat.com>
> Date: Mon, 27 Jan 2020 14:07:23 -0500
> Subject: [PATCH] dm: fix potential for q->make_request_fn NULL pointer
> 
> Move blk_queue_make_request() to dm.c:alloc_dev() so that
> q->make_request_fn is never NULL during the lifetime of a DM device
> (even one that is created without a DM table).
> 
> Otherwise generic_make_request() will crash simply by doing:
>   dmsetup create -n test
>   mount /dev/dm-N /mnt
> 
> While at it, move ->congested_data initialization out of
> dm.c:alloc_dev() and into the bio-based specific init method.
> 
> Reported-by: Stefan Bader <stefan.bader@canonical.com>
> BugLink: https://bugs.launchpad.net/bugs/1860231
> Fixes: ff36ab34583a ("dm: remove request-based logic from make_request_fn wrapper")
> Depends-on: c12c9a3c3860c ("dm: various cleanups to md->queue initialization code")
> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
> ---
>  drivers/md/dm.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/md/dm.c b/drivers/md/dm.c
> index e8f9661a10a1..b89f07ee2eff 100644
> --- a/drivers/md/dm.c
> +++ b/drivers/md/dm.c
> @@ -1859,6 +1859,7 @@ static void dm_init_normal_md_queue(struct mapped_device *md)
>  	/*
>  	 * Initialize aspects of queue that aren't relevant for blk-mq
>  	 */
> +	md->queue->backing_dev_info->congested_data = md;
>  	md->queue->backing_dev_info->congested_fn = dm_any_congested;
>  }
>  
> @@ -1949,7 +1950,12 @@ static struct mapped_device *alloc_dev(int minor)
>  	if (!md->queue)
>  		goto bad;
>  	md->queue->queuedata = md;
> -	md->queue->backing_dev_info->congested_data = md;
> +	/*
> +	 * default to bio-based required ->make_request_fn until DM
> +	 * table is loaded and md->type established. If request-based
> +	 * table is loaded: blk-mq will override accordingly.
> +	 */
> +	blk_queue_make_request(md->queue, dm_make_request);
>  
>  	md->disk = alloc_disk_node(1, md->numa_node_id);
>  	if (!md->disk)
> @@ -2264,7 +2270,6 @@ int dm_setup_md_queue(struct mapped_device *md, struct dm_table *t)
>  	case DM_TYPE_DAX_BIO_BASED:
>  	case DM_TYPE_NVME_BIO_BASED:
>  		dm_init_normal_md_queue(md);
> -		blk_queue_make_request(md->queue, dm_make_request);
>  		break;
>  	case DM_TYPE_NONE:
>  		WARN_ON_ONCE(true);
> 



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  parent reply	other threads:[~2020-01-28 14:32 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-23  9:17 [PATCH 0/1] Handle NULL make_request_fn in generic_make_request() Stefan Bader
2020-01-23  9:17 ` [PATCH 1/1] blk/core: Gracefully handle unset make_request_fn Stefan Bader
2020-01-23 10:23   ` Tyler Hicks
2020-01-23 10:35   ` Mike Snitzer
2020-01-23 17:28     ` Mike Snitzer
2020-01-23 18:52       ` Jens Axboe
2020-01-24  6:04         ` Stefan Bader
2020-01-27 19:32         ` Mike Snitzer
2020-01-27 19:39           ` Jens Axboe
2020-01-28 14:32           ` Stefan Bader [this message]
2020-01-28 16:26             ` Mike Snitzer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e0475dae-a55f-f30e-a82f-ee35cdb171c4@canonical.com \
    --to=stefan.bader@canonical.com \
    --cc=agk@redhat.com \
    --cc=axboe@kernel.dk \
    --cc=dm-devel@redhat.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=snitzer@redhat.com \
    --cc=tyler.hicks@canonical.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).