linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
To: stefanr@s5r6.in-berlin.de, greg@kroah.com
Cc: linux1394-devel@lists.sourceforge.net,
	linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Subject: [PATCH] firewire: nosy: switch from 'pci_' to 'dma_' API
Date: Sun, 13 Jun 2021 15:27:43 +0200	[thread overview]
Message-ID: <e1d7fa558f31abf294659a9d4edcc1e4fc065fab.1623590706.git.christophe.jaillet@wanadoo.fr> (raw)

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'add_card()', GFP_KERNEL can be used because
this flag is already used a few lines above and no lock is taken in the
between.

While at it, also remove some useless casting.

@@ @@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@ @@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@ @@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@ @@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
If needed, see post from Christoph Hellwig on the kernel-janitors ML:
   https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
---
 drivers/firewire/nosy.c | 43 +++++++++++++++++++++++------------------
 1 file changed, 24 insertions(+), 19 deletions(-)

diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c
index 88ed971e32c0..b0d671db178a 100644
--- a/drivers/firewire/nosy.c
+++ b/drivers/firewire/nosy.c
@@ -511,12 +511,12 @@ remove_card(struct pci_dev *dev)
 		wake_up_interruptible(&client->buffer.wait);
 	spin_unlock_irq(&lynx->client_list_lock);
 
-	pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
-			    lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
-	pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
-			    lynx->rcv_pcl, lynx->rcv_pcl_bus);
-	pci_free_consistent(lynx->pci_device, PAGE_SIZE,
-			    lynx->rcv_buffer, lynx->rcv_buffer_bus);
+	dma_free_coherent(&lynx->pci_device->dev, sizeof(struct pcl),
+			  lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
+	dma_free_coherent(&lynx->pci_device->dev, sizeof(struct pcl),
+			  lynx->rcv_pcl, lynx->rcv_pcl_bus);
+	dma_free_coherent(&lynx->pci_device->dev, PAGE_SIZE, lynx->rcv_buffer,
+			  lynx->rcv_buffer_bus);
 
 	iounmap(lynx->registers);
 	pci_disable_device(dev);
@@ -532,7 +532,7 @@ add_card(struct pci_dev *dev, const struct pci_device_id *unused)
 	u32 p, end;
 	int ret, i;
 
-	if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask(&dev->dev, DMA_BIT_MASK(32))) {
 		dev_err(&dev->dev,
 		    "DMA address limits not supported for PCILynx hardware\n");
 		return -ENXIO;
@@ -564,12 +564,16 @@ add_card(struct pci_dev *dev, const struct pci_device_id *unused)
 		goto fail_deallocate_lynx;
 	}
 
-	lynx->rcv_start_pcl = pci_alloc_consistent(lynx->pci_device,
-				sizeof(struct pcl), &lynx->rcv_start_pcl_bus);
-	lynx->rcv_pcl = pci_alloc_consistent(lynx->pci_device,
-				sizeof(struct pcl), &lynx->rcv_pcl_bus);
-	lynx->rcv_buffer = pci_alloc_consistent(lynx->pci_device,
-				RCV_BUFFER_SIZE, &lynx->rcv_buffer_bus);
+	lynx->rcv_start_pcl = dma_alloc_coherent(&lynx->pci_device->dev,
+						 sizeof(struct pcl),
+						 &lynx->rcv_start_pcl_bus,
+						 GFP_KERNEL);
+	lynx->rcv_pcl = dma_alloc_coherent(&lynx->pci_device->dev,
+					   sizeof(struct pcl),
+					   &lynx->rcv_pcl_bus, GFP_KERNEL);
+	lynx->rcv_buffer = dma_alloc_coherent(&lynx->pci_device->dev,
+					      RCV_BUFFER_SIZE,
+					      &lynx->rcv_buffer_bus, GFP_KERNEL);
 	if (lynx->rcv_start_pcl == NULL ||
 	    lynx->rcv_pcl == NULL ||
 	    lynx->rcv_buffer == NULL) {
@@ -667,14 +671,15 @@ add_card(struct pci_dev *dev, const struct pci_device_id *unused)
 
 fail_deallocate_buffers:
 	if (lynx->rcv_start_pcl)
-		pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
-				lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
+		dma_free_coherent(&lynx->pci_device->dev, sizeof(struct pcl),
+				  lynx->rcv_start_pcl,
+				  lynx->rcv_start_pcl_bus);
 	if (lynx->rcv_pcl)
-		pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
-				lynx->rcv_pcl, lynx->rcv_pcl_bus);
+		dma_free_coherent(&lynx->pci_device->dev, sizeof(struct pcl),
+				  lynx->rcv_pcl, lynx->rcv_pcl_bus);
 	if (lynx->rcv_buffer)
-		pci_free_consistent(lynx->pci_device, PAGE_SIZE,
-				lynx->rcv_buffer, lynx->rcv_buffer_bus);
+		dma_free_coherent(&lynx->pci_device->dev, PAGE_SIZE,
+				  lynx->rcv_buffer, lynx->rcv_buffer_bus);
 	iounmap(lynx->registers);
 
 fail_deallocate_lynx:
-- 
2.30.2


             reply	other threads:[~2021-06-13 13:28 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-13 13:27 Christophe JAILLET [this message]
2021-07-05 19:46 ` [PATCH] firewire: nosy: switch from 'pci_' to 'dma_' API Stefan Richter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e1d7fa558f31abf294659a9d4edcc1e4fc065fab.1623590706.git.christophe.jaillet@wanadoo.fr \
    --to=christophe.jaillet@wanadoo.fr \
    --cc=greg@kroah.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux1394-devel@lists.sourceforge.net \
    --cc=stefanr@s5r6.in-berlin.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).