linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* memory: mtk-smi: Add bandwidth initial golden setting for MT6779
@ 2020-01-08  6:41 Ming-Fan Chen
  2020-01-08  6:41 ` [PATCH v3 0/3] memory: mtk-smi: Add bandwidth initial golden setting Ming-Fan Chen
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Ming-Fan Chen @ 2020-01-08  6:41 UTC (permalink / raw)
  To: Rob Herring, Matthias Brugger
  Cc: Yong Wu, Evan Green, Joerg Roedel, devicetree, linux-kernel,
	linux-arm-kernel, linux-mediatek, wsd_upstream

This patch add description, basic nodes, config_port and
bandwidth initial golden setting for MT6779 SMI both smi-larb and smi-common.
The setting make better performance of memory control for multimedia modules.

changelog since v2:
Add GALS for mt6779 in smi-common.txt
Split basic nodes and config_port support from initial golden setting patch
Define local variable from long to short
Merge writel_relaxed into one line
Remove SMI_LARB_SW_FLAG in smi-larb


Ming-Fan Chen (3):
  dt-bindings: mediatek: Add binding for MT6779 SMI
  memory: mtk-smi: Add basic support for MT6779
  memory: mtk-smi: Add bandwidth initial golden setting

 .../memory-controllers/mediatek,smi-common.txt     |    5 +-
 .../memory-controllers/mediatek,smi-larb.txt       |    3 +-
 drivers/memory/mtk-smi.c                           |  140 +++++++++++++++++++-
 3 files changed, 144 insertions(+), 4 deletions(-)

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v3 0/3] memory: mtk-smi: Add bandwidth initial golden setting
  2020-01-08  6:41 memory: mtk-smi: Add bandwidth initial golden setting for MT6779 Ming-Fan Chen
@ 2020-01-08  6:41 ` Ming-Fan Chen
  2020-01-08  6:41 ` [PATCH v3 1/3] dt-bindings: mediatek: Add binding for MT6779 SMI Ming-Fan Chen
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 8+ messages in thread
From: Ming-Fan Chen @ 2020-01-08  6:41 UTC (permalink / raw)
  To: Rob Herring, Matthias Brugger
  Cc: Yong Wu, Evan Green, Joerg Roedel, devicetree, linux-kernel,
	linux-arm-kernel, linux-mediatek, wsd_upstream, Ming-Fan Chen

*** BLURB HERE ***

Ming-Fan Chen (3):
  dt-bindings: mediatek: Add binding for MT6779 SMI
  memory: mtk-smi: Add basic support for MT6779
  memory: mtk-smi: Add bandwidth initial golden setting

 .../memory-controllers/mediatek,smi-common.txt     |    5 +-
 .../memory-controllers/mediatek,smi-larb.txt       |    3 +-
 drivers/memory/mtk-smi.c                           |  140 +++++++++++++++++++-
 3 files changed, 144 insertions(+), 4 deletions(-)

-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v3 1/3] dt-bindings: mediatek: Add binding for MT6779 SMI
  2020-01-08  6:41 memory: mtk-smi: Add bandwidth initial golden setting for MT6779 Ming-Fan Chen
  2020-01-08  6:41 ` [PATCH v3 0/3] memory: mtk-smi: Add bandwidth initial golden setting Ming-Fan Chen
@ 2020-01-08  6:41 ` Ming-Fan Chen
  2020-01-08 15:15   ` Rob Herring
  2020-01-08  6:41 ` [PATCH v3 2/3] memory: mtk-smi: Add basic support for MT6779 Ming-Fan Chen
  2020-01-08  6:41 ` [PATCH v3 3/3] memory: mtk-smi: Add bandwidth initial golden setting Ming-Fan Chen
  3 siblings, 1 reply; 8+ messages in thread
From: Ming-Fan Chen @ 2020-01-08  6:41 UTC (permalink / raw)
  To: Rob Herring, Matthias Brugger
  Cc: Yong Wu, Evan Green, Joerg Roedel, devicetree, linux-kernel,
	linux-arm-kernel, linux-mediatek, wsd_upstream, Ming-Fan Chen

This patch add description for MT6779 SMI.
There are GALS in smi-larb but without clock of GALS alone.

changelog since v2:
Add GALS for mt6779 in smi-common.txt

Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
---
 .../memory-controllers/mediatek,smi-common.txt     |    5 +++--
 .../memory-controllers/mediatek,smi-larb.txt       |    3 ++-
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
index b478ade..b645736 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
@@ -5,7 +5,7 @@ The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
 Mediatek SMI have two generations of HW architecture, here is the list
 which generation the SoCs use:
 generation 1: mt2701 and mt7623.
-generation 2: mt2712, mt8173 and mt8183.
+generation 2: mt2712, mt6779, mt8173 and mt8183.
 
 There's slight differences between the two SMI, for generation 2, the
 register which control the iommu port is at each larb's register base. But
@@ -18,6 +18,7 @@ Required properties:
 - compatible : must be one of :
 	"mediatek,mt2701-smi-common"
 	"mediatek,mt2712-smi-common"
+	"mediatek,mt6779-smi-common"
 	"mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
 	"mediatek,mt8173-smi-common"
 	"mediatek,mt8183-smi-common"
@@ -35,7 +36,7 @@ Required properties:
   and these 2 option clocks for generation 2 smi HW:
   - "gals0": the path0 clock of GALS(Global Async Local Sync).
   - "gals1": the path1 clock of GALS(Global Async Local Sync).
-  Here is the list which has this GALS: mt8183.
+  Here is the list which has this GALS: mt6779 and mt8183.
 
 Example:
 	smi_common: smi@14022000 {
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
index 4b369b3..8f19dfe 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
@@ -6,6 +6,7 @@ Required properties:
 - compatible : must be one of :
 		"mediatek,mt2701-smi-larb"
 		"mediatek,mt2712-smi-larb"
+		"mediatek,mt6779-smi-larb"
 		"mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
 		"mediatek,mt8173-smi-larb"
 		"mediatek,mt8183-smi-larb"
@@ -21,7 +22,7 @@ Required properties:
   - "gals": the clock for GALS(Global Async Local Sync).
   Here is the list which has this GALS: mt8183.
 
-Required property for mt2701, mt2712 and mt7623:
+Required property for mt2701, mt2712, mt6779 and mt7623:
 - mediatek,larb-id :the hardware id of this larb.
 
 Example:
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v3 2/3] memory: mtk-smi: Add basic support for MT6779
  2020-01-08  6:41 memory: mtk-smi: Add bandwidth initial golden setting for MT6779 Ming-Fan Chen
  2020-01-08  6:41 ` [PATCH v3 0/3] memory: mtk-smi: Add bandwidth initial golden setting Ming-Fan Chen
  2020-01-08  6:41 ` [PATCH v3 1/3] dt-bindings: mediatek: Add binding for MT6779 SMI Ming-Fan Chen
@ 2020-01-08  6:41 ` Ming-Fan Chen
  2020-02-12 11:23   ` Matthias Brugger
  2020-01-08  6:41 ` [PATCH v3 3/3] memory: mtk-smi: Add bandwidth initial golden setting Ming-Fan Chen
  3 siblings, 1 reply; 8+ messages in thread
From: Ming-Fan Chen @ 2020-01-08  6:41 UTC (permalink / raw)
  To: Rob Herring, Matthias Brugger
  Cc: Yong Wu, Evan Green, Joerg Roedel, devicetree, linux-kernel,
	linux-arm-kernel, linux-mediatek, wsd_upstream, Ming-Fan Chen

Add smi-larb and smi-common nodes and config_port for MT6779.

changelog since v2:
Split basic nodes and config_port support from initial golden setting patch

Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
---
 drivers/memory/mtk-smi.c |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 439d7d8..d0b747a 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -239,6 +239,13 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 	.larb_direct_to_common_mask = BIT(8) | BIT(9),      /* bdpsys */
 };
 
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
+	.config_port  = mtk_smi_larb_config_port_gen2_general,
+	.larb_direct_to_common_mask =
+		BIT(4) | BIT(6) | BIT(11) | BIT(12) | BIT(13),
+		/* DUMMY | IPU0 | IPU1 | CCU | MDLA */
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
 	.has_gals                   = true,
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
@@ -260,6 +267,10 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 		.data = &mtk_smi_larb_mt2712
 	},
 	{
+		.compatible = "mediatek,mt6779-smi-larb",
+		.data = &mtk_smi_larb_mt6779
+	},
+	{
 		.compatible = "mediatek,mt8183-smi-larb",
 		.data = &mtk_smi_larb_mt8183
 	},
@@ -386,6 +397,13 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 	.gen = MTK_SMI_GEN2,
 };
 
+static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
+	.gen		= MTK_SMI_GEN2,
+	.has_gals	= true,
+	.bus_sel	= F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
+			  F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
+};
+
 static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
 	.gen      = MTK_SMI_GEN2,
 	.has_gals = true,
@@ -407,6 +425,10 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 		.data = &mtk_smi_common_gen2,
 	},
 	{
+		.compatible = "mediatek,mt6779-smi-common",
+		.data = &mtk_smi_common_mt6779,
+	},
+	{
 		.compatible = "mediatek,mt8183-smi-common",
 		.data = &mtk_smi_common_mt8183,
 	},
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v3 3/3] memory: mtk-smi: Add bandwidth initial golden setting
  2020-01-08  6:41 memory: mtk-smi: Add bandwidth initial golden setting for MT6779 Ming-Fan Chen
                   ` (2 preceding siblings ...)
  2020-01-08  6:41 ` [PATCH v3 2/3] memory: mtk-smi: Add basic support for MT6779 Ming-Fan Chen
@ 2020-01-08  6:41 ` Ming-Fan Chen
  2020-02-12 12:17   ` Matthias Brugger
  3 siblings, 1 reply; 8+ messages in thread
From: Ming-Fan Chen @ 2020-01-08  6:41 UTC (permalink / raw)
  To: Rob Herring, Matthias Brugger
  Cc: Yong Wu, Evan Green, Joerg Roedel, devicetree, linux-kernel,
	linux-arm-kernel, linux-mediatek, wsd_upstream, Ming-Fan Chen

SMI bandwidth initial golden setting for MT6779 make sure
better performance of memory control for multimedia modules.

changelog since v2:
Define local variable from long to short
Merge writel_relaxed into one line
Remove SMI_LARB_SW_FLAG in smi-larb

Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
---
 drivers/memory/mtk-smi.c |  118 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 117 insertions(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index d0b747a..222ac7e 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -41,21 +41,47 @@
 #define SMI_LARB_NONSEC_CON(id)	(0x380 + ((id) * 4))
 #define F_MMU_EN		BIT(0)
 
+#define SMI_LARB_CMD_THRT_CON	 0x24
+#define SMI_LARB_OSTDL_PORT	 0x200
+#define SMI_LARB_OSTDL_PORTx(id) (SMI_LARB_OSTDL_PORT + (((id) & 0x1f) << 2))
+
 /* SMI COMMON */
+#define SMI_L1LEN			0x100
+#define SMI_L1ARB0			0x104
+#define SMI_L1ARB(id)			(SMI_L1ARB0 + (((id) & 0x7) << 2))
+
 #define SMI_BUS_SEL			0x220
 #define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
 /* All are MMU0 defaultly. Only specialize mmu1 here. */
 #define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
 
+#define SMI_M4U_TH			0x234
+#define SMI_FIFO_TH1			0x238
+#define SMI_FIFO_TH2			0x23c
+#define SMI_DCM				0x300
+#define SMI_DUMMY			0x444
+
+#define SMI_LARB_PORT_NR_MAX		32
+#define SMI_LARB_MISC_NR		1
+
 enum mtk_smi_gen {
 	MTK_SMI_GEN1,
 	MTK_SMI_GEN2
 };
 
+struct mtk_smi_reg_pair {
+	u16	offset;
+	u32	value;
+};
+
 struct mtk_smi_common_plat {
 	enum mtk_smi_gen gen;
 	bool             has_gals;
 	u32              bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
+	bool                          has_bwc;
+	u8                            larb_nr;
+	const u16                     *l1arb;
+	const struct mtk_smi_reg_pair *misc;
 };
 
 struct mtk_smi_larb_gen {
@@ -63,6 +89,9 @@ struct mtk_smi_larb_gen {
 	void (*config_port)(struct device *);
 	unsigned int			larb_direct_to_common_mask;
 	bool				has_gals;
+	bool				has_bwc;
+	const u8			(*ostdl)[SMI_LARB_PORT_NR_MAX];
+	const struct mtk_smi_reg_pair	(*misc)[SMI_LARB_MISC_NR];
 };
 
 struct mtk_smi {
@@ -159,6 +188,8 @@ void mtk_smi_larb_put(struct device *larbdev)
 static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	const struct mtk_smi_reg_pair *misc;
+	const u8 *ostdl;
 	u32 reg;
 	int i;
 
@@ -170,6 +201,18 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
 		reg |= F_MMU_EN;
 		writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
 	}
+
+	if (!larb->larb_gen->has_bwc)
+		return;
+
+	for (i = 0, ostdl = larb->larb_gen->ostdl[larb->larbid];
+		i < SMI_LARB_PORT_NR_MAX; i++)
+		writel_relaxed(ostdl[i], larb->base + SMI_LARB_OSTDL_PORTx(i));
+
+	for (i = 0, misc = larb->larb_gen->misc[larb->larbid];
+		i < SMI_LARB_MISC_NR; i++)
+		writel_relaxed(misc[i].value, larb->base + misc[i].offset);
+	wmb(); /* make sure settings are written */
 }
 
 static void mtk_smi_larb_config_port_mt8173(struct device *dev)
@@ -239,11 +282,53 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 	.larb_direct_to_common_mask = BIT(8) | BIT(9),      /* bdpsys */
 };
 
+static const u8 mtk_smi_larb_mt6779_ostdl[][SMI_LARB_PORT_NR_MAX] = {
+	{0x28, 0x28, 0x01, 0x28, 0x01, 0x01, 0x0a, 0x0a, 0x28,},
+	{0x28, 0x01, 0x28, 0x28, 0x0a, 0x01, 0x01, 0x0d, 0x0d, 0x07,
+	 0x01, 0x07, 0x01, 0x28,},
+	{0x18, 0x01, 0x08, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02,
+	 0x01, 0x01},
+	{0x01, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01, 0x04, 0x02, 0x01,
+	 0x04, 0x01, 0x01, 0x01, 0x01, 0x04, 0x0b, 0x13, 0x14,},
+	{},
+	{0x13, 0x0f, 0x0d, 0x07, 0x07, 0x04, 0x03, 0x01, 0x03, 0x01,
+	 0x05, 0x0c, 0x01, 0x01, 0x08, 0x06, 0x02, 0x01, 0x08, 0x08,
+	 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
+	{0x01, 0x01, 0x01,},
+	{0x01, 0x01, 0x01, 0x01,},
+	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
+	{0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x04,
+	 0x04, 0x01, 0x01, 0x01, 0x02, 0x02, 0x04, 0x02, 0x01, 0x02,
+	 0x04, 0x02, 0x02, 0x01,},
+	{0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x1a,
+	 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x01, 0x02, 0x02, 0x04,
+	 0x02, 0x0a, 0x02, 0x02, 0x04, 0x02, 0x0a, 0x02, 0x04, 0x02, 0x04,},
+	{0x01, 0x01, 0x01, 0x01, 0x01,},
+};
+
+static const struct mtk_smi_reg_pair
+mtk_smi_larb_mt6779_misc[][SMI_LARB_MISC_NR] = {
+	{{SMI_LARB_CMD_THRT_CON, 0x370256},},
+	{{SMI_LARB_CMD_THRT_CON, 0x300256},},
+	{{SMI_LARB_CMD_THRT_CON, 0x370256},},
+	{},
+	{{SMI_LARB_CMD_THRT_CON, 0x300256},},
+	{{SMI_LARB_CMD_THRT_CON, 0x300256},},
+	{{SMI_LARB_CMD_THRT_CON, 0x300256},},
+	{{SMI_LARB_CMD_THRT_CON, 0x300256},},
+	{{SMI_LARB_CMD_THRT_CON, 0x370256},},
+	{{SMI_LARB_CMD_THRT_CON, 0x370256},},
+	{{SMI_LARB_CMD_THRT_CON, 0x370256},},
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
 	.config_port  = mtk_smi_larb_config_port_gen2_general,
 	.larb_direct_to_common_mask =
 		BIT(4) | BIT(6) | BIT(11) | BIT(12) | BIT(13),
 		/* DUMMY | IPU0 | IPU1 | CCU | MDLA */
+	.has_bwc = true,
+	.ostdl   = mtk_smi_larb_mt6779_ostdl,
+	.misc    = mtk_smi_larb_mt6779_misc,
 };
 
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
@@ -397,11 +482,30 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 	.gen = MTK_SMI_GEN2,
 };
 
+static const u16 mtk_smi_common_mt6779_l1arb[] = {
+	0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000,
+};
+
+static const struct
+mtk_smi_reg_pair mtk_smi_common_mt6779_misc[SMI_COMMON_MISC_NR] = {
+	{SMI_L1LEN, 0xb},
+	{SMI_M4U_TH, 0xe100e10},
+	{SMI_FIFO_TH1, 0x506090a},
+	{SMI_FIFO_TH2, 0x506090a},
+	{SMI_DCM, 0x4f1},
+	{SMI_DUMMY, 0x1},
+};
+
 static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
 	.gen		= MTK_SMI_GEN2,
 	.has_gals	= true,
 	.bus_sel	= F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
 			  F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
+	.has_bwc	= true,
+	.larb_nr	= ARRAY_SIZE(mtk_smi_common_mt6779_l1arb),
+	.l1arb		= mtk_smi_common_mt6779_l1arb,
+	.misc_nr	= ARRAY_SIZE(mtk_smi_common_mt6779_misc),
+	.misc		= mtk_smi_common_mt6779_misc,
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
@@ -506,7 +610,7 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 {
 	struct mtk_smi *common = dev_get_drvdata(dev);
 	u32 bus_sel = common->plat->bus_sel;
-	int ret;
+	int i, ret;
 
 	ret = mtk_smi_clk_enable(common);
 	if (ret) {
@@ -516,6 +620,18 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 
 	if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
 		writel(bus_sel, common->base + SMI_BUS_SEL);
+
+	if (!common->plat->has_bwc)
+		return 0;
+
+	for (i = 0; i < common->plat->larb_nr; i++)
+		writel_relaxed(common->plat->l1arb[i],
+			       common->base + SMI_L1ARB(i));
+
+	for (i = 0; i < common->plat->misc_nr; i++)
+		writel_relaxed(common->plat->misc[i].value,
+			       common->base + common->plat->misc[i].value);
+	wmb(); /* make sure settings are written */
 	return 0;
 }
 
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/3] dt-bindings: mediatek: Add binding for MT6779 SMI
  2020-01-08  6:41 ` [PATCH v3 1/3] dt-bindings: mediatek: Add binding for MT6779 SMI Ming-Fan Chen
@ 2020-01-08 15:15   ` Rob Herring
  0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-01-08 15:15 UTC (permalink / raw)
  To: Ming-Fan Chen
  Cc: Matthias Brugger, Yong Wu, Evan Green, Joerg Roedel, devicetree,
	linux-kernel, linux-arm-kernel, linux-mediatek, wsd_upstream

On Wed, Jan 08, 2020 at 02:41:29PM +0800, Ming-Fan Chen wrote:
> This patch add description for MT6779 SMI.
> There are GALS in smi-larb but without clock of GALS alone.
> 
> changelog since v2:
> Add GALS for mt6779 in smi-common.txt
> 
> Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
> ---
>  .../memory-controllers/mediatek,smi-common.txt     |    5 +++--
>  .../memory-controllers/mediatek,smi-larb.txt       |    3 ++-
>  2 files changed, 5 insertions(+), 3 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 2/3] memory: mtk-smi: Add basic support for MT6779
  2020-01-08  6:41 ` [PATCH v3 2/3] memory: mtk-smi: Add basic support for MT6779 Ming-Fan Chen
@ 2020-02-12 11:23   ` Matthias Brugger
  0 siblings, 0 replies; 8+ messages in thread
From: Matthias Brugger @ 2020-02-12 11:23 UTC (permalink / raw)
  To: Ming-Fan Chen, Rob Herring, Joerg Roedel
  Cc: Yong Wu, Evan Green, devicetree, linux-kernel, linux-arm-kernel,
	linux-mediatek, wsd_upstream



On 08/01/2020 07:41, Ming-Fan Chen wrote:
> Add smi-larb and smi-common nodes and config_port for MT6779.
> 
> changelog since v2:
> Split basic nodes and config_port support from initial golden setting patch
> 
> Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
>  drivers/memory/mtk-smi.c |   22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index 439d7d8..d0b747a 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -239,6 +239,13 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
>  	.larb_direct_to_common_mask = BIT(8) | BIT(9),      /* bdpsys */
>  };
>  
> +static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
> +	.config_port  = mtk_smi_larb_config_port_gen2_general,
> +	.larb_direct_to_common_mask =
> +		BIT(4) | BIT(6) | BIT(11) | BIT(12) | BIT(13),
> +		/* DUMMY | IPU0 | IPU1 | CCU | MDLA */
> +};
> +
>  static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
>  	.has_gals                   = true,
>  	.config_port                = mtk_smi_larb_config_port_gen2_general,
> @@ -260,6 +267,10 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
>  		.data = &mtk_smi_larb_mt2712
>  	},
>  	{
> +		.compatible = "mediatek,mt6779-smi-larb",
> +		.data = &mtk_smi_larb_mt6779
> +	},
> +	{
>  		.compatible = "mediatek,mt8183-smi-larb",
>  		.data = &mtk_smi_larb_mt8183
>  	},
> @@ -386,6 +397,13 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
>  	.gen = MTK_SMI_GEN2,
>  };
>  
> +static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
> +	.gen		= MTK_SMI_GEN2,
> +	.has_gals	= true,
> +	.bus_sel	= F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
> +			  F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
> +};
> +
>  static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
>  	.gen      = MTK_SMI_GEN2,
>  	.has_gals = true,
> @@ -407,6 +425,10 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
>  		.data = &mtk_smi_common_gen2,
>  	},
>  	{
> +		.compatible = "mediatek,mt6779-smi-common",
> +		.data = &mtk_smi_common_mt6779,
> +	},
> +	{
>  		.compatible = "mediatek,mt8183-smi-common",
>  		.data = &mtk_smi_common_mt8183,
>  	},
> 

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 3/3] memory: mtk-smi: Add bandwidth initial golden setting
  2020-01-08  6:41 ` [PATCH v3 3/3] memory: mtk-smi: Add bandwidth initial golden setting Ming-Fan Chen
@ 2020-02-12 12:17   ` Matthias Brugger
  0 siblings, 0 replies; 8+ messages in thread
From: Matthias Brugger @ 2020-02-12 12:17 UTC (permalink / raw)
  To: Ming-Fan Chen, Rob Herring
  Cc: Yong Wu, Evan Green, Joerg Roedel, devicetree, linux-kernel,
	linux-arm-kernel, linux-mediatek, wsd_upstream



On 08/01/2020 07:41, Ming-Fan Chen wrote:
> SMI bandwidth initial golden setting for MT6779 make sure
> better performance of memory control for multimedia modules.
> 
> changelog since v2:
> Define local variable from long to short
> Merge writel_relaxed into one line
> Remove SMI_LARB_SW_FLAG in smi-larb
> 
> Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c |  118 +++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 117 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index d0b747a..222ac7e 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -41,21 +41,47 @@
>  #define SMI_LARB_NONSEC_CON(id)	(0x380 + ((id) * 4))
>  #define F_MMU_EN		BIT(0)
>  
> +#define SMI_LARB_CMD_THRT_CON	 0x24
> +#define SMI_LARB_OSTDL_PORT	 0x200
> +#define SMI_LARB_OSTDL_PORTx(id) (SMI_LARB_OSTDL_PORT + (((id) & 0x1f) << 2))
> +
>  /* SMI COMMON */
> +#define SMI_L1LEN			0x100
> +#define SMI_L1ARB0			0x104
> +#define SMI_L1ARB(id)			(SMI_L1ARB0 + (((id) & 0x7) << 2))
> +
>  #define SMI_BUS_SEL			0x220
>  #define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
>  /* All are MMU0 defaultly. Only specialize mmu1 here. */
>  #define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
>  
> +#define SMI_M4U_TH			0x234
> +#define SMI_FIFO_TH1			0x238
> +#define SMI_FIFO_TH2			0x23c
> +#define SMI_DCM				0x300
> +#define SMI_DUMMY			0x444
> +
> +#define SMI_LARB_PORT_NR_MAX		32
> +#define SMI_LARB_MISC_NR		1
> +
>  enum mtk_smi_gen {
>  	MTK_SMI_GEN1,
>  	MTK_SMI_GEN2
>  };
>  
> +struct mtk_smi_reg_pair {
> +	u16	offset;
> +	u32	value;
> +};
> +
>  struct mtk_smi_common_plat {
>  	enum mtk_smi_gen gen;
>  	bool             has_gals;
>  	u32              bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
> +	bool                          has_bwc;

bwc = bandwith configuration ?

> +	u8                            larb_nr;
> +	const u16                     *l1arb;
> +	const struct mtk_smi_reg_pair *misc;

maybe encapsulate this in a new struct mtk_smi_common_bwidth_config or something
like this?

>  };
>  
>  struct mtk_smi_larb_gen {
> @@ -63,6 +89,9 @@ struct mtk_smi_larb_gen {
>  	void (*config_port)(struct device *);
>  	unsigned int			larb_direct_to_common_mask;
>  	bool				has_gals;
> +	bool				has_bwc;
> +	const u8			(*ostdl)[SMI_LARB_PORT_NR_MAX];

array of pointers? maybe:
const u8		*ostdl[SMI_LARB_PORT_NR_MAX];

or even better
const u8		**ostdl;


> +	const struct mtk_smi_reg_pair	(*misc)[SMI_LARB_MISC_NR];

Same here.

>  };
>  
>  struct mtk_smi {
> @@ -159,6 +188,8 @@ void mtk_smi_larb_put(struct device *larbdev)
>  static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
>  {
>  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> +	const struct mtk_smi_reg_pair *misc;
> +	const u8 *ostdl;
>  	u32 reg;
>  	int i;
>  
> @@ -170,6 +201,18 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
>  		reg |= F_MMU_EN;
>  		writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
>  	}
> +
> +	if (!larb->larb_gen->has_bwc)

I'd prefer
if (larb->larb_gen->has_bwc) {
...
}

> +		return;
> +
> +	for (i = 0, ostdl = larb->larb_gen->ostdl[larb->larbid];
> +		i < SMI_LARB_PORT_NR_MAX; i++)

ostdl = larb->larb_gen->ostdl[larb->larbid];

for (i = 0, ; i < SMI_LARB_PORT_NR_MAX; i++)


> +		writel_relaxed(ostdl[i], larb->base + SMI_LARB_OSTDL_PORTx(i));
> +
> +	for (i = 0, misc = larb->larb_gen->misc[larb->larbid];
> +		i < SMI_LARB_MISC_NR; i++)

same here.

> +		writel_relaxed(misc[i].value, larb->base + misc[i].offset);

new line here.

> +	wmb(); /* make sure settings are written */
>  }
>  
>  static void mtk_smi_larb_config_port_mt8173(struct device *dev)
> @@ -239,11 +282,53 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
>  	.larb_direct_to_common_mask = BIT(8) | BIT(9),      /* bdpsys */
>  };
>  
> +static const u8 mtk_smi_larb_mt6779_ostdl[][SMI_LARB_PORT_NR_MAX] = {

static const u8 mtk_smi_larb_mt6779_ostdl[MTK_LARB_NR_MAX][SMI_LARB_PORT_NR_MAX]

otherwise if we forget a line, the driver could access random memory.


> +	{0x28, 0x28, 0x01, 0x28, 0x01, 0x01, 0x0a, 0x0a, 0x28,},
> +	{0x28, 0x01, 0x28, 0x28, 0x0a, 0x01, 0x01, 0x0d, 0x0d, 0x07,
> +	 0x01, 0x07, 0x01, 0x28,},
> +	{0x18, 0x01, 0x08, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02,
> +	 0x01, 0x01},
> +	{0x01, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01, 0x04, 0x02, 0x01,
> +	 0x04, 0x01, 0x01, 0x01, 0x01, 0x04, 0x0b, 0x13, 0x14,},
> +	{},
> +	{0x13, 0x0f, 0x0d, 0x07, 0x07, 0x04, 0x03, 0x01, 0x03, 0x01,
> +	 0x05, 0x0c, 0x01, 0x01, 0x08, 0x06, 0x02, 0x01, 0x08, 0x08,
> +	 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
> +	{0x01, 0x01, 0x01,},
> +	{0x01, 0x01, 0x01, 0x01,},
> +	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
> +	{0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x04,
> +	 0x04, 0x01, 0x01, 0x01, 0x02, 0x02, 0x04, 0x02, 0x01, 0x02,
> +	 0x04, 0x02, 0x02, 0x01,},
> +	{0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x1a,
> +	 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x01, 0x02, 0x02, 0x04,
> +	 0x02, 0x0a, 0x02, 0x02, 0x04, 0x02, 0x0a, 0x02, 0x04, 0x02, 0x04,},
> +	{0x01, 0x01, 0x01, 0x01, 0x01,},
> +};
> +
> +static const struct mtk_smi_reg_pair
> +mtk_smi_larb_mt6779_misc[][SMI_LARB_MISC_NR] = {

same here.

> +	{{SMI_LARB_CMD_THRT_CON, 0x370256},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x300256},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x370256},},
> +	{},
> +	{{SMI_LARB_CMD_THRT_CON, 0x300256},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x300256},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x300256},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x300256},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x370256},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x370256},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x370256},},
> +};
> +
>  static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
>  	.config_port  = mtk_smi_larb_config_port_gen2_general,
>  	.larb_direct_to_common_mask =
>  		BIT(4) | BIT(6) | BIT(11) | BIT(12) | BIT(13),
>  		/* DUMMY | IPU0 | IPU1 | CCU | MDLA */
> +	.has_bwc = true,
> +	.ostdl   = mtk_smi_larb_mt6779_ostdl,
> +	.misc    = mtk_smi_larb_mt6779_misc,
>  };
>  
>  static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
> @@ -397,11 +482,30 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
>  	.gen = MTK_SMI_GEN2,
>  };
>  
> +static const u16 mtk_smi_common_mt6779_l1arb[] = {
> +	0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000,
> +};
> +
> +static const struct
> +mtk_smi_reg_pair mtk_smi_common_mt6779_misc[SMI_COMMON_MISC_NR] = {
> +	{SMI_L1LEN, 0xb},
> +	{SMI_M4U_TH, 0xe100e10},
> +	{SMI_FIFO_TH1, 0x506090a},
> +	{SMI_FIFO_TH2, 0x506090a},
> +	{SMI_DCM, 0x4f1},
> +	{SMI_DUMMY, 0x1},
> +};
> +
>  static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
>  	.gen		= MTK_SMI_GEN2,
>  	.has_gals	= true,
>  	.bus_sel	= F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
>  			  F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
> +	.has_bwc	= true,
> +	.larb_nr	= ARRAY_SIZE(mtk_smi_common_mt6779_l1arb),
> +	.l1arb		= mtk_smi_common_mt6779_l1arb,
> +	.misc_nr	= ARRAY_SIZE(mtk_smi_common_mt6779_misc),
> +	.misc		= mtk_smi_common_mt6779_misc,
>  };
>  
>  static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
> @@ -506,7 +610,7 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
>  {
>  	struct mtk_smi *common = dev_get_drvdata(dev);
>  	u32 bus_sel = common->plat->bus_sel;
> -	int ret;
> +	int i, ret;
>  
>  	ret = mtk_smi_clk_enable(common);
>  	if (ret) {
> @@ -516,6 +620,18 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
>  
>  	if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
>  		writel(bus_sel, common->base + SMI_BUS_SEL);
> +
> +	if (!common->plat->has_bwc)
> +		return 0;
> +

if (common->plat->has_bwc) {
...
}
return 0;

> +	for (i = 0; i < common->plat->larb_nr; i++)
> +		writel_relaxed(common->plat->l1arb[i],
> +			       common->base + SMI_L1ARB(i));
> +
> +	for (i = 0; i < common->plat->misc_nr; i++)
> +		writel_relaxed(common->plat->misc[i].value,
> +			       common->base + common->plat->misc[i].value);
> +	wmb(); /* make sure settings are written */
>  	return 0;
>  }
>  
> 

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2020-02-12 12:18 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-08  6:41 memory: mtk-smi: Add bandwidth initial golden setting for MT6779 Ming-Fan Chen
2020-01-08  6:41 ` [PATCH v3 0/3] memory: mtk-smi: Add bandwidth initial golden setting Ming-Fan Chen
2020-01-08  6:41 ` [PATCH v3 1/3] dt-bindings: mediatek: Add binding for MT6779 SMI Ming-Fan Chen
2020-01-08 15:15   ` Rob Herring
2020-01-08  6:41 ` [PATCH v3 2/3] memory: mtk-smi: Add basic support for MT6779 Ming-Fan Chen
2020-02-12 11:23   ` Matthias Brugger
2020-01-08  6:41 ` [PATCH v3 3/3] memory: mtk-smi: Add bandwidth initial golden setting Ming-Fan Chen
2020-02-12 12:17   ` Matthias Brugger

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).